- Dec 08, 2023
-
-
Hou Tao authored
[ Upstream commit 75a44258 ] bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no free object in free list, but it doesn't initialize the allocation hint for the returned pointer. It may lead to bad memory dereference when freeing the pointer, so fix it by initializing the allocation hint. Fixes: 822fb26b ("bpf: Add a hint to allocated objects.") Signed-off-by: Hou Tao <houtao1@huawei.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20231111043821.2258513-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ioana Ciornei authored
[ Upstream commit beb1930f ] The blamed commit added support for Rx copybreak. This meant that for certain frame sizes, a new skb was allocated and the initial data buffer was recycled. Instead of waiting to recycle the Rx buffer only after all processing was done on it (like accessing the parse results or timestamp information), the code path just went ahead and re-used the buffer right away. This sometimes lead to corrupted HW and SW annotation areas. Fix this by delaying the moment when the buffer is recycled. Fixes: 50f82699 ("dpaa2-eth: add rx copybreak support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ioana Ciornei authored
[ Upstream commit f422abe3 ] Increase the needed headroom to account for a 64 byte alignment restriction which, with this patch, we make mandatory on the Tx path. The case in which the amount of headroom needed is not available is already handled by the driver which instead sends a S/G frame with the first buffer only holding the SW and HW annotation areas. Without this patch, we can empirically see data corruption happening between Tx and Tx confirmation which sometimes leads to the SW annotation area being overwritten. Since this is an old IP where the hardware team cannot help to understand the underlying behavior, we make the Tx alignment mandatory for all frames to avoid the crash on Tx conf. Also, remove the comment that suggested that this is just an optimization. This patch also sets the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address Fixes: 6e2387e8 ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/ Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Greg Ungerer authored
[ Upstream commit a524eabc ] As of commit b92143d4 ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4 ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Greg Ungerer authored
[ Upstream commit b3f1a164 ] As of commit de5c9bf4 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Oldřich Jedlička authored
[ Upstream commit 3e3a2b64 ] This fixes WARN_ONs when using AP_VLANs after station removal. The flush call passed AP_VLAN vif to driver, but because these vifs are virtual and not registered with drivers, we need to translate to the correct AP vif first. Closes: https://github.com/openwrt/openwrt/issues/12420 Fixes: 0b75a1b1 ("wifi: mac80211: flush queues on STA removal") Fixes: d00800a2 ("wifi: mac80211: add flush_sta method") Tested-by: Konstantin Demin <rockdrilla@gmail.com> Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com> Link: https://lore.kernel.org/r/20231104141333.3710-1-oldium.pro@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 71b5e406 ] This error path should return -EINVAL instead of success. Fixes: 57974a55 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zhengchao Shao authored
[ Upstream commit e2b706c6 ] When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: <TASK> igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) </TASK> The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yoshihiro Shimoda authored
[ Upstream commit 782486af ] Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yoshihiro Shimoda authored
[ Upstream commit 1aaef863 ] This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yoshihiro Shimoda authored
[ Upstream commit 109b25d1 ] The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Stanislav Fomichev authored
[ Upstream commit c0c6bde5 ] Commit 2b3486bc ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc ("bpf: Introduce device-bound XDP programs") Reported-by: <syzbot+44c2416196b7c607f226@syzkaller.appspotmail.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Dipendra Khadka <kdipendra88@gmail.com> Link: https://lore.kernel.org/bpf/20231114045453.1816995-2-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 5d33213f ] The problem is this line here from subdev_do_ioctl(). client_cap->capabilities &= ~V4L2_SUBDEV_CLIENT_CAP_STREAMS; The "client_cap->capabilities" variable is a u64. The AND operation is supposed to clear out the V4L2_SUBDEV_CLIENT_CAP_STREAMS flag. But because it's a 32 bit variable it accidentally clears out the high 32 bits as well. Currently we only use the first bit and none of the upper bits so this doesn't affect runtime behavior. Fixes: f57fa295 ("media: v4l2-subdev: Add new ioctl for client capabilities") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Antonio Borneo authored
[ Upstream commit edd48fd9 ] The existing code does not verify if the "tentative" index exceeds the size of the array, causing out of bound read. Issue identified with kasan. Check the index before using it. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Fixes: 32c170ff ("pinctrl: stm32: set default gpio line names using pin names") Link: https://lore.kernel.org/r/20231107110520.4449-1-antonio.borneo@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
倪琛 authored
[ Upstream commit b0eeba52 ] Add check for the return value of devm_kcalloc() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: 32c170ff ("pinctrl: stm32: set default gpio line names using pin names") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20231031080807.3600656-1-nichen@iscas.ac.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
commit 7e7efdda upstream. My prior race fix here broke CQM when ranges aren't used, as the reporting worker now requires the cqm_config to be set in the wdev, but isn't set when there's no range configured. Rather than continuing to special-case the range version, set the cqm_config always and configure accordingly, also tracking if range was used or not to be able to clear the configuration appropriately with the same API, which was actually not right if both were implemented by a driver for some reason, as is the case with mac80211 (though there the implementations are equivalent so it doesn't matter.) Also, the original multiple-RSSI commit lost checking for the callback, so might have potentially crashed if a driver had neither implementation, and userspace tried to use it despite not being advertised as supported. Cc: stable@vger.kernel.org Fixes: 4a4b8169 ("cfg80211: Accept multiple RSSI thresholds for CQM") Fixes: 37c20b2e ("wifi: cfg80211: fix cqm_config access race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit b10b73c1 upstream. Right now we stash any potentially mmap'ed provided ring buffer range for freeing at release time, regardless of when they get unregistered. Since we're keeping track of these ranges anyway, keep track of their registration state as well, and use that to recycle ranges when appropriate rather than always allocate new ones. The lookup is a basic scan of entries, checking for the best matching free entry. Fixes: c392cbec ("io_uring/kbuf: defer release of mapped buffer rings") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit c392cbec upstream. If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the kernel allocates the memory for it and the application is expected to mmap(2) this memory. However, io_uring uses remap_pfn_range() for this operation, so we cannot rely on normal munmap/release on freeing them for us. Stash an io_buf_free entry away for each of these, if any, and provide a helper to free them post ->release(). Cc: stable@vger.kernel.org Fixes: c56e022c ("io_uring: add support for user mapped provided buffer ring") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit edecf168 upstream. In preparation for using these helpers, make them non-static and add them to our internal header. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Sterba authored
commit 5de0434b upstream. When the send protocol versioning was added in 5.16 e77fbf99 ("btrfs: send: prepare for v2 protocol"), the 32/64bit compat code was not updated (added by 2351f431 ("btrfs: fix send ioctl on 32bit with 64bit kernel")), missing the version struct member. The compat code is probably rarely used, nobody reported any bugs. Found by tool https://github.com/jirislaby/clang-struct . Fixes: e77fbf99 ("btrfs: send: prepare for v2 protocol") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 94dbf7c0 upstream. [BUG] If btrfs_alloc_page_array() fail to allocate all pages but part of the slots, then the partially allocated pages would be leaked in function btrfs_submit_compressed_read(). [CAUSE] As explicitly stated, if btrfs_alloc_page_array() returned -ENOMEM, caller is responsible to free the partially allocated pages. For the existing call sites, most of them are fine: - btrfs_raid_bio::stripe_pages Handled by free_raid_bio(). - extent_buffer::pages[] Handled btrfs_release_extent_buffer_pages(). - scrub_stripe::pages[] Handled by release_scrub_stripe(). But there is one exception in btrfs_submit_compressed_read(), if btrfs_alloc_page_array() failed, we didn't cleanup the array and freed the array pointer directly. Initially there is still the error handling in commit dd137dd1 ("btrfs: factor out allocating an array of pages"), but later in commit 544fe4a9 ("btrfs: embed a btrfs_bio into struct compressed_bio"), the error handling is removed, leading to the possible memory leak. [FIX] This patch would add back the error handling first, then to prevent such situation from happening again, also Make btrfs_alloc_page_array() to free the allocated pages as a extra safety net, then we don't need to add the error handling to btrfs_submit_compressed_read(). Fixes: 544fe4a9 ("btrfs: embed a btrfs_bio into struct compressed_bio") CC: stable@vger.kernel.org # 6.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 7d410d5e upstream. When getting a chunk map, at btrfs_get_chunk_map(), we do some sanity checks to verify we found a chunk map and that map found covers the logical address the caller passed in. However the messages aren't very clear in the sense that don't mention the issue is with a chunk map and one of them prints the 'length' argument as if it were the end offset of the requested range (while the in the string format we use %llu-%llu which suggests a range, and the second %llu-%llu is actually a range for the chunk map). So improve these two details in the error messages. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
commit 0ac1d13a upstream. kernel_write() requires the caller to ensure that the file is writable. Let's do that directly after looking up the ->send_fd. We don't need a separate bailout path because the "out" path already does fput() if ->send_filp is non-NULL. This has no security impact for two reasons: - the ioctl requires CAP_SYS_ADMIN - __kernel_write() bails out on read-only files - but only since 5.8, see commit a01ac27b ("fs: check FMODE_WRITE in __kernel_write") Reported-and-tested-by: <syzbot+12e098239d20385264d3@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=12e098239d20385264d3 Fixes: 31db9f7c ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 5fba5a57 upstream. At btrfs_get_chunk_map() we get the extent map for the chunk that contains the given logical address stored in the 'logical' argument. Then we do sanity checks to verify the extent map contains the logical address. One of these checks verifies if the extent map covers a range with an end offset behind the target logical address - however this check has an off-by-one error since it will consider an extent map whose start offset plus its length matches the target logical address as inclusive, while the fact is that the last byte it covers is behind the target logical address (by 1). So fix this condition by using '<=' rather than '<' when comparing the extent map's "start + length" against the target logical address. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bragatheswaran Manickavel authored
commit f91192cd upstream. In btrfs_ref_tree_mod(), when !parent 're' was allocated through kmalloc(). In the following code, if an error occurs, the execution will be redirected to 'out' or 'out_unlock' and the function will be exited. However, on some of the paths, 're' are not deallocated and may lead to memory leaks. For example: lookup_block_entry() for 'be' returns NULL, the out label will be invoked. During that flow ref and 'ra' are freed but not 're', which can potentially lead to a memory leak. CC: stable@vger.kernel.org # 5.10+ Reported-and-tested-by: <syzbot+d66de4cbf532749df35f@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=d66de4cbf532749df35f Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 2db31320 upstream. There is a feature request to add dmesg output when unmounting a btrfs. There are several alternative methods to do the same thing, but with their own problems: - Use eBPF to watch btrfs_put_super()/open_ctree() Not end user friendly, they have to dip their head into the source code. - Watch for directory /sys/fs/<uuid>/ This is way more simple, but still requires some simple device -> uuid lookups. And a script needs to use inotify to watch /sys/fs/. Compared to all these, directly outputting the information into dmesg would be the most simple one, with both device and UUID included. And since we're here, also add the output when mounting a filesystem for the first time for parity. A more fine grained monitoring of subvolume mounts should be done by another layer, like audit. Now mounting a btrfs with all default mkfs options would look like this: [81.906566] BTRFS info (device dm-8): first mount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2 [81.907494] BTRFS info (device dm-8): using crc32c (crc32c-intel) checksum algorithm [81.908258] BTRFS info (device dm-8): using free space tree [81.912644] BTRFS info (device dm-8): auto enabling async discard [81.913277] BTRFS info (device dm-8): checking UUID tree [91.668256] BTRFS info (device dm-8): last unmount of filesystem 633b5c16-afe3-4b79-b195-138fe145e4f2 CC: stable@vger.kernel.org # 5.4+ Link: https://github.com/kdave/btrfs-progs/issues/689 Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 33f806da upstream. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit c9fcb2b6 upstream. Make sure the .PARISC.unwind section will be 32-bit aligned. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 07eecff8 upstream. The jump_table stores two 32-bit words and one 32- (on 32-bit kernel) or one 64-bit word (on 64-bit kernel). Ensure that the last word is always 64-bit aligned on a 64-bit kernel by aligning the whole structure on sizeof(long). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit e5f3e299 upstream. Those return codes are only defined for the parisc architecture and are leftovers from when we wanted to be HP-UX compatible. They are not returned by any Linux kernel syscall but do trigger problems with the glibc strerrorname_np() and strerror() functions as reported in glibc issue #31080. There is no need to keep them, so simply remove them. Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: Bruno Haible <bruno@clisp.org> Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080 Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit b28fc0d8 upstream. On parisc we need 16-byte alignment for variables which are used for locking. Mark the __lock_aligned attribute acordingly so that the .data..lock_aligned section will get that alignment in the generated object files. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit fe76a134 upstream. Make sure that the __bug_table section gets 32- or 64-bit aligned, depending if a 32- or 64-bit kernel is being built. Mark it non-writeable and use .blockz instead of the .org assembler directive to pad the struct. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit a80aeb86 upstream. Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit e11d4ccc upstream. Add an align statement to tell the linker that all ex_table entries and as such the whole ex_table section should be 32-bit aligned in vmlinux and modules. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Timothy Pearson authored
commit 5e1d824f upstream. During floating point and vector save to thread data f0/vs0 are clobbered by the FPSCR/VSCR store routine. This has been obvserved to lead to userspace register corruption and application data corruption with io-uring. Fix it by restoring f0/vs0 after FPSCR/VSCR store has completed for all the FP, altivec, VMX register save paths. Tested under QEMU in kvm mode, running on a Talos II workstation with dual POWER9 DD2.2 CPUs. Additional detail (mpe): Typically save_fpu() is called from __giveup_fpu() which saves the FP regs and also *turns off FP* in the tasks MSR, meaning the kernel will reload the FP regs from the thread struct before letting the task use FP again. So in that case save_fpu() is free to clobber f0 because the FP regs no longer hold live values for the task. There is another case though, which is the path via: sys_clone() ... copy_process() dup_task_struct() arch_dup_task_struct() flush_all_to_thread() save_all() That path saves the FP regs but leaves them live. That's meant as an optimisation for a process that's using FP/VSX and then calls fork(), leaving the regs live means the parent process doesn't have to take a fault after the fork to get its FP regs back. The optimisation was added in commit 8792468d ("powerpc: Add the ability to save FPU without giving it up"). That path does clobber f0, but f0 is volatile across function calls, and typically programs reach copy_process() from userspace via a syscall wrapper function. So in normal usage f0 being clobbered across a syscall doesn't cause visible data corruption. But there is now a new path, because io-uring can call copy_process() via create_io_thread() from the signal handling path. That's OK if the signal is handled as part of syscall return, but it's not OK if the signal is handled due to some other interrupt. That path is: interrupt_return_srr_user() interrupt_exit_user_prepare() interrupt_exit_user_prepare_main() do_notify_resume() get_signal() task_work_run() create_worker_cb() create_io_worker() copy_process() dup_task_struct() arch_dup_task_struct() flush_all_to_thread() save_all() if (tsk->thread.regs->msr & MSR_FP) save_fpu() # f0 is clobbered and potentially live in userspace Note the above discussion applies equally to save_altivec(). Fixes: 8792468d ("powerpc: Add the ability to save FPU without giving it up") Cc: stable@vger.kernel.org # v4.6+ Closes: https://lore.kernel.org/all/480932026.45576726.1699374859845.JavaMail.zimbra@raptorengineeringinc.com/ Closes: https://lore.kernel.org/linuxppc-dev/480221078.47953493.1700206777956.JavaMail.zimbra@raptorengineeringinc.com/ Tested-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> [mpe: Reword change log to describe exact path of corruption & other minor tweaks] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/1921539696.48534988.1700407082933.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Piggin authored
commit dc158d23 upstream. Before running a guest, the host process (e.g., QEMU) FP/VEC registers are saved if they were being used, similarly to when the kernel uses FP registers. The guest values are then loaded into regs, and the host process registers will be restored lazily when it uses FP/VEC. KVM HV has a bug here: the host process registers do get saved, but the user MSR bits remain enabled, which indicates the registers are valid for the process. After they are clobbered by running the guest, this valid indication causes the host process to take on the FP/VEC register values of the guest. Fixes: 34e119c9 ("KVM: PPC: Book3S HV P9: Reduce mtmsrd instructions required to save host SPRs") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231122025811.2973-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Abdul Halim, Mohd Syazwan authored
commit 85b80fdf upstream. The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before switching address translation on or off and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translation(), waiting for the completion of TE transition. Add MTL to the quirk list for those devices and skips TE disabling if the qurik hits. Fixes: b1012ca8 ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") Cc: stable@vger.kernel.org Signed-off-by: Abdul Halim, Mohd Syazwan <mohd.syazwan.abdul.halim@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20231116022324.30120-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ritesh Harjani (IBM) authored
commit 8abc712e upstream. Commit "filemap: update ki_pos in generic_perform_write", made updating of ki_pos into common code in generic_perform_write() function. This also causes generic/091 to fail. This happened due to an in-flight collision with: fb5de435 ("ext2: Move direct-io to use iomap"). I have chosen fixes tag based on which commit got landed later to upstream kernel. Fixes: 182c25e9 ("filemap: update ki_pos in generic_perform_write") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <d595bee9f2475ed0e8a2e7fb94f7afc2c6ffc36a.1700643443.git.ritesh.list@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Markus Weippert authored
commit bb6cc253 upstream. Commit 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations") replaced IS_ERR_OR_NULL by IS_ERR. This leads to a NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000080 Call Trace: ? __die_body.cold+0x1a/0x1f ? page_fault_oops+0xd2/0x2b0 ? exc_page_fault+0x70/0x170 ? asm_exc_page_fault+0x22/0x30 ? btree_node_free+0xf/0x160 [bcache] ? up_write+0x32/0x60 btree_gc_coalesce+0x2aa/0x890 [bcache] ? bch_extent_bad+0x70/0x170 [bcache] btree_gc_recurse+0x130/0x390 [bcache] ? btree_gc_mark_node+0x72/0x230 [bcache] bch_btree_gc+0x5da/0x600 [bcache] ? cpuusage_read+0x10/0x10 ? bch_btree_gc+0x600/0x600 [bcache] bch_gc_thread+0x135/0x180 [bcache] The relevant code starts with: new_nodes[0] = NULL; for (i = 0; i < nodes; i++) { if (__bch_keylist_realloc(&keylist, bkey_u64s(&r[i].b->key))) goto out_nocoalesce; // ... out_nocoalesce: // ... for (i = 0; i < nodes; i++) if (!IS_ERR(new_nodes[i])) { // IS_ERR_OR_NULL before 028ddcac btree_node_free(new_nodes[i]); // new_nodes[0] is NULL rw_unlock(true, new_nodes[i]); } This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. Fixes: 028ddcac ("bcache: Remove unnecessary NULL point check in node allocations") Link: https://lore.kernel.org/all/3DF4A87A-2AC1-4893-AE5F-E921478419A9@suse.de/ Cc: stable@vger.kernel.org Cc: Zheng Wang <zyytlz.wz@163.com> Cc: Coly Li <colyli@suse.de> Signed-off-by: Markus Weippert <markus@gekmihesg.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Robin Murphy authored
commit a2e7e59a upstream. It turns out there are more subtle races beyond just the main part of __iommu_probe_device() itself running in parallel - the dev_iommu_free() on the way out of an unsuccessful probe can still manage to trip up concurrent accesses to a device's fwspec. Thus, extend the scope of iommu_probe_device_lock() to also serialise fwspec creation and initial retrieval. Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/ Fixes: 01657bc1 ("iommu: Avoid races around device probe") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Tested-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-