Skip to content
  1. Nov 07, 2022
  3. Nov 05, 2022
  5. Nov 04, 2022
    • David S. Miller's avatar
      Merge branch 'net-ipa-more-endpoints' · 95ec6bce
      David S. Miller authored 
      

Alex Elder says:

====================
net: ipa: support more endpoints

This series adds support for more than 32 IPA endpoints.  To do
this, five registers whose bits represent endpoint state are
replicated as needed to represent endpoints beyond 32.  For existing
platforms, the number of endpoints is never greater than 32, so
there is just one of each register.  IPA v5.0+ supports more than
that though; these changes prepare the code for that.

Beyond that, the IPA fields that represent endpoints in a 32-bit
bitmask are updated to support an arbitrary number of these endpoint
registers.  (There is one exception, explained in patch 7.)

The first two patches are some sort of unrelated cleanups, making
use of a helper function introduced recently.

The third and fourth use parameterized functions to determine the
register offset for registers that represent endpoints.

The last five convert fields representing endpoints to allow more
than 32 endpoints to be represented.

Since v1, I have implemented Jakub's suggestions:
  - Don't print a message on (bitmap) memory allocation failure
  - Do not do "mass null checks" when allocating bitmaps
  - Rework some code to ensure error path is sane
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      95ec6bce
    • Alex Elder's avatar
      net: ipa: use a bitmap for enabled endpoints · 9b7a0065
      Alex Elder authored 
      

Replace the 32-bit unsigned used to track enabled endpoints with a
Linux bitmap, to allow an arbitrary number of endpoints to be
represented.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b7a0065
    • Alex Elder's avatar
      net: ipa: use a bitmap for set-up endpoints · ae5108e9
      Alex Elder authored 
      

Replace the 32-bit unsigned used to track endpoints that have
completed setup with a Linux bitmap, to allow an arbitrary number
of endpoints to be represented.

Rework the error handling in ipa_endpoint_init() so the defined
endpoint bitmap is freed if an error occurs early.  Once endpoints
have been initialized, ipa_endpoint_exit() is used to recover if
the set of filtered endpoints is invalid.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ae5108e9
    • Alex Elder's avatar
      net: ipa: support more filtering endpoints · 0f97fbd4
      Alex Elder authored 
      

Prior to IPA v5.0, there could be no more than 32 endpoints.

A filter table begins with a bitmap indicating which endpoints have
a filter defined.  That bitmap is currently assumed to fit in a
32-bit value.

Starting with IPA v5.0, more than 32 endpoints are supported, so
it's conceivable that a TX endpoint has an ID that exceeds 32.
Increase the size of the field representing endpoints that support
filtering to 64 bits.  Rename the bitmap field "filtered".

Unlike other similar fields, we do not use an (arbitrarily long)
Linux bitmap for this purpose.  The reason is that if a filter table
ever *did* need to support more than 64 TX endpoints, its format
would change in ways we can't anticipate.

Have ipa_endpoint_init() return a negative errno rather than a mask
that indicates which endpoints support filtering, and have that
function assign the "filtered" field directly.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0f97fbd4
    • Alex Elder's avatar
      net: ipa: use a bitmap for available endpoints · 88de7672
      Alex Elder authored 
      

Similar to the previous patch, replace the 32-bit unsigned used to
track endpoints supported by hardware with a Linux bitmap, to allow
an arbitrary number of endpoints to be represented.

Move ipa_endpoint_deconfig() above ipa_endpoint_config() and use
it in the error path of the latter function.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      88de7672
    • Alex Elder's avatar
      net: ipa: use a bitmap for defined endpoints · 9a9f5129
      Alex Elder authored 
      

IPA v5.0 supports more than 32 endpoints, so we will be unable to
represent endpoints defined in the configuration data with a 32-bit
value.  To prepare for that, convert the field in the IPA structure
representing defined endpoints to be a Linux bitmap.

Convert loops based on that field into for_each_set_bit() calls over
the new bitmap.  Note that the loop in ipa_endpoint_config() still
assumes there are 32 or fewer endpoints (when comparing against the
available endpoint bit mask); that assumption goes away in the next
patch.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a9f5129
    • Alex Elder's avatar
      net: ipa: add a parameter to suspend registers · f298ba78
      Alex Elder authored 
      

The SUSPEND_INFO, SUSPEND_EN, SUSPEND_CLR registers represent
endpoint IDs in a bit mask.  When more than 32 endpoints are
supported, these registers will be replicated as needed to represent
the number of supported endpoints.  Update the definitions of these
registers to have a stride of 4 bytes, and update the code that
operates them to select the proper offset and bit.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f298ba78
    • Alex Elder's avatar
      net: ipa: add a parameter to aggregation registers · 1d8f16db
      Alex Elder authored 
      

Starting with IPA v5.0, a single IPA instance can have more than 32
endpoints defined.  To handle this, each register that holds a
bitmap of IPA endpoints is replicated as needed to represent the
available endpoints.

To prepare for this, registers that represent endpoint IDs in a bit
mask will be defined to have a parameter, with a stride value of 4
bytes.  The first 32 endpoints are represented in the first 32-bit
register, then the next (up to) 32 endpoints at an offset 4 bytes
higher.  When accessing such a register, the endpoint ID divided
by 32 determines the offset, and the endpoint ID modulo 32 defines
the endpoint's bit position within the register.

The first two registers we'll update for this are STATE_AGGR_ACTIVE
and AGGR_FORCE_CLOSE.

Until more than 32 endpoints are supported, this change has no
practical effect.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d8f16db
    • Alex Elder's avatar
      net: ipa: use ipa_table_mem() in ipa_table_reset_add() · 6337b147
      Alex Elder authored 
      

Similar to the previous commit, pass flags rather than a memory
region ID to ipa_table_reset_add(), and there use ipa_table_mem() to
look up the memory region affected based on those flags.

Currently all eight of these table memory regions are assumed to
exist, because they all have canaries within them.  Stop assuming
that will always be the case, and in ipa_table_reset_add() allow
these memory regions to be non-existent.

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6337b147
    • Alex Elder's avatar
      net: ipa: reduce arguments to ipa_table_init_add() · 5cb76899
      Alex Elder authored 
      

Recently ipa_table_mem() was added as a way to look up one of 8
possible memory regions by indicating whether it was a filter or
route table, hashed or not, and IPv6 or not.

We can simplify the interface to ipa_table_init_add() by passing two
flags to it instead of the opcode and both hashed and non-hashed
memory region IDs.  The "filter" and "ipv6" flags are sufficient to
determine the opcode to use, and with ipa_table_mem() can look up
the correct memory region as well.

It's possible to not have hashed tables, but we already verify the
number of entries in a filter or routing table is nonzero.  Stop
assuming a hashed table entry exists in ipa_table_init_add().

Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5cb76899
    • Colin Ian King's avatar
      rds: remove redundant variable total_payload_len · d28c0e73
      Colin Ian King authored 
      

Variable total_payload_len is being used to accumulate payload lengths
however it is never read or used afterwards. It is redundant and can
be removed.

Signed-off-by: default avatarColin Ian King <colin.i.king@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d28c0e73
    • Jakub Kicinski's avatar
      Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue · b3809277
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-02 (i40e, iavf)

This series contains updates to i40e and iavf drivers.

Joe Damato adds tracepoint information to i40e_napi_poll to expose helpful
debug information for users who'd like to get a better understanding of
how their NIC is performing as they adjust various parameters and tuning
knobs.

Note: this does not touch any XDP related code paths. This
tracepoint will only work when not using XDP. Care has been taken to avoid
changing control flow in i40e_napi_poll with this change.

Alicja adds error messaging for unsupported duplex settings for i40e.

Ye Xingchen replaces use of __FUNCTION__ with __func__ for iavf.

Bartosz changes tense of device removal message to be more clear on the
action for iavf.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  iavf: Change information about device removal in dmesg
  iavf: Replace __FUNCTION__ with __func__
  i40e: Add appropriate error message logged for incorrect duplex setting
  i40e: Add i40e_napi_poll tracepoint
  i40e: Record number of RXes cleaned during NAPI
  i40e: Record number TXes cleaned during NAPI
  i40e: Store the irq number in i40e_q_vector
====================

Link: https://lore.kernel.org/r/20221102211011.2944983-1-anthony.l.nguyen@intel.com


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b3809277
    • Jakub Kicinski's avatar
      Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue · 20224838
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-11-02 (e1000e, e1000, igc)

This series contains updates to e1000e, e1000, and igc drivers.

For e1000e, Sasha adds a new board type to help distinguish platforms and
adds device id support for upcoming platforms. He also adds trace points
for CSME flows to aid in debugging.

Ani removes unnecessary kmap_atomic call for e1000 and e1000e.

Muhammad sets speed based transmit offsets for launchtime functionality to
reduce latency for igc.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igc: Correct the launchtime offset
  e1000: Remove unnecessary use of kmap_atomic()
  e1000e: Remove unnecessary use of kmap_atomic()
  e1000e: Add e1000e trace module
  e1000e: Add support for the next LOM generation
  e1000e: Separate MTP board type from ADP
====================

Link: https://lore.kernel.org/r/20221102203957.2944396-1-anthony.l.nguyen@intel.com


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      20224838
    • Nathan Chancellor's avatar
      hamradio: baycom_epp: Fix return type of baycom_send_packet() · c5733e5b
      Nathan Chancellor authored 
      With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/net/hamradio/baycom_epp.c:1119:25: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit      = baycom_send_packet,
                                ^~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of baycom_send_packet()
to match the prototype's to resolve the warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750


Signed-off-by: default avatarNathan Chancellor <nathan@kernel.org>
Reviewed-by: default avatarKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160610.1186145-1-nathan@kernel.org


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c5733e5b
    • Nathan Chancellor's avatar
      net: ethernet: ti: Fix return type of netcp_ndo_start_xmit() · 63fe6ff6
      Nathan Chancellor authored 
      With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

  drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
          .ndo_start_xmit         = netcp_ndo_start_xmit,
                                    ^~~~~~~~~~~~~~~~~~~~
  1 error generated.

->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
netcp_ndo_start_xmit() to match the prototype's to resolve the warning
and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750


Signed-off-by: default avatarNathan Chancellor <nathan@kernel.org>
Reviewed-by: default avatarKees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102160933.1601260-1-nathan@kernel.org


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      63fe6ff6
    • Christophe JAILLET's avatar
      net: usb: Use kstrtobool() instead of strtobool() · c2cce3a6
      Christophe JAILLET authored 
      

strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.

In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.

While at it, include the corresponding header file (<linux/kstrtox.h>).

Signed-off-by: default avatarChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d4432a67b6f769cac0a9ec910ac725298b64e102.1667336095.git.christophe.jaillet@wanadoo.fr


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c2cce3a6
    • Jakub Kicinski's avatar
      Merge branch 'net-fix-netdev-to-devlink_port-linkage-and-expose-to-user' · 7712b3e9
      Jakub Kicinski authored 
      Jiri Pirko says:

====================
net: fix netdev to devlink_port linkage and expose to user

Currently, the info about linkage from netdev to the related
devlink_port instance is done using ndo_get_devlink_port().
This is not sufficient, as it is up to the driver to implement it and
some of them don't do that. Also it leads to a lot of unnecessary
boilerplate code in all the drivers.

Instead of that, introduce a possibility for driver to expose this
relationship by new SET_NETDEV_DEVLINK_PORT macro which stores it into
dev->devlink_port. It is ensured by the driver init/fini flows that
the devlink_port pointer does not change during the netdev lifetime.
Devlink port is always registered before netdev register and
unregistered after netdev unregister.

Benefit from this linkage setup and remove explicit calls from driver
to devlink_port_type_eth_set() and clear(). Many of the driver
didn't use it correctly anyway. Let the devlink.c to track associated
netdev events and adjust type and type pointer accordingly. Also
use this events to to keep track on ifname change and remove RTNL lock
taking from devlink_nl_port_fill().

Finally, remove the ndo_get_devlink_port() ndo which is no longer used
and expose devlink_port handle as a new netdev netlink attribute to the
user. That way, during the ifname->devlink_port lookup, userspace app
does not have to dump whole devlink port list and instead it can just
do a simple RTM_GETLINK query.
====================

Link: https://lore.kernel.org/r/20221102160211.662752-1-jiri@resnulli.us


Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      7712b3e9