- Apr 13, 2022
-
-
Nikolay Aleksandrov authored
Add support for fdb flush filtering based on ndm flags and state. NDM state and flags are mapped to bridge-specific flags and matched according to the specified masks. NTF_USE is used to represent added_by_user flag since it sets it on fdb add and we don't have a 1:1 mapping for it. Only allowed bits can be set, NTF_SELF and NTF_MASTER are ignored. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add ndm flags/state masks which will be used for bulk delete filtering. All of these are used by the bridge and vxlan drivers. Also minimal attr policy validation is added, it is up to ndo_fdb_del_bulk implementers to further validate them. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add the ability to specify exactly which fdbs to be flushed. They are described by a new structure - net_bridge_fdb_flush_desc. Currently it can match on port/bridge ifindex, vlan id and fdb flags. It is used to describe the existing dynamic fdb flush operation. Note that this flush operation doesn't treat permanent entries in a special way (fdb_delete vs fdb_delete_local), it will delete them regardless if any port is using them, so currently it can't directly replace deletes which need to handle that case, although we can extend it later for that too. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add a minimal ndo_fdb_del_bulk implementation which flushes all entries. Support for more fine-grained filtering will be added in the following patches. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
When NLM_F_BULK is specified in a fdb del message we need to handle it differently. First since this is a new call we can strictly validate the passed attributes, at first only ifindex and vlan are allowed as these will be the initially supported filter attributes, any other attribute is rejected. The mac address is no longer mandatory, but we use it to error out in older kernels because it cannot be specified with bulk request (the attribute is not allowed) and then we have to dispatch the call to ndo_fdb_del_bulk if the device supports it. The del bulk callback can do further validation of the attributes if necessary. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add a new netdev op called ndo_fdb_del_bulk, it will be later used for driver-specific bulk delete implementation dispatched from rtnetlink. The first user will be the bridge, we need it to signal to rtnetlink from the driver that we support bulk delete operation (NLM_F_BULK). Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add a new rtnl flag (RTNL_FLAG_BULK_DEL_SUPPORTED) which is used to verify that the delete operation allows bulk object deletion. Also emit a warning if anyone tries to set it for non-delete kind. Suggested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add a new delete request modifier called NLM_F_BULK which, when supported, would cause the request to delete multiple objects. The flag is a convenient way to signal that a multiple delete operation is requested which can be gradually added to different delete requests. In order to make sure older kernels will error out if the operation is not supported instead of doing something unintended we have to break a required condition when implementing support for this flag, f.e. for neighbors we will omit the mandatory mac address attribute. Initially it will be used to add flush with filtering support for bridge fdbs, but it also opens the door to add similar support to others. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Use BIT to define flag values. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add a helper which extracts the msg type's kind using the kind mask (0x3). Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
Add rtnl kind names instead of using raw values. We'll need to check for DEL kind later to validate bulk flag support. Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: enable bc/mc storm prevention support This series first adds supports for the ALE feature to rate limit number ingress broadcast(BC)/multicast(MC) packets per/sec which main purpose is BC/MC storm prevention. And then enables corresponding support for ingress broadcast(BC)/multicast(MC) packets rate limiting for TI CPSW switchdev and AM65x/J221E CPSW_NUSS drivers by implementing HW offload for simple tc-flower with policer action with matches on dst_mac/mask: - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate limiting (exact match) - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC packets rate limiting The CPSW supports MC/BC packets rate limiting in packets/sec and affects all ingress MC/BC packets and serves as BC/MC storm prevention feature. Examples: - BC rate limit to 1000pps: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \ action police pkts_rate 1000 pkts_burst 1 drop - MC rate limit to 20000pps: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \ action police rate pkts_rate 20000 pkts_burst 1 drop pkts_burst - not used. The solution inspired patch from Vladimir Oltean [1]. Changes in v3: - comments applied - policer validation added Changes in v2: - switch to packet-per-second policing introduced by commit 2ffe0395 ("net/sched: act_police: add support for packet-per-second policing") [2] v2: https://patchwork.kernel.org/project/netdevbpf/cover/20211101170122.19160-1-grygorii.strashko@ti.com/ v1: https://patchwork.kernel.org/project/netdevbpf/cover/20201114035654.32658-1-grygorii.strashko@ti.com/ [1] https://lore.kernel.org/patchwork/patch/1217254/ [2] https://patchwork.kernel.org/project/netdevbpf/cover/20210312140831.23346-1-simon.horman@netronome.com/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
This patch enables support for ingress broadcast(BC)/multicast(MC) packets rate limiting in TI CPSW switchdev driver (the corresponding ALE support was added in previous patch) by implementing HW offload for simple tc-flower with policer action with matches on dst_mac: - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate limiting (exact match) - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC packets rate limiting The CPSW supports MC/BC packets rate limiting in packets/sec and affects all ingress MC/BC packets and serves as BC/MC storm prevention feature. Examples: - BC rate limit to 1000pps: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \ action police pkts_rate 1000 pkts_burst 1 drop - MC rate limit to 20000pps: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \ action police rate pkts_rate 10000 pkts_burst 1 drop pkts_burst - not used. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
This patch enables support for ingress broadcast(BC)/multicast(MC) packets rate limiting in TI AM65x CPSW driver (the corresponding ALE support was added in previous patch) by implementing HW offload for simple tc-flower with policer action with matches on dst_mac/mask: - ff:ff:ff:ff:ff:ff/ff:ff:ff:ff:ff:ff has to be used for BC packets rate limiting (exact match) - 01:00:00:00:00:00/01:00:00:00:00:00 fixed value has to be used for MC packets rate limiting The CPSW supports MC/BC packets rate limiting in packets/sec and affects all ingress MC/BC packets and serves as BC/MC storm prevention feature. Examples: - BC rate limit to 1000pps: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress flower skip_sw dst_mac ff:ff:ff:ff:ff:ff \ action police pkts_rate 1000 pkts_burst 1 drop - MC rate limit to 20000pps: tc qdisc add dev eth0 clsact tc filter add dev eth0 ingress flower skip_sw dst_mac 01:00:00:00:00:00/01:00:00:00:00:00 \ action police rate pkts_rate 20000 pkts_burst 1 drop pkts_burst - not used. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The CPSW ALE supports feature to rate limit number ingress broadcast(BC)/multicast(MC) packets per/sec which main purpose is BC/MC storm prevention. The ALE BC/MC packet rate limit configuration consist of two parts: - global ALE_CONTROL.ENABLE_RATE_LIMIT bit 0 which enables rate limiting globally ALE_PRESCALE.PRESCALE specifies rate limiting interval - per-port ALE_PORTCTLx.BCASTMCAST/_LIMIT specifies number of BC/MC packets allowed per rate limiting interval. When port.BCASTMCAST/_LIMIT is 0 rate limiting is disabled for Port. When BC/MC packet rate limiting is enabled the number of allowed packets per/sec is defined as: number_of_packets/sec = (Fclk / ALE_PRESCALE) * port.BCASTMCAST/_LIMIT Hence, the ALE_PRESCALE configuration is common for all ports the 1ms interval is selected and configured during ALE initialization while port.BCAST/MCAST_LIMIT are configured per-port. This allows to achieve: - min number_of_packets = 1000 when port.BCAST/MCAST_LIMIT = 1 - max number_of_packets = 1000 * 255 = 255000 when port.BCAST/MCAST_LIMIT = 0xFF The ALE_CONTROL.ENABLE_RATE_LIMIT can also be enabled once during ALE initialization as rate limiting enabled by non zero port.BCASTMCAST/_LIMIT values. This patch implements above logic in ALE and adds new ALE APIs cpsw_ale_rx_ratelimit_bc(); cpsw_ale_rx_ratelimit_mc(); Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King (Oracle) authored
As there are now no users of phylink_helper_basex_speed(), we can remove this obsolete functionality. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The __mtk_foe_entry_clear() function frees "entry" so we have to use the _safe() version of hlist_for_each_entry() to prevent a use after free. Fixes: 33fc42de ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Minghao Chi authored
Using pm_runtime_resume_and_get is more appropriate for simplifing code Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lin Ma authored
Commit 3e3b5dfc ("NFC: reorder the logic in nfc_{un,}register_device") assumes the device_is_registered() in function nfc_dev_up() will help to check when the rfkill is unregistered. However, this check only take effect when device_del(&dev->dev) is done in nfc_unregister_device(). Hence, the rfkill object is still possible be dereferenced. The crash trace in latest kernel (5.18-rc2): [ 68.760105] ================================================================== [ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750 [ 68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313 [ 68.760756] [ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4 [ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 68.760756] Call Trace: [ 68.760756] <TASK> [ 68.760756] dump_stack_lvl+0x57/0x7d [ 68.760756] print_report.cold+0x5e/0x5db [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] kasan_report+0xbe/0x1c0 [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] __lock_acquire+0x3ec1/0x6750 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? register_lock_class+0x18d0/0x18d0 [ 68.760756] lock_acquire+0x1ac/0x4f0 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0 [ 68.760756] ? nla_get_range_signed+0x540/0x540 [ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 68.760756] _raw_spin_lock_irqsave+0x39/0x50 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] rfkill_blocked+0xe/0x60 [ 68.760756] nfc_dev_up+0x84/0x260 [ 68.760756] nfc_genl_dev_up+0x90/0xe0 [ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230 [ 68.760756] ? security_capable+0x51/0x90 [ 68.760756] genl_rcv_msg+0x280/0x500 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? lock_acquire+0x1ac/0x4f0 [ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] netlink_rcv_skb+0x11b/0x340 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? netlink_ack+0x9c0/0x9c0 [ 68.760756] ? netlink_deliver_tap+0x136/0xb00 [ 68.760756] genl_rcv+0x1f/0x30 [ 68.760756] netlink_unicast+0x430/0x710 [ 68.760756] ? memset+0x20/0x40 [ 68.760756] ? netlink_attachskb+0x740/0x740 [ 68.760756] ? __build_skb_around+0x1f4/0x2a0 [ 68.760756] netlink_sendmsg+0x75d/0xc00 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] sock_sendmsg+0xdf/0x110 [ 68.760756] __sys_sendto+0x19e/0x270 [ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0 [ 68.760756] ? fd_install+0x178/0x4c0 [ 68.760756] ? fd_install+0x195/0x4c0 [ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 68.760756] __x64_sys_sendto+0xd8/0x1b0 [ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130 [ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] RIP: 0033:0x7f67fb50e6b3 ... [ 68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3 [ 68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003 [ 68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c [ 68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e [ 68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003 [ 68.760756] </TASK> [ 68.760756] [ 68.760756] Allocated by task 279: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] __kasan_kmalloc+0x81/0xa0 [ 68.760756] rfkill_alloc+0x7f/0x280 [ 68.760756] nfc_register_device+0xa3/0x1a0 [ 68.760756] nci_register_device+0x77a/0xad0 [ 68.760756] nfcmrvl_nci_register_dev+0x20b/0x2c0 [ 68.760756] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 68.760756] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 68.760756] tty_ioctl+0x764/0x1310 [ 68.760756] __x64_sys_ioctl+0x122/0x190 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] [ 68.760756] Freed by task 314: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] kasan_set_track+0x21/0x30 [ 68.760756] kasan_set_free_info+0x20/0x30 [ 68.760756] __kasan_slab_free+0x108/0x170 [ 68.760756] kfree+0xb0/0x330 [ 68.760756] device_release+0x96/0x200 [ 68.760756] kobject_put+0xf9/0x1d0 [ 68.760756] nfc_unregister_device+0x77/0x190 [ 68.760756] nfcmrvl_nci_unregister_dev+0x88/0xd0 [ 68.760756] nci_uart_tty_close+0xdf/0x180 [ 68.760756] tty_ldisc_kill+0x73/0x110 [ 68.760756] tty_ldisc_hangup+0x281/0x5b0 [ 68.760756] __tty_hangup.part.0+0x431/0x890 [ 68.760756] tty_release+0x3a8/0xc80 [ 68.760756] __fput+0x1f0/0x8c0 [ 68.760756] task_work_run+0xc9/0x170 [ 68.760756] exit_to_user_mode_prepare+0x194/0x1a0 [ 68.760756] syscall_exit_to_user_mode+0x19/0x50 [ 68.760756] do_syscall_64+0x48/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae This patch just add the null out of dev->rfkill to make sure such dereference cannot happen. This is safe since the device_lock() already protect the check/write from data race. Fixes: 3e3b5dfc ("NFC: reorder the logic in nfc_{un,}register_device") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guo Zhengkui authored
Address the following coccicheck warning: net/ipv6/exthdrs.c:620:44-45: WARNING opportunity for swap() by using swap() for the swapping of variable values and drop the tmp (`addr`) variable that is not needed any more. Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alaa Mohamed authored
Add boilerplate test loop in test to run all tests in fib_rule_tests.sh Signed-off-by:
Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Rely on standard cci-control-port property to identify CCI port reference. Update mt7622 dts binding. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-04-12 This series contains updates to i40e and ice drivers. Joe Damato adds TSO support for MPLS packets on i40e and ice drivers. He also adds tracking and reporting of tx_stopped statistic for i40e. Nabil S. Alramli adds reporting of tx_restart to ethtool for i40e. Mateusz adds new device id support for i40e. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== tls: rx: random refactoring part 3 TLS Rx refactoring. Part 3 of 3. This set is mostly around rx_list and async processing. The last two patches are minor optimizations. A couple of features to follow. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
TLS 1.3 and ChaChaPoly don't carry IV in the packet. The code before this change would copy out iv_size worth of whatever followed the TLS header in the packet and then for TLS 1.3 | ChaCha overwrite that with the sequence number. Waste of cycles especially with TLS 1.2 being close to dead and TLS 1.3 being the common case. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
IVs are 8 or 16 bytes, no point reading out the exact value for quantities this small. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Propagating EINPROGRESS thru multiple layers of functions is error prone. Use darg->async as an in/out argument, like we use darg->zc today. On input it tells the code if async is allowed, on output if it took place. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
async crypto handler will report the socket error no need to report it again. We can, however, let the data we already copied be reported to user space but we need to make sure the error will be reported next time around. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
process_rx_list() only fails if it can't copy data to user space. There is no point recording the error onto sk->sk_err or giving up on the data which was read partially. Treat the return value like a normal socket partial read. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
If crypto didn't always invoke our callback for async we'd not be clearing skb->sk and would crash in the skb core when freeing it. This if must be dead code. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Async crypto never worked with TLS 1.3 and was explicitly disabled in commit 8497ded2 ("net/tls: Disable async decrytion for tls1.3"). There's no need for us to handle TLS 1.3 padding in the async cb. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Move counting TlsDecryptErrors to tls_do_decryption() where differences between sync and async crypto are reconciled. No functional changes, this code just always gave me a pause. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The code is identical, we can save a few LoC. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
rx_list is protected by the socket lock, no need to take the built-in spin lock on accesses. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lv Ruyi authored
platform_get_irq() return negative value on failure, so null check of return value is incorrect. Fix it by comparing whether it is less than zero. Fixes: 9055a2f5 ("ixp4xx_eth: make ptp support a platform driver") Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220412085126.2532924-1-lv.ruyi@zte.com.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Minghao Chi authored
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle. This change is just to simplify the code, no actual functional changes. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20220412082847.2532584-1-chi.minghao@zte.com.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Coco Li authored
XRFM is no longer needed for configuring FOU tunnels (CONFIG_NET_FOU_IP_TUNNELS), remove from Kconfig. Also remove the xrfm.h dependency in fou.c. It was added in '23461551 ("fou: Support for foo-over-udp RX path")' for depencies of udp_del_offload and udp_offloads, which were removed in 'd92283e3 ("fou: change to use UDP socket GRO")'. Built and installed kernel and setup GUE/FOU tunnels. Signed-off-by:
Coco Li <lixiaoyan@google.com> Link: https://lore.kernel.org/r/20220411213717.3688789-1-lixiaoyan@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Mateusz Palczewski authored
Add support for Ethernet Connection X722 for 10GbE SFP+ cards. Make possible for the driver to bind to the card. Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Nabil S. Alramli authored
Add vsi.tx_restart to the i40e driver ethtool statistics Signed-off-by:
Nabil S. Alramli <dev@nalramli.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Joe Damato authored
Track TX queue stop events and export the new stat with ethtool. Signed-off-by:
Joe Damato <jdamato@fastly.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-