There is a further gate in between the mipidphy reference clock and the
actual ref-clock input to the dsi host, making the clock hirarchy look like
clk_24m --> Gate11[14] --> clk_mipidphy_ref --> Gate21[0] --> clk_dphy_pll

Fix the clock reference so that the whole clock subtree gets enabled when
the dsi host needs it.

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
[amended commit message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This reverts commit 6f2dea1f

.

Without accurate cpu regulators being set for boards this will wreak havoc
when cpufreq-dt begins to set new frequencies without adjusting the core
frequency.

Additionally the rk3368 has an unsolved issue in that it has two separate
cpu clusters with separate clock lines but only one cpu supply regulator
for both clusters, which causes even more problems.

While it seems that originally only one cluster was supposed to be active
at a time (big or little), talking with real users of the hardware
revealed that having all 8 cores accessible at 1.2GHz max is way more
liked than having 4 cores at 1.5GHz max. Such an approach needs changes
to cpufreq and/or opp though to control the two separate clock lines when
setting both clusters to the same frequencies.

In any case, having the OPPs in the dts at this point in time is
undesireable, so remove them again for now.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

When emulating a nested VM-entry from L1 to L2, several control field
validation checks are deferred to the hardware. Should one of these
validation checks fail, vcpu_vmx_run will set the vmx->fail flag. When
this happens, the L2 guest state is not loaded (even in part), and
execution should continue in L1 with the next instruction after the
VMLAUNCH/VMRESUME.

The VMCS12 is not modified (except for the VM-instruction error
field), the VMCS12 MSR save/load lists are not processed, and the CPU
state is not loaded from the VMCS12 host area. Moreover, the vmcs02
exit reason is stale, so it should not be consulted for any reason.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

On an early VMLAUNCH/VMRESUME failure (i.e. one which sets the
VM-instruction error field of the current VMCS), the launch state of
the current VMCS is not set to "launched," and the VM-exit information
fields of the current VMCS (including IDT-vectoring information and
exit reason) are stale.

On a late VMLAUNCH/VMRESUME failure (i.e. one which sets the high bit
of the exit reason field), the launch state of the current VMCS is not
set to "launched," and only two of the VM-exit information fields of
the current VMCS are modified (exit reason and exit
qualification). The remaining VM-exit information fields of the
current VMCS (including IDT-vectoring information, in particular) are
stale.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

After a successful VM-entry, RFLAGS is cleared, with the exception of
bit 1, which is always set. This is handled by load_vmcs12_host_state.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

For example, the following could occur, making us miss a wakeup:

CPU0					CPU1
kvm_vcpu_block				kvm_mips_comparecount_func
					  [L] swait_active(&vcpu->wq)
  [S] prepare_to_swait(&vcpu->wq)
  [L] if (!kvm_vcpu_has_pending_timer(vcpu))
         schedule()                       [S] queue_timer_int(vcpu)

Ensure that the swait_active() check is not hoisted over the interrupt.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Particularly because kvmppc_fast_vcpu_kick_hv() is a callback,
ensure that we properly serialize wq active checks in order to
avoid potentially missing a wakeup due to racing with the waiter
side.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

During code inspection, the following potential race was seen:

CPU0   	    		    	     	CPU1
kvm_async_pf_task_wait			apf_task_wake_one
					  [L] swait_active(&n->wq)
  [S] prepare_to_swait(&n.wq)
  [L] if (!hlist_unhahed(&n.link))
	schedule()			  [S] hlist_del_init(&n->link);

Properly serialize swait_active() checks such that a wakeup is
not missed.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A comment might serve future readers.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The value of the guest_irq argument to vmx_update_pi_irte() is
ultimately coming from a KVM_IRQFD API call. Do not BUG() in
vmx_update_pi_irte() if the value is out-of bounds. (Especially,
since KVM as a whole seems to hang after that.)

Instead, print a message only once if we find that we don't have a
route for a certain IRQ (which can be out-of-bounds or within the
array).

This fixes CVE-2017-1000252.

Fixes: efc64404

 ("KVM: x86: Update IRTE for posted-interrupts")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Mainline crashes as follows when running nios2 images.

On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c8408fa0, node_mem_map c8726000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Unable to handle kernel NULL pointer dereference at virtual address 00000000
ea = c8003cb0, ra = c81cbf40, cause = 15
Kernel panic - not syncing: Oops

Problem is seen because get_cycles() is called before the timer it depends
on is initialized. Returning 0 in that situation fixes the problem.

Fixes: 33d72f38

 ("init/main.c: extract early boot entropy from the ..")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Allow earlycon to be used on the JTAG UART present in the 3c120 GHRD.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>

If L1 does not specify the "use TPR shadow" VM-execution control in
vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store
exiting" VM-execution controls in vmcs02. Failure to do so will give
the L2 VM unrestricted read/write access to the hardware CR8.

This fixes CVE-2017-12154.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This fixes the emulation of the dcbz instruction in the alignment
interrupt handler.  The error was that we were comparing just the
instruction type field of op.type rather than the whole thing,
and therefore the comparison "type != CACHEOP + DCBZ" was always
true.

Fixes: 31bfdb03

 ("powerpc: Use instruction emulation infrastructure to handle alignment faults")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Michal Sojka <sojkam1@fel.cvut.cz>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

qemu-system-x86-8600  [004] d..1  7205.687530: kvm_entry: vcpu 2
qemu-system-x86-8600  [004] ....  7205.687532: kvm_exit: reason EXCEPTION_NMI rip 0xffffffffa921297d info ffffeb2c0e44e018 80000b0e
qemu-system-x86-8600  [004] ....  7205.687532: kvm_page_fault: address ffffeb2c0e44e018 error_code 0
qemu-system-x86-8600  [004] ....  7205.687620: kvm_try_async_get_page: gva = 0xffffeb2c0e44e018, gfn = 0x427e4e
qemu-system-x86-8600  [004] .N..  7205.687628: kvm_async_pf_not_present: token 0x8b002 gva 0xffffeb2c0e44e018
    kworker/4:2-7814  [004] ....  7205.687655: kvm_async_pf_completed: gva 0xffffeb2c0e44e018 address 0x7fcc30c4e000
qemu-system-x86-8600  [004] ....  7205.687703: kvm_async_pf_ready: token 0x8b002 gva 0xffffeb2c0e44e018
qemu-system-x86-8600  [004] d..1  7205.687711: kvm_entry: vcpu 2

After running some memory intensive workload in guest, I catch the kworker
which completes the GUP too quickly, and queues an "Page Ready" #PF exception
after the "Page not Present" exception before the next vmentry as the above
trace which will result in #DF injected to guest.

This patch fixes it by clearing the queue for "Page not Present" if "Page Ready"
occurs before the next vmentry since the GUP has already got the required page
and shadow page table has already been fixed by "Page Ready" handler.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Fixes: 7c90705b

 ("KVM: Inject asynchronous page fault into a PV guest if page is swapped out.")
[Changed indentation and added clearing of injected. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Don't block vCPU if there is pending exception.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

SVM AVIC hardware accelerates guest write to APIC_EOI register
(for edge-trigger interrupt), which means it does not trap to KVM.

So, only enable SVM AVIC only in split irqchip mode.
(e.g. launching qemu w/ option '-machine kernel_irqchip=split').

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Fixes: 44a95dae

 ("KVM: x86: Detect and Initialize AVIC support")
[Removed pr_debug - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

... and __initconst if applicable.

Based on similar work for an older kernel in the Grsecurity patch.

[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

The stacktraces always begin as follows:

  [<c00117b4>] save_stack_trace_tsk+0x0/0x98
  [<c0011870>] save_stack_trace+0x24/0x28
  ...

This is because the stack trace code includes the stack frames for
itself.  This is incorrect behaviour, and also leads to "skip" doing the
wrong thing (which is the number of stack frames to avoid recording.)

Perversely, it does the right thing when passed a non-current thread.
Fix this by ensuring that we have a known constant number of frames
above the main stack trace function, and always skip these.

This was fixed for arch arm by commit 3683f44c ("ARM: stacktrace:
avoid listing stacktrace functions in stacktrace")

Link: http://lkml.kernel.org/r/1504078343-28754-1-git-send-email-guptap@codeaurora.org


Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GFP_TEMPORARY was introduced by commit e12ba74d ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE.  It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation.  As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag.  How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.

The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory.  So
this is rather misleading and hard to evaluate for any benefits.

I have checked some random users and none of them has added the flag
with a specific justification.  I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring.  This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.

I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse.  Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL.  Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.

I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.

This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic.  It
seems to be a heuristic without any measured advantage for most (if not
all) its current users.  The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers.  So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.

[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org

[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
  Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org


Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The intention is to return negative error codes.  "pid" is already
negative but we accidentally negate it again back to positive.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Static checkers would urge us to add curly braces to this code, but
actually the code works correctly.  It just isn't indented right.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

When building a dynamic kernel image use relative symbols with MODVERSIONS.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Debian's gcc defaults to pie. The global Makefile already defines the -fno-pie option.
Link UML dynamic kernel image also with -no-pie to fix the build.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Explicitly export symbols so modpost doesn't complain.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Signed-off-by: James Pack <jpack61108@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Remove old, dead Kconfig option INET_LRO. It is gone since
commit 7bbf3cae

 ("ipv4: Remove inet_lro library").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>

Hard code max size. Taken from
https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=gdb/common/x86-xstate.h



Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Modify struct kvm_x86_ops.arch.apicv_active() to take struct kvm_vcpu
pointer as parameter in preparation to subsequent changes.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Preparing the base code for subsequent changes. This does not change
existing logic.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Clang resolves __builtin_constant_p() to false even if the expression is
constant in the end.  The only purpose of that expression was to
differentiate a case where the following expression couldn't be checked
at compile-time, so we can just remove the check.

Clang handles the following two correctly.  Turn it into BUG_ON if there
are any more problems with this.

Fixes: d6321d49

 ("KVM: x86: generalize guest_cpuid_has_ helpers")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

When user space sets kvm_run->immediate_exit, KVM is supposed to
return quickly. However, when a vCPU is in KVM_MP_STATE_UNINITIALIZED,
the value is not considered and the vCPU blocks.

Fix that oversight.

Fixes: 460df4c1

 ("KVM: race-free exit from KVM_RUN without POSIX signals")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM API says that KVM_RUN will return with -EINTR when a signal is
pending. However, if a vCPU is in KVM_MP_STATE_UNINITIALIZED, then
the return value is unconditionally -EAGAIN.

Copy over some code from vcpu_run(), so that the case of a pending
signal results in the expected return value.

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Fixes: f6511935

 ("KVM: SVM: Add checks for IO instructions")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

The commit

	9dd21e104bc ('KVM: x86: simplify handling of PKRU')

removed all users and providers of that call-back, but
didn't remove it. Remove it now.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Commits:

  7dcf90e9 ("PCI: hv: Use vPCI protocol version 1.2")
  628f54cc

 ("x86/hyper-v: Support extended CPU ranges for TLB flush hypercalls")

added the same definition and they came in through different trees.
Fix the duplication.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devel@linuxdriverproject.org
Link: http://lkml.kernel.org/r/20170911150620.3998-1-vkuznets@redhat.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>

Allocate the hypervisor callback IDT entry early in the boot sequence.

The previous code would allocate the entry as part of registering the handler
when the vmbus driver loaded, and this caused a problem for the IDT cleanup
that Thomas is working on for v4.15.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: apw@canonical.com
Cc: devel@linuxdriverproject.org
Cc: gregkh@linuxfoundation.org
Cc: jasowang@redhat.com
Cc: olaf@aepfle.de
Link: http://lkml.kernel.org/r/20170908231557.2419-1-kys@exchange.microsoft.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>

With removal of lguest some of the paravirt functions are no longer
needed:

	->read_cr4()
	->store_idt()
	->set_pmd_at()
	->set_pud_at()
	->pte_update()

Remove them.

Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akataria@vmware.com
Cc: boris.ostrovsky@oracle.com
Cc: chrisw@sous-sol.org
Cc: jeremy@goop.org
Cc: rusty@rustcorp.com.au
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170904102527.25409-1-jgross@suse.com


Signed-off-by: Ingo Molnar <mingo@kernel.org>

cpu_init() is weird: it's called rather late (after early
identification and after most MMU state is initialized) on the boot
CPU but is called extremely early (before identification) on secondary
CPUs.  It's called just late enough on the boot CPU that its CR4 value
isn't propagated to mmu_cr4_features.

Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two
problems.  First, we'd crash in the trampoline code.  That's
fixable, and I tried that.  It turns out that mmu_cr4_features is
totally ignored by secondary_start_64(), though, so even with the
trampoline code fixed, it wouldn't help.

This means that we don't currently have CR4.PCIDE reliably initialized
before we start playing with cpu_tlbstate.  This is very fragile and
tends to cause boot failures if I make even small changes to the TLB
handling code.

Make it more robust: initialize CR4.PCIDE earlier on the boot CPU
and propagate it to secondary CPUs in start_secondary().

( Yes, this is ugly.  I think we should have improved mmu_cr4_features
  to actually control CR4 during secondary bootup, but that would be
  fairly intrusive at this stage. )

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: 660da7c9

 ("x86/mm: Enable CR4.PCIDE on supported systems")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Jiri reported a resume-from-hibernation failure triggered by PCID.
The root cause appears to be rather odd.  The hibernation asm
restores a CR3 value that comes from the image header.  If the image
kernel has PCID on, it's entirely reasonable for this CR3 value to
have one of the low 12 bits set.  The restore code restores it with
CR4.PCIDE=0, which means that those low 12 bits are accepted by the
CPU but are either ignored or interpreted as a caching mode.  This
is odd, but still works.  We blow up later when the image kernel
restores CR4, though, since changing CR4.PCIDE with CR3[11:0] != 0
is illegal.  Boom!

FWIW, it's entirely unclear to me what's supposed to happen if a PAE
kernel restores a non-PAE image or vice versa.  Ditto for LA57.

Reported-by: Jiri Kosina <jikos@kernel.org>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 660da7c9 ("x86/mm: Enable CR4.PCIDE on supported systems")
Link: http://lkml.kernel.org/r/18ca57090651a6341e97083883f9e814c4f14684.1504847163.git.luto@kernel.org


Signed-off-by: Ingo Molnar <mingo@kernel.org>