The MPTCP protocol access the listener subflow in a lockless
manner in a couple of places (poll, diag). That works only if
the msk itself leaves the listener status only after that the
subflow itself has been closed/disconnected. Otherwise we risk
deadlock in diag, as reported by Christoph.

Address the issue ensuring that the first subflow (the listener
one) is always disconnected before updating the msk socket status.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/407
Fixes: b29fcfb5

 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Thanks to the previous patch -- "mptcp: consolidate fallback and non
fallback state machine" -- we can finally drop the "temporary hack"
used to detect rx eof.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

An orphaned msk releases the used resources via the worker,
when the latter first see the msk in CLOSED status.

If the msk status transitions to TCP_CLOSE in the release callback
invoked by the worker's final release_sock(), such instance of the
workqueue will not take any action.

Additionally the MPTCP code prevents scheduling the worker once the
socket reaches the CLOSE status: such msk resources will be leaked.

The only code path that can trigger the above scenario is the
__mptcp_check_send_data_fin() in fallback mode.

Address the issue removing the special handling of fallback socket
in __mptcp_check_send_data_fin(), consolidating the state machine
for fallback and non fallback socket.

Since non-fallback sockets do not send and do not receive data_fin,
the mptcp code can update the msk internal status to match the next
step in the SM every time data fin (ack) should be generated or
received.

As a consequence we can remove a bunch of checks for fallback from
the fastpath.

Fixes: 6e628cd3

 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

At passive MPJ time, if the msk socket lock is held by the user,
the new subflow is appended to the msk->join_list under the msk
data lock.

In mptcp_release_cb()/__mptcp_flush_join_list(), the subflows in
that list are moved from the join_list into the conn_list under the
msk socket lock.

Append and removal could race, possibly corrupting such list.
Address the issue splicing the join list into a temporary one while
still under the msk data lock.

Found by code inspection, the race itself should be almost impossible
to trigger in practice.

Fixes: 3e501490

 ("mptcp: cleanup MPJ subflow list handling")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Christoph reported a divide by zero bug in mptcp_recvmsg():

divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018
Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60
RSP: 0018:ffffc90000a07a18 EFLAGS: 00010246
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000040000
RDX: 0000000000000000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: 000000000000ffd7 R08: ffffffff820cf297 R09: 0000000000000001
R10: 0000000000000000 R11: ffffffff8103d1a0 R12: 0000000000003f00
R13: 0000000000300000 R14: ffff888101cf3540 R15: 0000000000180000
FS:  00007f9af4c09640(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b33824000 CR3: 000000012f241001 CR4: 0000000000170ee0
Call Trace:
 <TASK>
 __tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611
 mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034
 inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861
 ____sys_recvmsg+0x269/0x2b0 net/socket.c:1019
 ___sys_recvmsg+0xe6/0x260 net/socket.c:2764
 do_recvmmsg+0x1a5/0x470 net/socket.c:2858
 __do_sys_recvmmsg net/socket.c:2937 [inline]
 __se_sys_recvmmsg net/socket.c:2953 [inline]
 __x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f9af58fc6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007f9af4c08cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f9af58fc6a9
RDX: 0000000000000001 RSI: 0000000020000140 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000f00 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40
 </TASK>

mptcp_recvmsg is allowed to release the msk socket lock when
blocking, and before re-acquiring it another thread could have
switched the sock to TCP_LISTEN status - with a prior
connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss.

Address the issue preventing the disconnect if some other process is
concurrently performing a blocking syscall on the same socket, alike
commit 4faeee0c ("tcp: deny tcp_disconnect() when threads are waiting").

Fixes: a6b118fe

 ("mptcp: add receive buffer auto-tuning")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/404


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the mptcp code has assumes that disconnect() can fail only
at mptcp_sendmsg_fastopen() time - to avoid a deadlock scenario - and
don't even bother returning an error code.

Soon mptcp_disconnect() will handle more error conditions: let's track
them explicitly.

As a bonus, explicitly annotate TCP-level disconnect as not failing:
the mptcp code never blocks for event on the subflows.

Fixes: 7d803344

 ("mptcp: fix deadlock in fastopen error path")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-06-21

We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).

The main changes are:

1) Fix a verifier id tracking issue with scalars upon spill,
   from Maxim Mikityanskiy.

2) Fix NULL dereference if an exception is generated while a BPF
   subprogram is running, from Krister Johansen.

3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
   from Florent Revest.

4) Fix expected_attach_type enforcement for kprobe_multi link,
   from Jiri Olsa.

5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
   from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Force kprobe multi expected_attach_type for kprobe_multi link
  bpf/btf: Accept function names that contain dots
  selftests/bpf: add a test for subprogram extables
  bpf: ensure main program has an extable
  bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
  selftests/bpf: Add test cases to assert proper ID tracking on spill
  bpf: Fix verifier id tracking of scalars on spill
====================

Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We currently allow to create perf link for program with
expected_attach_type == BPF_TRACE_KPROBE_MULTI.

This will cause crash when we call helpers like get_attach_cookie or
get_func_ip in such program, because it will call the kprobe_multi's
version (current->bpf_ctx context setup) of those helpers while it
expects perf_link's current->bpf_ctx context setup.

Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type
only for programs attaching through kprobe_multi link.

Fixes: ca74823c

 ("bpf: Add cookie support to programs attached with kprobe multi link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org

When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.

In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.

Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:

  - > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
    but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue

  - <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
    which case GNU as will be used

Fixes: 1dc92851

 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org

This reverts commit da9ef50f.

This fixes a regression in which the link would come up, but no
communication was possible.

The reverted commit was also removing a comment about
DP83867_PHYCR_FORCE_LINK_GOOD, this is not added back in this commits
since it seems that this is unrelated to the original code change.

Closes: https://lore.kernel.org/all/ZGuDJos8D7N0J6Z2@francesco-nb.int.toradex.com/
Fixes: da9ef50f

 ("net: phy: dp83867: perform soft reset and retain established link")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20230619154435.355485-1-francesco@dolcini.it


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

PHY address and device address are passed in the wrong order.

Cc: stable@vger.kernel.org
Fixes: 4e4aafcd

 ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230619094948.84452-1-jiawenwu@trustnetic.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for AX1690i and AX1690s devices with
PCIE id 0x7AF0.

Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230619150233.461290-2-johannes@sipsolutions.net


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.

The NIC in question identifies itself as follows:

[    8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[    8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1

02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)

Fixes: ca34fe38

 ("be2net: fix wrong usage of adapter->generation")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Link: https://lore.kernel.org/r/20230616164549.2863037-1-ross.lagerwall@citrix.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipsec-2023-06-20

Arınç ÜNAL says:

====================
net: dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling

This patch series fixes all non-theoretical issues regarding multiple CPU
ports and the handling of LLDP frames and BPDUs.

I am adding me as a maintainer, I've got some code improvements on the way.
I will keep an eye on this driver and the patches submitted for it in the
future.

Arınç

v6:
- Change a small portion of the comment in the diff on "net: dsa: mt7530:
  set all CPU ports in MT7531_CPU_PMAP" with Russell's suggestion.
- Change the patch log of "net: dsa: mt7530: fix trapping frames on
  non-MT7621 SoC MT7530 switch" with Vladimir's suggestion.
- Group the code for trapping frames into a common function and call that.
- Add Vladimir and Russell's reviewed-by tags to where they're given.

v5:
- Change the comment in the diff on the first patch with Russell's words.
- Change the patch log of the first patch to state that the patch is just
  preparatory work for change "net: dsa: introduce
  preferred_default_local_cpu_port and use on MT7530" and not a fix to an
  existing problem on the code base.
- Remove the "net: dsa: mt7530: fix trapping frames with multiple CPU ports
  on MT7530" patch. It fixes a theoretical issue, therefore it is net-next
  material.
- Remove unnecessary information from the patch logs. Remove the enum
  renaming change.
- Strengthen the point of the "net: dsa: introduce
  preferred_default_local_cpu_port and use on MT7530" patch.

v4: Make the patch logs and my comments in the code easier to understand.
v3: Fix the from header on the patches. Write a cover letter.
v2: Add patches to fix the handling of LLDP frames and BPDUs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Add me as a maintainer of the MediaTek MT7530 DSA subdriver.

List maintainers in alphabetical order by first name.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.

The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.

The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
  prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
  sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port

Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.

Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.

Without preferring port 6:

[ ID][Role] Interval           Transfer     Bitrate         Retr
[  5][TX-C]   0.00-20.00  sec   374 MBytes   157 Mbits/sec  734    sender
[  5][TX-C]   0.00-20.00  sec   373 MBytes   156 Mbits/sec    receiver
[  7][RX-C]   0.00-20.00  sec  1.81 GBytes   778 Mbits/sec    0    sender
[  7][RX-C]   0.00-20.00  sec  1.81 GBytes   777 Mbits/sec    receiver

With preferring port 6:

[ ID][Role] Interval           Transfer     Bitrate         Retr
[  5][TX-C]   0.00-20.00  sec  1.99 GBytes   856 Mbits/sec  273    sender
[  5][TX-C]   0.00-20.00  sec  1.99 GBytes   855 Mbits/sec    receiver
[  7][RX-C]   0.00-20.00  sec  1.72 GBytes   737 Mbits/sec   15    sender
[  7][RX-C]   0.00-20.00  sec  1.71 GBytes   736 Mbits/sec    receiver

Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.

As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.

Fixes: c288575f

 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

LLDP frames are link-local frames, therefore they must be trapped to the
CPU port. Currently, the MT753X switches treat LLDP frames as regular
multicast frames, therefore flooding them to user ports. To fix this, set
LLDP frames to be trapped to the CPU port(s).

Fixes: b8f126a8

 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BPDUs are link-local frames, therefore they must be trapped to the CPU
port. Currently, the MT7530 switch treats BPDUs as regular multicast
frames, therefore flooding them to user ports. To fix this, set BPDUs to be
trapped to the CPU port. Group this on mt7530_setup() and
mt7531_setup_common() into mt753x_trap_frames() and call that.

Fixes: b8f126a8

 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All MT7530 switch IP variants share the MT7530_MFC register, but the
current driver only writes it for the switch variant that is integrated in
the MT7621 SoC. Modify the code to include all MT7530 derivatives.

Fixes: b8f126a8

 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU
frames (further restricted by PCR_MATRIX).

Currently the driver sets the first CPU port as the single port in this bit
mask, which works fine regardless of whether the device tree defines port
5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's
logic of picking the first CPU port as the CPU port that all user ports are
affine to, by default.

An upcoming change would like to influence DSA's selection of the default
CPU port to no longer be the first one, and in that case, this logic needs
adaptation.

Since there is no observed leakage or duplication of frames if all CPU
ports are defined in this bit mask, simply include them all.

Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Layerscape MACs support 25Gbps network speed with dpmac "CAUI" mode.
Add the mappings between DPMAC_ETH_IF_* and HY_INTERFACE_MODE_*, as well
as the 25000 mac capability.

Tested on SolidRun LX2162a Clearfog, serdes 1 protocol 18.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ieee802154-for-net-2023-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan



Stefan Schmidt says:

====================
An update from ieee802154 for your *net* tree:

Two small fixes and MAINTAINERS update this time.

Azeem Shaikh ensured consistent use of strscpy through the tree and fixed
the usage in our trace.h.

Chen Aotian fixed a potential memory leak in the hwsim simulator for
ieee802154.

Miquel Raynal updated the MAINATINERS file with the new team git tree
locations and patchwork URLs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2023-06-16

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06e

 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>

If the core is left to remove the LEDs via devm_, it is performed too
late, after the PHY driver is removed from the PHY. This results in
dereferencing a NULL pointer when the LED core tries to turn the LED
off before destroying the LED.

Manually unregister the LEDs at a safe point in phy_remove.

Cc: stable@vger.kernel.org
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 01e5b728

 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running workloads heavy unbalanced towards TX (high TX, low RX
traffic), sfc driver can retain the CPU during too long times. Although
in many cases this is not enough to be visible, it can affect
performance and system responsiveness.

A way to reproduce it is to use a debug kernel and run some parallel
netperf TX tests. In some systems, this will lead to this message being
logged:
  kernel:watchdog: BUG: soft lockup - CPU#12 stuck for 22s!

The reason is that sfc driver doesn't account any NAPI budget for the TX
completion events work. With high-TX/low-RX traffic, this makes that the
CPU is held for long time for NAPI poll.

Documentations says "drivers can process completions for any number of Tx
packets but should only process up to budget number of Rx packets".
However, many drivers do limit the amount of TX completions that they
process in a single NAPI poll.

In the same way, this patch adds a limit for the TX work in sfc. With
the patch applied, the watchdog warning never appears.

Tested with netperf in different combinations: single process / parallel
processes, TCP / UDP and different sizes of UDP messages. Repeated the
tests before and after the patch, without any noticeable difference in
network or CPU performance.

Test hardware:
Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (4 cores, 2 threads/core)
Solarflare Communications XtremeScale X2522-25G Network Adapter

Fixes: 5227eccc ("sfc: remove tx and MCDI handling from NAPI budget consideration")
Fixes: d19a5372

 ("sfc_ef100: TX path for EF100 NICs")
Reported-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230615084929.10506-1-ihuguet@redhat.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since the return values
from the helper macros are ignored by the callers.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89



Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230613003326.3538391-1-azeemshaikh38@gmail.com


Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

ASO query can be scheduled in atomic context as such it can't use usleep.
Use udelay as recommended in Documentation/timers/timers-howto.rst.

Fixes: 76e463f6

 ("net/mlx5e: Overcome slow response for first IPsec ASO WQE")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

XFRM state which is changed to be XFRM_STATE_EXPIRED doesn't really
need to hold lock while modifying flow steering rules to drop traffic.

That state can be deleted only and as such mlx5e_ipsec_handle_tx_limit()
work will be canceled anyway and won't run in parallel.

Fixes: b2f7b01d

 ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Previously during mlx5e_ipsec_handle_event the driver tried to execute
an operation that could sleep, while holding a spinlock, which caused
the kernel panic mentioned below.

Move the function call that can sleep outside of the spinlock context.

 Call Trace:
 <TASK>
 dump_stack_lvl+0x49/0x6c
 __schedule_bug.cold+0x42/0x4e
 schedule_debug.constprop.0+0xe0/0x118
 __schedule+0x59/0x58a
 ? __mod_timer+0x2a1/0x3ef
 schedule+0x5e/0xd4
 schedule_timeout+0x99/0x164
 ? __pfx_process_timeout+0x10/0x10
 __wait_for_common+0x90/0x1da
 ? __pfx_schedule_timeout+0x10/0x10
 wait_func+0x34/0x142 [mlx5_core]
 mlx5_cmd_invoke+0x1f3/0x313 [mlx5_core]
 cmd_exec+0x1fe/0x325 [mlx5_core]
 mlx5_cmd_do+0x22/0x50 [mlx5_core]
 mlx5_cmd_exec+0x1c/0x40 [mlx5_core]
 mlx5_modify_ipsec_obj+0xb2/0x17f [mlx5_core]
 mlx5e_ipsec_update_esn_state+0x69/0xf0 [mlx5_core]
 ? wake_affine+0x62/0x1f8
 mlx5e_ipsec_handle_event+0xb1/0xc0 [mlx5_core]
 process_one_work+0x1e2/0x3e6
 ? __pfx_worker_thread+0x10/0x10
 worker_thread+0x54/0x3ad
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xda/0x101
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x29/0x37
 </TASK>
 BUG: workqueue leaked lock or atomic: kworker/u256:4/0x7fffffff/189754#012     last function: mlx5e_ipsec_handle_event [mlx5_core]
 CPU: 66 PID: 189754 Comm: kworker/u256:4 Kdump: loaded Tainted: G        W          6.2.0-2596.20230309201517_5.el8uek.rc1.x86_64 #2
 Hardware name: Oracle Corporation ORACLE SERVER X9-2/ASMMBX9-2, BIOS 61070300 08/17/2022
 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_event [mlx5_core]
 Call Trace:
 <TASK>
 dump_stack_lvl+0x49/0x6c
 process_one_work.cold+0x2b/0x3c
 ? __pfx_worker_thread+0x10/0x10
 worker_thread+0x54/0x3ad
 ? __pfx_worker_thread+0x10/0x10
 kthread+0xda/0x101
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x29/0x37
 </TASK>
 BUG: scheduling while atomic: kworker/u256:4/189754/0x00000000

Fixes: cee137a6

 ("net/mlx5e: Handle ESN update events")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

XFRM core provides two callbacks to release resources, one is .xdo_dev_policy_delete()
and another is .xdo_dev_policy_free(). This separation allows delayed release so
"ip xfrm policy free" commands won't starve. Unfortunately, mlx5 command interface
can't run in .xdo_dev_policy_free() callbacks as the latter runs in ATOMIC context.

 BUG: scheduling while atomic: swapper/7/0/0x00000100
 Modules linked in: act_mirred act_tunnel_key cls_flower sch_ingress vxlan mlx5_vdpa vringh vhost_iotlb vdpa rpcrdma rdma_ucm ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse
 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.3.0+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <IRQ>
  dump_stack_lvl+0x33/0x50
  __schedule_bug+0x4e/0x60
  __schedule+0x5d5/0x780
  ? __mod_timer+0x286/0x3d0
  schedule+0x50/0x90
  schedule_timeout+0x7c/0xf0
  ? __bpf_trace_tick_stop+0x10/0x10
  __wait_for_common+0x88/0x190
  ? usleep_range_state+0x90/0x90
  cmd_exec+0x42e/0xb40 [mlx5_core]
  mlx5_cmd_do+0x1e/0x40 [mlx5_core]
  mlx5_cmd_exec+0x18/0x30 [mlx5_core]
  mlx5_cmd_delete_fte+0xa8/0xd0 [mlx5_core]
  del_hw_fte+0x60/0x120 [mlx5_core]
  mlx5_del_flow_rules+0xec/0x270 [mlx5_core]
  ? default_send_IPI_single_phys+0x26/0x30
  mlx5e_accel_ipsec_fs_del_pol+0x1a/0x60 [mlx5_core]
  mlx5e_xfrm_free_policy+0x15/0x20 [mlx5_core]
  xfrm_policy_destroy+0x5a/0xb0
  xfrm4_dst_destroy+0x7b/0x100
  dst_destroy+0x37/0x120
  rcu_core+0x2d6/0x540
  __do_softirq+0xcd/0x273
  irq_exit_rcu+0x82/0xb0
  sysvec_apic_timer_interrupt+0x72/0x90
  </IRQ>
  <TASK>
  asm_sysvec_apic_timer_interrupt+0x16/0x20
 RIP: 0010:default_idle+0x13/0x20
 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 7a 4d ee 00 85 c0 7e 07 0f 00 2d 2f 98 2e 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 40 b4 02 00
 RSP: 0018:ffff888100843ee0 EFLAGS: 00000242
 RAX: 0000000000000001 RBX: ffff888100812b00 RCX: 4000000000000000
 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000002d2ec
 RBP: 0000000000000007 R08: 00000021daeded59 R09: 0000000000000001
 R10: 0000000000000000 R11: 000000000000000f R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  default_idle_call+0x30/0xb0
  do_idle+0x1c1/0x1d0
  cpu_startup_entry+0x19/0x20
  start_secondary+0xfe/0x120
  secondary_startup_64_no_verify+0xf3/0xfb
  </TASK>
 bad: scheduling from the idle thread!

Fixes: a5b8ca94

 ("net/mlx5e: Add XFRM policy offload logic")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.

On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.

To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.

[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W          6.4.0-rc4+ #10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282
[ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000
[ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023
[ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260
[ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000
[ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600
[ 4497.504804] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 4497.505302] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0
[ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158]  <TASK>
[ 4497.507299]  ? free_irq+0x295/0x340
[ 4497.507522]  ? __warn+0x7c/0x130
[ 4497.507740]  ? free_irq+0x295/0x340
[ 4497.507963]  ? report_bug+0x171/0x1a0
[ 4497.508197]  ? handle_bug+0x3c/0x70
[ 4497.508417]  ? exc_invalid_op+0x17/0x70
[ 4497.508662]  ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926]  ? free_irq+0x295/0x340
[ 4497.509146]  mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421]  mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714]  mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984]  shutdown+0x7b/0x100
[ 4497.510184]  pci_device_shutdown+0x30/0x60
[ 4497.510440]  device_shutdown+0x14d/0x240
[ 4497.510698]  kernel_power_off+0x30/0x70
[ 4497.510938]  process_one_work+0x1e6/0x3e0
[ 4497.511183]  worker_thread+0x49/0x3b0
[ 4497.511407]  ? __pfx_worker_thread+0x10/0x10
[ 4497.511679]  kthread+0xe0/0x110
[ 4497.511879]  ? __pfx_kthread+0x10/0x10
[ 4497.512114]  ret_from_fork+0x29/0x50
[ 4497.512342]  </TASK>

Fixes: 9c2d0801

 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>

When TUNNEL_L3_TO_L2 decap action was created, a pointer to a local
variable was passed as its HW action data, resulting in attempt to
free invalid address:

  BUG: KASAN: invalid-free in mlx5dr_action_destroy+0x318/0x410 [mlx5_core]

Fixes: 4781df92

 ("net/mlx5: DR, Move STEv0 modify header logic")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In some cases, steering might need to use SW-created action in
FW table, which results in wrong packet reformat being used:

  mlx5_core 0000:81:00.1: mlx5_cmd_check:756:(pid 1154):
      SET_FLOW_TABLE_ENTRY(0×936) op_mod(0×0) failed,
      status bad resource(0×5), syndrome (0xf2ff71)

This patch adds support for usage of SW-created packet reformat (encap)
actions in FW tables, and adds clear error flow for attempt to use
SW-created modify header on FW tables.

Fixes: 6a48faee

 ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit removes special handling of CT action. But it
removes too much. Pre ct/ct_nat tables and some other resources
are not destroyed due to the cited commit.

Fix it by adding it back.

Fixes: 08fe94ec

 ("net/mlx5e: TC, Remove special handling of CT action")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commits add hardware miss support to tc action. But if
the rules can't be offloaded, the pointers are null and system
will panic when accessing them.

Fix it by checking null pointer.

Fixes: 08fe94ec ("net/mlx5e: TC, Remove special handling of CT action")
Fixes: 67027828

 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When a PCI device has just one msix vector available, we want to share
this vector between async and completion events. Current code fails to
do that assuming it will always have at least one dedicated vector for
completion events. Fix this by detecting when the pool contains just a
single vector.

Fixes: 3354822c

 ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>