The instruction emulator ignores clflush instructions, yet fails to
support clflushopt. Treat both similarly.

Fixes: 13e457e0

 ("KVM: x86: Emulator does not decode clflush well")
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201103120400.240882-1-david.edmondson@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for v5.10, take #3

- Allow userspace to downgrade ID_AA64PFR0_EL1.CSV2
- Inject UNDEF on SCXTNUM_ELx access

Pull fscrypt fix from Eric Biggers:
 "Fix a regression where new files weren't using inline encryption when
  they should be"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: fix inline encryption not used on new files

Pull gfs2 fixes from Andreas Gruenbacher:
 "Fix jdata data corruption and glock reference leak"

* tag 'gfs2-v5.10-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix case in which ail writes are done to jdata holes
  Revert "gfs2: Ignore journal log writes for jdata holes"
  gfs2: fix possible reference leak in gfs2_check_blk_type

Pull networking fixes from Jakub Kicinski:
 "Current release - regressions:

   - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
     ENETC

  Current release - bugs in new features:

   - mptcp: provide rmem[0] limit offset to fix oops

  Previous release - regressions:

   - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
     calculations

   - lan743x: correctly handle chips with internal PHY

   - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE

   - mlx5e: Fix VXLAN port table synchronization after function reload

  Previous release - always broken:

   - bpf: Zero-fill re-used per-cpu map element

   - fix out-of-order UDP packets when forwarding with UDP GSO fraglists
     turned on:
       - fix UDP header access on Fast/frag0 UDP GRO
       - fix IP header access and skb lookup on Fast/frag0 UDP GRO

   - ethtool: netlink: add missing netdev_features_change() call

   - net: Update window_clamp if SOCK_RCVBUF is set

   - igc: Fix returning wrong statistics

   - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload

   - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies

   - r8169: disable hw csum for short packets on all chip versions

   - vrf: Fix fast path output packet handling with async Netfilter
     rules"

* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  lan743x: fix use of uninitialized variable
  net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
  net: udp: fix UDP header access on Fast/frag0 UDP GRO
  devlink: Avoid overwriting port attributes of registered port
  vrf: Fix fast path output packet handling with async Netfilter rules
  cosa: Add missing kfree in error path of cosa_write
  net: switch to the kernel.org patchwork instance
  ch_ktls: stop the txq if reaches threshold
  ch_ktls: tcb update fails sometimes
  ch_ktls/cxgb4: handle partial tag alone SKBs
  ch_ktls: don't free skb before sending FIN
  ch_ktls: packet handling prior to start marker
  ch_ktls: Correction in middle record handling
  ch_ktls: missing handling of header alone
  ch_ktls: Correction in trimmed_len calculation
  cxgb4/ch_ktls: creating skbs causes panic
  ch_ktls: Update cheksum information
  ch_ktls: Correction in finding correct length
  cxgb4/ch_ktls: decrypted bit is not enough
  net/x25: Fix null-ptr-deref in x25_connect
  ...

Pull NFS client bugfixes from Anna Schumaker:
 "Stable fixes:
  - Fix failure to unregister shrinker

  Other fixes:
  - Fix unnecessary locking to clear up some contention
  - Fix listxattr receive buffer size
  - Fix default mount options for nfsroot"

* tag 'nfs-for-5.10-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Remove unnecessary inode lock in nfs_fsync_dir()
  NFS: Remove unnecessary inode locking in nfs_llseek_dir()
  NFS: Fix listxattr receive buffer size
  NFSv4.2: fix failure to unregister shrinker
  nfsroot: Default mount option should ask for built-in NFS version

As the kernel never sets HCR_EL2.EnSCXT, accesses to SCXTNUM_ELx
will trap to EL2. Let's handle that as gracefully as possible
by injecting an UNDEF exception into the guest. This is consistent
with the guest's view of ID_AA64PFR0_EL1.CSV2 being at most 1.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201110141308.451654-4-maz@kernel.org

A large number of system register trap handlers only inject an
UNDEF exeption, and yet each class of sysreg seems to provide its
own, identical function.

Let's unify them all, saving us introducing yet another one later.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201110141308.451654-3-maz@kernel.org

We now expose ID_AA64PFR0_EL1.CSV2=1 to guests running on hosts
that are immune to Spectre-v2, but that don't have this field set,
most likely because they predate the specification.

However, this prevents the migration of guests that have started on
a host the doesn't fake this CSV2 setting to one that does, as KVM
rejects the write to ID_AA64PFR0_EL2 on the grounds that it isn't
what is already there.

In order to fix this, allow userspace to set this field as long as
this doesn't result in a promising more than what is already there
(setting CSV2 to 0 is acceptable, but setting it to 1 when it is
already set to 0 isn't).

Fixes: e1026237

 ("KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2")
Reported-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201110141308.451654-2-maz@kernel.org

Linux 5.10-rc1

Signed-off-by: Marc Zyngier <maz@kernel.org>

Pull ACPI fixes from Rafael Wysocki:
 "These are mostly docmentation fixes and janitorial changes plus some
  new device IDs and a new quirk.

  Specifics:

   - Fix documentation regarding GPIO properties (Andy Shevchenko)

   - Fix spelling mistakes in ACPI documentation (Flavio Suligoi)

   - Fix white space inconsistencies in ACPI code (Maximilian Luz)

   - Fix string formatting in the ACPI Generic Event Device (GED) driver
     (Nick Desaulniers)

   - Add Intel Alder Lake device IDs to the ACPI drivers used by the
     Dynamic Platform and Thermal Framework (Srinivas Pandruvada)

   - Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI
     button driver (Hans de Goede)"

* tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Support Alder Lake
  Documentation: ACPI: fix spelling mistakes
  ACPI: button: Add DMI quirk for Medion Akoya E2228T
  ACPI: GED: fix -Wformat
  ACPI: Fix whitespace inconsistencies
  ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name
  Documentation: firmware-guide: gpio-properties: Clarify initial output state
  Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
  Documentation: firmware-guide: gpio-properties: Fix factual mistakes

Pull power management fixes from Rafael Wysocki:
 "Make the intel_pstate driver behave as expected when it operates in
  the passive mode with HWP enabled and the 'powersave' governor on top
  of it"

* tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account
  cpufreq: Add strict_target to struct cpufreq_policy
  cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET
  cpufreq: Introduce governor flags

When no devicetree is present, the driver will use an
uninitialized variable.

Fix by initializing this variable.

Fixes: 902a66e0

 ("lan743x: correctly handle chips with internal PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alexander Lobakin says:

====================
net: udp: fix Fast/frag0 UDP GRO

While testing UDP GSO fraglists forwarding through driver that uses
Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order
iperf packets:

[ ID] Interval           Transfer     Bitrate         Jitter
[SUM]  0.0-40.0 sec  12106 datagrams received out-of-order

Simple switch to napi_gro_receive() or any other method without frag0
shortcut completely resolved them.

I've found two incorrect header accesses in GRO receive callback(s):
 - udp_hdr() (instead of udp_gro_udphdr()) that always points to junk
   in "fast" mode and could probably do this in "regular".
   This was the actual bug that caused all out-of-order delivers;
 - udp{4,6}_lib_lookup_skb() -> ip{,v6}_hdr() (instead of
   skb_gro_network_header()) that potentionally might return odd
   pointers in both modes.

Each patch addresses one of these two issues.

This doesn't cover a support for nested tunnels as it's out of the
subject and requires more invasive changes. It will be handled
separately in net-next series.

Credits:
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>

Since v4 [0]:
 - split the fix into two logical ones (Willem);
 - replace ternaries with plain ifs to beautify the code (Jakub);
 - drop p->data part to reintroduce it later in abovementioned set.

Since v3 [1]:
 - restore the original {,__}udp{4,6}_lib_lookup_skb() and use
   private versions of them inside GRO code (Willem).

Since v2 [2]:
 - dropped redundant check introduced in v2 as it's performed right
   before (thanks to Eric);
 - udp_hdr() switched to data + off for skbs from list (also Eric);
 - fixed possible malfunction of {,__}udp{4,6}_lib_lookup_skb() with
   Fast/frag0 due to ip{,v6}_hdr() usage (Willem).

Since v1 [3]:
 - added a NULL pointer check for "uh" as suggested by Willem.

[0] https://lore.kernel.org/netdev/Ha2hou5eJPcblo4abjAqxZRzIl1RaLs2Hy0oOAgFs@cp4-web-036.plabs.ch
[1] https://lore.kernel.org/netdev/MgZce9htmEtCtHg7pmWxXXfdhmQ6AHrnltXC41zOoo@cp7-web-042.plabs.ch
[2] https://lore.kernel.org/netdev/0eaG8xtbtKY1dEKCTKUBubGiC9QawGgB3tVZtNqVdY@cp4-web-030.plabs.ch
[3] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch
====================

Link: https://lore.kernel.org/r/hjGOh0iCOYyo1FPiZh6TMXcx3YCgNs1T1eGKLrDz8@cp4-web-037.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the
packet. While it's probably OK for non-frag0 paths, this helpers
will also point to junk on Fast/frag0 GRO when all headers are
located in frags. As a result, sk/skb lookup may fail or give wrong
results. To support both GRO modes, skb_gro_network_header() might
be used. To not modify original functions, add private versions of
udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO.

Present since the introduction of "application-level" UDP GRO
in 4.7-rc1.

Misc: replace totally unneeded ternaries with plain ifs.

Fixes: a6024562

 ("udp: Add GRO functions to UDP socket")
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's
probably OK for non-frag0 paths (when all headers or even the entire
frame are already in skb head), this inline points to junk when
using Fast GRO (napi_gro_frags() or napi_gro_receive() with only
Ethernet header in skb head and all the rest in the frags) and breaks
GRO packet compilation and the packet flow itself.
To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
are typically used. UDP even has an inline helper that makes use of
them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
to get rid of the out-of-order delivers.

Present since the introduction of plain UDP GRO in 5.0-rc1.

Fixes: e20cf8d3

 ("udp: implement GRO for plain UDP sockets.")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Patch b2a846db ("gfs2: Ignore journal log writes for jdata holes")
tried (unsuccessfully) to fix a case in which writes were done to jdata
blocks, the blocks are sent to the ail list, then a punch_hole or truncate
operation caused the blocks to be freed. In other words, the ail items
are for jdata holes. Before b2a846db

, the jdata hole caused function
gfs2_block_map to return -EIO, which was eventually interpreted as an
IO error to the journal, and then withdraw.

This patch changes function gfs2_get_block_noalloc, which is only used
for jdata writes, so it returns -ENODATA rather than -EIO, and when
-ENODATA is returned to gfs2_ail1_start_one, the error is ignored.
We can safely ignore it because gfs2_ail1_start_one is only called
when the jdata pages have already been written and truncated, so the
ail1 content no longer applies.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

This reverts commit b2a846db

.

That commit changed the behavior of function gfs2_block_map to return
-ENODATA in cases where a hole (IOMAP_HOLE) is encountered and create is
false.  While that fixed the intended problem for jdata, it also broke
other callers of gfs2_block_map such as some jdata block reads.  Before
the patch, an encountered hole would be skipped and the buffer seen as
unmapped by the caller.  The patch changed the behavior to return
-ENODATA, which is interpreted as an error by the caller.

The -ENODATA return code should be restricted to the specific case where
jdata holes are encountered during ail1 writes.  That will be done in a
later patch.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2020-11-10

This series contains updates to i40e and igc drivers and the MAINTAINERS
file.

Slawomir fixes updating VF MAC addresses to fix various issues related
to reporting and setting of these addresses for i40e.

Dan Carpenter fixes a possible used before being initialized issue for
i40e.

Vinicius fixes reporting of netdev stats for igc.

Tony updates repositories for Intel Ethernet Drivers.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  MAINTAINERS: Update repositories for Intel Ethernet Drivers
  igc: Fix returning wrong statistics
  i40e, xsk: uninitialized variable in i40e_clean_rx_irq_zc()
  i40e: Fix MAC address setting for a VF via Host/VM
====================

Link: https://lore.kernel.org/r/20201111001955.533210-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit in fixes tag overwrites the port attributes for the
registered port.

Avoid such error by checking registered flag before setting attributes.

Fixes: 71ad8d55

 ("devlink: Replace devlink_port_attrs_set parameters with a struct")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

VRF devices use an optimized direct path on output if a default qdisc
is involved, calling Netfilter hooks directly. This path, however, does
not consider Netfilter rules completing asynchronously, such as with
NFQUEUE. The Netfilter okfn() is called for asynchronously accepted
packets, but the VRF never passes that packet down the stack to send
it out over the slave device. Using the slower redirect path for this
seems not feasible, as we do not know beforehand if a Netfilter hook
has asynchronously completing rules.

Fix the use of asynchronously completing Netfilter rules in OUTPUT and
POSTROUTING by using a special completion function that additionally
calls dst_output() to pass the packet down the stack. Also, slightly
adjust the use of nf_reset_ct() so that is called in the asynchronous
case, too.

Fixes: dcdd43c4 ("net: vrf: performance improvements for IPv4")
Fixes: a9ec54d1

 ("net: vrf: performance improvements for IPv6")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfs_inc_stats() is already thread-safe, and there are no other reasons
to hold the inode lock here.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Remove the contentious inode lock, and instead provide thread safety
using the file->f_lock spinlock.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Certain NFSv4.2/RDMA tests fail with v5.9-rc1.

rpcrdma_convert_kvec() runs off the end of the rl_segments array
because rq_rcv_buf.tail[0].iov_len holds a very large positive
value. The resultant kernel memory corruption is enough to crash
the client system.

Callers of rpc_prepare_reply_pages() must reserve an extra XDR_UNIT
in the maximum decode size for a possible XDR pad of the contents
of the xdr_buf's pages. That guarantees the allocated receive buffer
will be large enough to accommodate the usual contents plus that XDR
pad word.

encode_op_hdr() cannot add that extra word. If it does,
xdr_inline_pages() underruns the length of the tail iovec.

Fixes: 3e1f0212

 ("NFSv4.2: add client side XDR handling for extended attributes")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

We forgot to unregister the nfs4_xattr_large_entry_shrinker.

That leaves the global list of shrinkers corrupted after unload of the
nfs module, after which possibly unrelated code that calls
register_shrinker() or unregister_shrinker() gets a BUG() with
"supervisor write access in kernel mode".

And similarly for the nfs4_xattr_large_entry_lru.

Reported-by: Kris Karas <bugs-a17@moonlit-rail.com>
Tested-By: Kris Karas <bugs-a17@moonlit-rail.com>
Fixes: 95ad37f9

 "NFSv4.2: add client side xattr caching."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

* acpi-scan:
  ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name

* acpi-misc:
  ACPI: GED: fix -Wformat
  ACPI: Fix whitespace inconsistencies

* acpi-button:
  ACPI: button: Add DMI quirk for Medion Akoya E2228T

* acpi-dptf:
  ACPI: DPTF: Support Alder Lake

In the fail path of gfs2_check_blk_type, forgetting to call
gfs2_glock_dq_uninit will result in rgd_gh reference leak.

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

The new helper function fscrypt_prepare_new_inode() runs before
S_ENCRYPTED has been set on the new inode.  This accidentally made
fscrypt_select_encryption_impl() never enable inline encryption on newly
created files, due to its use of fscrypt_needs_contents_encryption()
which only returns true when S_ENCRYPTED is set.

Fix this by using S_ISREG() directly instead of
fscrypt_needs_contents_encryption(), analogous to what
select_encryption_mode() does.

I didn't notice this earlier because by design, the user-visible
behavior is the same (other than performance, potentially) regardless of
whether inline encryption is used or not.

Fixes: a992b20c

 ("fscrypt: add fscrypt_prepare_new_inode() and fscrypt_set_context()")
Reviewed-by: Satya Tangirala <satyat@google.com>
Link: https://lore.kernel.org/r/20201111015224.303073-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a
corresponding kfree() in exception handling. Thus add kfree() for this
function implementation.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move to the kernel.org patchwork instance, it has significantly
lower latency for accessing from Europe and the US. Other quirks
include the reply bot.

Link: https://lore.kernel.org/r/20201110035120.642746-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rohit Maheshwari says:

====================
cxgb4/ch_ktls: Fixes in nic tls code

This series helps in fixing multiple nic ktls issues. Series is broken
into 12 patches.

Patch 1 avoids deciding tls packet based on decrypted bit. If its a
retransmit packet which has tls handshake and finish (for encryption),
decrypted bit won't be set there, and so we can't rely on decrypted
bit.

Patch 2 helps supporting linear skb. SKBs were assumed non-linear.
Corrected the length extraction.

Patch 3 fixes the checksum offload update in WR.

Patch 4 fixes kernel panic happening due to creating new skb for each
record. As part of fix driver will use same skb to send out one tls
record (partial data) of the same SKB.

Patch 5 fixes the problem of skb data length smaller than remaining data
of the record.

Patch 6 fixes the handling of SKBs which has tls header alone pkt, but
not starting from beginning.

Patch 7 avoids sending extra data which is used to make a record 16 byte
aligned. We don't need to retransmit those extra few bytes.

Patch 8 handles the cases where retransmit packet has tls starting
exchanges which are prior to tls start marker.

Patch 9 fixes the problem os skb free before HW knows about tcp FIN.

Patch 10 handles the small packet case which has partial TAG bytes only.
HW can't handle those, hence using sw crypto for such pkts.

Patch 11 corrects the potential tcb update problem.

Patch 12 stops the queue if queue reaches threshold value.

v1->v2:
- Corrected fixes tag issue.
- Marked chcr_ktls_sw_fallback() static.

v2->v3:
- Replaced GFP_KERNEL with GFP_ATOMIC.
- Removed mixed fixes.

v3->v4:
- Corrected fixes tag issue.

v4->v5:
- Separated mixed fixes from patch 4.

v5-v6:
- Fixes tag should be at the end.
====================

Link: https://lore.kernel.org/r/20201109105142.15398-1-rohitm@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Stop the queue and ask for the credits if queue reaches to
threashold.

Fixes: 5a4b9fe7

 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

context id and port id should be filled while sending tcb update.

Fixes: 5a4b9fe7

 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If TCP congestion caused a very small packets which only has some
part fo the TAG, and that too is not till the end. HW can't handle
such case, so falling back to sw crypto in such cases.

v1->v2:
- Marked chcr_ktls_sw_fallback() static.

Fixes: dc05f3df

 ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If its a last packet and fin is set. Make sure FIN is informed
to HW before skb gets freed.

Fixes: 429765a1

 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There could be a case where ACK for tls exchanges prior to start
marker is missed out, and by the time tls is offloaded. This pkt
should not be discarded and handled carefully. It could be
plaintext alone or plaintext + finish as well.

Fixes: 5a4b9fe7

 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a record starts in middle, reset TCB UNA so that we could
avoid sending out extra packet which is needed to make it 16
byte aligned to start AES CTR.
Check also considers prev_seq, which should be what is
actually sent, not the skb data length.
Avoid updating partial TAG to HW at any point of time, that's
why we need to check if remaining part is smaller than TAG
size, then reset TX_MAX to be TAG starting sequence number.

Fixes: 5a4b9fe7

 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If an skb has only header part which doesn't start from
beginning, is not being handled properly.

Fixes: dc05f3df

 ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

trimmed length calculation goes wrong if skb has only tag part
to send. It should be zero if there is no data bytes apart from
TAG.

Fixes: dc05f3df

 ("chcr: Handle first or middle part of record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Creating SKB per tls record and freeing the original one causes
panic. There will be race if connection reset is requested. By
freeing original skb, refcnt will be decremented and that means,
there is no pending record to send, and so tls_dev_del will be
requested in control path while SKB of related connection is in
queue.
 Better approach is to use same SKB to send one record (partial
data) at a time. We still have to create a new SKB when partial
last part of a record is requested.
 This fix introduces new API cxgb4_write_partial_sgl() to send
partial part of skb. Present cxgb4_write_sgl can only provide
feasibility to start from an offset which limits to header only
and it can write sgls for the whole skb len. But this new API
will help in both. It can start from any offset and can end
writing in middle of the skb.

v4->v5:
- Removed extra changes.

Fixes: 429765a1

 ("chcr: handle partial end part of a record")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>