- Mar 07, 2015
-
-
Dave Airlie authored
Linux 4.0-rc2 Merging this manually as the i915 change is in it, and intel fixes are on top of this
-
- Mar 05, 2015
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Fixup some fallout of the fallout of atomic dpms, few mdp5 cursor fixes, fix a leak in error path, and some fixes for kexec * 'msm-fixes-4.0' of git://people.freedesktop.org/~robclark/linux: drm/msm: kexec fixes drm/msm/mdp5: fix cursor blending drm/msm/mdp5: fix cursor ROI drm/msm/atomic: Don't leak atomic commit object when commit fails drm/msm/mdp5: Avoid flushing registers when CRTC is disabled drm/msm: update generated headers (add 6th lm.base entry) drm/msm/mdp5: fixup "drm/msm: fix fallout of atomic dpms changes"
-
Rob Clark authored
In kexec environment, we are more likely to encounter irq's already enabled from previous environment. At which point we find that writes to disable/clear pending irq's are slightly less than useless without first enabling clocks. TODO: full blown state read-in so kexec'd kernel can inherit the mode already setup. Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Seems like we just want BLEND_EN and not BLEND_TRANSP_EN (setting the latter results in black pixels in the cursor image treated as transparent). Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
If cursor is set near the edge of the screen, it is not valid to use the new cursor width/height as the ROI dimensions. Split out the ROI calc and use it both cursor_set and cursor_move. Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Laurent Pinchart authored
If the atomic commit fails due to completion wait interruption the atomic commit object is not freed and is thus leaked. Free it. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
When a CRTC is disabled, no CTL is allocated to it (CRTC->ctl == NULL); in that case we should not try to FLUSH registers and do nothing instead. This can happen when we try to move a cursor but the CRTC's CTL (CONTROL) has not been allocated yet (inactive CRTC). It can also happens when we .atomic_check()/.atomic_flush() on a disabled CRTC. A CTL needs to be kept as long as the CRTC is alive. Releasing it after the last VBlank is safer than in .atomic_flush(). Signed-off-by:
Stephane Viau <sviau@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
Some target have up to 6 layer mixers (LM). Let the header file access the last LM's base address. Signed-off-by:
Stephane Viau <sviau@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Stephane Viau authored
Commit 0b776d45 ("drm/msm: fix fallout of atomic dpms changes") has a typo in both mdp5_encoder_helper_funcs and mdp5_crtc_helper_funcs definitions: .dpms entry should be replaced by .disable and .enable Also fixed a typo in mdp5_encoder_enable(). Note that these typos are only present for MDP5. MDP4 is fine. Signed-off-by:
Stephane Viau <sviau@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Radeon fixes for 4.0: - Fix some fallout from the audio rework - Fix a possible oops in the CS ioctl - Fix interlaced modes on DCE8 - Do a posting read in irq_set callbacks to make sure interrupts are properly flushed through the pci bridge * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix interlaced modes on DCE8 drm/radeon: fix DRM_IOCTL_RADEON_CS oops drm/radeon: do a posting read in cik_set_irq drm/radeon: do a posting read in si_set_irq drm/radeon: do a posting read in evergreen_set_irq drm/radeon: do a posting read in r600_set_irq drm/radeon: do a posting read in rs600_set_irq drm/radeon: do a posting read in r100_set_irq radeon/audio: fix DP audio on DCE6 radeon/audio: fix whitespace drm/radeon: adjust audio callback order drm/radeon: properly set dto for dp on DCE4/5 drm/radeon/audio: update EDID derived fields in modeset drm/radeon: don't toggle audio state in modeset drm/radeon/audio: set mute around state setup drm/radeon: assign pin in detect drm/radeon: fix the audio dpms callbacks
-
Alex Deucher authored
We need to store device offsets in 64 bit as the device address space may be larger than the CPU's. Fixes GPU init failures on radeons with 4GB or more of vram on 32 bit kernels. We put vram at the start of the GPU's address space so the gart aperture starts at 4 GB causing all GPU addresses in the gart aperture to get truncated. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89072 [airlied: fix warning on nouveau build] Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: thellstrom@vmware.com Acked-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Thierry Reding authored
The current implementation is limited by the number of addresses that fit into an unsigned long. This causes problems on 32-bit Tegra where unsigned long is 32-bit but drm_mm is used to manage an IOVA space of 4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1 (or 4 GiB - 4 KiB for page granularity). This commit changes the start and size of the range to be an unsigned 64-bit integer, thus allowing much larger ranges to be supported. [airlied: fix i915 warnings and coloring callback] Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> fixupo
-
- Mar 04, 2015
-
-
Alex Deucher authored
Need to double the viewport height. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Tommi Rantala authored
Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Slava Grigorev authored
Split DCE6 and DCE8 programming of DCCG_AUDIO_DTO1 registers to properly enable DP audio for both DCE revisions. Signed-off-by:
Slava Grigorev <slava.grigorev@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Slava Grigorev authored
Use proper tabs. Signed-off-by:
Slava Grigorev <slava.grigorev@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
- Move it out of the UNIPHY case to handle older DCE blocks. - set audio dpms before video dpms Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
If DCPLL or ext PLL is used, use the disp clk. If PPLL is used, use the dp clock. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
We don't necessarily have an EDID at this point when audio detect gets called. Ideally we'd update these fields in detect, but that requires a larger rework of the display detect code. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Should be done only at detect time to avoid spurious state changes on the audio side. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
To avoid possible sound artifacts while setting up audio. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
We need the pin from detect on, it's too late in dpms. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Don't touch the audio enable bits as these are already handled in display detection. Enable the hdmi secondary streams in hdmi enable to match dp. Rename dp dpms callback to be consistent with hdmi. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89327 https://bugzilla.kernel.org/show_bug.cgi?id=93921 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Linus Torvalds authored
-
Daniel Vetter authored
This is a tricky story of the new atomic state handling and the legacy code fighting over each another. The bug at hand is an underrun of the framebuffer reference with subsequent hilarity caused by the load detect code. Which is peculiar since the the exact same code works fine as the implementation of the legacy setcrtc ioctl. Let's look at the ingredients: - Currently our code is a crazy mix of legacy modeset interfaces to set the parameters and half-baked atomic state tracking underneath. While this transition is going we're using the transitional plane helpers to update the atomic side (drm_plane_helper_disable/update and friends), i.e. plane->state->fb. Since the state structure owns the fb those functions take care of that themselves. The legacy state (specifically crtc->primary->fb) is still managed by the old code (and mostly by the drm core), with the fb reference counting done by callers (core drm for the ioctl or the i915 load detect code). The relevant commit is commit ea2c67bb Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) - drm_plane_helper_disable has special code to handle multiple calls in a row - it checks plane->crtc == NULL and bails out. This is to match the proper atomic implementation which needs the crtc to get at the implied locking context atomic updates always need. See commit acf24a39 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 29 15:33:05 2014 +0200 drm/plane-helper: transitional atomic plane helpers - The universal plane code split out the implicit primary plane from the CRTC into it's own full-blown drm_plane object. As part of that the setcrtc ioctl (which updated both the crtc mode and primary plane) learned to set crtc->primary->crtc on modeset to make sure the plane->crtc assignments statate up to date in commit e13161af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) Unfortunately we've forgotten to update the load detect code. Which wasn't a problem since the load detect modeset is temporary and always undone before we drop the locks. - Finally there is a organically grown history (i.e. don't ask) around who sets the legacy plane->fb for the various driver entry points. Originally updating that was the drivers duty, but for almost all places we've moved that (plus updating the refcounts) into the core. Again the exception is the load detect code. Taking all together the following happens: - The load detect code doesn't set crtc->primary->crtc. This is only really an issue on crtcs never before used or when userspace explicitly disabled the primary plane. - The plane helper glue code short-circuits because of that and leaves a non-NULL fb behind in plane->state->fb and plane->fb. The state fb isn't a real problem (it's properly refcounted on its own), it's just the canary. - Load detect code drops the reference for that fb, but doesn't set plane->fb = NULL. This is ok since it's still living in that old world where drivers had to clear the pointer but the core/callers handled the refcounting. - On the next modeset the drm core notices plane->fb and takes care of refcounting it properly by doing another unref. This drops the refcount to zero, leaving state->plane now pointing at freed memory. - intel_plane_duplicate_state still assume it owns a reference to that very state->fb and bad things start to happen. Fix this all by applying the same duct-tape as for the legacy setcrtc ioctl code and set crtc->primary->crtc properly. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Mar 03, 2015
-
-
Dave Airlie authored
This reverts commit 9c58e8db . This doesn't seem to fully fix this, Kbuild who knows. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
Otherwise Kconfig gets confused and somehow ends up creating a 2nd drm submenu. I couldn't find i915 because of this any more at first. Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: linux-kbuild@vger.kernel.or Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Dave Airlie <airlied@gmail.com>
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
imx-drm fixes for mode fixup, dw_hdmi/imx, and parallel-display - A clock fix for too large pixel clocks depending on the DI clock flag simplification patch - Pruning of unsupported modes and a missing end of array element for dw_hdmi-imx - LVDS modeset fix for mode fixup - Fix parallel-display deferred probing if drm_panel is used * tag 'imx-drm-fixes-2015-02-24' of git://git.pengutronix.de/git/pza/linux: DRM: i.MX: parallel display: Support probe deferral for finding DRM panel drm/imx: imx-ldb: enable DI clock in encoder_mode_set drm/imx: dw_hdmi-imx: add end of array element to current control array drm/imx: dw_hdmi-imx: add mode_valid callback prune unsupported modes gpu: ipu-v3: do not divide by zero if the pixel clock is too large
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Two GPIO fixes: - Fix a translation problem in of_get_named_gpiod_flags() - Fix a long standing container_of() mistake in the TPS65912 driver" * tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65912: fix wrong container_of arguments gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node
-
Linus Torvalds authored
Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics: - Several fixes in tmon tool. - Fixes in intel int340x for _ART and _TRT tables. - Add id for Avoton SoC into powerclamp driver. - Fixes in RCAR thermal driver to remove race conditions and fix fail path - Fixes in TI thermal driver: removal of unnecessary code and build fix if !CONFIG_PM_SLEEP - Cleanups in exynos thermal driver - Add stubs for include/linux/thermal.h. Now drivers using thermal calls but that also work without CONFIG_THERMAL will be able to compile for systems that don't care about thermal. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: int340x_thermal: Ignore missing _ART, _TRT tables thermal/intel_powerclamp: add id for Avoton SoC tools/thermal: tmon: silence 'set but not used' warnings tools/thermal: tmon: use pkg-config to determine library dependencies tools/thermal: tmon: support cross-compiling tools/thermal: tmon: add .gitignore tools/thermal: tmon: fixup tui windowing calculations tools/thermal: tmon: tui: don't hard-code dialog window size assumptions tools/thermal: tmon: add min/max macros tools/thermal: tmon: add --target-temp parameter thermal: exynos: Clean-up code to use oneline entry for exynos compatible table thermal: rcar: Make error and remove paths symmetrical with init thermal: rcar: Fix race condition between init and interrupt thermal: Introduce dummy functions when thermal is not defined ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister" thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Three md fixes: - fix a read-balance problem that was reported 2 years ago, but that I never noticed the report :-( - fix for rare RAID6 problem causing incorrect bitmap updates when two devices fail. - add __ATTR_PREALLOC annotation now that it is possible" * tag 'md/4.0-fixes' of git://neil.brown.name/md: md: mark some attributes as pre-alloc raid5: check faulty flag for array status during recovery. md/raid1: fix read balance when a drive is write-mostly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metagLinus Torvalds authored
Pull arch/metag fix from James Hogan: "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP() macros for metag which have always been erronously returning the PC and stack pointer of the task's kernel context rather than from its user context saved at entry from userland into the kernel, which affects the contents of /proc/<pid>/maps and /proc/<pid>/stat" * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix KSTK_EIP() and KSTK_ESP() macros
-
- Mar 02, 2015
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A CR4-shadow 32-bit init fix, plus two typo fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup() x86/cpu/intel: Fix trivial typo in intel_tlb_table[]
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
-