It got missed.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The probe calls pm_runtime_set_active in the probe, but
has never called dw9807_vcm_resume.
Without a regulator this causes no issue as it just
instructs the VCM to move to the idle position and power
down. With a regulator the pm_runtime_idle calls
dw9807_vcm_suspend, and we get a mismatch in the regulator framework.

Make the active state conditional on having a regulator.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Add support for the Measurement Specialities temperature and pressure
sensors to the i2c-sensor overlay. The supported devices are MS5637,
MS5803, MS5805, MS5837 and MS8607.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

CM4 uses BCM54210PE, which supports 2 additional LEDs, choosing LED3
for the amber LED because it shows activity by default (LED4 is not
connected). However, this makes it uncontrollable by the eth_led<n>
dtparams which target LEDs 1+2.

Solve the problem by making LEDs 3+4 mirror LEDs 1+2 (which is much
simpler than adding baseboard-specific overrides, but comes with a
risk of making one of the LEDs redundant).

See: https://github.com/raspberrypi/linux/issues/5289



Signed-off-by: Phil Elwell <phil@raspberrypi.com>

New overlay to support the Sony IMX708 image sensor.
This includes a VCM for lens control.
Also adds support to the camera mux overlays.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Adds the IMX708 image sensor driver to the defconfigs.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The imx708 is a 12MP MIPI sensor with a 16:9 aspect ratio, here using
two CSI-2 lanes. It is a "quad Bayer" sensor with all 3 modes offering
10-bit output:

12MP: 4608x2592 up to 14.35fps (full FoV)
1080p: 2304x1296 up to 56.02fps (full FoV)
720p: 1536x864 up to 120.12fps (cropped)

This imx708 sensor driver is based heavily on the imx477 driver and
has been tested on the Raspberry Pi platform using libcamera.

Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Add YAML devicetree binding for IMX708 CMOS image sensor.
Let's also add a MAINTAINERS entry for the binding and driver.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The power up/down sequence is already ramped. Extend this to
the first user movement as well, as this will generally avoid
the "tick" noises due to rapid movements and overshooting.
Subsequent movements are generally smaller and so don't cause
issues.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Uses the regulator notifier framework so that the current
focus position will be restored whenever any user of the
regulator powers it up. This means that should the VCM
and sensor share a common regulator then starting the sensor
will automatically restore the default position. If they
have independent regulators then it will behave be powered
up when the VCM subdev is opened.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The VCM driver will often be controlled via a regulator,
therefore add in the relevant DT hooks.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The DW9817 is effectively the same as DW9807 from a programming
interface, however it drives +/-100mA instead of 0-100mA. This means
that the power on ramp needs to take the lens from the midpoint, and
power off return it there. It also changes the default position for
the module.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The DW9817 is programmatically the same as DW9807, but
the output drive is a bi-directional -100 to +100mA
instead of 0-100mA.

Add the appropriate compativle string.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Upstream commit a1f4626b

.

Convert the old text based dw9807-vcm chip DT bindings to json-schema.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The brcm,function property must be set in the overlay fragment too -
otherwise the parametrization won't work. At least that's the case for
bcm2711-rpi-cm4.dts which starts with empty properties:

&gpio {
        audio_pins: audio_pins {
                brcm,pins = <>;
                brcm,function = <>;
        };
};

This was broken since a56df85d

.

Signed-off-by: Krzysztof Kotlenga <k.kotlenga@sims.pl>

YUV images can either be presented as one allocation with offsets
for the different planes, or multiple allocations with 0 offsets.

The driver only ever calls drm_fb_[dma|cma]_get_gem_obj with plane
index 0, therefore any application using the second approach was
incorrectly rendered.

Correctly determine the address for each plane, removing the
assumption that the base address is the same for each.

Fixes: fc04023f

 ("drm/vc4: Add support for YUV planes.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Link: https://lore.kernel.org/r/20221215172906.338769943@linuxfoundation.org


Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7e630356 upstream.

Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.

Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.

Fixes: df727d45

 (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f33bcc50 upstream.

Currently the check against the max value for the control is being
applied after the value has had the minimum applied and been masked. But
the max value simply indicates the number of volume levels on an SX
control, and as such should just be applied on the raw value.

Fixes: 97eea946

 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-1-ckeepax@opensource.cirrus.com


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a56ea614

 ]

If the prp2 field is not filled in nvme_setup_prp_simple(), the prp2
field is garbage data. According to nvme spec, the prp2 is reserved if
the data transfer does not cross a memory page boundary, so clear it to
zero if it is not used.

Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 517e6a30

 ]

Per syzbot it is possible for perf_pending_task() to run after the
event is free()'d. There are two related but distinct cases:

 - the task_work was already queued before destroying the event;
 - destroying the event itself queues the task_work.

The first cannot be solved using task_work_cancel() since
perf_release() itself might be called from a task_work (____fput),
which means the current->task_works list is already empty and
task_work_cancel() won't be able to find the perf_pending_task()
entry.

The simplest alternative is extending the perf_event lifetime to cover
the task_work.

The second is just silly, queueing a task_work while you know the
event is going away makes no sense and is easily avoided by
re-arranging how the event is marked STATE_DEAD and ensuring it goes
through STATE_OFF on the way down.

Reported-by:  <syzbot+9228d6098455bb209ec8@syzkaller.appspotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3d1bb6cc

 ]

The table in the datasheet actually shows the volume values in the wrong
order, with the two -3dB values being reversed. This appears to have
caused the lower of the two values to be used in the driver when the
higher should have been, correct this mixup.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-2-ckeepax@opensource.cirrus.com


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit df727d45 ]

Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html

),
or any other method that would do a one-time setup during early boot.

Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a8e3bd2

 ]

Microchip USB Analyzer can activate the internal termination resistors
by setting the "termination" option ON, or OFF to to deactivate them.
As I've observed, both with my oscilloscope and captured USB packets
below, you must send "0" to turn it ON, and "1" to turn it OFF.

From the schematics in the user's guide, I can confirm that you must
drive the CAN_RES signal LOW "0" to activate the resistors.

Reverse the argument value of usb_msg.termination to fix this.

These are the two commands sequence, ON then OFF.

> No.     Time           Source                Destination           Protocol Length Info
>       1 0.000000       host                  1.3.1                 USB      46     URB_BULK out
>
> Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80000000000000000000000000000000000a8
>
> No.     Time           Source                Destination           Protocol Length Info
>       2 4.372547       host                  1.3.1                 USB      46     URB_BULK out
>
> Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80100000000000000000000000000000000a9

Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com


Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 26e8f6a7

 ]

bitfield mode in ocr register has only 2 bits not 3, so correct
the OCR_MODE_MASK define.

Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de


Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 11780e37

 ]

If the system is restarted via kexec(), the peripherals do not start
with a known state.

If the previous system had enabled an IRQs we will receive unexected
IRQs that can lock the system.

[   28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s!
[swapper/0:0]
[   28.109263] Modules linked in:
[   28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b
[   28.109284] Hardware name: Google Elm (DT)
[   28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS
		BTYPE=--)
[   28.109298] pc : __do_softirq+0xa0/0x388
[   28.109309] lr : __do_softirq+0x70/0x388
[   28.109316] sp : ffffffc008003ee0
[   28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27:
0000000000000080
[   28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24:
ffffffefa7b47480
[   28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21:
ffffffefa7b0fa40
[   28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18:
0000000000065b6b
[   28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15:
00000000000001b8
[   28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12:
0000000000057e91
[   28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 :
ffffffefa7b47480
[   28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 :
0000000000000000
[   28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 :
000000000000000f
[   28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 :
0000000001ac65c5
[   28.109441] Call trace:
[   28.109447]  __do_softirq+0xa0/0x388
[   28.109454]  irq_exit+0xc0/0xe0
[   28.109464]  handle_domain_irq+0x68/0x90
[   28.109473]  gic_handle_irq+0xac/0xf0
[   28.109480]  call_on_irq_stack+0x28/0x50
[   28.109488]  do_interrupt_handler+0x44/0x58
[   28.109496]  el1_interrupt+0x30/0x58
[   28.109506]  el1h_64_irq_handler+0x18/0x24
[   28.109512]  el1h_64_irq+0x7c/0x80
[   28.109519]  arch_local_irq_enable+0xc/0x18
[   28.109529]  default_idle_call+0x40/0x140
[   28.109539]  do_idle+0x108/0x290
[   28.109547]  cpu_startup_entry+0x2c/0x30
[   28.109554]  rest_init+0xe8/0xf8
[   28.109562]  arch_call_rest_init+0x18/0x24
[   28.109571]  start_kernel+0x338/0x42c
[   28.109578]  __primary_switched+0xbc/0xc4
[   28.109588] Kernel panic - not syncing: softlockup: hung tasks

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.org


Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 689eb2f1

 ]

Using page size as max_entries when probing ring buffer map, else the
probe may fail on host with 64KB page size (e.g., an ARM64 host).

After the fix, the output of "bpftool feature" on above host will be
correct.

Before :
    eBPF map_type ringbuf is NOT available
    eBPF map_type user_ringbuf is NOT available

After :
    eBPF map_type ringbuf is available
    eBPF map_type user_ringbuf is available

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-2-houtao@huaweicloud.com


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 97eea946

 ]

The bounds checks in snd_soc_put_volsw_sx() are only being applied to the
first channel, meaning it is possible to write out of bounds values to the
second channel in stereo controls. Add appropriate checks.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-2-broonie@kernel.org


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b776c4a4

 ]

There may be failure when start 1 channel recording after
8 channels recording. The reason is that the CHnF
flags are not cleared successfully by software reset.

This issue is triggerred by the change of clearing
software reset bit.

CHnF flags are write 1 clear bits. Clear them by force
write.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-2-git-send-email-shengjiu.wang@nxp.com


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 292709b9

 ]

SRES is self-cleared bit, but REG_MICFIL_CTRL1 is defined as
non volatile register, it still remain in regmap cache after set,
then every update of REG_MICFIL_CTRL1, software reset happens.
to avoid this, clear it explicitly.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-1-git-send-email-shengjiu.wang@nxp.com


Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 02e1a114

 upstream.

area_cache_get() is used to distribute cache->area and set cache->id,
 and if cache->id is not 0 and cache->area->kref refcount is 0, it will
 release the cache->area by nfp_cpp_area_release(). area_cache_get()
 set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
 is already set but the refcount is not increased as expected. At this
 time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and
 nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device
 equipped with specified configuration.

 BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
  Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

 Call Trace:
  <TASK>
 nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

 Allocated by task 1:
 nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
 nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
 nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
 nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
 nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

 Freed by task 1:
 kfree (mm/slub.c:4562)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
 nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
 nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)

Signed-off-by: Jialiang Wang <wangjialiang0806@163.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 10bc8e4a upstream.

Commit 868f9f2f ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().

To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.

Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.

Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.

This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.

Fixes: 868f9f2f

 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[backport comments for v5.15: - sb_write_started() is missing - assert was dropped ]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45be2ad0 upstream.

Recently, ld.lld moved from '--undefined-version' to
'--no-undefined-version' as the default, which breaks building the vDSO
when CONFIG_X86_SGX is not set:

  ld.lld: error: version script assignment of 'LINUX_2.6' to symbol '__vdso_sgx_enter_enclave' failed: symbol not defined

__vdso_sgx_enter_enclave is only included in the vDSO when
CONFIG_X86_SGX is set. Only export it if it will be present in the final
object, which clears up the error.

Fixes: 84664369

 ("x86/vdso: Implement a vDSO for Intel SGX enclave call")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1756
Link: https://lore.kernel.org/r/20221109000306.1407357-1-nathan@kernel.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VLI have a firmware update for the VL805 which resolves the incorrect
frame time calculation in the hub's TT. Limit applying the quirk to
known-bad firmwares.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>

Add a new overlay that disables the EMMC2 controller on BCM2711.
This can be useful on a Compute Module 4 if the onboard EMMC2
storage is unreliable and the system can be booted by other
means e.g Network / USB.

Signed-off-by: Tim Gover <tim.gover@raspberrypi.com>

CM4S follows the pattern of CM1&3 for routing camera
GPIO control, but didn't have the overrides defined to
allow enabling and configuring the camera regulator
GPIOs. Add them.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

To make it easier for custom routing of camera control GPIOs,
add the camX_reg_gpio parameter to CM4 DT as well.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

The standard instructions for wiring up cameras on CM1&3
assign GPIOs for both the shutdown and LED pins on the
camera connectors.
The assignment in DT matched the LED wiring, not the shutdown
line, so didn't control the camera power correctly.

Update the base DT accordingly.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>