- Jul 19, 2023
-
-
Yu Kuai authored
commit cbe7cff4 upstream. If config is disabled, call blk_trace_remove() directly will trigger build warning, hence use inline function instead, prepare to fix blktrace debugfs entries leakage. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230610022003.2557284-2-yukuai1@huaweicloud.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Marangi authored
commit cee4bd16 upstream. Dev can be renamed also while up for supported device. We currently wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME event. Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and correctly set the NETDEV_LED_MODE_LINKUP bit. Fixes: 5f820ed5 ("leds: trigger: netdev: fix handling on interface rename") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit f8ef1233 upstream. The DT version of this board has a custom file with the gpio device. However, it does nothing because the d2net_init() has no caller or prototype: arch/arm/mach-orion5x/board-d2net.c:101:13: error: no previous prototype for 'd2net_init' Call it from the board-dt file as intended. Fixes: 94b0bd36 ("ARM: orion5x: convert d2net to Device Tree") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230516153109.514251-10-arnd@kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit edcbdd57 upstream. After renaming NAND controller node name from "qpic-nand" to "nand-controller", the board DTS/DTSI also have to be updated: Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property Cc: <stable@vger.kernel.org> Fixes: 9e1e00f1 ("ARM: dts: qcom: Fix node name for NAND controller node") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420072811.36947-1-krzysztof.kozlowski@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Walleij authored
commit a0f19091 upstream. commit 04715461abf7 altered the node names in a DTSI file used by qcom-apq8060-dragonboard.dts breaking the board. Align the node names in the DTS file and the board boots again. Cc: stable@vger.kernel.org Fixes: 85055a1e ("ARM: dts: qcom-msm8660: align RPM regulators node name with bindings") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230414135747.34994-1-linus.walleij@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krzysztof Kozlowski authored
commit f050e56d upstream. The driver's probe() first registers regulators in a loop and then in a second loop passes them as irq data to the interrupt handlers. However the function to get the regulator for given name tps65219_get_rdev_by_name() was a no-op due to argument passed by value, not pointer, thus the second loop assigned always same value - from previous loop. The interrupts, when fired, where executed with wrong data. Compiler also noticed it: drivers/regulator/tps65219-regulator.c: In function ‘tps65219_get_rdev_by_name’: drivers/regulator/tps65219-regulator.c:292:60: error: parameter ‘dev’ set but not used [-Werror=unused-but-set-parameter] Fixes: c12ac5fc ("regulator: drivers: Add TI TPS65219 PMIC regulators support") Cc: <stable@vger.kernel.org Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/r/20230507144656.192800-1-krzysztof.kozlowski@linaro.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ricardo Ribalda Delgado authored
commit a46d3701 upstream. If the second component fails to initialize, cleanup the first on. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Cc: stable@kernel.org Fixes: f1b5bf07 ("ASoC: mt2701/mt8173: replace platform to component") Signed-off-by:
Ricardo Ribalda Delgado <ribalda@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-1-432aa99ce24d@chromium.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ricardo Ribalda Delgado authored
commit f9c058d1 upstream. After reordering the irq probe, the error path was not properly done. Lets fix it. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Cc: stable@kernel.org Fixes: 4cbb264d ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready") Signed-off-by:
Ricardo Ribalda Delgado <ribalda@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-2-432aa99ce24d@chromium.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 40b0a749 upstream. At __btrfs_cow_block(), instead of doing a BUG_ON() in case we fail to record a tree mod log root insertion operation, do a transaction abort instead. There's really no need for the BUG_ON(), we can properly release all resources in this context and turn the filesystem to RO mode and in an error state instead. CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit ede600e4 upstream. At split_node(), if we fail to log the tree mod log copy operation, we return without unlocking the split extent buffer we just allocated and without decrementing the reference we own on it. Fix this by unlocking it and decrementing the ref count before returning. Fixes: 5de865ee ("Btrfs: fix tree mod logging") CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit d09c5152 upstream. When COWing an extent buffer that is not the root node, we need to log in the tree mod log that we replaced a pointer in the parent node, otherwise a tree mod log user doing a search on the b+tree can return incorrect results (that miss something). We are doing the call to btrfs_tree_mod_log_insert_key() but we totally ignore its return value. So fix this by adding the missing error handling, resulting in a transaction abort and freeing the COWed extent buffer. Fixes: f230475e ("Btrfs: put all block modifications into the tree mod log") CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit b31cb5a6 upstream. When disabling quotas we are deleting the quota root from the list fs_info->dirty_cowonly_roots without taking the lock that protects it, which is struct btrfs_fs_info::trans_lock. This unsynchronized list manipulation may cause chaos if there's another concurrent manipulation of this list, such as when adding a root to it with ctree.c:add_root_to_dirty_list(). This can result in all sorts of weird failures caused by a race, such as the following crash: [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs] [337571.279928] Code: 85 38 06 00 (...) [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206 [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000 [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070 [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600 [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48 [337571.281723] FS: 00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000 [337571.281950] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0 [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [337571.282874] Call Trace: [337571.283101] <TASK> [337571.283327] ? __die_body+0x1b/0x60 [337571.283570] ? die_addr+0x39/0x60 [337571.283796] ? exc_general_protection+0x22e/0x430 [337571.284022] ? asm_exc_general_protection+0x22/0x30 [337571.284251] ? commit_cowonly_roots+0x11f/0x250 [btrfs] [337571.284531] btrfs_commit_transaction+0x42e/0xf90 [btrfs] [337571.284803] ? _raw_spin_unlock+0x15/0x30 [337571.285031] ? release_extent_buffer+0x103/0x130 [btrfs] [337571.285305] reset_balance_state+0x152/0x1b0 [btrfs] [337571.285578] btrfs_balance+0xa50/0x11e0 [btrfs] [337571.285864] ? __kmem_cache_alloc_node+0x14a/0x410 [337571.286086] btrfs_ioctl+0x249a/0x3320 [btrfs] [337571.286358] ? mod_objcg_state+0xd2/0x360 [337571.286577] ? refill_obj_stock+0xb0/0x160 [337571.286798] ? seq_release+0x25/0x30 [337571.287016] ? __rseq_handle_notify_resume+0x3ba/0x4b0 [337571.287235] ? percpu_counter_add_batch+0x2e/0xa0 [337571.287455] ? __x64_sys_ioctl+0x88/0xc0 [337571.287675] __x64_sys_ioctl+0x88/0xc0 [337571.287901] do_syscall_64+0x38/0x90 [337571.288126] entry_SYSCALL_64_after_hwframe+0x72/0xdc [337571.288352] RIP: 0033:0x7f478aaffe9b So fix this by locking struct btrfs_fs_info::trans_lock before deleting the quota root from that list. Fixes: bed92eae ("Btrfs: qgroup implementation and prototypes") CC: stable@vger.kernel.org # 4.14+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naohiro Aota authored
commit 7e271809 upstream. The reclaim process can temporarily fail. For example, if the space is getting tight, it fails to make the block group read-only. If there are no further writes on that block group, the block group will never get back to the reclaim list, and the BG never gets reclaimed. In a certain workload, we can leave many such block groups never reclaimed. So, let's get it back to the list and give it a chance to be reclaimed. Fixes: 18bb8bbf ("btrfs: zoned: automatically reclaim zones") CC: stable@vger.kernel.org # 5.15+ Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Sterba authored
commit 1a1b0e72 upstream. The block group tree was not present among the lockdep classes. We could get potentially lockdep warnings but so far none has been seen, also because block-group-tree is a relatively new feature. CC: stable@vger.kernel.org # 6.1+ Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naohiro Aota authored
commit 93463ff7 upstream. When a filesystem is read-only, we cannot reclaim a block group as it cannot rewrite the data. Just bail out in that case. Note that it can drop block groups in this case. As we did sb_start_write(), read-only filesystem means we got a fatal error and forced read-only. There is no chance to reclaim them again. Fixes: 18bb8bbf ("btrfs: zoned: automatically reclaim zones") CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naohiro Aota authored
commit 3ed01616 upstream. The reclaiming process only starts after the filesystem volumes are allocated to a certain level (75% by default). Thus, the list of reclaiming target block groups can build up so huge at the time the reclaim process kicks in. On a test run, there were over 1000 BGs in the reclaim list. As the reclaim involves rewriting the data, it takes really long time to reclaim the BGs. While the reclaim is running, btrfs_delete_unused_bgs() won't proceed because the reclaim side is holding fs_info->reclaim_bgs_lock. As a result, we will have a large number of unused BGs kept in the unused list. On my test run, I got 1057 unused BGs. Since deleting a block group is relatively easy and fast work, we can call btrfs_delete_unused_bgs() while it reclaims BGs, to avoid building up unused BGs. Fixes: 18bb8bbf ("btrfs: zoned: automatically reclaim zones") CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Burkov authored
commit 95c8e349 upstream. The way that tree mod log tracks the ultimate length of the eb, the variable 'n', eventually turns up the correct value, but at intermediate steps during the rewind, n can be inaccurate as a representation of the end of the eb. For example, it doesn't get updated on move rewinds, and it does get updated for add/remove in the middle of the eb. To detect cases with invalid moves, introduce a separate variable called max_slot which tries to track the maximum valid slot in the rewind eb. We can then warn if we do a move whose src range goes beyond the max valid slot. There is a commented caveat that it is possible to have this value be an overestimate due to the challenge of properly handling 'add' operations in the middle of the eb, but in practice it doesn't cause enough of a problem to throw out the max idea in favor of tracking every valid slot. CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Burkov authored
commit 5cead542 upstream. There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1 [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017 [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00 [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246 [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100 [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8 [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000 [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0 [530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000 [530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0 [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [530.928] Call Trace: [530.934] ? btrfs_printk+0x13b/0x18c [530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130 [530.955] btrfs_map_bio+0x75/0x330 [530.963] ? kmem_cache_alloc+0x12a/0x2d0 [530.973] ? btrfs_submit_metadata_bio+0x63/0x100 [530.984] btrfs_submit_metadata_bio+0xa4/0x100 [530.995] submit_extent_page+0x30f/0x360 [531.004] read_extent_buffer_pages+0x49e/0x6d0 [531.015] ? submit_extent_page+0x360/0x360 [531.025] btree_read_extent_buffer_pages+0x5f/0x150 [531.037] read_tree_block+0x37/0x60 [531.046] read_block_for_search+0x18b/0x410 [531.056] btrfs_search_old_slot+0x198/0x2f0 [531.066] resolve_indirect_ref+0xfe/0x6f0 [531.076] ? ulist_alloc+0x31/0x60 [531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0 [531.095] find_parent_nodes+0x720/0x1830 [531.105] ? ulist_alloc+0x10/0x60 [531.113] iterate_extent_inodes+0xea/0x370 [531.123] ? btrfs_previous_extent_item+0x8f/0x110 [531.134] ? btrfs_search_path_in_tree+0x240/0x240 [531.146] iterate_inodes_from_logical+0x98/0xd0 [531.157] ? btrfs_search_path_in_tree+0x240/0x240 [531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180 [531.179] btrfs_ioctl+0xe2/0x2eb0 This occurs when logical inode resolution takes a tree mod log sequence number, and then while backref walking hits a rewind on a busy node which has the following sequence of tree mod log operations (numbers filled in from a specific example, but they are somewhat arbitrary) REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 When this sequence gets applied via btrfs_tree_mod_log_rewind, it allocates a fresh rewind eb, and first inserts the correct key info for the 533 elements, then overwrites the first 456 of them, then decrements the count by 456 via the add ops, then rewinds the move by doing a memmove from 456:988->0:532. We have never written anything past 532, so that memmove writes garbage into the 0:532 range. In practice, this results in a lot of fully 0 keys. The rewind then puts valid keys into slots 0:455 with the last removes, but 456:532 are still invalid. When search_old_slot uses this eb, if it uses one of those invalid slots, it can then read the extent buffer and issue a bio for offset 0 which ultimately panics looking up extent mappings. This bad tree mod log sequence gets generated when the node balancing code happens to do a balance_node_right followed by a push_node_left while logging in the tree mod log. Illustrated for ebs L and R (left and right): L R start: [XXX|YYY|...] [ZZZ|...|...] balance_node_right: [XXX|YYY|...] [...|ZZZ|...] move Z to make room for Y [XXX|...|...] [YYY|ZZZ|...] copy Y from L to R push_node_left: [XXX|YYY|...] [...|ZZZ|...] copy Y from R to L [XXX|YYY|...] [ZZZ|...|...] move Z into emptied space (NOT LOGGED!) This is because balance_node_right logs a move, but push_node_left explicitly doesn't. That is because logging the move would remove the overwritten src < dst range in the right eb, which was already logged when we called btrfs_tree_mod_log_eb_copy. The correct sequence would include a move from 456:988 to 0:532 after remove 0:455 and before removing 0:532. Reversing that sequence would entail creating keys for 0:532, then moving those keys out to 456:988, then creating more keys for 0:455. i.e., REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 MOVE src slot 456 -> dst slot 0 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 Fix this to log the move but avoid the double remove by putting all the logging logic in btrfs_tree_mod_log_eb_copy which has enough information to detect these cases and properly log moves, removes, and adds. Leave btrfs_tree_mod_log_insert_move to handle insert_ptr and delete_ptr's tree mod logging. (Un)fortunately, this is quite difficult to reproduce, and I was only able to reproduce it by adding sleeps in btrfs_search_old_slot that would encourage more log rewinding during ino_to_logical ioctls. I was able to hit the warning in the previous patch in the series without the fix quite quickly, but not after this patch. CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Hellwig authored
commit f18cc978 upstream. dirty_metadata_bytes is decremented in both places that clear the dirty bit in a buffer, but only incremented in btrfs_mark_buffer_dirty, which means that a buffer that is redirtied using btrfs_redirty_list_add won't be added to dirty_metadata_bytes, but it will be subtracted when written out, leading an inconsistency in the counter. Move the dirty_metadata_bytes from btrfs_mark_buffer_dirty into set_extent_buffer_dirty to also account for the redirty case, and remove the now unused set_extent_buffer_dirty return value. Fixes: d3575156 ("btrfs: zoned: redirty released extent buffers") CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matt Corallo authored
commit 160fe8f6 upstream. Callers of `btrfs_reduce_alloc_profile` expect it to return exactly one allocation profile flag, and failing to do so may ultimately result in a WARN_ON and remount-ro when allocating new blocks, like the below transaction abort on 6.1. `btrfs_reduce_alloc_profile` has two ways of determining the profile, first it checks if a conversion balance is currently running and uses the profile we're converting to. If no balance is currently running, it returns the max-redundancy profile which at least one block in the selected block group has. This works by simply checking each known allocation profile bit in redundancy order. However, `btrfs_reduce_alloc_profile` has not been updated as new flags have been added - first with the `DUP` profile and later with the RAID1C34 profiles. Because of the way it checks, if we have blocks with different profiles and at least one is known, that profile will be selected. However, if none are known we may return a flag set with multiple allocation profiles set. This is currently only possible when a balance from one of the three unhandled profiles to another of the unhandled profiles is canceled after allocating at least one block using the new profile. In that case, a transaction abort like the below will occur and the filesystem will need to be mounted with -o skip_balance to get it mounted rw again (but the balance cannot be resumed without a similar abort). [770.648] ------------[ cut here ]------------ [770.648] BTRFS: Transaction aborted (error -22) [770.648] WARNING: CPU: 43 PID: 1159593 at fs/btrfs/extent-tree.c:4122 find_free_extent+0x1d94/0x1e00 [btrfs] [770.648] CPU: 43 PID: 1159593 Comm: btrfs Tainted: G W 6.1.0-0.deb11.7-powerpc64le #1 Debian 6.1.20-2~bpo11+1a~test [770.648] Hardware name: T2P9D01 REV 1.00 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV [770.648] NIP: c00800000f6784fc LR: c00800000f6784f8 CTR: c000000000d746c0 [770.648] REGS: c000200089afe9a0 TRAP: 0700 Tainted: G W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test) [770.648] MSR: 9000000002029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28848282 XER: 20040000 [770.648] CFAR: c000000000135110 IRQMASK: 0 GPR00: c00800000f6784f8 c000200089afec40 c00800000f7ea800 0000000000000026 GPR04: 00000001004820c2 c000200089afea00 c000200089afe9f8 0000000000000027 GPR08: c000200ffbfe7f98 c000000002127f90 ffffffffffffffd8 0000000026d6a6e8 GPR12: 0000000028848282 c000200fff7f3800 5deadbeef0000122 c00000002269d000 GPR16: c0002008c7797c40 c000200089afef17 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000001 c000200008bc5a98 0000000000000001 GPR24: 0000000000000000 c0000003c73088d0 c000200089afef17 c000000016d3a800 GPR28: c0000003c7308800 c00000002269d000 ffffffffffffffea 0000000000000001 [770.648] NIP [c00800000f6784fc] find_free_extent+0x1d94/0x1e00 [btrfs] [770.648] LR [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] [770.648] Call Trace: [770.648] [c000200089afec40] [c00800000f6784f8] find_free_extent+0x1d90/0x1e00 [btrfs] (unreliable) [770.648] [c000200089afed30] [c00800000f681398] btrfs_reserve_extent+0x1a0/0x2f0 [btrfs] [770.648] [c000200089afeea0] [c00800000f681bf0] btrfs_alloc_tree_block+0x108/0x670 [btrfs] [770.648] [c000200089afeff0] [c00800000f66bd68] __btrfs_cow_block+0x170/0x850 [btrfs] [770.648] [c000200089aff100] [c00800000f66c58c] btrfs_cow_block+0x144/0x288 [btrfs] [770.648] [c000200089aff1b0] [c00800000f67113c] btrfs_search_slot+0x6b4/0xcb0 [btrfs] [770.648] [c000200089aff2a0] [c00800000f679f60] lookup_inline_extent_backref+0x128/0x7c0 [btrfs] [770.648] [c000200089aff3b0] [c00800000f67b338] lookup_extent_backref+0x70/0x190 [btrfs] [770.648] [c000200089aff470] [c00800000f67b54c] __btrfs_free_extent+0xf4/0x1490 [btrfs] [770.648] [c000200089aff5a0] [c00800000f67d770] __btrfs_run_delayed_refs+0x328/0x1530 [btrfs] [770.648] [c000200089aff740] [c00800000f67ea2c] btrfs_run_delayed_refs+0xb4/0x3e0 [btrfs] [770.648] [c000200089aff800] [c00800000f699aa4] btrfs_commit_transaction+0x8c/0x12b0 [btrfs] [770.648] [c000200089aff8f0] [c00800000f6dc628] reset_balance_state+0x1c0/0x290 [btrfs] [770.648] [c000200089aff9a0] [c00800000f6e2f7c] btrfs_balance+0x1164/0x1500 [btrfs] [770.648] [c000200089affb40] [c00800000f6f8e4c] btrfs_ioctl+0x2b54/0x3100 [btrfs] [770.648] [c000200089affc80] [c00000000053be14] sys_ioctl+0x794/0x1310 [770.648] [c000200089affd70] [c00000000002af98] system_call_exception+0x138/0x250 [770.648] [c000200089affe10] [c00000000000c654] system_call_common+0xf4/0x258 [770.648] --- interrupt: c00 at 0x7fff94126800 [770.648] NIP: 00007fff94126800 LR: 0000000107e0b594 CTR: 0000000000000000 [770.648] REGS: c000200089affe80 TRAP: 0c00 Tainted: G W (6.1.0-0.deb11.7-powerpc64le Debian 6.1.20-2~bpo11+1a~test) [770.648] MSR: 900000000000d033 <SF,HV,EE,PR,ME,IR,DR,RI,LE> CR: 24002848 XER: 00000000 [770.648] IRQMASK: 0 GPR00: 0000000000000036 00007fffc9439da0 00007fff94217100 0000000000000003 GPR04: 00000000c4009420 00007fffc9439ee8 0000000000000000 0000000000000000 GPR08: 00000000803c7416 0000000000000000 0000000000000000 0000000000000000 GPR12: 0000000000000000 00007fff9467d120 0000000107e64c9c 0000000107e64d0a GPR16: 0000000107e64d06 0000000107e64cf1 0000000107e64cc4 0000000107e64c73 GPR20: 0000000107e64c31 0000000107e64bf1 0000000107e64be7 0000000000000000 GPR24: 0000000000000000 00007fffc9439ee0 0000000000000003 0000000000000001 GPR28: 00007fffc943f713 0000000000000000 00007fffc9439ee8 0000000000000000 [770.648] NIP [00007fff94126800] 0x7fff94126800 [770.648] LR [0000000107e0b594] 0x107e0b594 [770.648] --- interrupt: c00 [770.648] Instruction dump: [770.648] 3b00ffe4 e8898828 481175f5 60000000 4bfff4fc 3be00000 4bfff570 3d220000 [770.648] 7fc4f378 e8698830 4811cd95 e8410018 <0fe00000> f9c10060 f9e10068 fa010070 [770.648] ---[ end trace 0000000000000000 ]--- [770.648] BTRFS: error (device dm-2: state A) in find_free_extent_update_loop:4122: errno=-22 unknown [770.648] BTRFS info (device dm-2: state EA): forced readonly [770.648] BTRFS: error (device dm-2: state EA) in __btrfs_free_extent:3070: errno=-22 unknown [770.648] BTRFS error (device dm-2: state EA): failed to run delayed ref for logical 17838685708288 num_bytes 24576 type 184 action 2 ref_mod 1: -22 [770.648] BTRFS: error (device dm-2: state EA) in btrfs_run_delayed_refs:2144: errno=-22 unknown [770.648] BTRFS: error (device dm-2: state EA) in reset_balance_state:3599: errno=-22 unknown Fixes: 47e6f742 ("btrfs: add support for 3-copy replication (raid1c3)") Fixes: 8d6fac00 ("btrfs: add support for 4-copy replication (raid1c4)") CC: stable@vger.kernel.org # 5.10+ Signed-off-by:
Matt Corallo <blnxfsl@bluematt.me> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Abhijeet Rastogi authored
commit 04292c69 upstream. Current range [8, 20] is set purely due to historical reasons because at the time, ~1M (2^20) was considered sufficient. With this change, 27 is the upper limit for 64-bit, 20 otherwise. Previous change regarding this limit is here. Link: https://lore.kernel.org/all/86eabeb9dd62aebf1e2533926fdd13fed48bab1f.1631289960.git.aclaudi@redhat.com/T/#u Signed-off-by:
Abhijeet Rastogi <abhijeet.1989@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Allen Pais <apais@linux.microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit a7fbfd44 upstream. power_supply_is_system_supplied() checks whether any power supplies are present that aren't batteries to decide whether the system is running on DC or AC. Downstream drivers use this to make performance decisions. Navi dGPUs include an UCSI function that has been exported since commit 17631e8c ("i2c: designware: Add driver support for AMD NAVI GPU"). This UCSI function registers a power supply since commit 992a60ed ("usb: typec: ucsi: register with power_supply class") but this is not a system power supply. As the power supply for a dGPU is only for powering devices connected to dGPU, create a device property to indicate that the UCSI endpoint is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`. Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/ Reviewed-by:
Evan Quan <evan.quan@amd.com> Tested-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 28eceeda upstream. When a directory is moved to a different directory, some filesystems (udf, ext4, ocfs2, f2fs, and likely gfs2, reiserfs, and others) need to update their pointer to the parent and this must not race with other operations on the directory. Lock the directories when they are moved. Although not all filesystems need this locking, we perform it in vfs_rename() because getting the lock ordering right is really difficult and we don't want to expose these locking details to filesystems. CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Message-Id: <20230601105830.13168-5-jack@suse.cz> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit f23ce757 upstream. Currently the locking order of inode locks for directories that are not in ancestor relationship is not defined because all operations that needed to lock two directories like this were serialized by sb->s_vfs_rename_mutex. However some filesystems need to lock two subdirectories for RENAME_EXCHANGE operations and for this we need the locking order established even for two tree-unrelated directories. Provide a helper function lock_two_inodes() that establishes lock ordering for any two inodes and use it in lock_two_directories(). CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Message-Id: <20230601105830.13168-4-jack@suse.cz> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 7517ce5d upstream. This reverts commit f950fd05 . The locking is going to be provided by vfs_rename() in the following patches. CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Message-Id: <20230601105830.13168-2-jack@suse.cz> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit cde3c9d7 upstream. This reverts commit d9477215 . The locking is going to be provided by VFS. CC: Jaegeuk Kim <jaegeuk@kernel.org> CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Message-Id: <20230601105830.13168-3-jack@suse.cz> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 3658840c upstream. Remove locking of moved directory in ext4_rename2(). We will take care of it in VFS instead. This effectively reverts commit 0813299c ("ext4: Fix possible corruption when moving a directory") and followup fixes. CC: Ted Tso <tytso@mit.edu> CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Message-Id: <20230601105830.13168-1-jack@suse.cz> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Weißschuh authored
commit 62176420 upstream. As each option string fragment is always prepended with a comma it would happen that the whole string always starts with a comma. This could be interpreted by filesystem drivers as an empty option and may produce errors. For example the NTFS driver from ntfs.ko behaves like this and fails when mounted via the new API. Link: https://github.com/util-linux/util-linux/issues/2298 Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Fixes: 3e1aeb00 ("vfs: Implement a filesystem superblock creation/configuration context") Cc: stable@vger.kernel.org Message-Id: <20230607-fs-empty-option-v1-1-20c8dbf4671b@weissschuh.net> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabian Frederick authored
commit 1168f095 upstream. Use kcalloc() for allocation/flush of 128 pointers table to reduce stack usage. Function now returns -ENOMEM or 0 on success. stackusage Before: ./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208 dynamic,bounded After: ./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192 dynamic,bounded Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled Tested with an MTD mount point and some user set/getfattr. Many current target on OpenWRT also suffer from a compilation warning (that become an error with CONFIG_WERROR) with the following output: fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem': fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] 887 | } | ^ Using dynamic allocation fix this compilation warning. Fixes: c9f700f8 ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion") Reported-by:
Tim Gardner <tim.gardner@canonical.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Ron Economos <re@w6rz.net> Reported-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Message-Id: <20230506045612.16616-1-ansuelsmth@gmail.com> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Brauner authored
commit 2d8ae8c4 upstream. We've aligned setgid behavior over multiple kernel releases. The details can be found in commit cf619f89 ("Merge tag 'fs.ovl.setgid.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping") and commit 426b4ca2 ("Merge tag 'fs.setgid.v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux"). Consistent setgid stripping behavior is now encapsulated in the setattr_should_drop_sgid() helper which is used by all filesystems that strip setgid bits outside of vfs proper. Usually ATTR_KILL_SGID is raised in e.g., chown_common() and is subject to the setattr_should_drop_sgid() check to determine whether the setgid bit can be retained. Since nfsd is raising ATTR_KILL_SGID unconditionally it will cause notify_change() to strip it even if the caller had the necessary privileges to retain it. Ensure that nfsd only raises ATR_KILL_SGID if the caller lacks the necessary privileges to retain the setgid bit. Without this patch the setgid stripping tests in LTP will fail: > As you can see, the problem is S_ISGID (0002000) was dropped on a > non-group-executable file while chown was invoked by super-user, while [...] > fchown02.c:66: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700 [...] > chown02.c:57: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700 With this patch all tests pass. Reported-by:
Sherry Yang <sherry.yang@oracle.com> Signed-off-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roberto Sassu authored
commit 36ce9d76 upstream. As the ramfs-based tmpfs uses ramfs_init_fs_context() for the init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb() to free it and avoid a memory leak. Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com Fixes: c3b1b1cb ("ramfs: add support for "mode=" mount option") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ryan Roberts authored
commit c11d34fa upstream. It is racy to non-atomically read a pte, then clear the young bit, then write it back as this could discard dirty information. Further, it is bad practice to directly set a pte entry within a table. Instead clearing young must go through the arch-provided helper, ptep_test_and_clear_young() to ensure it is modified atomically and to give the arch code visibility and allow it to check (and potentially modify) the operation. Link: https://lkml.kernel.org/r/20230602092949.545577-3-ryan.roberts@arm.com Fixes: 3f49584b ("mm/damon: implement primitives for the virtual memory address spaces"). Signed-off-by:
Ryan Roberts <ryan.roberts@arm.com> Reviewed-by:
Zi Yan <ziy@nvidia.com> Reviewed-by:
SeongJae Park <sj@kernel.org> Reviewed-by:
Mike Rapoport (IBM) <rppt@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit e910c8e3 upstream. Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning for the autofs_dev_ioctl structure: In function 'check_name', inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9, inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8: fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread] 33 | if (!strchr(name, '/')) | ^~~~~~~~~~~~~~~~~ In file included from include/linux/auto_dev-ioctl.h:10, from fs/autofs/autofs_i.h:10, from fs/autofs/dev-ioctl.c:14: include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl': include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0 112 | char path[0]; | ^~~~ This is easily fixed by changing the gnu 0-length array into a c99 flexible array. Since this is a uapi structure, we have to be careful about possible regressions but this one should be fine as they are equivalent here. While it would break building with ancient gcc versions that predate c99, it helps building with --std=c99 and -Wpedantic builds in user space, as well as non-gnu compilers. This means we probably also want it fixed in stable kernels. Cc: stable@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230523081944.581710-1-arnd@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tianjia Zhang authored
commit 9df6a487 upstream. When integrity_inode_get() is querying and inserting the cache, there is a conditional race in the concurrent environment. The race condition is the result of not properly implementing "double-checked locking". In this case, it first checks to see if the iint cache record exists before taking the lock, but doesn't check again after taking the integrity_iint_lock. Fixes: bf2276d1 ("ima: allocating iint improvements") Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit a5a319ec upstream. When HEADER_ARCH was introduced, the MRPROPER_FILES (then MRPROPER_DIRS) list wasn't adjusted, leaving SUBARCH as part of the path argument. This resulted in the "mrproper" target not cleaning up arch/x86/... when SUBARCH was specified. Since HOST_DIR is arch/$(HEADER_ARCH), use it instead to get the correct path. Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Azeem Shaikh <azeemshaikh38@gmail.com> Cc: linux-um@lists.infradead.org Fixes: 7bbe7204 ("um: merge Makefile-{i386,x86_64}") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230606222442.never.807-kees@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Siddh Raman Pant authored
commit 943211c8 upstream. NULL the dangling pipe reference while clearing watch_queue. If not done, a reference to a freed pipe remains in the watch_queue, as this function is called before freeing a pipe in free_pipe_info() (see line 834 of fs/pipe.c). The sole use of wqueue->defunct is for checking if the watch queue has been cleared, but wqueue->pipe is also NULLed while clearing. Thus, wqueue->defunct is superfluous, as wqueue->pipe can be checked for NULL. Hence, the former can be removed. Tested with keyutils testsuite. Cc: stable@vger.kernel.org # 6.1 Signed-off-by:
Siddh Raman Pant <code@siddh.me> Acked-by:
David Howells <dhowells@redhat.com> Message-Id: <20230605143616.640517-1-code@siddh.me> Signed-off-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheng Wang authored
commit 80fca8a1 upstream. In some specific situations, the return value of __bch_btree_node_alloc may be NULL. This may lead to a potential NULL pointer dereference in caller function like a calling chain : btree_split->bch_btree_node_alloc->__bch_btree_node_alloc. Fix it by initializing the return value in __bch_btree_node_alloc. Fixes: cafe5635 ("bcache: A block layer cache") Cc: stable@vger.kernel.org Signed-off-by:
Zheng Wang <zyytlz.wz@163.com> Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20230615121223.22502-6-colyli@suse.de Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheng Wang authored
commit 028ddcac upstream. Due to the previous fix of __bch_btree_node_alloc, the return value will never be a NULL pointer. So IS_ERR is enough to handle the failure situation. Fix it by replacing IS_ERR_OR_NULL check by an IS_ERR check. Fixes: cafe5635 ("bcache: A block layer cache") Cc: stable@vger.kernel.org Signed-off-by:
Zheng Wang <zyytlz.wz@163.com> Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20230615121223.22502-5-colyli@suse.de Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mingzhe Zou authored
commit f0854489 upstream. We get a kernel crash about "list_add corruption. next->prev should be prev (ffff9c801bc01210), but was ffff9c77b688237c. (next=ffffae586d8afe68)." crash> struct list_head 0xffff9c801bc01210 struct list_head { next = 0xffffae586d8afe68, prev = 0xffffae586d8afe68 } crash> struct list_head 0xffff9c77b688237c struct list_head { next = 0x0, prev = 0x0 } crash> struct list_head 0xffffae586d8afe68 struct list_head struct: invalid kernel virtual address: ffffae586d8afe68 type: "gdb_readmem_callback" Cannot access memory at address 0xffffae586d8afe68 [230469.019492] Call Trace: [230469.032041] prepare_to_wait+0x8a/0xb0 [230469.044363] ? bch_btree_keys_free+0x6c/0xc0 [escache] [230469.056533] mca_cannibalize_lock+0x72/0x90 [escache] [230469.068788] mca_alloc+0x2ae/0x450 [escache] [230469.080790] bch_btree_node_get+0x136/0x2d0 [escache] [230469.092681] bch_btree_check_thread+0x1e1/0x260 [escache] [230469.104382] ? finish_wait+0x80/0x80 [230469.115884] ? bch_btree_check_recurse+0x1a0/0x1a0 [escache] [230469.127259] kthread+0x112/0x130 [230469.138448] ? kthread_flush_work_fn+0x10/0x10 [230469.149477] ret_from_fork+0x35/0x40 bch_btree_check_thread() and bch_dirty_init_thread() may call mca_cannibalize() to cannibalize other cached btree nodes. Only one thread can do it at a time, so the op of other threads will be added to the btree_cache_wait list. We must call finish_wait() to remove op from btree_cache_wait before free it's memory address. Otherwise, the list will be damaged. Also should call bch_cannibalize_unlock() to release the btree_cache_alloc_lock and wake_up other waiters. Fixes: 8e710227 ("bcache: make bch_btree_check() to be multithreaded") Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded") Cc: stable@vger.kernel.org Signed-off-by:
Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20230615121223.22502-7-colyli@suse.de Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quan Zhou authored
commit 525c469e upstream. For some cases as below, we may encounter the unpreditable chip stats in driver probe() * The system reboot flow do not work properly, such as kernel oops while rebooting, and then the driver do not go back to default status at this moment. * Similar to the flow above. If the device was enabled in BIOS or UEFI, the system may switch to Linux without driver fully shutdown. To avoid the problem, force push the device back to default in probe() * mt7921e_mcu_fw_pmctrl() : return control privilege to chip side. * mt7921_wfsys_reset() : cleanup chip config before resource init. Error log [59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010 [59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout [59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore [59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout [59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore [59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout [59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore [59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout [59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore [59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout [59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore [59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout [59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore [59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout [59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore [59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout [59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore [59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout [59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout [59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.923845] mt7921e 0000:02:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: 5c14a5f9 ("mt76: mt7921: introduce mt7921e support") Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Juan Martinez <juan.martinez@amd.com> Co-developed-by:
Leon Yen <leon.yen@mediatek.com> Signed-off-by:
Leon Yen <leon.yen@mediatek.com> Signed-off-by:
Quan Zhou <quan.zhou@mediatek.com> Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-