- Nov 09, 2013
-
-
Alex Deucher authored
This just updates the firmware loading functions to look for the appropriate firmware files for hawaii. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
The formula needs to be adjusted since there are 4 RBs per SH rather than 2 as on previous asics. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
The golden register settings are optimal settings for certain registers from the hardware team. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Hawaii uses a different tiling configuration. Add support for it. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Skip programming a register that was removed and adjust the mask of the VM client status. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
This adds the hawaii asic specific configuration details. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Hawaii is a new CI-based dGPU. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Spotted by Brad Smith when porting to OpenBSD. Noticed-by:
Brad Smith <brad@comstyle.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
The new HDP flush method doesn't seem to work reliably on sDMA either, so use the old method here too. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ilija Hadzic authored
To plug the VRAM memory leak (see previous patch for details) we must unpin the frame buffer when disabling the CRTC. This warrants the addition of disable function for legacy CRTC, which puts the CRTC in DPMS-OFF state and unpins the frame buffer if there is one associated with the CRTC. Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ilija Hadzic authored
When drm_helper_disable_unused_functions calls disable function of the CRTC, it also sets the crtc->fb pointer to NULL. This can later (when the mode on that CRTC is setup again from user space) cause ***_do_set_base functions to "think" that there is no old buffer and skip the unpinning code. Consequently, the buffer that has been NULL-ified in drm_helper_disable_unused_functions will never be unpinned causing a leak in VRAM. This patch plugs the leak by unpinning the frame buffer in crtc_disable function. Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Anssi Hannula authored
The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Tested-by:
Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- Nov 08, 2013
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
-
Dave Airlie authored
Though I'm not really happy with how ugly this code is now. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Emil Velikov authored
The present code assumes that optimus is present whenever two VGA (PCI_CLASS_DISPLAY_VGA) devices are present. This does not seem to be the case of newer laptops with optimus, in which case the nvidia gpu is a PCI_CLASS_DISPLAY_3D device. Rework the logic so that we count both VGA and 3D devices, when contemplating if optimus is present on the platform. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70208 Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next - Ilia's PMPEG improvements - MSI fixes, and another attempt at enabling by default - Initial GK208 support, just modesetting - "Old" PM code gone, new infrastructure and various different stages of support (depending which chipset / ram type etc) is in its place. This includes support that goes beyond what the previous code was capable of. User control has been deliberately sabotaged, it's not safe to use still. - Thermal management / fan control that's been present for a while is turned ON by default now. - Misc other fixes that have accumulated * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (74 commits) drm/nouveau/fb: implement various bits of work towards memory reclocking drm/nouveau: implement a simple sysfs interface to new pm code drm/nouveau/device: initial control object class, with pstate control methods drm/nouveau/clk: implement power state and engine clock control in core drm/nouveau/volt: implement voltage control in core drm/nouveau/bios: parsing for various tables required for power management drm/nouveau/perfmon: initial infrastructure to expose performance counters drm/nouveau/bus: add interfaces/helpers for sequencer drm/nouveau/bus: make external class definitions pointers drm/nouveau/pwr: initial implementation drm/nouveau/therm: update target fanspeed outside of therm lock drm/nouveau/therm: automatic mode by default drm/nouveau/therm: no toggle fan control either if we can't guarantee no pwm connected drm/nvc0/therm: allow fan control if we've killed the vbios ppwr ucode drm/nouveau/therm: if no bios trip/linear info, default to perf-suggested speed drm/nouveau/therm: add hook for clk to suggest fanspeed to therm drm/nouveau/pwr: assign a subdev id for upcoming implementation drm/nouveau/gpio: return different error code for not found vs invalid drm/nouveau/drm/pm: remove everything except the hwmon interfaces to THERM drm/nouveau/core: make all info-level messages silent for runtime pm ...
-
Dave Airlie authored
This isn't useful anymore. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ben Skeggs authored
Not even remotely ready for the vast majority of the world. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
User control of this has been hard-coded as disabled for now. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Internal use only at this point. Userspace later. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
THERM will use this before it exists. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Removes the need for special handling of messages in init paths. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-