- Jun 09, 2023
-
-
Tim Huang authored
commit bfc03568 upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk and pp_dpm_fclk. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels that from the DFPstateTable are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Huang authored
commit 6a07826f upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk and pp_dpm_fclk. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels that from the DFPstateTable are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ikshwaku Chauhan authored
commit 663b930e upstream. Add IP GC 11.0.1 in the list of target to have tmz enabled by default. Signed-off-by:
Ikshwaku Chauhan <ikshwaku.chauhan@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 7f875850 upstream. For devices not attached to a port multiplier and managed directly by libata, the device number passed to ata_find_dev() must always be lower than the maximum number of devices returned by ata_link_max_devices(). That is 1 for SATA devices or 2 for an IDE link with master+slave devices. This device number is the SCSI device ID which matches these constraints as the IDs are generated per port and so never exceed the maximum number of devices for the link being used. However, for libsas managed devices, SCSI device IDs are assigned per struct scsi_host, leading to device IDs for SATA devices that can be well in excess of libata per-link maximum number of devices. This results in ata_find_dev() to always return NULL for libsas managed devices except for the first device of the target scsi_host with ID (device number) equal to 0. This issue is visible by executing the hdparm utility, which fails. E.g.: hdparm -i /dev/sdX /dev/sdX: HDIO_GET_IDENTITY failed: No message of desired type Fix this by rewriting ata_find_dev() to ignore the device number for non-PMP attached devices with a link with at most 1 device, that is SATA devices. For these, the device number 0 is always used to return the correct pointer to the struct ata_device of the port link. This change excludes IDE master/slave setups (maximum number of devices per link is 2) and port-multiplier attached devices. Also, to be consistant with the fact that SCSI device IDs and channel numbers used as device numbers are both unsigned int, change the devno argument of ata_find_dev() to unsigned int. Reported-by:
Xingui Yang <yangxingui@huawei.com> Fixes: 41bda9c9 ("libata-link: update hotplug to handle PMP links") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit 6d074ce2 upstream. gcc 13 may assign another type to enumeration constants than gcc 12. Split the large enum at the top of source file stex.c such that the type of the constants used in time expressions is changed back to the same type chosen by gcc 12. This patch suppresses compiler warnings like this one: In file included from ./include/linux/bitops.h:7, from ./include/linux/kernel.h:22, from drivers/scsi/stex.c:13: drivers/scsi/stex.c: In function ‘stex_common_handshake’: ./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror] 12 | (void)(&__dummy == &__dummy2); \ | ^~ ./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’ 106 | typecheck(unsigned long, b) && \ | ^~~~~~~~~ drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’ 1035 | if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) { | ^~~~~~~~~~ See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405 . Cc: stable@vger.kernel.org Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Acayan authored
commit 46248400 upstream. The channel's rpmsg object allows new invocations to be made. After old invocations are already interrupted, the driver shouldn't try to invoke anymore. Invalidating the rpmsg at the end of the driver removal function makes it easy to cause a race condition in userspace. Even closing a file descriptor before the driver finishes its cleanup can cause an invocation via fastrpc_release_current_dsp_process() and subsequent timeout. Invalidate the channel before the invocations are interrupted to make sure that no invocations can be created to hang after the device closes. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-5-srinivas.kandagatla@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Acayan authored
commit b6a06285 upstream. The return value is initialized as -1, or -EPERM. The completion of an invocation implies that the return value is set appropriately, but "Permission denied" does not accurately describe the outcome of the invocation. Set the invocation's return value to a more appropriate "Broken pipe", as the cleanup breaks the driver's connection with rpmsg. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-4-srinivas.kandagatla@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ekansh Gupta authored
commit 3c7d0079 upstream. The userspace map request for remote heap allocates CMA memory. The ownership of this memory needs to be reassigned to proper owners to allow access from the protection domain running on DSP. This reassigning of ownership is not correct if done for any other supported flags. When any other flag is requested from userspace, fastrpc is trying to reassign the ownership of memory and this reassignment is getting skipped for remote heap request which is incorrect. Add proper flag check to reassign the memory only if remote heap is requested. Fixes: 532ad70c ("misc: fastrpc: Add mmap request assigning for static PD pool") Cc: stable <stable@kernel.org> Tested-by:
Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by:
Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-3-srinivas.kandagatla@linaro.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yu Kuai authored
commit 8557dc27 upstream. 'end_sector' is compared to 'rdev->recovery_offset', which is offset to rdev, however, commit e82ed3a4 ("md/raid6: refactor raid5_read_one_chunk") changes the calculation of 'end_sector' to offset to the array. Fix this miscalculation. Fixes: e82ed3a4 ("md/raid6: refactor raid5_read_one_chunk") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230524014118.3172781-1-yukuai1@huaweicloud.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uttkarsh Aggarwal authored
commit efb6b535 upstream. While exercising the unbind path, with the current implementation the functionfs_unbind would be calling which waits for the ffs->mutex to be available, however within the same time ffs_ep0_read is invoked & if no setup packets are pending, it will invoke function wait_event_interruptible_exclusive_locked_irq which by definition waits for the ev.count to be increased inside the same mutex for which functionfs_unbind is waiting. This creates deadlock situation because the functionfs_unbind won't get the lock until ev.count is increased which can only happen if the caller ffs_func_unbind can proceed further. Following is the illustration: CPU1 CPU2 ffs_func_unbind() ffs_ep0_read() mutex_lock(ffs->mutex) wait_event(ffs->ev.count) functionfs_unbind() mutex_lock(ffs->mutex) mutex_unlock(ffs->mutex) ffs_event_add() <deadlock> Fix this by moving the event unbind before functionfs_unbind to ensure the ev.count is incrased properly. Fixes: 6a19da11 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait") Cc: stable <stable@kernel.org> Signed-off-by:
Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com> Link: https://lore.kernel.org/r/20230525092854.7992-1-quic_uaggarwa@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frank Li authored
commit dbe678f6 upstream. At iMX8QM platform, enable NCM gadget and run 'iperf3 -s'. At host, run 'iperf3 -V -c fe80::6863:98ff:feef:3e0%enxc6e147509498' [ 5] 0.00-1.00 sec 1.55 MBytes 13.0 Mbits/sec 90 4.18 KBytes [ 5] 1.00-2.00 sec 1.44 MBytes 12.0 Mbits/sec 75 4.18 KBytes [ 5] 2.00-3.00 sec 1.48 MBytes 12.4 Mbits/sec 75 4.18 KBytes Expected speed should be bigger than 300Mbits/sec. The root cause of this performance drop was found to be data corruption happening at 4K borders in some Ethernet packets, leading to TCP checksum errors. This corruption occurs from the position (4K - (address & 0x7F)) to 4K. The u_ether function's allocation of skb_buff reserves 64B, meaning all RX addresses resemble 0xXXXX0040. Force trb_burst_size to 16 can fix this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c3 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230518154946.3666662-1-Frank.Li@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Vasut authored
commit 7b32040f upstream. The "snps,hsphy_interface" is string, not u8. Fix the type. Fixes: 389d7765 ("dt-bindings: usb: Convert DWC USB3 bindings to DT schema") Cc: stable <stable@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20230515172456.179049-1-marex@denx.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sebastian Krzyszkowiak authored
commit 36936a56 upstream. BM818 is based on Qualcomm MDM9607 chipset. Fixes: 9a07406b ("net: usb: qmi_wwan: Add the BroadMobi BM818 card") Cc: stable@vger.kernel.org Signed-off-by:
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.sm Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Bulwahn authored
commit a146eccb upstream. Commit 28d1a7ac ("iio: dac: Add AD5758 support") adds the config AD5758 and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver is however included when AD5755 is selected, not when AD5758 is selected. Probably, this was simply a mistake that happened by copy-and-paste and forgetting to adjust the actual line. Surprisingly, no one has ever noticed that this driver is actually only included when AD5755 is selected and that the config AD5758 has actually no effect on the build. Fixes: 28d1a7ac ("iio: dac: Add AD5758 support") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230508040208.12033-1-lukas.bulwahn@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Nyekjaer authored
commit 9c0d6ccd upstream. If no adc differential channels are defined driver will fail with EINVAL: stm32-adc: probe of 48003000.adc:adc@0 failed with error -22 Fix this by skipping the initialization if no channels are defined. This applies only to the legacy way of initializing adc channels. Fixes: d7705f35 ("iio: adc: stm32-adc: convert to device properties") Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20230503162029.3654093-1-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Cercueil authored
commit e55245d1 upstream. The AD7192 provides a specific channel configuration where both negative and positive inputs are connected to AIN2. This was represented in the ad7192 driver as a IIO channel with .channel = 2 and .extended_name set to "shorted". The problem with this approach, is that the driver provided two IIO channels with the identifier .channel = 2; one "shorted" and the other not. This goes against the IIO ABI, as a channel identifier should be unique. Address this issue by changing "shorted" channels to being differential instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs. itself. Note that the fix tag is for the commit that moved the driver out of staging. The bug existed before that, but backporting would become very complex further down and unlikely to happen. Fixes: b581f748 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Co-developed-by:
Alisa Roman <alisa.roman@analog.com> Signed-off-by:
Alisa Roman <alisa.roman@analog.com> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230330102100.17590-1-paul@crapouillou.net Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rasmus Villemoes authored
commit 24febc99 upstream. On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka 1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively equivalent to the IIO_CHAN_INFO_RAW case, and we never call ad74413r_adc_to_resistance_result() to convert the adc measurement to ohms. Check ret for being negative rather than non-zero. Fixes: fea251b6 (iio: addac: add AD74413R driver) Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230503095817.452551-1-linux@rasmusvillemoes.dk Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Vasut authored
commit 09d3bec7 upstream. The i2c_master_send() returns number of sent bytes on success, or negative on error. The suspend/resume callbacks expect zero on success and non-zero on error. Adapt the return value of the i2c_master_send() to the expectation of the suspend and resume callbacks, including proper validation of the return value. Fixes: cf35ad61 ("iio: add mcp4725 I2C DAC driver") Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230511004330.206942-1-marex@denx.de Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Honda authored
commit 626d3120 upstream. The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt line to indicate the completion of a conversion. However, some devices cannot properly detect the completion of a conversion by an interrupt. This is for the reason mentioned in the following commit. commit e9849777 ("genirq: Add flag to force mask in disable_irq[_nosync]()") A read operation is performed by an extra interrupt before the completion of a conversion. At this time, the value read from the ADC data register is the same as the previous conversion result. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag. Fixes: 0c6ef985 ("iio: adc: ad7791: fix IRQ flags") Fixes: 1a913270 ("iio: adc: ad7793: Fix IRQ flag") Fixes: e081102f ("iio: adc: ad7780: Fix IRQ flag") Fixes: 89a86da5 ("iio: adc: ad7192: Add IRQ flag") Fixes: 79ef9149 ("iio: adc: ad7124: Set IRQ type to falling") Signed-off-by:
Masahiro Honda <honda@mechatrax.com> Link: https://lore.kernel.org/r/20230518110816.248-1-honda@mechatrax.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Nyekjaer authored
commit 3e27ef0c upstream. If only adc differential channels are defined driver will fail with stm32-adc: probe of 48003000.adc:adc@0 failed with error -22 Fix this by skipping the initialization if no channels are defined. This applies only to the legacy way of initializing adc channels. Fixes: d7705f35 ("iio: adc: stm32-adc: convert to device properties") Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Reviewed-by:
Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20230503162029.3654093-2-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matti Vaittinen authored
commit 56cd3d1c upstream. The fwnode_irq_get_byname() was returning 0 at device-tree mapping error. If this occurred, the KX022A driver did abort the probe but errorneously directly returned the return value from fwnode_irq_get_byname() from probe. In case of a device-tree mapping error this indicated success. The fwnode_irq_get_byname() has since been fixed to not return zero on error so the check for fwnode_irq_get_byname() can be relaxed to only treat negative values as errors. This will also do decent fix even when backported to branches where fwnode_irq_get_byname() can still return zero on error because KX022A probe should later fail at IRQ requesting and a prober error handling should follow. Relax the return value check for fwnode_irq_get_byname() to only treat negative values as errors. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/ Link: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/ Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 7c1d1677 ("iio: accel: Support Kionix/ROHM KX022A accelerometer") Link: https://lore.kernel.org/r/b45b4b638db109c6078d243252df3a7b0485f7d5.1683875389.git.mazziesaccount@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Frank Li authored
commit a551c26e upstream. VCNL4035 register(0xE) ID_L and ID_M define as: ID_L: 0x80 ID_H: 7:6 (0:0) 5:4 (0:0) slave address = 0x60 (7-bit) (0:1) slave address = 0x51 (7-bit) (1:0) slave address = 0x40 (7-bit) (1:0) slave address = 0x41 (7-bit) 3:0 Version code default (0:0:0:0) So just check ID_L. Fixes: 55707294 ("iio: light: Add support for vishay vcnl4035") Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230501143605.1615549-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Geert Uytterhoeven authored
commit 55720d24 upstream. The conversion to json-schema accidentally dropped the "ad" part prefix from the compatible value. Fixes: 8c412458 ("dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/6b328a3f52657c20759f3a5bb2fe033d47644ba8.1683635404.git.geert+renesas@glider.be Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jean-Baptiste Maneyrol authored
commit bbaae0c7 upstream. Timestamp reset is not done in the correct place. It must be done before enabling buffer. The reason is that interrupt timestamping is always happening when the chip is on, even if the corresponding sensor is off. When the sensor restarts, timestamp is wrong if you don't do a reset first. Fixes: ec74ae9f ("iio: imu: inv_icm42600: add accurate timestamping") Signed-off-by:
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230509152202.245444-1-inv.git-commit@tdk.com Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nikita Zhandarovich authored
commit bd249b91 upstream. If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic operations and integer promotions are done, high bits in wacom->serial[idx] will be filled with 1s as well. Avoid this, albeit unlikely, issue by specifying left operand's __u64 type for the right operand. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3bea733a ("USB: wacom tablet driver reorganization") Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Cc: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sung-Chi Li authored
commit ed84c451 upstream. Add 1 additional hammer-like device. Signed-off-by:
Sung-Chi Li <lschyi@chromium.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
ChiaEn Wu authored
commit 00ffdd6f upstream. The scale value of ibus and ibat on the datasheet is incorrect due to the customer report after the experimentation with some specific vendor ID chips. Fixes: c1404d1b ("iio: adc: mt6370: Add MediaTek MT6370 support") Signed-off-by:
ChiaEn Wu <chiaen_wu@richtek.com> Reviewed-by:
Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/1681122862-1994-1-git-send-email-chiaen_wu@richtek.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
commit 28f73ded upstream. The ad4130 driver registers a clock provider, but never removes it. This leaves a stale clock provider behind that references freed clocks when the device is unbound. Register a managed action to remove the clock provider when the device is removed. Fixes: 62094060 ("iio: adc: ad4130: add AD4130 driver") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230414150702.518441-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
commit 265c82ea upstream. The tmag5273 gets a runtime PM reference before reading a measurement and releases it when done. But if the measurement fails the tmag5273_read_raw() function exits before releasing the reference. Make sure that this error path also releases the runtime PM reference. Fixes: 866a1389 ("iio: magnetometer: add ti tmag5273 driver") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiakai Luo authored
commit 27b2ed5b upstream. Smatch reports: drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn: missing unwind goto? the order of three init operation: 1.mxs_lradc_adc_trigger_init 2.iio_triggered_buffer_setup 3.mxs_lradc_adc_hw_init thus, the order of three cleanup operation should be: 1.mxs_lradc_adc_hw_stop 2.iio_triggered_buffer_cleanup 3.mxs_lradc_adc_trigger_remove we exchange the order of two cleanup operations, introducing the following differences: 1.if mxs_lradc_adc_trigger_init fails, returns directly; 2.if trigger_init succeeds but iio_triggered_buffer_setup fails, goto err_trig and remove the trigger. In addition, we also reorder the unwind that goes on in the remove() callback to match the new ordering. Fixes: 6dd112b9 ("iio: adc: mxs-lradc: Add support for ADC driver") Signed-off-by:
Jiakai Luo <jkluo@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 79b8ded9 upstream. When apply_acpi_orientation() fails, st_accel_common_probe() will fall back to iio_read_mount_matrix(), which checks for a mount-matrix device property and if that is not set falls back to the identity matrix. But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode does not have a "_ONT" method apply_acpi_orientation() was returning 0, causing iio_read_mount_matrix() to never get called resulting in an invalid mount_matrix: [root@fedora ~]# cat /sys/bus/iio/devices/iio\:device0/mount_matrix (null), (null), (null); (null), (null), (null); (null), (null), (null) Fix this by making apply_acpi_orientation() always return an error when it did not set the mount_matrix. Fixes: 3d8ad94b ("iio: accel: st_sensors: Support generic mounting matrix") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Marius Hoch <mail@mariushoch.de> Link: https://lore.kernel.org/r/20230416212409.310936-1-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aric Cyr authored
[ Upstream commit 82a10aff ] [why] If OTG is not active, waiting for blank completion will always fail and timeout resulting in unnecessary driver delays. [how] Check that OTG is enabled before waiting for blank. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Masami Hiramatsu (Google) authored
[ Upstream commit eb50d0f2 ] Since the event-filter-function.tc expects the 'exit_mmap()' directly calls 'kmem_cache_free()', this is vulnerable to code modifications. Choose the target function for the filter test from the sample event data so that it can keep test running correctly even if the caller function name will be changed. Link: https://lore.kernel.org/linux-trace-kernel/167919441260.1922645.18355804179347364057.stgit@mhiramat.roam.corp.google.com/ Link: https://lore.kernel.org/all/CA+G9fYtF-XEKi9YNGgR=Kf==7iRb2FrmEC7qtwAeQbfyah-UhA@mail.gmail.com/ Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 7f09d639 ("tracing/selftests: Add test for event filtering on function name") Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Laurent Pinchart authored
[ Upstream commit 81f3affa ] When the uvcvideo driver encounters a format descriptor with an unknown format GUID, it creates a corresponding struct uvc_format instance with the fcc field set to 0. Since commit 50459f10 ("media: uvcvideo: Remove format descriptions"), the driver relies on the V4L2 core to provide the format description string, which the V4L2 core can't do without a valid 4CC. This triggers a WARN_ON. As a format with a zero 4CC can't be selected, it is unusable for applications. Ignore the format completely without creating a uvc_format instance, which fixes the warning. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217252 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2180107 Fixes: 50459f10 ("media: uvcvideo: Remove format descriptions") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Francesco Dolcini authored
[ Upstream commit 403e97d6 ] Add rs485-rts-active-high property, this was removed by mistake. In general we just use rs485-rts-active-low property, however the OMAP UART for legacy reason uses the -high one. Fixes: 767d3467 ("dt-bindings: serial: 8250_omap: drop rs485 properties") Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/ Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230531111038.6302-1-francesco@dolcini.it Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
K Prateek Nayak authored
[ Upstream commit c26fabe7 ] Until commit 5c271238 ("cacheinfo: Fix LLC is not exported through sysfs"), cacheinfo called populate_cache_leaves() for CPU coming online which let the arch specific functions handle (at least on x86) populating the shared_cpu_map. However, with the changes in the aforementioned commit, populate_cache_leaves() is not called when a CPU comes online as a result of hotplug since last_level_cache_is_valid() returns true as the cacheinfo data is not discarded. The CPU coming online is not present in shared_cpu_map, however, it will not be added since the cpu_cacheinfo->cpu_map_populated flag is set (it is set in populate_cache_leaves() when cacheinfo is first populated for x86) This can lead to inconsistencies in the shared_cpu_map when an offlined CPU comes online again. Example below depicts the inconsistency in the shared_cpu_list in cacheinfo when CPU8 is offlined and onlined again on a 3rd Generation EPYC processor: # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143 # echo 0 > /sys/devices/system/cpu/cpu8/online # echo 1 > /sys/devices/system/cpu/cpu8/online # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8 # cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list 136 # cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list 9-15,136-143 Clear the flag when the CPU is removed from shared_cpu_map when cache_shared_cpu_map_remove() is called during CPU hotplug. This will allow cache_shared_cpu_map_setup() to add the CPU coming back online in the shared_cpu_map. Set the flag again when the shared_cpu_map is setup. Following are results of performing the same test as described above with the changes: # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143 # echo 0 > /sys/devices/system/cpu/cpu8/online # echo 1 > /sys/devices/system/cpu/cpu8/online # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143 # cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list 8,136 # cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list 8-15,136-143 Fixes: 5c271238 ("cacheinfo: Fix LLC is not exported through sysfs") Signed-off-by:
K Prateek Nayak <kprateek.nayak@amd.com> Reviewed-by:
Yicong Yang <yangyicong@hisilicon.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20230508084115.1157-3-kprateek.nayak@amd.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
K Prateek Nayak authored
[ Upstream commit 126310c9 ] While building the shared_cpu_map, check if the cache level and cache type matches. On certain systems that build the cache topology based on the instance ID, there are cases where the same ID may repeat across multiple cache levels, leading inaccurate topology. In event of CPU offlining, the cache_shared_cpu_map_remove() does not consider if IDs at same level are being compared. As a result, when same IDs repeat across different cache levels, the CPU going offline is not removed from all the shared_cpu_map. Below is the output of cache topology of CPU8 and it's SMT sibling after CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor (2 x 64C/128T) running kernel release v6.3: # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143 # echo 0 > /sys/devices/system/cpu/cpu8/online # for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136 /sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143 CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the SMT siblings, and they have the same cache instance ID, CPU 2 is only removed from the first index with matching ID which is index1 (L1i) in this case. With this fix, the results are as expected when performing the same experiment on the same system: # for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136 /sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143 # echo 0 > /sys/devices/system/cpu/cpu8/online # for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136 /sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136 /sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136 /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143 When rebuilding topology, the same problem appears as cache_shared_cpu_map_setup() implements a similar logic. Consider the same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1 and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs sharing one cache domain. This went undetected since x86 processors depended on arch specific populate_cache_leaves() method to repopulate the shared_cpus_map when CPU came back online until kernel release v6.3-rc5. Fixes: 198102c9 ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels") Signed-off-by:
K Prateek Nayak <kprateek.nayak@amd.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20230508084115.1157-2-kprateek.nayak@amd.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 8fe72b76 ] There was a bug where this code forgot to unlock the tdev->mutex if the kzalloc() failed. Fix this issue, by moving the allocation outside the lock. Fixes: 2d1e952a ("mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Lee Jones <lee@kernel.org> Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pin-yen Lin authored
[ Upstream commit ed17f89e ] When VCODEC_CAPABILITY_4K_DISABLED is not set in dec_capability, skip formats that are not MTK_FMT_DEC so only decoder formats is updated in mtk_init_vdec_params. Fixes: e25528e1 ("media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder") Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fuad Tabba authored
[ Upstream commit a9f0e3d5 ] The preorder callback on the kvm_pgtable_stage2_map() path can replace a table with a block, then recursively free the detached table. The higher-level walking logic stashes the old page table entry and then walks the freed table, invoking the leaf callback and potentially freeing pgtable pages prematurely. In normal operation, the call to tear down the detached stage-2 is indirected and uses an RCU callback to trigger the freeing. RCU is not available to pKVM, which is where this bug is triggered. Change the behavior of the walker to reload the page table entry after invoking the walker callback on preorder traversal, as it does for leaf entries. Tested on Pixel 6. Fixes: 5c359cca ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make") Suggested-by:
Oliver Upton <oliver.upton@linux.dev> Signed-off-by:
Fuad Tabba <tabba@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230522103258.402272-1-tabba@google.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-