We'll need this for openat2(2) support, remove flags and mode from
the existing io_open struct.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

If an application is using eventfd notifications with poll to know when
new SQEs can be issued, it's expecting the following read/writes to
complete inline. And with that, it knows that there are events available,
and don't want spurious wakeups on the eventfd for those requests.

This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like
IORING_REGISTER_EVENTFD, except it only triggers notifications for events
that happen from async completions (IRQ, or io-wq worker completions).
Any completions inline from the submission itself will not trigger
notifications.

Suggested-by: Mark Papadakis <markuspapadakis@icloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for adding another one, which would make us spill into
another long (and hence bump the size of the ctx), change them to
bit fields.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

If an application attempts to register a set with unbounded requests
pending, we can be stuck here forever if they don't complete. We can
make this wait interruptible, and just abort if we get signaled.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Null check kfree is redundant, so remove it.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This adds IORING_OP_SEND for send(2) support, and IORING_OP_RECV for
recv(2) support.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_wq workers use io_issue_sqe() to forward sqes and never
io_queue_sqe(). Remove extra check for io_wq_current_is_worker()

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It should be pretty rare to not submitting anything when there is
something in the ring. No need to keep heuristics for this case.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A user may ask to submit more than there is in the ring, and then
io_uring will submit as much as it can. However, in the last iteration
it will allocate an io_kiocb and immediately free it. It could do
better and adjust @to_submit to what is in the ring.

And since the ring's head is already checked here, there is no need to
do it in the loop, spamming with smp_load_acquire()'s barriers

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Make io_submit_sqes() to clamp @to_submit itself. It removes duplicated
code and prepares for following changes.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Some applications like to start small in terms of ring size, and then
ramp up as needed. This is a bit tricky to do currently, since we don't
advertise the max ring size.

This adds IORING_SETUP_CLAMP. If set, and the values for SQ or CQ ring
size exceed what we support, then clamp them at the max values instead
of returning -EINVAL. Since we return the chosen ring sizes after setup,
no further changes are needed on the application side. io_uring already
changes the ring sizes if the application doesn't ask for power-of-two
sizes, for example.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently we only batch free if fixed files are used, no links, no aux
data, etc. This extends the batch freeing to only exclude the linked
case and fallback case, and make io_free_req_many() handle the other
cases just fine.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This cleans up the code a bit, and it allows us to build on top of the
multi-req freeing.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

percpu_ref_tryget() has its own overhead. Instead getting a reference
for each request, grab a bunch once per io_submit_sqes().

~5% throughput boost for a "submit and wait 128 nops" benchmark.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>

__io_req_free_empty() -> __io_req_do_free()

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add percpu_ref_tryget_many(), which works the same way as
percpu_ref_tryget(), but grabs specified number of refs.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This adds support for doing madvise(2) through io_uring. We assume that
any operation can block, and hence punt everything async. This could be
improved, but hard to make bullet proof. The async punt ensures it's
safe.

Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is in preparation for enabling this functionality through io_uring.
Add a helper that is just exporting what sys_madvise() does, and have the
system call use it.

No functional changes in this patch.

Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This adds support for doing fadvise through io_uring. We assume that
WILLNEED doesn't block, but that DONTNEED may block.

Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This behaves like preadv2/pwritev2 with offset == -1, it'll use (and
update) the current file position. This obviously comes with the caveat
that if the application has multiple read/writes in flight, then the
end result will not be as expected. This is similar to threads sharing
a file descriptor and doing IO using the current file position.

Since this feature isn't easily detectable by doing a read or write,
add a feature flags, IORING_FEAT_RW_CUR_POS, to allow applications to
detect presence of this feature.

Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For uses cases that don't already naturally have an iovec, it's easier
(or more convenient) to just use a buffer address + length. This is
particular true if the use case is from languages that want to create
a memory safe abstraction on top of io_uring, and where introducing
the need for the iovec may impose an ownership issue. For those cases,
they currently need an indirection buffer, which means allocating data
just for this purpose.

Add basic read/write that don't require the iovec.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

For busy IORING_OP_POLL_ADD workloads, we can have enough contention
on the completion lock that we fail the inline completion path quite
often as we fail the trylock on that lock. Add a list for deferred
completions that we can use in that case. This helps reduce the number
of async offloads we have to do, as if we get multiple completions in
a row, we'll piggy back on to the poll_llist instead of having to queue
our own offload.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently check ->cq_overflow_list from both SQ and CQ context, which
causes some bouncing of that cache line. Add separate bits of state for
this instead, so that the SQ side can check using its own state, and
likewise for the CQ side.

This adds ->sq_check_overflow with the SQ state, and ->cq_check_overflow
with the CQ state. If we hit an overflow condition, both of these bits
are set. Likewise for overflow flush clear, we clear both bits. For the
fast path of just checking if there's an overflow condition on either
the SQ or CQ side, we can use our own private bit for this.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently have various switch statements that check if an opcode needs
a file, mm, etc. These are hard to keep in sync as opcodes are added. Add
a struct io_op_def that holds all of this information, so we have just
one spot to update when opcodes are added.

This also enables us to NOT allocate req->io if a deferred command
doesn't need it, and corrects some mistakes we had in terms of what
commands need mm context.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

__io_free_req() and io_double_put_req() aren't used before they are
defined, so we can kill these two forwards.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Move io_queue_link_head() to links handling code in io_submit_sqe(),
so it wouldn't need extra checks and would have better data locality.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Calling "prev" a head of a link is a bit misleading. Rename it

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring defaults to always doing inline submissions, if at all
possible. But for larger copies, even if the data is fully cached, that
can take a long time. Add an IOSQE_ASYNC flag that the application can
set on the SQE - if set, it'll ensure that we always go async for those
kinds of requests. Use the io-wq IO_WQ_WORK_CONCURRENT flag to ensure we
get the concurrency we desire for this case.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

io-wq assumes that work will complete fast (and not block), so it
doesn't create a new worker when work is enqueued, if we already have
at least one worker running. This is done on the assumption that if work
is running, then it will complete fast.

Add an option to force io-wq to fork a new worker for work queued. This
is signaled by setting IO_WQ_WORK_CONCURRENT on the work item. For that
case, io-wq will create a new worker, even though workers are already
running.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This provides support for async statx(2) through io_uring.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

To implement an async stat, we need to provide the flags mapping and
the statx user copy. Make them available internally, through
fs/internal.h.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

We currently fully quiesce the ring before an unregister or update of
the fixed fileset. This is very expensive, and we can be a bit smarter
about this.

Add a percpu refcount for the file tables as a whole. Grab a percpu ref
when we use a registered file, and put it on completion. This is cheap
to do. Upon removal of a file from a set, switch the ref count to atomic
mode. When we hit zero ref on the completion side, then we know we can
drop the previously registered files. When the old files have been
dropped, switch the ref back to percpu mode for normal operation.

Since there's a period between doing the update and the kernel being
done with it, add a IORING_OP_FILES_UPDATE opcode that can perform the
same action. The application knows the update has completed when it gets
the CQE for it. Between doing the update and receiving this completion,
the application must continue to use the unregistered fd if submitting
IO on this particular file.

This takes the runtime of test/file-register from liburing from 14s to
about 0.7s.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This works just like close(2), unsurprisingly. We remove the file
descriptor and post the completion inline, then offload the actual
(potential) last file put to async context.

Mark the async part of this work as uncancellable, as we really must
guarantee that the latter part of the close is run.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Not all work can be cancelled, some of it we may need to guarantee
that it runs to completion. Allow the caller to set IO_WQ_WORK_NO_CANCEL
on work that must not be cancelled. Note that the caller work function
must also check for IO_WQ_WORK_NO_CANCEL on work that is marked
IO_WQ_WORK_CANCEL.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Just one caller of this, and just use filp_close() there manually.
This is important to allow async close/removal of the fd.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This works just like openat(2), except it can be performed async. For
the normal case of a non-blocking path lookup this will complete
inline. If we have to do IO to perform the open, it'll be done from
async context.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is a prep patch for supporting non-blocking open from io_uring.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This exposes fallocate(2) through io_uring.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull in compatability fix for the files_update command.

* io_uring-5.5:
  io_uring: fix compat for IORING_REGISTER_FILES_UPDATE

fds field of struct io_uring_files_update is problematic with regards
to compat user space, as pointer size is different in 32-bit, 32-on-64-bit,
and 64-bit user space.  In order to avoid custom handling of compat in
the syscall implementation, make fds __u64 and use u64_to_user_ptr in
order to retrieve it.  Also, align the field naturally and check that
no garbage is passed there.

Fixes: c3a31e60

 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-5.6/io_uring-vfs

Pull in Al's openat2 branch, since we'll need that for the openat2
support.

* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Documentation: path-lookup: include new LOOKUP flags
  selftests: add openat2(2) selftests
  open: introduce openat2(2) syscall
  namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
  namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
  namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
  namei: LOOKUP_NO_XDEV: block mountpoint crossing
  namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
  namei: LOOKUP_NO_SYMLINKS: block symlink resolution
  namei: allow set_root() to produce errors
  namei: allow nd_jump_link() to produce errors
  nsfs: clean-up ns_get_path() signature to return int
  namei: only return -ECHILD from follow_dotdot_rcu()