Commits · 65e2a74c44ddfa174b700f5da2d1d29b4ba6639b · Mirrors / github.com / raspberrypi_linux

Nov 23, 2023

nvme: target: fix Kconfig select statements · 65e2a74c

Arnd Bergmann authored Nov 22, 2023



When the NVME target code is built-in but its TCP frontend is a loadable
module, enabling keyring support causes a link failure:

x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'

The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that
depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from
it inherits the state of the tristate symbol rather than the intended
CONFIG_NVME_TARGET one that contains the actual call.

The same thing is true for CONFIG_KEYS, which itself is required for
NVME_KEYRING.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.org


Signed-off-by: Jens Axboe <axboe@kernel.dk>

65e2a74c

nvme: target: fix nvme_keyring_id() references · d78abcba

Arnd Bergmann authored Nov 22, 2023



In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring
code might not be available, or using it will result in a runtime
failure:

x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'

Add a check to ensure we only check the keyring if there is a chance
of it being used, which avoids both the runtime and link-time
problems.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.org


Signed-off-by: Jens Axboe <axboe@kernel.dk>

d78abcba

Merge tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme into block-6.7 · 55072cd7

Jens Axboe authored Nov 22, 2023

Pull NVMe fixes from Keith:

"nvme fixes for Linux 6.7

 - TCP TLS fixes (Hannes)
 - Authentifaction fixes (Mark, Hannes)
 - Properly terminate target names (Christoph)"

* tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme:
  nvme: move nvme_stop_keep_alive() back to original position
  nvmet-tcp: always initialize tls_handshake_tmo_work
  nvmet: nul-terminate the NQNs passed in the connect command
  nvme: blank out authentication fabrics options if not configured
  nvme: catch errors from nvme_configure_metadata()
  nvme-tcp: only evaluate 'tls' option if TLS is selected
  nvme-auth: set explanation code for failure2 msgs
  nvme-auth: unlock mutex in one place only

55072cd7

nvme: move nvme_stop_keep_alive() back to original position · 3af755a4

Hannes Reinecke authored Nov 21, 2023



Stopping keep-alive not only stops the keep-alive workqueue,
but also needs to be synchronized with I/O termination as we
must not send a keep-alive command after all I/O had been
terminated.
So to avoid any regressions move the call to stop_keep_alive()
back to its original position and ensure that keep-alive is
correctly stopped failing to setup the admin queue.

Fixes: 4733b65d ("nvme: start keep-alive after admin queue setup")
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>

3af755a4

Nov 21, 2023

nbd: pass nbd_sock to nbd_read_reply() instead of index · 98c598af

Li Nan authored Sep 11, 2023



If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.

  T1
  nbd_ioctl
   __nbd_ioctl
    nbd_add_socket
     blk_mq_freeze_queue
				T2
  				recv_work
  				 nbd_read_reply
  				  sock_xmit
     krealloc config->socks
				   def config->socks

Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.

==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779

Workqueue: knbd4-recv recv_work
Call Trace:
 __dump_stack
 dump_stack+0xbe/0xfd
 print_address_description.constprop.0+0x19/0x170
 __kasan_report.cold+0x6c/0x84
 kasan_report+0x3a/0x50
 sock_xmit+0x525/0x550
 nbd_read_reply+0xfe/0x2c0
 recv_work+0x1c2/0x750
 process_one_work+0x6b6/0xf10
 worker_thread+0xdd/0xd80
 kthread+0x30a/0x410
 ret_from_fork+0x22/0x30

Allocated by task 18784:
 kasan_save_stack+0x1b/0x40
 kasan_set_track
 set_alloc_info
 __kasan_kmalloc
 __kasan_kmalloc.constprop.0+0xf0/0x130
 slab_post_alloc_hook
 slab_alloc_node
 slab_alloc
 __kmalloc_track_caller+0x157/0x550
 __do_krealloc
 krealloc+0x37/0xb0
 nbd_add_socket
 +0x2d3/0x880
 __nbd_ioctl
 nbd_ioctl+0x584/0x8e0
 __blkdev_driver_ioctl
 blkdev_ioctl+0x2a0/0x6e0
 block_ioctl+0xee/0x130
 vfs_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x138/0x190
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

Freed by task 18784:
 kasan_save_stack+0x1b/0x40
 kasan_set_track+0x1c/0x30
 kasan_set_free_info+0x20/0x40
 __kasan_slab_free.part.0+0x13f/0x1b0
 slab_free_hook
 slab_free_freelist_hook
 slab_free
 kfree+0xcb/0x6c0
 krealloc+0x56/0xb0
 nbd_add_socket+0x2d3/0x880
 __nbd_ioctl
 nbd_ioctl+0x584/0x8e0
 __blkdev_driver_ioctl
 blkdev_ioctl+0x2a0/0x6e0
 block_ioctl+0xee/0x130
 vfs_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x138/0x190
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

98c598af

s390/dasd: protect device queue against concurrent access · db46cd1e

Jan Höppner authored Oct 25, 2023



In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.

Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.

Cc:  <stable@vger.kernel.org>
Fixes: 4fa52aa7 ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

db46cd1e

s390/dasd: resolve spelling mistake · 5029c5e4

Muhammad Muzammil authored Oct 25, 2023



resolve typing mistake from pimary to primary

Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com>
Link: https://lore.kernel.org/r/20231010043140.28416-1-m.muzzammilashraf@gmail.com


Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-2-sth@linux.ibm.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

5029c5e4

block/null_blk: Fix double blk_mq_start_request() warning · 53f2bca2

Chengming Zhou authored Nov 20, 2023

When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, null_queue_rq()
would return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE for the request,
which has been marked as MQ_RQ_IN_FLIGHT by blk_mq_start_request().

Then null_queue_rqs() put these requests in the rqlist, return back to
the block layer core, which would try to queue them individually again,
so the warning in blk_mq_start_request() triggered.

Fix it by splitting the null_queue_rq() into two parts: the first is the
preparation of request, the second is the handling of request. We put
the blk_mq_start_request() after the preparation part, which may fail
and return back to the block layer core.

The throttling also belongs to the preparation part, so move it before
blk_mq_start_request(). And change the return type of null_handle_cmd()
to void, since it always return BLK_STS_OK now.

Reported-by: <syzbot+fcc47ba2476570cbbeb0@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/all/0000000000000e6aac06098aee0c@google.com/

Fixes: d78bfa13 ("block/null_blk: add queue_rqs() support")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20231120032521.1012037-1-chengming.zhou@linux.dev

Signed-off-by: Jens Axboe <axboe@kernel.dk>

53f2bca2

nvmet-tcp: always initialize tls_handshake_tmo_work · 11b9d0b4

Hannes Reinecke authored Oct 20, 2023



The TLS handshake timeout work item should always be
initialized to avoid a crash when cancelling the workqueue.

Fixes: 675b453e ("nvmet-tcp: enable TLS handshake upcall")
Suggested-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>

11b9d0b4

nvmet: nul-terminate the NQNs passed in the connect command · 1c22e029

Christoph Hellwig authored Nov 17, 2023



The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings.  Ensure they actually are
nul-terminated before using them.

Fixes: a07b4970 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

1c22e029

nvme: blank out authentication fabrics options if not configured · c7ca9757

Hannes Reinecke authored Nov 16, 2023



If the config option NVME_HOST_AUTH is not selected we should not
accept the corresponding fabrics options. This allows userspace
to detect if NVMe authentication has been enabled for the kernel.

Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f50fff73 ("nvme: implement In-Band authentication")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

c7ca9757

nvme: catch errors from nvme_configure_metadata() · cd9aed60

Hannes Reinecke authored Nov 14, 2023



nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

cd9aed60

nvme-tcp: only evaluate 'tls' option if TLS is selected · 23441536

Hannes Reinecke authored Nov 14, 2023



We only need to evaluate the 'tls' connect option if TLS is
enabled; otherwise we might be getting a link error.

Fixes: 706add13 ("nvme: keyring: fix conditional compilation")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202311140426.0eHrTXBr-lkp@intel.com/


Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

23441536

nvme-auth: set explanation code for failure2 msgs · 38ce1570

Mark O'Donovan authored Oct 11, 2023



Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>

38ce1570

nvme-auth: unlock mutex in one place only · 616add70

Mark O'Donovan authored Oct 11, 2023



Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

616add70

block: Remove blk_set_runtime_active() · c96b8175

Damien Le Moal authored Nov 20, 2023



The function blk_set_runtime_active() is called only from
blk_post_runtime_resume(), so there is no need for that function to be
exported. Open-code this function directly in blk_post_runtime_resume()
and remove it.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231120070611.33951-1-dlemoal@kernel.org


Signed-off-by: Jens Axboe <axboe@kernel.dk>

c96b8175

nbd: fix null-ptr-dereference while accessing 'nbd->config' · c2da049f

Li Nan authored Nov 17, 2023



Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.

   T1                      T2
   nbd_open
    nbd_get_config_unlocked
                 	   nbd_genl_connect
                 	    nbd_alloc_and_init_config
                 	     //memory reordered
                  	     refcount_set(&nbd->config_refs, 1)  // 2
     nbd->config
      ->null point
			     nbd->config = config  // 1

Fix it by adding smp barrier to guarantee the execution sequence.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

c2da049f

nbd: factor out a helper to get nbd_config without holding 'config_lock' · 3123ac77

Li Nan authored Nov 17, 2023



There are no functional changes, just to make code cleaner and prepare
to fix null-ptr-dereference while accessing 'nbd->config'.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-3-linan666@huaweicloud.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

3123ac77

nbd: fold nbd config initialization into nbd_alloc_config() · 1b598605

Li Nan authored Nov 17, 2023



There are no functional changes, make the code cleaner and prepare to
fix null-ptr-dereference while accessing 'nbd->config'.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-2-linan666@huaweicloud.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

1b598605

Merge tag 'md-fixes-20231120' of... · 8a554c62

Jens Axboe authored Nov 20, 2023

Merge tag 'md-fixes-20231120' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.7

Pull MD fix from Song.

* tag 'md-fixes-20231120' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: fix bi_status reporting in md_end_clone_io

8a554c62

bcache: avoid NULL checking to c->root in run_cache_set() · 3eba5e0b

Coly Li authored Nov 20, 2023

In run_cache_set() after c->root returned from bch_btree_node_get(), it
is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL
because bch_btree_node_get() will not return NULL pointer to caller.

This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de

Signed-off-by: Jens Axboe <axboe@kernel.dk>

3eba5e0b

bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc() · 31f5b956

Coly Li authored Nov 20, 2023



This patch adds code comments to bch_btree_node_get() and
__bch_btree_node_alloc() that NULL pointer will not be returned and it
is unnecessary to check NULL pointer by the callers of these routines.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

31f5b956

bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce() · f72f4312

Coly Li authored Nov 20, 2023



Commit 028ddcac ("bcache: Remove unnecessary NULL point check in
node allocations") do the following change inside btree_gc_coalesce(),

31 @@ -1340,7 +1340,7 @@ static int btree_gc_coalesce(
32         memset(new_nodes, 0, sizeof(new_nodes));
33         closure_init_stack(&cl);
34
35 -       while (nodes < GC_MERGE_NODES && !IS_ERR_OR_NULL(r[nodes].b))
36 +       while (nodes < GC_MERGE_NODES && !IS_ERR(r[nodes].b))
37                 keys += r[nodes++].keys;
38
39         blocks = btree_default_blocks(b->c) * 2 / 3;

At line 35 the original r[nodes].b is not always allocatored from
__bch_btree_node_alloc(), and possibly initialized as NULL pointer by
caller of btree_gc_coalesce(). Therefore the change at line 36 is not
correct.

This patch replaces the mistaken IS_ERR() by IS_ERR_OR_NULL() to avoid
potential issue.

Fixes: 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations")
Cc:  <stable@vger.kernel.org> # 6.5+
Cc: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-9-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

f72f4312

bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race · 2faac25d

Mingzhe Zou authored Nov 20, 2023



We get a kernel crash about "unable to handle kernel paging request":

```dmesg
[368033.032005] BUG: unable to handle kernel paging request at ffffffffad9ae4b5
[368033.032007] PGD fc3a0d067 P4D fc3a0d067 PUD fc3a0e063 PMD 8000000fc38000e1
[368033.032012] Oops: 0003 [#1] SMP PTI
[368033.032015] CPU: 23 PID: 55090 Comm: bch_dirtcnt[0] Kdump: loaded Tainted: G           OE    --------- -  - 4.18.0-147.5.1.es8_24.x86_64 #1
[368033.032017] Hardware name: Tsinghua Tongfang THTF Chaoqiang Server/072T6D, BIOS 2.4.3 01/17/2017
[368033.032027] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
[368033.032029] Code: 8b 02 48 85 c0 74 f6 48 89 c1 eb d0 c1 e9 12 83 e0
03 83 e9 01 48 c1 e0 05 48 63 c9 48 05 c0 3d 02 00 48 03 04 cd 60 68 93
ad <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 02
[368033.032031] RSP: 0018:ffffbb48852abe00 EFLAGS: 00010082
[368033.032032] RAX: ffffffffad9ae4b5 RBX: 0000000000000246 RCX: 0000000000003bf3
[368033.032033] RDX: ffff97b0ff8e3dc0 RSI: 0000000000600000 RDI: ffffbb4884743c68
[368033.032034] RBP: 0000000000000001 R08: 0000000000000000 R09: 000007ffffffffff
[368033.032035] R10: ffffbb486bb01000 R11: 0000000000000001 R12: ffffffffc068da70
[368033.032036] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
[368033.032038] FS:  0000000000000000(0000) GS:ffff97b0ff8c0000(0000) knlGS:0000000000000000
[368033.032039] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[368033.032040] CR2: ffffffffad9ae4b5 CR3: 0000000fc3a0a002 CR4: 00000000003626e0
[368033.032042] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[368033.032043] bcache: bch_cached_dev_attach() Caching rbd479 as bcache462 on set 8cff3c36-4a76-4242-afaa-7630206bc70b
[368033.032045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[368033.032046] Call Trace:
[368033.032054]  _raw_spin_lock_irqsave+0x32/0x40
[368033.032061]  __wake_up_common_lock+0x63/0xc0
[368033.032073]  ? bch_ptr_invalid+0x10/0x10 [bcache]
[368033.033502]  bch_dirty_init_thread+0x14c/0x160 [bcache]
[368033.033511]  ? read_dirty_submit+0x60/0x60 [bcache]
[368033.033516]  kthread+0x112/0x130
[368033.033520]  ? kthread_flush_work_fn+0x10/0x10
[368033.034505]  ret_from_fork+0x35/0x40
```

The crash occurred when call wake_up(&state->wait), and then we want
to look at the value in the state. However, bch_sectors_dirty_init()
is not found in the stack of any task. Since state is allocated on
the stack, we guess that bch_sectors_dirty_init() has exited, causing
bch_dirty_init_thread() to be unable to handle kernel paging request.

In order to verify this idea, we added some printing information during
wake_up(&state->wait). We find that "wake up" is printed twice, however
we only expect the last thread to wake up once.

```dmesg
[  994.641004] alcache: bch_dirty_init_thread() wake up
[  994.641018] alcache: bch_dirty_init_thread() wake up
[  994.641523] alcache: bch_sectors_dirty_init() init exit
```

There is a race. If bch_sectors_dirty_init() exits after the first wake
up, the second wake up will trigger this bug("unable to handle kernel
paging request").

Proceed as follows:

bch_sectors_dirty_init
    kthread_run ==============> bch_dirty_init_thread(bch_dirtcnt[0])
            ...                         ...
    atomic_inc(&state.started)          ...
            ...                         ...
    atomic_read(&state.enough)          ...
            ...                 atomic_set(&state->enough, 1)
    kthread_run ======================================================> bch_dirty_init_thread(bch_dirtcnt[1])
            ...                 atomic_dec_and_test(&state->started)            ...
    atomic_inc(&state.started)          ...                                     ...
            ...                 wake_up(&state->wait)                           ...
    atomic_read(&state.enough)                                          atomic_dec_and_test(&state->started)
            ...                                                                 ...
    wait_event(state.wait, atomic_read(&state.started) == 0)                    ...
    return                                                                      ...
                                                                        wake_up(&state->wait)

We believe it is very common to wake up twice if there is no dirty, but
crash is an extremely low probability event. It's hard for us to reproduce
this issue. We attached and detached continuously for a week, with a total
of more than one million attaches and only one crash.

Putting atomic_inc(&state.started) before kthread_run() can avoid waking
up twice.

Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc:  <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-8-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

2faac25d

bcache: fixup lock c->root error · e34820f9

Mingzhe Zou authored Nov 20, 2023



We had a problem with io hung because it was waiting for c->root to
release the lock.

crash> cache_set.root -l cache_set.list ffffa03fde4c0050
  root = 0xffff802ef454c800
crash> btree -o 0xffff802ef454c800 | grep rw_semaphore
  [ffff802ef454c858] struct rw_semaphore lock;
crash> struct rw_semaphore ffff802ef454c858
struct rw_semaphore {
  count = {
    counter = -4294967297
  },
  wait_list = {
    next = 0xffff00006786fc28,
    prev = 0xffff00005d0efac8
  },
  wait_lock = {
    raw_lock = {
      {
        val = {
          counter = 0
        },
        {
          locked = 0 '\000',
          pending = 0 '\000'
        },
        {
          locked_pending = 0,
          tail = 0
        }
      }
    }
  },
  osq = {
    tail = {
      counter = 0
    }
  },
  owner = 0xffffa03fdc586603
}

The "counter = -4294967297" means that lock count is -1 and a write lock
is being attempted. Then, we found that there is a btree with a counter
of 1 in btree_cache_freeable.

crash> cache_set -l cache_set.list ffffa03fde4c0050 -o|grep btree_cache
  [ffffa03fde4c1140] struct list_head btree_cache;
  [ffffa03fde4c1150] struct list_head btree_cache_freeable;
  [ffffa03fde4c1160] struct list_head btree_cache_freed;
  [ffffa03fde4c1170] unsigned int btree_cache_used;
  [ffffa03fde4c1178] wait_queue_head_t btree_cache_wait;
  [ffffa03fde4c1190] struct task_struct *btree_cache_alloc_lock;
crash> list -H ffffa03fde4c1140|wc -l
973
crash> list -H ffffa03fde4c1150|wc -l
1123
crash> cache_set.btree_cache_used -l cache_set.list ffffa03fde4c0050
  btree_cache_used = 2097
crash> list -s btree -l btree.list -H ffffa03fde4c1140|grep -E -A2 "^  lock = {" > btree_cache.txt
crash> list -s btree -l btree.list -H ffffa03fde4c1150|grep -E -A2 "^  lock = {" > btree_cache_freeable.txt
[root@node-3 127.0.0.1-2023-08-04-16:40:28]# pwd
/var/crash/127.0.0.1-2023-08-04-16:40:28
[root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache.txt|grep counter|grep -v "counter = 0"
[root@node-3 127.0.0.1-2023-08-04-16:40:28]# cat btree_cache_freeable.txt|grep counter|grep -v "counter = 0"
      counter = 1

We found that this is a bug in bch_sectors_dirty_init() when locking c->root:
    (1). Thread X has locked c->root(A) write.
    (2). Thread Y failed to lock c->root(A), waiting for the lock(c->root A).
    (3). Thread X bch_btree_set_root() changes c->root from A to B.
    (4). Thread X releases the lock(c->root A).
    (5). Thread Y successfully locks c->root(A).
    (6). Thread Y releases the lock(c->root B).

        down_write locked ---(1)----------------------┐
                |                                     |
                |   down_read waiting ---(2)----┐     |
                |           |               ┌-------------┐ ┌-------------┐
        bch_btree_set_root ===(3)========>> | c->root   A | | c->root   B |
                |           |               └-------------┘ └-------------┘
            up_write ---(4)---------------------┘     |            |
                            |                         |            |
                    down_read locked ---(5)-----------┘            |
                            |                                      |
                        up_read ---(6)-----------------------------┘

Since c->root may change, the correct steps to lock c->root should be
the same as bch_root_usage(), compare after locking.

static unsigned int bch_root_usage(struct cache_set *c)
{
        unsigned int bytes = 0;
        struct bkey *k;
        struct btree *b;
        struct btree_iter iter;

        goto lock_root;

        do {
                rw_unlock(false, b);
lock_root:
                b = c->root;
                rw_lock(false, b, b->level);
        } while (b != c->root);

        for_each_key_filter(&b->keys, k, &iter, bch_ptr_bad)
                bytes += bkey_bytes(k);

        rw_unlock(false, b);

        return (bytes * 100) / btree_bytes(c);
}

Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc:  <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-7-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

e34820f9

bcache: fixup init dirty data errors · 7cc47e64

Mingzhe Zou authored Nov 20, 2023



We found that after long run, the dirty_data of the bcache device
will have errors. This error cannot be eliminated unless re-register.

We also found that reattach after detach, this error can accumulate.

In bch_sectors_dirty_init(), all inode <= d->id keys will be recounted
again. This is wrong, we only need to count the keys of the current
device.

Fixes: b144e45f ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Cc:  <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-6-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

7cc47e64

bcache: prevent potential division by zero error · 2c7f497a

Rand Deeb authored Nov 20, 2023



In SHOW(), the variable 'n' is of type 'size_t.' While there is a
conditional check to verify that 'n' is not equal to zero before
executing the 'do_div' macro, concerns arise regarding potential
division by zero error in 64-bit environments.

The concern arises when 'n' is 64 bits in size, greater than zero, and
the lower 32 bits of it are zeros. In such cases, the conditional check
passes because 'n' is non-zero, but the 'do_div' macro casts 'n' to
'uint32_t,' effectively truncating it to its lower 32 bits.
Consequently, the 'n' value becomes zero.

To fix this potential division by zero error and ensure precise
division handling, this commit replaces the 'do_div' macro with
div64_u64(). div64_u64() is designed to work with 64-bit operands,
guaranteeing that division is performed correctly.

This change enhances the robustness of the code, ensuring that division
operations yield accurate results in all scenarios, eliminating the
possibility of division by zero, and improving compatibility across
different 64-bit environments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Cc:  <stable@vger.kernel.org>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-5-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

2c7f497a

bcache: remove redundant assignment to variable cur_idx · be93825f

Colin Ian King authored Nov 20, 2023



Variable cur_idx is being initialized with a value that is never read,
it is being re-assigned later in a while-loop. Remove the redundant
assignment. Cleans up clang scan build warning:

drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx'
is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

be93825f

bcache: check return value from btree_node_alloc_replacement() · 777967e7

Coly Li authored Nov 20, 2023



In btree_gc_rewrite_node(), pointer 'n' is not checked after it returns
from btree_gc_rewrite_node(). There is potential possibility that 'n' is
a non NULL ERR_PTR(), referencing such error code is not permitted in
following code. Therefore a return value checking is necessary after 'n'
is back from btree_node_alloc_replacement().

Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc:  <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231120052503.6122-3-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

777967e7

bcache: avoid oversize memory allocation by small stripe_size · baf8fb7e

Coly Li authored Nov 20, 2023



Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.

Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.

For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.

To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size by a value multiplying limits.io_opt and euqal or
  large than BCH_MIN_STRIPE_SZ.

Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.

Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.

Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de


Signed-off-by: Jens Axboe <axboe@kernel.dk>

baf8fb7e

Nov 20, 2023

md: fix bi_status reporting in md_end_clone_io · 45b47895

Song Liu authored Nov 17, 2023



md_end_clone_io() may overwrite error status in orig_bio->bi_status with
BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by
md_submit_bio => bio_split_to_limits, for example). As a result, upper
layer may miss error reported from md (or the device) and consider the
failed IO was successful.

Fix this by only update orig_bio->bi_status when current bio reports
error and orig_bio is BLK_STS_OK. This is the same behavior as
__bio_chain_endio().

Fixes: 10764815 ("md: add io accounting for raid0 and raid5")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Bhanu Victor DiCara <00bvd0+linux@gmail.com>
Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/


Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>

45b47895

Nov 18, 2023

blk-cgroup: bypass blkcg_deactivate_policy after destroying · e63a5730

Ming Lei authored Nov 17, 2023



blkcg_deactivate_policy() can be called after blkg_destroy_all()
returns, and it isn't necessary since blkg_destroy_all has covered
policy deactivation.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-4-ming.lei@redhat.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

e63a5730

blk-cgroup: avoid to warn !rcu_read_lock_held() in blkg_lookup() · 35a99d65

Ming Lei authored Nov 17, 2023



So far, all callers either holds spin lock or rcu read explicitly, and
most of the caller has added WARN_ON_ONCE(!rcu_read_lock_held()) or
lockdep_assert_held(&disk->queue->queue_lock).

Remove WARN_ON_ONCE(!rcu_read_lock_held()) from blkg_lookup() for
killing the false positive warning from blkg_conf_prep().

Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: 83462a6c ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-3-ming.lei@redhat.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

35a99d65

blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!" · 27b13e20

Ming Lei authored Nov 17, 2023



Inside blkg_for_each_descendant_pre(), both
css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock,
and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held()
is called.

Fix the warning by adding rcu read lock.

Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

27b13e20

Nov 13, 2023

blk-mq: make sure active queue usage is held for bio_integrity_prep() · b0077e26

Christoph Hellwig authored Nov 13, 2023



blk_integrity_unregister() can come if queue usage counter isn't held
for one bio with integrity prepared, so this request may be completed with
calling profile->complete_fn, then kernel panic.

Another constraint is that bio_integrity_prep() needs to be called
before bio merge.

Fix the issue by:

- call bio_integrity_prep() with one queue usage counter grabbed reliably

- call bio_integrity_prep() before bio merge

Fixes: 900e0807 ("block: move queue enter logic into blk_mq_submit_bio()")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20231113035231.2708053-1-ming.lei@redhat.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

b0077e26

Linux 6.7-rc1 · b85ea95d
Linus Torvalds authored Nov 12, 2023

b85ea95d

wifi: iwlwifi: fix system commands group ordering · e257da57

Miri Korenblit authored Nov 12, 2023

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/

Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

e257da57

Merge tag 'parisc-for-6.7-rc1-2' of... · b57b17e8

Linus Torvalds authored Nov 12, 2023

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

b57b17e8

Merge tag 'loongarch-6.7' of... · 4eeee663

Linus Torvalds authored Nov 12, 2023

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

4eeee663

Merge tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 5dd2020f

Linus Torvalds authored Nov 12, 2023

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

5dd2020f