This adds extra checks to make sure the inode map we are caching really
belongs to a FS root instead of a special relocation tree.  It
prevents crashes during balancing operations.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The free space cache uses only one page for crcs right now,
which means we can't have a cache file bigger than the
crcs we can fit in the first page.  This adds a check to
enforce that restriction.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

The nitems counter needs to start at zero

Signed-off-by: Chris Mason <chris.mason@oracle.com>

The current scrub implementation reuses bios and pages as often as possible,
allocating them only on start and releasing them when finished. This leads
to more problems with the block layer than it's worth. The elevator gets
confused when there are more pages added to the bio than bi_size suggests.
This patch completely rips out the reuse of bios and pages and allocates
them freshly for each submit.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Maosn <chris.mason@oracle.com>

git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work

 into for-linus

Conflicts:
	fs/btrfs/disk-io.c
	fs/btrfs/extent-tree.c
	fs/btrfs/free-space-cache.c
	fs/btrfs/inode.c
	fs/btrfs/transaction.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>

write_dev_supers was changed to use RCU to protect the list of
devices, but it was then sleeping while it actually wrote the supers.
This fixes it to just use the mutex, since we really don't any
concurrency in write_dev_supers anyway.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

For a filesystem that has lots of files in it, the first time we mount
it with free ino caching support, it can take quite a long time to
setup the caching before we can create new files.

Here we fill the cache with [highest_ino, BTRFS_LAST_FREE_OBJECTID]
before we start the caching thread to search through the extent tree.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

scrub_page collects several pages into one bio as long as they are physically
contiguous. As we only save one logical address for the whole bio, don't
collect pages that are physically contiguous but logically discontiguous.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The btrfs releasepage function depends on ENOMEM coming
back when it is called atomic.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

This will detect small random writes into files and
queue the up for an auto defrag process.  It isn't well suited to
database workloads yet, but works for smaller files such as rpm, sqlite
or bdb databases.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

Conflicts:
	fs/btrfs/tree-log.c
	fs/btrfs/volumes.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>

fs_devices->devices is only updated on remove and add device paths, so we can
use rcu to protect it in the reader side

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Drop device_list_mutex for the reader side  on clone_fs_devices and
btrfs_rm_device pathes since the fs_info->volume_mutex can ensure the device
list is not updated

btrfs_close_extra_devices is the initialized path, we can not add or remove
device at this time, so we can simply drop the mutex safely, like other
initialized function does(add_missing_dev, __find_device, __btrfs_open_devices
...).

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

On remove device path, it updates device->dev_alloc_list but does not hold
chunk lock

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

On btrfs_congested_fn and __unplug_io_fn paths, we should hold
device_list_mutex to avoid remove/add device path to
update fs_devices->devices

On __btrfs_close_devices and btrfs_prepare_sprout paths, the devices in
fs_devices->devices or fs_devices->devices is updated, so we should hold
the mutex to avoid the reader side to reach them

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

'bh' is forgot to release if no error is detected

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

merge_state can free the current state if it can be merged with the next node,
but in set_extent_bit(), after merge_state, we still use the current extent to
get the next node and cache it into cached_state

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

It doesn't allocate extent_state and check the result properly:
- in set_extent_bit, it doesn't allocate extent_state if the path is not
  allowed wait

- in clear_extent_bit, it doesn't check the result after atomic-ly allocate,
  we trigger BUG_ON() if it's fail

- if allocate fail, we trigger BUG_ON instead of returning -ENOMEM since
  the return value of clear_extent_bit() is ignored by many callers

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Btrfs_alloc_path should be matched with btrfs_free_path in error-handling code.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/

)

// <smpl>
@r exists@
local idexpression struct btrfs_path * x;
expression ra,rb;
position p1,p2;
@@

x = btrfs_alloc_path@p1(...)
...  when != btrfs_free_path(x,...)
     when != if (...) { ... btrfs_free_path(x,...) ...}
     when != x = ra
if(...) { ... when != x = rb
     when forall
     when != btrfs_free_path(x,...)
 \(return <+...x...+>; \| return@p2...; \) }

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

cocci.print_main("alloc",p1)
cocci.print_secs("return",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

If return value of btrfs_inc_extent_ref() is not 0, BUG() is called.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When read_one_inode() fails, error code is returned to caller instead
of BUG_ON().

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Currently, btrfs_truncate_item and btrfs_extend_item returns only 0.
So, the check by BUG_ON in the caller is unnecessary.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The error code is returned instead of calling BUG_ON when
btrfs_del_item returns the error.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The error code is returned instead of calling BUG_ON when
btrfs_previous_item returns the error.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Observed as a large delay when --mixed filesystem is filled up.
Test example:
1. create tiny --mixed FS:
   $ dd if=/dev/zero of=2G.img seek=$((2048 * 1024 * 1024 - 1)) count=1 bs=1
   $ mkfs.btrfs --mixed 2G.img
   $ mount -oloop 2G.img /mnt/ut/
2. Try to fill it up:
   $ dd if=/dev/urandom of=10M.file bs=10240 count=1024
   $ seq 1 256 | while read file_no; do echo $file_no; time cp 10M.file ${file_no}.copy; done

Up to '200.copy' it goes fast, but when disk fills-up each -ENOSPC
message takes 3 seconds to pop-up _every_ ENOSPC (and in usermode linux
it's even more: 30-60 seconds!). (Maybe, time depends on kernel's timer resolution).

No IO, no CPU load, just rescheduling. Some debugging revealed busy spinning
in shrink_delalloc.

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

In 2008, commit b4f6c45d

 dropped the use
of fs/btrfs/version.sh, but left the script behind. Kill it.

Commit by Jamey Sharp and Josh Triplett.

Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Btrfs's tree search ioctl has a field to indicate that no more than a
given number of records should be returned. The ioctl doesn't honour
this, as the tested value is not incremented until the end of the
copy_to_sk function. This patch removes an unnecessary local variable,
and updates the num_found counter as each key is found in the tree.

Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

240f62c8

 replaced the node_lock with rcu_read_lock, but forgot
to remove the actual lock in the data structure. Remove it here.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

On lookup we only want to read the inode item, so leave the path spinning.  Also
we're just wholesale reading the leaf off, so map the leaf so we don't do a
bunch of kmap/kunmaps.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

If there are duplicate entries in the free space cache, discard the entire cache
and load it the old fashioned way.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

If we have a very large filesystem, we can spend a lot of time in
find_free_extent just trying to allocate from empty block groups.  So instead
check to see if the block group even has enough space for the allocation, and if
not go on to the next block group.

Signed-off-by: Josef Bacik <josef@redhat.com>

Our readahead is sort of sloppy, and really isn't always needed.  For example if
ls is doing a stating ls (which is the default) it's going to stat in non-disk
order, so if say you have a directory with a stupid amount of files, readahead
is going to do nothing but waste time in the case of doing the stat.  Taking the
unconditional readahead out made my test go from 57 minutes to 36 minutes.  This
means that everywhere we do loop through the tree we want to make sure we do set
path->reada properly, so I went through and found all of the places where we
loop through the path and set reada to 1.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

When the fs is super full and we unmount the fs, we could get stuck in this
thing where unmount is waiting for the caching kthread to make progress and the
caching kthread keeps scheduling because we're in the middle of a commit.  So
instead just let the caching kthread keep going and only yeild if
need_resched().  This makes my horrible umount case go from taking up to 10
minutes to taking less than 20 seconds.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull.  In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable.  So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

We have a bit of debugging in btrfs_search_slot to make sure the level of the
cow block is the same as the original block we were cow'ing.  I don't think I've
ever seen this tripped, so kill it.  This saves us 2 kmap's per level in our
search.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

If we have particularly full nodes, we could call btrfs_node_blockptr up to 32
times, which is 32 pairs of kmap/kunmap, which _sucks_.  So go ahead and map the
extent buffer while we look for readahead targets.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

In count_range_bits we are adjusting total_bytes based on the range we are
searching for, but we don't adjust the range start according to the range we are
searching for, which makes for weird results.  For example, if the range

[0-8192]

is set DELALLOC, but I search for 4096-8192, I will get back 4096 for the number
of bytes found, but the range_start will be 0, which makes it look like the
range is [0-4096].  So instead set range_start = max(cur_start, state->start).
This makes everything come out right.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

The ceph guys keep running into problems where we have space reserved in our
orphan block rsv when freeing it up.  This is because they tend to do snapshots
alot, so their truncates tend to use a bunch of space, so when we go to do
things like update the inode we have to steal reservation space in order to make
the reservation happen.  This happens because truncate can use as much space as
it freaking feels like, but we still have to hold space for removing the orphan
item and updating the inode, which will definitely always happen.  So in order
to fix this we need to split all of the reservation stuf up.  So with this patch
we have

1) The orphan block reserve which only holds the space for deleting our orphan
item when everything is over.

2) The truncate block reserve which gets allocated and used specifically for the
space that the truncate will use on a per truncate basis.

3) The transaction will always have 1 item's worth of data reserved so we can
update the inode normally.

Hopefully this will make the ceph problem go away.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>