- May 04, 2017
-
-
Peter Zijlstra authored
By poking at /debug/sched_features I triggered the following splat: [] ====================================================== [] WARNING: possible circular locking dependency detected [] 4.11.0-00873-g964c8b7-dirty #694 Not tainted [] ------------------------------------------------------ [] bash/2109 is trying to acquire lock: [] (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff8120cb8b>] static_key_slow_dec+0x1b/0x50 [] [] but task is already holding lock: [] (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] which lock already depends on the new lock. [] [] [] the existing dependency chain (in reverse order) is: [] [] -> #2 (&sb->s_type->i_mutex_key#4){+++++.}: [] lock_acquire+0x100/0x210 [] down_write+0x28/0x60 [] start_creating+0x5e/0xf0 [] debugfs_create_dir+0x13/0x110 [] blk_mq_debugfs_register+0x21/0x70 [] blk_mq_register_dev+0x64/0xd0 [] blk_register_queue+0x6a/0x170 [] device_add_disk+0x22d/0x440 [] loop_add+0x1f3/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] [] -> #1 (all_q_mutex){+.+.+.}: [] lock_acquire+0x100/0x210 [] __mutex_lock+0x6c/0x960 [] mutex_lock_nested+0x1b/0x20 [] blk_mq_init_allocated_queue+0x37c/0x4e0 [] blk_mq_init_queue+0x3a/0x60 [] loop_add+0xe5/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] *** DEADLOCK *** [] [] 3 locks held by bash/2109: [] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff81292bcd>] vfs_write+0x17d/0x1a0 [] #1: (debugfs_srcu){......}, at: [<ffffffff8155a90d>] full_proxy_write+0x5d/0xd0 [] #2: (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] stack backtrace: [] CPU: 9 PID: 2109 Comm: bash Not tainted 4.11.0-00873-g964c8b7-dirty #694 [] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 [] Call Trace: [] lock_acquire+0x100/0x210 [] get_online_cpus+0x2a/0x90 [] static_key_slow_dec+0x1b/0x50 [] static_key_disable+0x20/0x30 [] sched_feat_write+0x131/0x170 [] full_proxy_write+0x97/0xd0 [] __vfs_write+0x28/0x120 [] vfs_write+0xb5/0x1a0 [] SyS_write+0x49/0xa0 [] entry_SYSCALL_64_fastpath+0x23/0xc2 This is because of the cpu hotplug lock rework. Break the chain at #1 by reversing the lock acquisition order. This way i_mutex_key#4 no longer depends on cpu_hotplug_lock and things are good. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Javier González authored
Free memory correctly when an allocation fails on a loop and we free backwards previously successful allocations. Signed-off-by:
Javier González <javier@cnexlabs.com> Reviewed-by:
Matias Bjørling <matias@cnexlabs.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Javier González authored
Create nvme command before allocating a request using nvme_alloc_request, which uses the command direction. Up until now, the command has been zeroized, so all commands have been allocated as a read operation. Signed-off-by:
Javier González <javier@cnexlabs.com> Reviewed-by:
Matias Bjørling <matias@cnexlabs.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
A previous commit introduced the sync flush, which we need from internal callers like blk_mq_quiesce_queue(). However, we also call the stop helpers from drivers, particularly from ->queue_rq() when we have to stop processing for a bit. We can't block from those locations, and we don't have to guarantee that we're fully flushed. Fixes: 9f993737 ("blk-mq: unify hctx delayed_run_work and run_work") Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
- May 03, 2017
-
-
Jens Axboe authored
Get rid of the private end_io handlers and data, and just use the regular block IO path for these requests. This removes a lot of redundant code. Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
We don't decode the internal tag to the proper group or tag indx. This works fine because we have hard wired it as 0 for now, but could break if we get rid of that. Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Ming Lei authored
After queue is frozen, no request in this queue can be in use at all, so there can't be any .queue_rq() running on this queue. It isn't necessary to call blk_mq_quiesce_queue() any more, so remove it in both elevator_switch_mq() and blk_mq_update_nr_requests(). Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Fixed up the description a bit. Signed-off-by:
Jens Axboe <axboe@fb.com>
-
- May 02, 2017
-
-
Christoph Hellwig authored
Remove the request_idx parameter, which can't be used safely now that we support I/O schedulers with blk-mq. Except for a superflous check in mtip32xx it was unused anyway. Also pass the tag_set instead of just the driver data - this allows drivers to avoid some code duplication in a follow on cleanup. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
This reverts commit 4981d04d . The driver has been converted to using the proper infrastructure for issuing internal commands. This means it's now safe to use with the scheduling infrastruture, so we can now revert the change that turned off scheduling for mtip32xx. Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
We have update the troublesome driver (mtip32xx) to deal with this appropriately. So kill the hack that bypassed scheduler allocation and insertion for reserved requests. Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
The driver special cases certain things for command issue, depending on whether it's an internal command or not. Make the internal commands use the regular infrastructure for issuing IO. Since this is an 8-group souped up AHCI variant, we have to deal with NCQ vs non-queueable commands. Do this from the queue_rq handler, by backing off unless the drive is idle. Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
This is a prep patch for backoff in ->queue_rq() for non-ncq commands. Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
All callers now pass in GFP_KERNEL, get rid of the argument. Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Jens Axboe authored
All callers can safely block. Kill the atomic/block argument, and remove the argument from all callers. Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Bart Van Assche authored
Since commit 84253394 ("remove the mg_disk driver") removed the only caller of elevator_change(), also remove the elevator_change() function itself. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull second round of block layer updates from Jens Axboe: - Further fixups to the NVMe APST code, from Andy. - Various fixes for (mostly) nvme-fc, from Christoph and James. - NVMe scsi fixes from Jon and Christoph. * 'for-4.12/post-merge' of git://git.kernel.dk/linux-block: (39 commits) nvme-scsi: remove nvme_trans_security_protocol nvme-lightnvm: add missing endianess conversion in nvme_nvm_end_io nvme-scsi: Consider LBA format in IO splitting calculation nvme-fc: avoid memory corruption caused by calling nvmf_free_options() twice lpfc: Fix memory corruption of the lpfc_ncmd->list pointers nvme: Add nvme_core.force_apst to ignore the NO_APST quirk nvme: Display raw APST configuration via DYNAMIC_DEBUG nvme: Fix APST comment lpfc revison 11.2.0.12 Fix Express lane queue creation. Update ABORT processing for NVMET. Fix implicit logo and RSCN handling for NVMET Add Fabric assigned WWN support. Fix max_sgl_segments settings for NVME / NVMET Fix crash after issuing lip reset Fix driver load issues when MRQ=8 Remove hba lock from NVMET issue WQE. Fix nvme initiator handling when not enabled. Fix driver usage of 128B WQEs when WQ_CREATE is V1. Fix driver unload/reload operation. ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer updates from Jens Axboe: - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ was initially a fork of CFQ, but subsequently changed to implement fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant to be used on desktop type single drives, providing good fairness. From Paolo. - Add Kyber IO scheduler. This is a full multiqueue aware scheduler, using a scalable token based algorithm that throttles IO based on live completion IO stats, similary to blk-wbt. From Omar. - A series from Jan, moving users to separately allocated backing devices. This continues the work of separating backing device life times, solving various problems with hot removal. - A series of updates for lightnvm, mostly from Javier. Includes a 'pblk' target that exposes an open channel SSD as a physical block device. - A series of fixes and improvements for nbd from Josef. - A series from Omar, removing queue sharing between devices on mostly legacy drivers. This helps us clean up other bits, if we know that a queue only has a single device backing. This has been overdue for more than a decade. - Fixes for the blk-stats, and improvements to unify the stats and user windows. This both improves blk-wbt, and enables other users to register a need to receive IO stats for a device. From Omar. - blk-throttle improvements from Shaohua. This provides a scalable framework for implementing scalable priotization - particularly for blk-mq, but applicable to any type of block device. The interface is marked experimental for now. - Bucketized IO stats for IO polling from Stephen Bates. This improves efficiency of polled workloads in the presence of mixed block size IO. - A few fixes for opal, from Scott. - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics. From a variety of folks, mostly Sagi and James Smart. - A series from Bart, improving our exposed info and capabilities from the blk-mq debugfs support. - A series from Christoph, cleaning up how handle WRITE_ZEROES. - A series from Christoph, cleaning up the block layer handling of how we track errors in a request. On top of being a nice cleanup, it also shrinks the size of struct request a bit. - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was never used by platforms, and the latter has outlived it's usefulness. - Various little bug fixes and cleanups from a wide variety of folks. * 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits) block: hide badblocks attribute by default blk-mq: unify hctx delay_work and run_work block: add kblock_mod_delayed_work_on() blk-mq: unify hctx delayed_run_work and run_work nbd: fix use after free on module unload MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler blk-mq-sched: alloate reserved tags out of normal pool mtip32xx: use runtime tag to initialize command header scsi: Implement blk_mq_ops.show_rq() blk-mq: Add blk_mq_ops.show_rq() blk-mq: Show operation, cmd_flags and rq_flags names blk-mq: Make blk_flags_show() callers append a newline character blk-mq: Move the "state" debugfs attribute one level down blk-mq: Unregister debugfs attributes earlier blk-mq: Only unregister hctxs for which registration succeeded blk-mq-debugfs: Rename functions for registering and unregistering the mq directory blk-mq: Let blk_mq_debugfs_register() look up the queue name blk-mq: Register <dev>/queue/mq after having registered <dev>/queue ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset ide-pm: always pass 0 error to __blk_end_request_all ..
-
- May 01, 2017
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "The final fixes for 4.11: - prevent a triple fault with function graph tracing triggered via suspend to ram - prevent optimizing for size when function graph tracing is enabled and the compiler does not support -mfentry - prevent mwaitx() being called with a zero timeout as mwaitx() might never return. Observed on the new Ryzen CPUs" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Prevent timer value 0 for MWAITX x86/build: convert function graph '-Os' error to warning ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix for a cputime accounting regression which got introduced in the 4.11 cycle" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix ksoftirqd cputime accounting regression
-
- Apr 30, 2017
-
-
Janakarajan Natarajan authored
Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.com Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull iov iter fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a braino in ITER_PIPE iov_iter_revert()
-
Al Viro authored
Fixes: 27c0e374 Tested-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- Apr 29, 2017
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One odd config build fix for a recent Allwinner clock driver change that got merged. The common code called code in another file that wasn't always built. This just forces it on so people don't run into this bad configuration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: always select CCU_GATE
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a couple more stragglers, I really hope this is it. 1) Don't let frags slip down into the GRO segmentation handlers, from Steffen Klassert. 2) Truesize under-estimation triggers warnings in TCP over loopback with socket filters, 2 part fix from Eric Dumazet. 3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal, from Paolo Abeni. 4) If we flush the XFRM policy after garbage collection, it doesn't work because stray entries can be created afterwards. Fix from Xin Long. 5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan. 6) Fix GRO regression with IPSEC when netfilter is disabled, from Sabrina Dubroca. 7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: hso: register netdev later to avoid a race condition net: adjust skb->truesize in ___pskb_trim() tcp: do not underestimate skb->truesize in tcp_trim_head() bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal ipv4: Don't pass IP fragments to upper layer GRO handlers. cpsw/netcp: refine cpts dependency tipc: close the connection if protocol messages contain errors tipc: improve error validations for sockets in CONNECTING state tipc: Fix missing connection request handling xfrm: fix GRO for !CONFIG_NETFILTER xfrm: do the garbage collection after flushing policy
-
Andreas Kemnade authored
If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket. As we did recently in commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(), via a call to skb_condense(). If all frags were freed, then skb->truesize can be recomputed. This call can be done if skb is not yet owned, or destructor is sock_edemux(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket over loopback interface. I believe one issue with looped skbs is that tcp_trim_head() can end up producing skb with under estimated truesize. It hardly matters for normal conditions, since packets sent over loopback are never truncated. Bytes trimmed from skb->head should not change skb truesize, since skb->head is not reallocated. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
On slave list updates, the bonding driver computes its hard_header_len as the maximum of all enslaved devices's hard_header_len. If the slave list is empty, e.g. on last enslaved device removal, ETH_HLEN is used. Since the bonding header_ops are set only when the first enslaved device is attached, the above can lead to header_ops->create() being called with the wrong skb headroom in place. If bond0 is configured on top of ipoib devices, with the following commands: ifup bond0 for slave in $BOND_SLAVES_LIST; do ip link set dev $slave nomaster done ping -c 1 <ip on bond0 subnet> we will obtain a skb_under_panic() with a similar call trace: skb_push+0x3d/0x40 push_pseudo_header+0x17/0x30 [ib_ipoib] ipoib_hard_header+0x4e/0x80 [ib_ipoib] arp_create+0x12f/0x220 arp_send_dst.part.19+0x28/0x50 arp_solicit+0x115/0x290 neigh_probe+0x4d/0x70 __neigh_event_send+0xa7/0x230 neigh_resolve_output+0x12e/0x1c0 ip_finish_output2+0x14b/0x390 ip_finish_output+0x136/0x1e0 ip_output+0x76/0xe0 ip_local_out+0x35/0x40 ip_send_skb+0x19/0x40 ip_push_pending_frames+0x33/0x40 raw_sendmsg+0x7d3/0xb50 inet_sendmsg+0x31/0xb0 sock_sendmsg+0x38/0x50 SYSC_sendto+0x102/0x190 SyS_sendto+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 This change addresses the issue avoiding updating the bonding device hard_header_len when the slaves list become empty, forbidding to shrink it below the value used by header_ops->create(). The bug is there since commit 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") but the panic can be triggered only since commit fc791b63 ("IB/ipoib: move back IB LL address into the hard header"). Reported-by:
Norbert P <noe@physik.uzh.ch> Fixes: 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steffen Klassert authored
Upper layer GRO handlers can not handle IP fragments, so exit GRO processing in this case. This fixes ESP GRO because the packet must be reassembled before we can decapsulate, otherwise we get authentication failures. It also aligns IPv4 to IPv6 where packets with fragmentation headers are not passed to upper layer GRO handlers. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Tony Lindgren reports a kernel oops that resulted from my compile-time fix on the default config. This shows two problems: a) configurations that did not already enable PTP_1588_CLOCK will now miss the cpts driver b) when cpts support is disabled, the driver crashes. This is a preexisting problem that we did not notice before my patch. While the second problem is still being investigated, this modifies the dependencies again, getting us back to the original state, with another 'select NET_PTP_CLASSIFY' added in to avoid the original link error we got, and the 'depends on POSIX_TIMERS' to hide the CPTS support when turning it on would be useless. Cc: stable@vger.kernel.org # 4.11 needs this Fixes: 07fef362 ("cpsw/netcp: cpts depends on posix_timers") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-04-28 1) Do garbage collecting after a policy flush to remove old bundles immediately. From Xin Long. 2) Fix GRO if netfilter is not defined. From Sabrina Dubroca. Please pull or let me know if there are problems. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "Yet another quirk to i8042 to get touchpad recognized on some laptops" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo P650RS to the i8042 reset list
-
Arnd Bergmann authored
When the base driver is enabled but all SoC specific drivers are turned off, we now get a build error after code was added to always refer to the clk gates: drivers/clk/built-in.o: In function `ccu_pll_notifier_cb': :(.text+0x154f8): undefined reference to `ccu_gate_helper_disable' :(.text+0x15504): undefined reference to `ccu_gate_helper_enable' This changes the Kconfig to always require the gate code to be built-in when CONFIG_SUNXI_CCU is set. Fixes: 02ae2bc6 ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fix from Chris Mason: "We have one more fix for btrfs. This gets rid of a new WARN_ON from rc1 that ended up making more noise than we really want. The larger fix for the underflow got delayed a bit and it's better for now to put it under CONFIG_BTRFS_DEBUG" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: qgroup: move noisy underflow warning to debugging build
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: fix hanging socket connections This patch series contains fixes for the socket layer to prevent hanging / stale connections. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Parthasarathy Bhuvaragan authored
When a socket is shutting down, we notify the peer node about the connection termination by reusing an incoming message if possible. If the last received message was a connection acknowledgment message, we reverse this message and set the error code to TIPC_ERR_NO_PORT and send it to peer. In tipc_sk_proto_rcv(), we never check for message errors while processing the connection acknowledgment or probe messages. Thus this message performs the usual flow control accounting and leaves the session hanging. In this commit, we terminate the connection when we receive such error messages. Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Parthasarathy Bhuvaragan authored
Until now, the checks for sockets in CONNECTING state was based on the assumption that the incoming message was always from the peer's accepted data socket. However an application using a non-blocking socket sends an implicit connect, this socket which is in CONNECTING state can receive error messages from the peer's listening socket. As we discard these messages, the application socket hangs as there due to inactivity. In addition to this, there are other places where we process errors but do not notify the user. In this commit, we process such incoming error messages and notify our users about them using sk_state_change(). Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Parthasarathy Bhuvaragan authored
In filter_connect, we use waitqueue_active() to check for any connections to wakeup. But waitqueue_active() is missing memory barriers while accessing the critical sections, leading to inconsistent results. In this commit, we replace this with an SMP safe wq_has_sleeper() using the generic socket callback sk_data_ready(). Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Apr 28, 2017
-
-
Dan Williams authored
Commit 99e6608c "block: Add badblock management for gendisks" allowed for drivers like pmem and software-raid to advertise a list of bad media areas. However, it inadvertently added a 'badblocks' to all block devices. Lets clean this up by having the 'badblocks' attribute not be visible when the driver has not populated a 'struct badblocks' instance in the gendisk. Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Tested-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-