- Dec 21, 2023
-
-
Christian Marangi authored
Replace msleep(1) with usleep_range as suggested by timers-howto guide. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231217232508.26470-1-ansuelsmth@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Christian Marangi authored
Remove extra space after cast as reported by checkpatch to keep code clean. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231217232739.27065-1-ansuelsmth@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
- Dec 20, 2023
-
-
David S. Miller authored
Victor Nogueira says: ==================== net: sched: Make tc-related drop reason more flexible for remaining qdiscs This patch builds on Daniel's patch[1] to add initial support of tc drop reason. The main goal is to distinguish between policy and error drops for the remainder of the egress qdiscs (other than clsact). The drop reason is set by cls_api and act_api in the tc skb cb in case any error occurred in the data path. Also add new skb drop reasons that are idiosyncratic to TC. [1] https://lore.kernel.org/all/20231009092655.22025-1-daniel@iogearbox.net Changes in V5: - Drop "EXT_" from cookie error's drop reason name in doc Changes in V4: - Condense all the cookie drop reasons into one Changes in V3: - Removed duplicate assignment - Rename function tc_skb_cb_drop_reason to tcf_get_drop_reason - Move zone field upwards in struct tc_skb_cb to move hole to the end of the struct Changes in V2: - Dropped RFC tag - Removed check for drop reason being overwritten by filter in cls_api.c - Simplified logic and removed function tcf_init_drop_reason ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Victor Nogueira authored
Continue expanding Daniel's patch by adding new skb drop reasons that are idiosyncratic to TC. More specifically: - SKB_DROP_REASON_TC_COOKIE_ERROR: An error occurred whilst processing a tc ext cookie. - SKB_DROP_REASON_TC_CHAIN_NOTFOUND: tc chain lookup failed. - SKB_DROP_REASON_TC_RECLASSIFY_LOOP: tc exceeded max reclassify loop iterations Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Victor Nogueira authored
Incrementing on Daniel's patch[1], make tc-related drop reason more flexible for remaining qdiscs - that is, all qdiscs aside from clsact. In essence, the drop reason will be set by cls_api and act_api in case any error occurred in the data path. With that, we can give the user more detailed information so that they can distinguish between a policy drop or an error drop. [1] https://lore.kernel.org/all/20231009092655.22025-1-daniel@iogearbox.net Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Victor Nogueira authored
Move drop_reason from struct tcf_result to skb cb - more specifically to struct tc_skb_cb. With that, we'll be able to also set the drop reason for the remaining qdiscs (aside from clsact) that do not have access to tcf_result when time comes to set the skb drop reason. Signed-off-by:
Victor Nogueira <victor@mojatatu.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
This adds support for the LED's on most chip versions. Excluded are the old non-PCIe versions and RTL8125. RTL8125 has a different LED register layout, support for it will follow later. LED's can be controlled from userspace using the netdev LED trigger. Tested on RTL8168h. Note: The driver can't know which LED's are actually physically wired. Therefore not every LED device may represent a physically available LED. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== Add MDB bulk deletion support This patchset adds MDB bulk deletion support, allowing user space to request the deletion of matching entries instead of dumping the entire MDB and issuing a separate deletion request for each matching entry. Support is added in both the bridge and VXLAN drivers in a similar fashion to the existing FDB bulk deletion support. The parameters according to which bulk deletion can be performed are similar to the FDB ones, namely: Destination port, VLAN ID, state (e.g., "permanent"), routing protocol, source / destination VNI, destination IP and UDP port. Flushing based on flags (e.g., "offload", "fast_leave", "added_by_star_ex", "blocked") is not currently supported, but can be added in the future, if a use case arises. Patch #1 adds a new uAPI attribute to allow specifying the state mask according to which bulk deletion will be performed, if any. Patch #2 adds a new policy according to which bulk deletion requests (with 'NLM_F_BULK' flag set) will be parsed. Patches #3-#4 add a new NDO for MDB bulk deletion and invoke it from the rtnetlink code when a bulk deletion request is made. Patches #5-#6 implement the MDB bulk deletion NDO in the bridge and VXLAN drivers, respectively. Patch #7 allows user space to issue MDB bulk deletion requests by no longer rejecting the 'NLM_F_BULK' flag when it is set in 'RTM_DELMDB' requests. Patches #8-#9 add selftests for both drivers, for both good and bad flows. iproute2 changes can be found here [1]. https://github.com/idosch/iproute2/tree/submit/mdb_flush_v1 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Add test cases to verify the behavior of the MDB bulk deletion functionality in the VXLAN driver. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Add test cases to verify the behavior of the MDB bulk deletion functionality in the bridge driver. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Now that both the common code as well as individual drivers support MDB bulk deletion, allow user space to make such requests. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Implement MDB bulk deletion support in the VXLAN driver, allowing MDB entries to be deleted in bulk according to provided parameters. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Implement MDB bulk deletion support in the bridge driver, allowing MDB entries to be deleted in bulk according to provided parameters. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Invoke the new MDB bulk deletion device operation when the 'NLM_F_BULK' flag is set in the netlink message header. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Add MDB net device operation that will be invoked by rtnetlink code in response to received 'RTM_DELMDB' messages with the 'NLM_F_BULK' flag set. Subsequent patches will implement the operation in the bridge and VXLAN drivers. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
For MDB bulk delete we will need to validate 'MDBA_SET_ENTRY' differently compared to regular delete. Specifically, allow the ifindex to be zero (in case not filtering on bridge port) and force the address to be zero as bulk delete based on address is not supported. Do that by introducing a new policy and choosing the correct policy based on the presence of the 'NLM_F_BULK' flag in the netlink message header. Use nlmsg_parse() for strict validation. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Currently, the 'state' field in 'struct br_port_msg' can be set to 1 if the MDB entry is permanent or 0 if it is temporary. Additional states might be added in the future. In a similar fashion to 'NDA_NDM_STATE_MASK', add an MDB state mask uAPI attribute that will allow the upcoming bulk deletion API to bulk delete MDB entries with a certain state or any state. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wang Jinchao authored
Maintain Consistent Formatting: Insert Space after #include Suggested-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Wang Jinchao <wangjinchao@xfusion.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2023-12-19 Hi David, hi Jakub, hi Paolo, hi Eric, The following pull-request contains BPF updates for your *net-next* tree. We've added 2 non-merge commits during the last 1 day(s) which contain a total of 40 files changed, 642 insertions(+), 2926 deletions(-). The main changes are: 1) Revert all of BPF token-related patches for now as per list discussion [0], from Andrii Nakryiko. [0] https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com 2) Fix a syzbot-reported use-after-free read in nla_find() triggered from bpf_skb_get_nlattr_nest() helper, from Jakub Kicinski. bpf-next-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: Revert BPF token-related functionality bpf: Use nla_ok() instead of checking nla_len directly ==================== Link: https://lore.kernel.org/r/20231219170359.11035-1-daniel@iogearbox.net Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Andrii Nakryiko authored
This patch includes the following revert (one conflicting BPF FS patch and three token patch sets, represented by merge commits): - revert 0f5d5454 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'"; - revert 750e7857 "bpf: Support uid and gid when mounting bpffs"; - revert 73376328 "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'"; - revert c35919dc "Merge branch 'bpf-token-and-bpf-fs-based-delegation'". Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com Signed-off-by:
Andrii Nakryiko <andrii@kernel.org>
-
- Dec 19, 2023
-
-
Paolo Abeni authored
Jiri Pirko says: ==================== devlink: introduce notifications filtering From: Jiri Pirko <jiri@nvidia.com> Currently the user listening on a socket for devlink notifications gets always all messages for all existing devlink instances and objects, even if he is interested only in one of those. That may cause unnecessary overhead on setups with thousands of instances present. User is currently able to narrow down the devlink objects replies to dump commands by specifying select attributes. Allow similar approach for notifications providing user a new notify-filter-set command to select attributes with values the notification message has to match. In that case, it is delivered to the socket. Note that the filtering is done per-socket, so multiple users may specify different selection of attributes with values. This patchset initially introduces support for following attributes: DEVLINK_ATTR_BUS_NAME DEVLINK_ATTR_DEV_NAME DEVLINK_ATTR_PORT_INDEX Patches #1 - #4 are preparations in devlink code, patch #3 is an optimization done on the way. Patches #5 - #7 are preparations in netlink and generic netlink code. Patch #8 is the main one in this set implementing of the notify-filter-set command and the actual per-socket filtering. Patch #9 extends the infrastructure allowing to filter according to a port index. Example: $ devlink mon port pci/0000:08:00.0/32768 [port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,del] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable ==================== Link: https://lore.kernel.org/r/20231216123001.1293639-1-jiri@resnulli.us Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Expose the previously introduced notification multicast messages filtering infrastructure and allow the user to select messages using port index. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Currently the user listening on a socket for devlink notifications gets always all messages for all existing instances, even if he is interested only in one of those. That may cause unnecessary overhead on setups with thousands of instances present. User is currently able to narrow down the devlink objects replies to dump commands by specifying select attributes. Allow similar approach for notifications. Introduce a new devlink NOTIFY_FILTER_SET which the user passes the select attributes. Store these per-socket and use them for filtering messages during multicast send. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Currently it is possible for netlink kernel user to pass custom filter function to broadcast send function netlink_broadcast_filtered(). However, this is not exposed to multicast send and to generic netlink users. Extend the api and introduce a netlink helper nlmsg_multicast_filtered() and a generic netlink helper genlmsg_multicast_netns_filtered() to allow generic netlink families to specify filter function while sending multicast messages. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Make the code using filter function a bit nicer by consolidating the filter function arguments using typedef. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Introduce an xarray for Generic netlink family to store per-socket private. Initialize this xarray only if family uses per-socket privs. Introduce genl_sk_priv_get() to get the socket priv pointer for a family and initialize it in case it does not exist. Introduce __genl_sk_priv_get() to obtain socket priv pointer for a family under RCU read lock. Allow family to specify the priv size, init() and destroy() callbacks. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Introduce a helper devlink_nl_notify_send() so each object notification function does not have to call genlmsg_multicast_netns() with the same arguments. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Introduce devlink_nl_notify_need() helper and using it to check at the beginning of notification functions to avoid overhead of composing notification messages in case nobody listens. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Introduce __devl_is_registered() which does not assert on devlink instance lock and use it in notifications which may be called without devlink instance lock held. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jiri Pirko authored
Instead of checking the xarray mark directly using xa_get_mark() helper use devl_is_registered() helper which wraps it up. Note that there are couple more users of xa_get_mark() left which are going to be handled by the next patch. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
nla_len may also be too short to be sane, in which case after recent changes nla_len() will return a wrapped value. Fixes: 172db56d ("netlink: Return unsigned value for nla_len()") Reported-by:
<syzbot+f43a23b6e622797c7a28@syzkaller.appspotmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/bpf/20231218231904.260440-1-kuba@kernel.org
-
Paolo Abeni authored
Shinas Rasheed says: ==================== add PF-VF mailbox support This patchset aims to add PF-VF mailbox support, its related version support, and relevant control net support for immediate functionalities such as firmware notifications to VF. Changes: V6: - Fixed 1/4 patch to apply to top of net-next merged with net fixes V5: https://lore.kernel.org/all/20231214164536.2670006-1-srasheed@marvell.com/ - Refactored patches to cut out redundant changes in 1/4 patch. V4: https://lore.kernel.org/all/20231213035816.2656851-1-srasheed@marvell.com/ - Included tag [1/4] in subject of first patch of series which was lost in V3 V3: https://lore.kernel.org/all/20231211063355.2630028-1-srasheed@marvell.com/ - Corrected error cleanup logic for PF-VF mbox setup - Removed double inclusion of types.h header file in octep_pfvf_mbox.c V2: https://lore.kernel.org/all/20231209081450.2613561-1-srasheed@marvell.com/ - Removed unused variable in PATCH 1/4 V1: https://lore.kernel.org/all/20231208070352.2606192-1-srasheed@marvell.com/ ==================== Link: https://lore.kernel.org/r/20231215181425.2681426-1-srasheed@marvell.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Shinas Rasheed authored
Notifications from firmware to vf has to pass through PF control mbox and via PF-VF mailboxes. The notifications have to be parsed out from the control mbox and passed to the PF-VF mailbox in order to reach the corresponding VF. Version compatibility should also be checked before messages are passed to the mailboxes. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Shinas Rasheed authored
Inquire firmware on supported offloads, as well as convey offloads enabled dynamically to firmware for the VFs. Implement control net API to support the same. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Shinas Rasheed authored
Add PF-VF mailbox initial version support Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Shinas Rasheed authored
Implement mailbox communication between PF and VFs. PF-VF mailbox is used for all control commands from VF to PF and asynchronous notification messages from PF to VF. Signed-off-by:
Shinas Rasheed <srasheed@marvell.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The second features pull request for v6.8. A bigger one this time with changes both to stack and drivers. We have a new Wifi band RFI (WBRF) mitigation feature for which we pulled an immutable branch shared with other subsystems. And, as always, other new features and bug fixes all over. Major changes: cfg80211/mac80211 * AMD ACPI based Wifi band RFI (WBRF) mitigation feature * Basic Service Set (BSS) usage reporting * TID to link mapping support * mac80211 hardware flag to disallow puncturing iwlwifi * new debugfs file fw_dbg_clear mt76 * NVMEM EEPROM improvements * mt7996 Extremely High Throughpu (EHT) improvements * mt7996 Wireless Ethernet Dispatcher (WED) support * mt7996 36-bit DMA support ath12k * support one MSI vector * WCN7850: support AP mode * tag 'wireless-next-2023-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: mt76: mt7996: Use DECLARE_FLEX_ARRAY() and fix -Warray-bounds warnings wifi: ath11k: workaround too long expansion sparse warnings Revert "wifi: ath12k: use ATH12K_PCI_IRQ_DP_OFFSET for DP IRQ" wifi: rt2x00: remove useless code in rt2x00queue_create_tx_descriptor() wifi: rtw89: only reset BB/RF for existing WiFi 6 chips while starting up wifi: rtw89: add DBCC H2C to notify firmware the status wifi: rtw89: mac: add suffix _ax to MAC functions wifi: rtw89: mac: add flags to check if CMAC and DMAC are enabled wifi: rtw89: 8922a: add power on/off functions wifi: rtw89: add XTAL SI for WiFi 7 chips wifi: rtw89: phy: print out RFK log with formatted string wifi: rtw89: parse and print out RFK log from C2H events wifi: rtw89: add C2H event handlers of RFK log and report wifi: rtw89: load RFK log format string from firmware file wifi: rtw89: fw: add version field to BB MCU firmware element wifi: rtw89: fw: load TX power track tables from fw_element wifi: mwifiex: configure BSSID consistently when starting AP wifi: mwifiex: add extra delay for firmware ready wifi: mac80211: sta_info.c: fix sentence grammar wifi: mac80211: rx.c: fix sentence grammar ... ==================== Link: https://lore.kernel.org/r/20231218163900.C031DC433C9@smtp.kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Andrii Nakryiko authored
It is safe to always start with imprecise SCALAR_VALUE register. Previously __mark_reg_const_zero() relied on caller to reset precise mark, but it's very error prone and we already missed it in a few places. So instead make __mark_reg_const_zero() reset precision always, as it's a safe default for SCALAR_VALUE. Explanation is basically the same as for why we are resetting (or rather not setting) precision in current state. If necessary, precision propagation will set it to precise correctly. As such, also remove a big comment about forward precision propagation in mark_reg_stack_read() and avoid unnecessarily setting precision to true after reading from STACK_ZERO stack. Again, precision propagation will correctly handle this, if that SCALAR_VALUE register will ever be needed to be precise. Reported-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yonghong.song@linux.dev> Acked-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
-
Jakub Kicinski authored
Donald Hunter says: ==================== tools/net/ynl: Add 'sub-message' support to ynl This patchset adds a 'sub-message' attribute type to the netlink-raw schema and implements it in ynl. This provides support for kind-specific options attributes as used in rt_link and tc raw netlink families. A description of the new 'sub-message' attribute type and the corresponding sub-message definitions is provided in patch 3. The patchset includes updates to the rt_link spec and a new tc spec that make use of the new 'sub-message' attribute type. As mentioned in patch 4, encode support is not yet implemented in ynl and support for sub-message selectors at a different nest level from the key attribute is not yet supported. I plan to work on these in follow-up patches. Patches 1 is code cleanup in ynl Patches 2-4 add sub-message support to the schema and ynl with documentation updates. Patch 5 adds binary and pad support to structs in netlink-raw. Patches 6-8 contain specs that use the sub-message attribute type. Patches 9-13 update ynl-gen-rst and its make target ==================== Link: https://lore.kernel.org/r/20231215093720.18774-1-donald.hunter@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-