- May 22, 2014
-
-
Lai Jiangshan authored
Currently, the global freezing state is propagated to worker_pools via POOL_FREEZING and then to each workqueue; however, the middle step - propagation through worker_pools - can be skipped as long as one or more max_active adjustments happens for each workqueue after the update to the global state is visible. The global workqueue freezing state and the max_active adjustments during workqueue creation and [un]freezing are serialized with wq_pool_mutex, so it's trivial to guarantee that max_actives stay in sync with global freezing state. POOL_FREEZING is unnecessary and makes the code more confusing and complicates freeze_workqueues_begin() and thaw_workqueues() by requiring them to walk through all pools. Remove POOL_FREEZING and use workqueue_freezing directly instead. tj: Description and comment updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
first_worker() actually returns the first idle workers, the name first_idle_worker() which is self-commnet will be better. All the callers of first_worker() expect it returns an idle worker, the name first_idle_worker() with "idle" notation makes reviewers happier. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
In 8930caba ("workqueue: disable irq while manipulating PENDING"), setting last CPU and clearing PENDING got merged into a single operation (set_work_cpu_and_clear_pending()), which resulted that the internal routine work_clear_pending() is not used any more. tj: Minor description tweak. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
WORK_CPU_END is totally unused since 4e8b22bd ("workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues"). It should be removed. After it is removed, the comment "special cpu IDs" is not precise due to there is only one special CPU ID (WORK_CPU_UNBOUND) left, so we also change this comment to the description for WORK_CPU_UNBOUND. tj: Minor description and comment tweaks. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
system_highpri_wq is exported to modules via EXPORT_SYMBOL_GPL(), but it was forgotten to be declared in workqueue.h. So we add the declaration and a short description for it. tj: Minor comment tweak. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
- May 20, 2014
-
-
Lai Jiangshan authored
There are several problems with the code that rescuers use to bind themselve to the target pool's cpumask. 1) It is very different from how the normal workers bind to cpumask, increasing code complexity and maintenance overhead. 2) The code of cpu-binding for rescuers is complicated. 3) If one or more cpu hotplugs happen while a rescuer is processing its scheduled work items, the rescuer may not stay bound to the cpumask of the pool. This is an allowed behavior, but is still hairy. It will be better if the cpumask of the rescuer is always kept synchronized with the pool across cpu hotplugs. Using generic attach/detach routine will solve the above problems and results in much simpler code. tj: Minor description updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
Currently, the code to attach a new worker to its pool is embedded in create_worker(). Separating this code out will make the codes clearer and will allow rescuers to share the code path later. tj: Description and comment updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
manager_mutex is only used to protect the attaching for the pool and the pool->workers list. It protects the pool->workers and operations based on this list, such as: cpu-binding for the workers in the pool->workers the operations to set/clear WORKER_UNBOUND So let's rename manager_mutex to attach_mutex to better reflect its role. This patch is a pure rename. tj: Minor command and description updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
In create_worker(), as pool->worker_ida now uses ida_simple_get()/ida_simple_put() and doesn't require external synchronization, it doesn't need manager_mutex. struct worker allocation and kthread allocation are not visible by any one before attached, so they don't need manager_mutex either. The above operations are before the attaching operation which attaches the worker to the pool. Between attaching and starting the worker, the worker is already attached to the pool, so the cpu hotplug will handle cpu-binding for the worker correctly and we don't need the manager_mutex after attaching. The conclusion is that only the attaching operation needs manager_mutex, so we narrow the protection section of manager_mutex in create_worker(). Some comments about manager_mutex are removed, because we will rename it to attach_mutex and add worker_attach_to_pool() later which will be self-explanatory. tj: Minor description updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
We no longer iterate workers via worker_idr and worker_idr is used only for allocating/freeing ID, so we can convert it to worker_ida. By using ida_simple_get/remove(), worker_ida doesn't require external synchronization, so we don't need manager_mutex to protect it and the ID-removal code is allowed to be moved out from worker_detach_from_pool(). In a later patch, worker_detach_from_pool() will be used in rescuers which don't have IDs, so we move the ID-removal code out from worker_detach_from_pool() into worker_thread(). tj: Minor description updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
worker_idr has the iteration (iterating for attached workers) and worker ID duties. These two duties don't have to be tied together. We can separate them and use a list for tracking attached workers and iteration. Before this separation, it wasn't possible to add rescuer workers to worker_idr due to rescuer workers couldn't allocate ID dynamically because ID-allocation depends on memory-allocation, which rescuer can't depend on. After separation, we can easily add the rescuer workers to the list for iteration without any memory-allocation. It is required when we attach the rescuer worker to the pool in later patch. tj: Minor description updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
Since destroy_worker() doesn't need to sleep nor require manager_mutex, destroy_worker() can be directly called in the idle timeout handler, it helps us remove POOL_MANAGE_WORKERS and maybe_destroy_worker() and simplify the manage_workers() After POOL_MANAGE_WORKERS is removed, worker_thread() doesn't need to test whether it needs to manage after processed works. So we can remove the test branch. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com>
-
Lai Jiangshan authored
worker destruction includes these parts of code: adjust pool's stats remove the worker from idle list detach the worker from the pool kthread_stop() to wait for the worker's task exit free the worker struct We can find out that there is no essential work to do after kthread_stop(), which means destroy_worker() doesn't need to wait for the worker's task exit, so we can remove kthread_stop() and free the worker struct in the worker exiting path. However, put_unbound_pool() still needs to sync the all the workers' destruction before destroying the pool; otherwise, the workers may access to the invalid pool when they are exiting. So we also move the code of "detach the worker" to the exiting path and let put_unbound_pool() to sync with this code via detach_completion. The code of "detach the worker" is wrapped in a new function "worker_detach_from_pool()" although worker_detach_from_pool() is only called once (in worker_thread()) after this patch, but we need to wrap it for these reasons: 1) The code of "detach the worker" is not short enough to unfold them in worker_thread(). 2) the name of "worker_detach_from_pool()" is self-comment, and we add some comments above the function. 3) it will be shared by rescuer in later patch which allows rescuer and normal thread use the same attach/detach frameworks. The worker id is freed when detaching which happens before the worker is fully dead, but this id of the dying worker may be re-used for a new worker, so the dying worker's task name is changed to "worker/dying" to avoid two or several workers having the same name. Since "detach the worker" is moved out from destroy_worker(), destroy_worker() doesn't require manager_mutex, so the "lockdep_assert_held(&pool->manager_mutex)" in destroy_worker() is removed, and destroy_worker() is not protected by manager_mutex in put_unbound_pool(). tj: Minor description updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
We used to have the CPU online failure path where a worker is created and then destroyed without being started. A worker was created for the CPU coming online and if the online operation failed the created worker was shut down without being started. But this behavior was changed. The first worker is created and started at the same time for the CPU coming online. It means that we had already ensured in the code that destroy_worker() destroys only idle workers and we don't want to allow it to destroy any non-idle worker in the future. Otherwise, it may be buggy and it may be extremely hard to check. We should force destroy_worker() to destroy only idle workers explicitly. Since destroy_worker() destroys only idle workers, this patch does not change any functionality. We just need to update the comments and the sanity check code. In the sanity check code, we will refuse to destroy the worker if !(worker->flags & WORKER_IDLE). If the worker entered idle which means it is already started, so we remove the check of "worker->flags & WORKER_STARTED", after this removal, WORKER_STARTED is totally unneeded, so we remove WORKER_STARTED too. In the comments for create_worker(), "Create a new worker which is bound..." is changed to "... which is attached..." due to we change the name of this behavior to attaching. tj: Minor description / comment updates. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
worker_idr is highly bound to managers and is always/only accessed in manager lock context. So we don't need pool->lock for it. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
- May 15, 2014
-
-
Jingoo Han authored
system_nrt[_freezable]_wq were deprecated by 3b07e9ca ("workqueue: deprecate system_nrt[_freezable]_wq") and have been deprecated for a long time. In addition, these are not used anymore. So, let's remove these functions. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Jingoo Han authored
flush[_delayed]_work_sync() were deprecated by 43829731 ("workqueue: deprecate flush[_delayed]_work_sync()") and have been deprecated for a long time. In addition, these are not used anymore. So, let's remove these functions. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
- May 13, 2014
-
-
Fabian Frederick authored
tj: Refreshed on top of wq/for-3.16. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
- Apr 19, 2014
-
-
Daeseok Youn authored
workqueue: simplify wq_update_unbound_numa() by jumping to use_dfl_pwq if the target cpumask equals wq's wq_update_unbound_numa(), when it's decided that the newly updated cpumask equals the default, looks at whether the current pwq is already the default one and skips setting pwq to the default one. This extra step is unnecessary and we can always jump to use_dfl_pwq instead. Simplify the code by removing the conditional. This doesn't make any functional difference. Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lai Jiangshan authored
There is a race condition between rescuer_thread() and pwq_unbound_release_workfn(). Even after a pwq is scheduled for rescue, the associated work items may be consumed by any worker. If all of them are consumed before the rescuer gets to them and the pwq's base ref was put due to attribute change, the pwq may be released while still being linked on @wq->maydays list making the rescuer dereference already freed pwq later. Make send_mayday() pin the target pwq until the rescuer is done with it. tj: Updated comment and patch description. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v3.10+
-
- Apr 18, 2014
-
-
Lai Jiangshan authored
After a @pwq is scheduled for emergency execution, other workers may consume the affectd work items before the rescuer gets to them. This means that a workqueue many have pwqs queued on @wq->maydays list while not having any work item pending or in-flight. If destroy_workqueue() executes in such condition, the rescuer may exit without emptying @wq->maydays. This currently doesn't cause any actual harm. destroy_workqueue() can safely destroy all the involved data structures whether @wq->maydays is populated or not as nobody access the list once the rescuer exits. However, this is nasty and makes future development difficult. Let's update rescuer_thread() so that it empties @wq->maydays after seeing should_stop to guarantee that the list is empty on rescuer exit. tj: Updated comment and patch description. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org # v3.10+
-
- Apr 17, 2014
-
-
Daeseok Youn authored
wq_update_unbound_numa() failure path has the following two bugs. - alloc_unbound_pwq() is called without holding wq->mutex; however, if the allocation fails, it jumps to out_unlock which tries to unlock wq->mutex. - The function should switch to dfl_pwq on failure but didn't do so after alloc_unbound_pwq() failure. Fix it by regrabbing wq->mutex and jumping to use_dfl_pwq on alloc_unbound_pwq() failure. Signed-off-by:
Daeseok Youn <daeseok.youn@gmail.com> Acked-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Fixes: 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues")
-
- Apr 14, 2014
-
-
Linus Torvalds authored
-
Geert Uytterhoeven authored
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the following warning when comparing with PAGE_SIZE, which is always "unsigned long": fs/cifs/file.c: In function ‘cifs_readdata_to_iov’: fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast Introduced by commit 7f25bba8 ("cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()"), which changed the signedness of "remaining" and the code from min_t() to min(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate
-
- Apr 13, 2014
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild changes from Michal Marek: "Here is the non-critical part of kbuild: - One bogus coccinelle check removed, one check fixed not to suggest the obsolete PTR_RET macro - scripts/tags.sh does not index the generated *.mod.c files - new objdiff tool to list differences between two versions of an object file - A fix for scripts/bootgraph.pl" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/coccinelle: Use PTR_ERR_OR_ZERO scripts/bootgraph.pl: Add graphic header scripts: objdiff: detect object code changes between two commits Coccicheck: Remove memcpy to struct assignment test scripts/tags.sh: Ignore *.mod.c
-
Mikulas Patocka authored
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Mackerras authored
Commit 8f619b54 ("powerpc/ppc64: Do not turn AIL (reloc-on interrupts) too early") added code to set the AIL bit in the LPCR without checking whether the kernel is running in hypervisor mode. The result is that when the kernel is running as a guest (i.e., under PowerKVM or PowerVM), the processor takes a privileged instruction interrupt at that point, causing a panic. The visible result is that the kernel hangs after printing "returning from prom_init". This fixes it by checking for hypervisor mode being available before setting LPCR. If we are not in hypervisor mode, we enable relocation-on interrupts later in pSeries_setup_arch using the H_SET_MODE hcall. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
Commits 11d4616b ("futex: revert back to the explicit waiter counting code") and 69cd9eba ("futex: avoid race between requeue and wake") changed some of the finer details of how we think about futexes. One was a late fix and the other a consequence of overlooking the whole requeuing logic. The first change caused our documentation to be incorrect, and the second made us aware that we need to explicitly add more details to it. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ...
-
Linus Torvalds authored
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Code cleanup, some previously ignored patches, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: cleanup board files bf609: clock: drop unused clock bit set/clear functions Blackfin: bf537: rename "CONFIG_ADT75" Blackfin: bf537: rename "CONFIG_AD7314" Blackfin: bf537: rename ad2s120x ->ad2s1200 blackfin: bf537: fix typo "CONFIG_SND_SOC_ADV80X_MODULE" blackfin: dma: current count mmr is read only bfin_crc: Move architecture independant crc header file out of the blackfin folder. bf54x: drop unuesd HOST status,control,timeout registers bit define macros blackfin: portmux: cleanup head file Blackfin: remove "config IP_CHECKSUM_L1" blackfin: Remove GENERIC_GPIO config option again blackfin:Use generic /proc/interrupts implementation blackfin: bf60x: fix typo "CONFIG_PM_BFIN_WAKE_PA15_POL"
-
Linus Torvalds authored
Merge tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc cleanups from Ohad Ben-Cohen: "Several remoteproc cleanup patches coming from Jingoo Han, Julia Lawall and Uwe Kleine-König" * tag 'remoteproc-3.15-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc/ste_modem: staticize local symbols remoteproc/davinci: simplify use of devm_ioremap_resource remoteproc/davinci: drop needless devm_clk_put
-
git://git.linuxfoundation.org/llvmlinux/kernelLinus Torvalds authored
Pull llvm patches from Behan Webster: "These are some initial updates to support compiling the kernel with clang. These patches have been through the proper reviews to the best of my ability, and have been soaking in linux-next for a few weeks. These patches by themselves still do not completely allow clang to be used with the kernel code, but lay the foundation for other patches which are still under review. Several other of the LLVMLinux patches have been already added via maintainer trees" * tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel: x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" x86 kbuild: LLVMLinux: More cc-options added for clang x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h LLVMLinux: Remove warning about returning an uninitialized variable kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang Documentation: LLVMLinux: Update Documentation/dontdiff kbuild: LLVMLinux: Adapt warnings for compilation with clang kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target updates from Nicholas Bellinger: "Here are the target pending updates for v3.15-rc1. Apologies in advance for waiting until the second to last day of the merge window to send these out. The highlights this round include: - iser-target support for T10 PI (DIF) offloads (Sagi + Or) - Fix Task Aborted Status (TAS) handling in target-core (Alex Leung) - Pass in transport supported PI at session initialization (Sagi + MKP + nab) - Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi) - Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab) - Fix tcm_fc use-after-free of ft_tpg (Andy Grover) - Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn) Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI metadata into KVM guest have been left-out for now, as there where a few comments from MST + Paolo that where not able to be addressed in time for v3.15. Please expect this feature for v3.16-rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits) ib_srpt: Use correct ib_sg_dma primitives target/tcm_fc: Rename ft_tport_create to ft_tport_get target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn target/tcm_fc: Rename structs and list members for clarity target/tcm_fc: Limit to 1 TPG per wwn target/tcm_fc: Don't export ft_lport_list target/tcm_fc: Fix use-after-free of ft_tpg target: Add check to prevent Abort Task from aborting itself target: Enable READ_STRIP emulation in target_complete_ok_work target/sbc: Add sbc_dif_read_strip software emulation target: Enable WRITE_INSERT emulation in target_execute_cmd target/sbc: Add sbc_dif_generate software emulation target/sbc: Only expose PI read_cap16 bits when supported by fabric target/spc: Only expose PI mode page bits when supported by fabric target/spc: Only expose PI inquiry bits when supported by fabric target: Pass in transport supported PI at session initialization target/iblock: Fix double bioset_integrity_free bug Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist target/rd: T10-Dif: RAM disk is allocating more space than required. iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "A series of bug fix patches for v3.15-rc1. Most are just driver fixes. There are some changes at remote controller core level, fixing some definitions on a new API added for Kernel v3.15. It also adds the missing include at include/uapi/linux/v4l2-common.h, to allow its compilation on userspace, as pointed by you" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (24 commits) [media] gpsca: remove the risk of a division by zero [media] stk1160: warrant a NUL terminated string [media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers [media] v4l: ti-vpe: Set correct field parameter for output and capture buffers [media] v4l: ti-vpe: zero out reserved fields in try_fmt [media] v4l: ti-vpe: Fix initial configuration queue data [media] v4l: ti-vpe: Use correct bus_info name for the device in querycap [media] v4l: ti-vpe: report correct capabilities in querycap [media] v4l: ti-vpe: Allow usage of smaller images [media] v4l: ti-vpe: Use video_device_release_empty [media] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs [media] lgdt3305: include sleep functionality in lgdt3304_ops [media] drx-j: use customise option correctly [media] m88rs2000: fix sparse static warnings [media] r820t: fix size and init values [media] rc-core: remove generic scancode filter [media] rc-core: split dev->s_filter [media] rc-core: do not change 32bit NEC scancode format for now [media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03 [media] xc2028: add missing break to switch ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull PCIe non-transparent bridge fixes and features from Jon Mason: "NTB driver bug fixes to address issues in list traversal, skb leak in ntb_netdev, a typo, and a leak of msix entries in the error path. Clean ups of the event handling logic, as well as a overall style cleanup. Finally, the driver was converted to use the new pci_enable_msix_range logic (and the refactoring to go along with it)" * tag 'ntb-3.15' of git://github.com/jonmason/ntb: ntb: Use pci_enable_msix_range() instead of pci_enable_msix() ntb: Split ntb_setup_msix() into separate BWD/SNB routines ntb: Use pci_msix_vec_count() to obtain number of MSI-Xs NTB: Code Style Clean-up NTB: client event cleanup ntb: Fix leakage of ntb_device::msix_entries[] array NTB: Fix typo in setting one translation register ntb_netdev: Fix skb free issue in open ntb_netdev: Fix list_for_each_entry exit issue
-
Linus Torvalds authored
The vfs merge caused a latent bug to show up: In file included from fs/ceph/super.h:4:0, from fs/ceph/ioctl.c:3: include/linux/ceph/ceph_debug.h:4:0: warning: "pr_fmt" redefined [enabled by default] #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt ^ In file included from include/linux/kernel.h:13:0, from include/linux/uio.h:12, from include/linux/socket.h:7, from include/uapi/linux/in.h:22, from include/linux/in.h:23, from fs/ceph/ioctl.c:1: include/linux/printk.h:214:0: note: this is the location of the previous definition #define pr_fmt(fmt) fmt ^ where the reason is that <linux/ceph_debug.h> is included much too late for the "pr_fmt()" define. The include of <linux/ceph_debug.h> needs to be the first include in the file, but fs/ceph/ioctl.c had for some reason missed that, and it wasn't noticeable until some unrelated header file changes brought in an indirect earlier include of <linux/kernel.h>. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
-
David S. Miller authored
Nicolas Dichtel says: ==================== tunnels: don't allow to add the same tunnel twice This series fixes the check of an existing tunnel with the same parameters when a new tunnel is added. I've checked all users of ip_tunnel_newlink(): gre, gretap, ipip and vti. The bug exists only for gre and vti. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-