Fix potential races in kvm_psci_vcpu_on() by taking the kvm->lock
mutex.  In general, it's a bad idea to allow more than one PSCI_CPU_ON
to process the same target VCPU at the same time.  One such problem
that may arise is that one PSCI_CPU_ON could be resetting the target
vcpu, which fills the entire sys_regs array with a temporary value
including the MPIDR register, while another looks up the VCPU based
on the MPIDR value, resulting in no target VCPU found.  Resolves both
races found with the kvm-unit-tests/arm/psci unit test.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Reported-by: Levente Kurusa <lkurusa@redhat.com>
Suggested-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Now that we support both timers and PMU reporting interrupts
to userspace, we can advertise this support.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

When not using an in-kernel VGIC, but instead emulating an interrupt
controller in userspace, we should report the PMU overflow status to
that userspace interrupt controller using the KVM_CAP_ARM_USER_IRQ
feature.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

If you're running with a userspace gic or other interrupt controller
(that is no vgic in the kernel), then you have so far not been able to
use the architected timers, because the output of the architected
timers, which are driven inside the kernel, was a kernel-only construct
between the arch timer code and the vgic.

This patch implements the new KVM_CAP_ARM_USER_IRQ feature, where we use a
side channel on the kvm_run structure, run->s.regs.device_irq_level, to
always notify userspace of the timer output levels when using a userspace
irqchip.

This works by ensuring that before we enter the guest, if the timer
output level has changed compared to what we last told userspace, we
don't enter the guest, but instead return to userspace to notify it of
the new level.  If we are exiting, because of an MMIO for example, and
the level changed at the same time, the value is also updated and
userspace can sample the line as it needs.  This is nicely achieved
simply always updating the timer_irq_level field after the main run
loop.

Note that the kvm_timer_update_irq trace event is changed to show the
host IRQ number for the timer instead of the guest IRQ number, because
the kernel no longer know which IRQ userspace wires up the timer signal
to.

Also note that this patch implements all required functionality but does
not yet advertise the capability.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

We have 2 modes for dealing with interrupts in the ARM world. We can
either handle them all using hardware acceleration through the vgic or
we can emulate a gic in user space and only drive CPU IRQ pins from
there.

Unfortunately, when driving IRQs from user space, we never tell user
space about events from devices emulated inside the kernel, which may
result in interrupt line state changes, so we lose out on for example
timer and PMU events if we run with user space gic emulation.

Define an ABI to publish such device output levels to userspace.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Currently we check if we have an in-kernel irqchip and if the vgic was
properly implemented several places in the arch timer code.  But, we
already predicate our enablement of the arm timers on having a valid
and initialized gic, so we can simply check if the timers are enabled or
not.

This also gets rid of the ugly "error that's not an error but used to
signal that the timer shouldn't poke the gic" construct we have.

Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

In order to help people understanding the hyp-stub API that exists
between the host kernel and the hypervisor mode (whether a hypervisor
has been installed or not), let's document said API.

As with any form of documentation, I expect it to become obsolete
and completely misleading within 20 minutes after having being merged.

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

We now return HVC_STUB_ERR when a stub hypercall fails, but we
leave whatever was in r0 on success. Zeroing it on return seems
like a good idea.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

We now return HVC_STUB_ERR when a stub hypercall fails, but we
leave whatever was in x0 on success. Zeroing it on return seems
like a good idea.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Nobody is using __hyp_get_vectors anymore, so let's remove both
implementations (hyp-stub and KVM).

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Nobody is using __hyp_get_vectors anymore, so let's remove both
implementations (hyp-stub and KVM).

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

When the compressed image needs to be relocated to avoid being
overwritten by the decompression process, we need to relocate
the hyp vectors as well so that we can find them once the
decompression has taken effect.

For that, we perform the following calculation:
	u32 v = __hyp_get_vectors();
	v += offset;
	__hyp_set_vectors(v);

But we're guaranteed that the initial value of v as returned by
__hyp_get_vectors is always __hyp_stub_vectors, because we have
just set it by calling __hyp_stub_install.

So let's remove the use of __hyp_get_vectors, and directly use
__hyp_stub_vectors instead.

Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Instead of trying to compare the value given by __hyp_get_vectors(),
which doesn't offer any real guarantee to be the stub's address, use
HVC_RESET_VECTORS to make sure we're in a sane state to reinstall
KVM across PM events.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

With __cpu_reset_hyp_mode having become fairly dumb, there is no
need for kvm_get_idmap_start anymore.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

__cpu_reset_hyp_mode doesn't need to be passed any argument now,
as the hyp-stub implementations are self-contained, and is now
reduced to just calling __hyp_reset_vectors(). Let's drop the
wrapper and use the stub hypercall directly.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Should kvm_reboot() be invoked while guest is running, an IPI
wil be issued, forcing the guest to exit and HYP being reset to
the stubs. We will then try to reenter the guest, only to get
an error (HVC_STUB_ERR).

This patch allows this case to be gracefully handled by exiting
the run loop.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Another missing stub hypercall is HVC_SOFT_RESTART. It turns out
that it is pretty easy to implement in terms of HVC_RESET_VECTORS
(since it needs to turn the MMU off).

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

We are now able to use the hyp stub to reset HYP mode. Time to
kiss __kvm_hyp_reset goodbye, and use __hyp_reset_vectors.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

We now have a full hyp-stub implementation in the KVM init code,
but the main KVM code only supports HVC_GET_VECTORS, which is not
enough.

Instead of reinventing the wheel, let's reuse the init implementation
by branching to the idmap page when called with a hyp-stub hypercall.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Now that we have an infrastructure to handle hypercalls in the KVM
init code, let's implement HVC_GET_VECTORS there.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

In order to restore HYP mode to its original condition, KVM currently
implements __kvm_hyp_reset(). As we're moving towards a hyp-stub
defined API, it becomes necessary to implement HVC_RESET_VECTORS.

This patch adds the HVC_RESET_VECTORS hypercall to the KVM init
code, which so far lacked any form of hypercall support.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Let's define a new stub hypercall that resets the HYP configuration
to its default: hyp-stub vectors, and MMU disabled.

Of course, for the hyp-stub itself, this is a trivial no-op.
Hypervisors will have a bit more work to do.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Define a standard return value to be returned when a hyp stub
call fails.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

The KVM code needs to be able to compute the address of
symbols in its idmap page (the equivalent of a virt_to_idmap()
call). Unfortunately, virt_to_idmap is slightly complicated,
depending on the use of arch_phys_to_idmap_offset or not, and
none of that is readily available at HYP.

Instead, expose a single kimage_voffset variable which contains the
offset between a kernel VA and its idmap address, enabling the
VA->IDMAP conversion. This allows the KVM code to behave similarily
to its arm64 counterpart.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

It is not really obvious why the restart address should be in r3
when communicated to the hyp-stub. r1 should be perfectly adequate,
and consistent with the rest of the code.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

cpu_v7_reset() now takes a second parameter indicating whether
we should reboot in HYP or not. Update the documentation to
reflect this.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

The conversion of the HYP stub ABI to something similar to arm64
left the KVM code broken, as it doesn't know about the new
stub numbering. Let's move the various #defines to virt.h, and
let KVM use HVC_GET_VECTORS.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

When we soft-reboot (eg, kexec) from one kernel into the next, we need
to ensure that we enter the new kernel in the same processor mode as
when we were entered, so that (eg) the new kernel can install its own
hypervisor - the old kernel's hypervisor will have been overwritten.

In order to do this, we need to pass a flag to cpu_reset() so it knows
what to do, and we need to modify the kernel's own hypervisor stub to
allow it to handle a soft-reboot.

As we are always guaranteed to install our own hypervisor if we're
entered in HYP32 mode, and KVM will have moved itself out of the way
on kexec/normal reboot, we can assume that our hypervisor is in place
when we want to kexec, so changing our hypervisor API should not be a
problem.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Improve the hyp-stub ABI to allow it to do more than just get/set the
vectors.  We follow the example in ARM64, where r0 is used as an opcode
with the other registers as an argument.

Tested-by: Keerthy <j-keerthy@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Another missing stub hypercall is HVC_SOFT_RESTART. It turns out
that it is pretty easy to implement in terms of HVC_RESET_VECTORS
(since it needs to turn the MMU off).

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

We are now able to use the hyp stub to reset HYP mode. Time to
kiss __kvm_hyp_reset goodbye, and use __hyp_reset_vectors.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

We now have a full hyp-stub implementation in the KVM init code,
but the main KVM code only supports HVC_GET_VECTORS, which is not
enough.

Instead of reinventing the wheel, let's reuse the init implementation
by branching to the idmap page when called with a hyp-stub hypercall.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Now that we have an infrastructure to handle hypercalls in the KVM
init code, let's implement HVC_GET_VECTORS there.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

In order to restore HYP mode to its original condition, KVM currently
implements __kvm_hyp_reset(). As we're moving towards a hyp-stub
defined API, it becomes necessary to implement HVC_RESET_VECTORS.

This patch adds the HVC_RESET_VECTORS hypercall to the KVM init
code, which so far lacked any form of hypercall support.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Let's define a new stub hypercall that resets the HYP configuration
to its default: hyp-stub vectors, and MMU disabled.

Of course, for the hyp-stub itself, this is a trivial no-op.
Hypervisors will have a bit more work to do.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Comments in asm/virt.h are slightly out of date, so let's align
them with the new behaviour of the code.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

Define a standard return value to be returned when a hyp stub
call fails, and make KVM use it for ARM_EXCEPTION_HYP_GONE
(instead of using a KVM-specific value).

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

The EL2 code is not corrupting lr anymore, so don't bother preserving
it in the EL1 trampoline code.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>

At the moment, we only save/restore lr if on VHE, as we rely only
the EL1 code to have preserved it in the non-VHE case.

As we're about to get rid of the latter, let's move the save/restore
code to the do_el2_call macro, unifying both code paths.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>