- Feb 29, 2020
-
-
Gustavo Luiz Duarte authored
commit 2464cc4c upstream. After a treclaim, we expect to be in non-transactional state. If we don't clear the current thread's MSR[TS] before we get preempted, then tm_recheckpoint_new_task() will recheckpoint and we get rescheduled in suspended transaction state. When handling a signal caught in transactional state, handle_rt_signal64() calls get_tm_stackpointer() that treclaims the transaction using tm_reclaim_current() but without clearing the thread's MSR[TS]. This can cause the TM Bad Thing exception below if later we pagefault and get preempted trying to access the user's sigframe, using __put_user(). Afterwards, when we are rescheduled back into do_page_fault() (but now in suspended state since the thread's MSR[TS] was not cleared), upon executing 'rfid' after completion of the page fault handling, the exception is raised because a transition from suspended to non-transactional state is invalid. Unexpected TM Bad Thing exception at c00000000000de44 (msr 0x8000000302a03031) tm_scratch=800000010280b033 Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 25 PID: 15547 Comm: a.out Not tainted 5.4.0-rc2 #32 NIP: c00000000000de44 LR: c000000000034728 CTR: 0000000000000000 REGS: c00000003fe7bd70 TRAP: 0700 Not tainted (5.4.0-rc2) MSR: 8000000302a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[SE]> CR: 44000884 XER: 00000000 CFAR: c00000000000dda4 IRQMASK: 0 PACATMSCRATCH: 800000010280b033 GPR00: c000000000034728 c000000f65a17c80 c000000001662800 00007fffacf3fd78 GPR04: 0000000000001000 0000000000001000 0000000000000000 c000000f611f8af0 GPR08: 0000000000000000 0000000078006001 0000000000000000 000c000000000000 GPR12: c000000f611f84b0 c00000003ffcb200 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000f611f8140 GPR24: 0000000000000000 00007fffacf3fd68 c000000f65a17d90 c000000f611f7800 GPR28: c000000f65a17e90 c000000f65a17e90 c000000001685e18 00007fffacf3f000 NIP [c00000000000de44] fast_exception_return+0xf4/0x1b0 LR [c000000000034728] handle_rt_signal64+0x78/0xc50 Call Trace: [c000000f65a17c80] [c000000000034710] handle_rt_signal64+0x60/0xc50 (unreliable) [c000000f65a17d30] [c000000000023640] do_notify_resume+0x330/0x460 [c000000f65a17e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74 Instruction dump: 7c4ff120 e8410170 7c5a03a6 38400000 f8410060 e8010070 e8410080 e8610088 60000000 60000000 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed0989 ---[ end trace 93094aa44b442f87 ]--- The simplified sequence of events that triggers the above exception is: ... # userspace in NON-TRANSACTIONAL state tbegin # userspace in TRANSACTIONAL state signal delivery # kernelspace in SUSPENDED state handle_rt_signal64() get_tm_stackpointer() treclaim # kernelspace in NON-TRANSACTIONAL state __put_user() page fault happens. We will never get back here because of the TM Bad Thing exception. page fault handling kicks in and we voluntarily preempt ourselves do_page_fault() __schedule() __switch_to(other_task) our task is rescheduled and we recheckpoint because the thread's MSR[TS] was not cleared __switch_to(our_task) switch_to_tm() tm_recheckpoint_new_task() trechkpt # kernelspace in SUSPENDED state The page fault handling resumes, but now we are in suspended transaction state do_page_fault() completes rfid <----- trying to get back where the page fault happened (we were non-transactional back then) TM Bad Thing # illegal transition from suspended to non-transactional This patch fixes that issue by clearing the current thread's MSR[TS] just after treclaim in get_tm_stackpointer() so that we stay in non-transactional state in case we are preempted. In order to make treclaim and clearing the thread's MSR[TS] atomic from a preemption perspective when CONFIG_PREEMPT is set, preempt_disable/enable() is used. It's also necessary to save the previous value of the thread's MSR before get_tm_stackpointer() is called so that it can be exposed to the signal handler later in setup_tm_sigcontexts() to inform the userspace MSR at the moment of the signal delivery. Found with tm-signal-context-force-tm kernel selftest. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Signed-off-by:
Gustavo Luiz Duarte <gustavold@linux.ibm.com> Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200211033831.11165-1-gustavold@linux.ibm.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sam Bobroff authored
commit d4f194ed upstream. Recovering a dead PHB can currently cause a deadlock as the PCI rescan/remove lock is taken twice. This is caused as part of an existing bug in eeh_handle_special_event(). The pe is processed while traversing the PHBs even though the pe is unrelated to the loop. This causes the pe to be, incorrectly, processed more than once. Untangling this section can move the pe processing out of the loop and also outside the locked section, correcting both problems. Fixes: 2e255051 ("powerpc/eeh: Fix crash when edev->pdev changes") Cc: stable@vger.kernel.org # 5.4+ Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by:
Frederic Barrat <fbarrat@linux.ibm.com> Tested-by:
Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0547e82dbf90ee0729a2979a8cac5c91665c621f.1581051445.git.sbobroff@linux.ibm.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit a4031afb upstream. In ITLB miss handled the line supposed to clear bits 20-23 on the L2 ITLB entry is buggy and does indeed nothing, leading to undefined value which could allow execution when it shouldn't. Properly do the clearing with the relevant instruction. Fixes: 74fabcad ("powerpc/8xx: don't use r12/SPRN_SPRG_SCRATCH2 in TLB Miss handlers") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Leonardo Bras <leonardo@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4f70c2778163affce8508a210f65d140e84524b4.1581272050.git.christophe.leroy@c-s.fr Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris Brezillon authored
commit dde2bb2d upstream. We need to use the AS attached to the opened FD when dumping counters. Reported-by:
Antonio Caggiano <antonio.caggiano@collabora.com> Fixes: 7282f764 ("drm/panfrost: Implement per FD address spaces") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Tested-by:
Antonio Caggiano <antonio.caggiano@collabora.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200206141327.446127-1-boris.brezillon@collabora.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit 23954cb0 upstream. In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit 554c0a3a ("staging: Add rtl8723bs sdio wifi driver"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes: 554c0a3a ("staging: Add rtl8723bs sdio wifi driver"). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20200210180235.21691-5-Larry.Finger@lwfinger.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit ac33597c upstream. In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit 554c0a3a ("0taging: Add rtl8723bs sdio wifi driver"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes 554c0a3a ("0taging: Add rtl8723bs sdio wifi driver"). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20200210180235.21691-3-Larry.Finger@lwfinger.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit 4ddf8ab8 upstream. In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit a2c60d42 ("Add files for new driver - part 16"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes commit a2c60d42 ("Add files for new driver - part 16"). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20200210180235.21691-4-Larry.Finger@lwfinger.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit 499c405b upstream. In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit a2c60d42 ("Add files for new driver - part 16"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes: a2c60d42 ("staging: r8188eu: Add files for new driver - part 16") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20200210180235.21691-2-Larry.Finger@lwfinger.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit c14335eb upstream. Commit 83f85b8e postponed the percpu_ref_put(&se_cmd->se_lun->lun_ref) call from command completion to the time when the final command reference is dropped. That approach is not compatible with the iSCSI target driver because the iSCSI target driver keeps the command with the highest stat_sn after it has completed until the next command is received (see also iscsit_ack_from_expstatsn()). Fix this regression by reverting commit 83f85b8e. Fixes: 83f85b8e ("scsi: target/core: Inline transport_lun_remove_cmd()") Cc: Pavel Zakharov <pavel.zakharov@delphix.com> Cc: Mike Christie <mchristi@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210051202.12934-1-bvanassche@acm.org Reported-by:
Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit b32196e3 upstream. Currently the string formatting is mixing up the offset of ret and len. Re-work the code to use just len, remove ret and use scnprintf instead of snprintf and len position accumulation where required. Remove the -ve return check since scnprintf never returns a failure -ve size. Also break overly long lines to clean up checkpatch warnings. Addresses-Coverity: ("Unused value") Fixes: 1381a511 ("usb: dwc3: debug: purge usage of strcat") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210095139.328711-1-colin.king@canonical.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anurag Kumar Vulisha authored
commit 5ee85897 upstream. The current code in dwc3_gadget_ep_reclaim_completed_trb() will check for IOC/LST bit in the event->status and returns if IOC/LST bit is set. This logic doesn't work if multiple TRBs are queued per request and the IOC/LST bit is set on the last TRB of that request. Consider an example where a queued request has multiple queued TRBs and IOC/LST bit is set only for the last TRB. In this case, the core generates XferComplete/XferInProgress events only for the last TRB (since IOC/LST are set only for the last TRB). As per the logic in dwc3_gadget_ep_reclaim_completed_trb() event->status is checked for IOC/LST bit and returns on the first TRB. This leaves the remaining TRBs left unhandled. Similarly, if the gadget function enqueues an unaligned request with sglist already in it, it should fail the same way, since we will append another TRB to something that already uses more than one TRB. To aviod this, this patch changes the code to check for IOC/LST bits in TRB->ctrl instead. At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based HiKey960 after functionfs gadget added scatter-gather support around v4.20. Cc: Felipe Balbi <balbi@kernel.org> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Todd Kjos <tkjos@google.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linux USB List <linux-usb@vger.kernel.org> Cc: stable <stable@vger.kernel.org> Tested-by:
Tejas Joglekar <tejas.joglekar@synopsys.com> Reviewed-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> [jstultz: forward ported to mainline, reworded commit log, reworked to only check trb->ctrl as suggested by Felipe] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minas Harutyunyan authored
commit 9a0d6f7c upstream. SET/CLEAR_FEATURE for Remote Wakeup allowance not handled correctly. GET_STATUS handling provided not correct data on DATA Stage. Issue seen when gadget's dr_mode set to "otg" mode and connected to MacOS. Both are fixed and tested using USBCV Ch.9 tests. Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Fixes: fa389a6d ("usb: dwc2: gadget: Add remote_wakeup_allowed flag") Tested-by:
Jack Mitchell <ml@embed.me.uk> Cc: stable@vger.kernel.org Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hardik Gajjar authored
commit 1208f9e1 upstream. Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able to detect the USB3.0 mass storage devices or is detecting those as USB2.0 high speed devices. The explanation given by Renesas is that, due to a HW issue, the XHCI driver does not wake up after going to sleep on connecting a USB3.0 device. In order to mitigate that, disable the auto-suspend feature specifically for SMSC hubs from hub_probe() function, as a quirk. Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power, configurable hub controller. [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.077303] usb 5-1.1: Product: Ultra [ 74.080980] usb 5-1.1: Manufacturer: SanDisk [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550 [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 34.604430] usb 6-1.1: Product: Ultra [ 34.608110] usb 6-1.1: Manufacturer: SanDisk [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550 Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Hardik Gajjar <hgajjar@de.adit-jv.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-jv.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 8099f58f upstream. Paul Zimmerman reports that his USB Bluetooth adapter sometimes crashes following system resume, when it receives a Get-Device-Descriptor request while it is busy doing something else. Such a request was added by commit a4f55d8b ("usb: hub: Check device descriptor before resusciation"). It gets sent when the hub driver's work thread checks whether a connect-change event on an enabled port really indicates a new device has been connected, as opposed to an old device momentarily disconnecting and then reconnecting (which can happen with xHCI host controllers, since they automatically enable connected ports). The same kind of thing occurs when a port's power session is lost during system suspend. When the system wakes up it sees a connect-change event on the port, and if the child device's persist_enabled flag was set then hub_activate() sets the device's reset_resume flag as well as the port's bit in hub->change_bits. The reset-resume code then takes responsibility for checking that the same device is still attached to the port, and it does this as part of the device's resume pathway. By the time the hub driver's work thread starts up again, the device has already been fully reinitialized and is busy doing its own thing. There's no need for the work thread to do the same check a second time, and in fact this unnecessary check is what caused the problem that Paul observed. Note that performing the unnecessary check is not actually a bug. Devices are supposed to be able to send descriptors back to the host even when they are busy doing something else. The underlying cause of Paul's problem lies in his Bluetooth adapter. Nevertheless, we shouldn't perform the same check twice in a row -- and as a nice side benefit, removing the extra check allows the Bluetooth adapter to work more reliably. The work thread performs its check when it sees that the port's bit is set in hub->change_bits. In this situation that bit is interpreted as though a connect-change event had occurred on the port _after_ the reset-resume, which is not what actually happened. One possible fix would be to make the reset-resume code clear the port's bit in hub->change_bits. But it seems simpler to just avoid setting the bit during hub_activate() in the first place. That's what this patch does. (Proving that the patch is correct when CONFIG_PM is disabled requires a little thought. In that setting hub_activate() will be called only for initialization and resets, since there won't be any resumes or reset-resumes. During initialization and hub resets the hub doesn't have any child devices, and so this code path never gets executed.) Reported-and-tested-by:
Paul Zimmerman <pauldzim@gmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://marc.info/?t=157949360700001&r=1&w=2 CC: David Heinzelmann <heinzelmann.david@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe.rowland.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Dodd authored
commit b692056d upstream. Currently, the SourceControl will stay in power-down mode after resuming from suspend. This patch resets the device after suspend to power it up. Signed-off-by:
Richard Dodd <richard.o.dodd@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212142220.36892-1-richard.o.dodd@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
EJ Hsu authored
commit 3e99862c upstream. When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by:
EJ Hsu <ejh@nvidia.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit bdd1b147 upstream. This device has a broken vendor-specific altsetting for interface 1, where endpoint 0x85 is declared as an isochronous endpoint despite being used by interface 2 for audio capture. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x0926 idProduct 0x0202 bcdDevice 1.00 iManufacturer 1 Sound Devices iProduct 2 USBPre2 iSerial 3 [...] bNumConfigurations 1 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 3 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 1 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 4 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 26 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 6 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 16000 tSamFreq[ 2] 24000 tSamFreq[ 3] 32000 tSamFreq[ 4] 44100 tSamFreq[ 5] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 2 Decoded PCM samples wLockDelay 0x0000 Since commit 3e4f8e21 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing, but in this case we need to ignore the first instance in order to avoid breaking the audio capture interface. Fixes: 3e4f8e21 ("USB: core: fix check for duplicate endpoints") Cc: stable <stable@vger.kernel.org> Reported-by:
edes <edes@gmx.net> Tested-by:
edes <edes@gmx.net> Link: https://lore.kernel.org/r/20200201105829.5682c887@acme7.acmenet Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200203153830.26394-3-johan@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 73f8bda9 upstream. Add a new device quirk that can be used to blacklist endpoints. Since commit 3e4f8e21 ("USB: core: fix check for duplicate endpoints") USB core ignores any duplicate endpoints found during descriptor parsing. In order to handle devices where the first interfaces with duplicate endpoints are the ones that should have their endpoints ignored, we need to add a blacklist. Tested-by:
edes <edes@gmx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
commit dc0ffbea upstream. On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer). In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit cf0ee7c6 upstream. xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Reported-by:
Sajja Venkateswara Rao <VenkateswaraRao.Sajja@amd.com> Fixes: 47189098 ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit a3ae87dc upstream. Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 024d411e upstream. Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable runtime pm by calling xhci_pme_acpi_rtd3_enable() before usb_hcd_pci_probe() calls pci_dev_run_wake(). Otherwise usage count for the device won't be decreased, and runtime suspend is prevented. usb_hcd_pci_probe() only decreases the usage count if device can generate run-time wake-up events, i.e. when pci_dev_run_wake() returns true. This issue was exposed by pci_dev_run_wake() change in commit 8feaec33 ("PCI / PM: Always check PME wakeup capability for runtime wakeup support") and should be backported to kernels with that change Cc: <stable@vger.kernel.org> # 4.13+ Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit f148b9f4 upstream. A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by:
Rene D Obermueller <cmdrrdo@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
commit 93134df5 upstream. bb_pre_ed_rssi is an u8 rx_dm always returns negative signed values add minus operator to always yield positive. fixes issue where rx sensitivity is always set to maximum because the unsigned numbers were always greater then 100. Fixes: 63b9907f ("staging: vt6656: mac80211 conversion: create rx function.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/aceac98c-6e69-3ce1-dfec-2bf27b980221@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Suren Baghdasaryan authored
commit 6d67b029 upstream. When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Cc: stable <stable@vger.kernel.org> # 4.4,4.9,4.14,4.18,5.4 Signed-off-by:
Todd Kjos <tkjos@google.com> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 6cd1ed50 upstream. We need to make sure vc_cons[i].d is not NULL after grabbing console_lock(), or risk a crash. general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347] CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0x123/0x180 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399 RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c Modules linked in: ---[ end trace 80970faf7a67eb77 ]--- RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: stable <stable@vger.kernel.org> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Slaby authored
commit 687bff0c upstream. When pasting a selection to a vt, the task is set as INTERRUPTIBLE while waiting for a tty to unthrottle. But signals are not handled at all. Normally, this is not a problem as tty_ldisc_receive_buf receives all the goods and a user has no reason to interrupt the task. There are two scenarios where this matters: 1) when the tty is throttled and a signal is sent to the process, it spins on a CPU until the tty is unthrottled. schedule() does not really echedule, but returns immediately, of course. 2) when the sel_buffer becomes invalid, KASAN prevents any reads from it and the loop simply does not proceed and spins forever (causing the tty to throttle, but the code never sleeps, the same as above). This sometimes happens as there is a race in the sel_buffer handling code. So add signal handling to this ioctl (TIOCL_PASTESEL) and return -EINTR in case a signal is pending. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210081131.23572-1-jslaby@suse.cz Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
commit 3f4ef485 upstream. Commit a6dbe442 ("vt: perform safe console erase in the right order") provided fixes to an earlier commit by gathering all console scrollback flushing operations in a function of its own. This includes the invocation of vc_sw->con_switch() as previously done through a update_screen() call. That commit failed to carry over the con_is_visible() conditional though, as well as cursor handling, which caused problems when "\e[3J" was written to a background console. One could argue for preserving the call to update_screen(). However this does far more than we need, and it is best to remove scrollback assumptions from it. Instead let's gather the minimum needed to actually perform scrollback flushing properly in that one place. While at it, let's document the vc_sw->con_switch() side effect being relied upon. Signed-off-by:
Nicolas Pitre <nico@fluxnic.net> Reported-and-tested-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2001281205560.1655@knanqh.ubzr Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit 2e90ca68 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by:
Jordy Zomer <jordy@simplyhacker.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Duyck authored
commit a7023819 upstream. This patch is meant to address possible race conditions that can exist between network configuration and power management. A similar issue was fixed for igb in commit 9474933c ("igb: close/suspend race in netif_device_detach"). In addition it consolidates the code so that the PCI error handling code will essentially perform the power management freeze on the device prior to attempting a reset, and will thaw the device afterwards if that is what it is planning to do. Otherwise when we call close on the interface it should see it is detached and not attempt to call the logic to down the interface and free the IRQs again. From what I can tell the check that was adding the check for __E1000_DOWN in e1000e_close was added when runtime power management was added. However it should not be relevant for us as we perform a call to pm_runtime_get_sync before we call e1000_down/free_irq so it should always be back up before we call into this anyway. Reported-by:
Morumuri Srivalli <smorumu1@in.ibm.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by:
David Dai <zdai@linux.vnet.ibm.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit bab5417f upstream. Add a new device id for the 100 devie. It has 4 interfaces like the 28 and 28L devices but a larger endpoint so more I/O pins. Cc: Christoph Jung <jung@codemercs.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 5f6f8da2 upstream. Add new device ids for the 28 and 28L devices. These have 4 interfaces instead of 2, but the driver binds the same, so the driver changes are minimal. Cc: Christoph Jung <jung@codemercs.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212040422.2991-2-gregkh@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 461d8deb upstream. Add support for two OEM devices that are identical to existing IO-Warrior devices, except for the USB device id. Cc: Christoph Jung <jung@codemercs.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212040422.2991-1-gregkh@linuxfoundation.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Westerberg authored
commit 03cd45d2 upstream. The driver does not populate .reg_read callback for the non-active NVMem because the file is supposed to be write-only. However, it turns out NVMem subsystem does not yet support this and expects that the .reg_read callback is provided. If user reads the binary attribute it triggers NULL pointer dereference like this one: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: bin_attr_nvmem_read+0x64/0x80 kernfs_fop_read+0xa7/0x180 vfs_read+0xbd/0x170 ksys_read+0x5a/0xd0 do_syscall_64+0x43/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this in the driver by providing .reg_read callback that always returns an error. Reported-by:
Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Fixes: e6b245cc ("thunderbolt: Add support for host and device NVM firmware upgrade") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200213095604.1074-1-mika.westerberg@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit bd727173 upstream. If we're allocating a logged extent we attempt to insert an extent record for the file extent directly. We increase space_info->bytes_reserved, because the extent entry addition will call btrfs_update_block_group(), which will convert the ->bytes_reserved to ->bytes_used. However if we fail at any point while inserting the extent entry we will bail and leave space on ->bytes_reserved, which will trigger a WARN_ON() on umount. Fix this by pinning the space if we fail to insert, which is what happens in every other failure case that involves adding the extent entry. CC: stable@vger.kernel.org # 5.4+ Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wenwen Wang authored
commit b4a81b87 upstream. In ecryptfs_init_messaging(), if the allocation for 'ecryptfs_msg_ctx_arr' fails, the previously allocated 'ecryptfs_daemon_hash' is not deallocated, leading to a memory leak bug. To fix this issue, free 'ecryptfs_daemon_hash' before returning the error. Cc: stable@vger.kernel.org Fixes: 88b4a07e ("[PATCH] eCryptfs: Public key transport mechanism") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wenwen Wang authored
commit fe2e082f upstream. In parse_tag_1_packet(), if tag 1 packet contains a key larger than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES, no cleanup is executed, leading to a memory leak on the allocated 'auth_tok_list_item'. To fix this issue, go to the label 'out_free' to perform the cleanup work. Cc: stable@vger.kernel.org Fixes: dddfa461 ("[PATCH] eCryptfs: Public key; packet management") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roberto Sassu authored
commit dc10e418 upstream. chip->allocated_banks, an array of tpm_bank_info structures, contains the list of TPM algorithm IDs of allocated PCR banks. It also contains the corresponding ID of the crypto subsystem, so that users of the TPM driver can calculate a digest for a PCR extend operation. However, if there is no mapping between TPM algorithm ID and crypto ID, the crypto_id field of tpm_bank_info remains set to zero (the array is allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()). Zero should not be used as value for unknown mappings, as it is a valid crypto ID (HASH_ALGO_MD4). Thus, initialize crypto_id to HASH_ALGO__LAST. Cc: stable@vger.kernel.org # 5.1.x Fixes: 879b5892 ("tpm: retrieve digest size of unknown algorithms with PCR read") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by:
Petr Vorel <pvorel@suse.cz> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Holland authored
commit 96781fd9 upstream. Use the correct mask for this two-bit field. This fixes setting the DAI data format to RIGHT_J or DSP_A. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Chen-Yu Tsai <wens@csie.org> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Samuel Holland authored
commit b6570fdb upstream. The PCM runtime was freed during PMU in the case that the event hook encountered an error. However, it is also unconditionally freed during PMD. Avoid a double-free by dropping the call to kfree in the PMU hook. Fixes: a72706ed ("ASoC: codec2codec: remove ephemeral variables") Cc: stable@vger.kernel.org Signed-off-by:
Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-