- Jun 18, 2016
-
-
Chris Mason authored
Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
-
Chandan Rajendra authored
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence restricting stripesize to be equal to sectorsize would cause super block validation to return an error on architectures where PAGE_SIZE is not equal to 4096. Hence as a workaround, this commit allows stripesize to be set to 4096 bytes. Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
Introduced in 2c1984f2 ("btrfs: build fixup for qgroup_account_snapshot") as temporary bisectability build fixup. Signed-off-by:
David Sterba <dsterba@suse.com>
-
David Sterba authored
We've renamed btrfs_std_error, this one is left from last merge. Signed-off-by:
David Sterba <dsterba@suse.com>
-
Zygo Blaxell authored
This fixes a problem introduced in commit 2f3165ec "btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes". open_ctree eventually calls btrfs_replay_log which in turn calls btrfs_commit_super which tries to lock the cleaner_mutex, causing a recursive mutex deadlock during mount. Instead of playing whack-a-mole trying to keep up with all the functions that may want to lock cleaner_mutex, put all the cleaner_mutex lockers back where they were, and attack the problem more directly: keep cleaner_kthread asleep until the filesystem is mounted. When filesystems are mounted read-only and later remounted read-write, open_ctree did not set fs_info->open and neither does anything else. Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs nor cleaner_kthread get confused by the common case of "/" filesystem read-only mount followed by read-write remount. Signed-off-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Josef Bacik authored
This is just a screwup for developers, so change it to an ASSERT() so developers notice when things go wrong and deal with the error appropriately if ASSERT() isn't enabled. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Jeff Mahoney authored
The test for !trans->blocks_used in btrfs_abort_transaction is insufficient to determine whether it's safe to drop the transaction handle on the floor. btrfs_cow_block, informed by should_cow_block, can return blocks that have already been CoW'd in the current transaction. trans->blocks_used is only incremented for new block allocations. If an operation overlaps the blocks in the current transaction entirely and must abort the transaction, we'll happily let it clean up the trans handle even though it may have modified the blocks and will commit an incomplete operation. In the long-term, I'd like to do closer tracking of when the fs is actually modified so we can still recover as gracefully as possible, but that approach will need some discussion. In the short term, since this is the only code using trans->blocks_used, let's just switch it to a bool indicating whether any blocks were used and set it when should_cow_block returns false. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Liu Bo authored
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer via alloc_extent_buffer(). An unaligned eb can have more pages than it should have, which ends up extent buffer's leak or some corrupted content in extent buffer. This adds a warning to let us quickly know what was happening. Now that alloc_extent_buffer() no more returns NULL, this changes its caller and callers of its caller to match with the new error handling. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Heinrich Schuchardt authored
Component mirror_num of struct btrfsic_block is defined as unsigned int. Use %u as format specifier. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- Jun 09, 2016
-
-
Chris Mason authored
Merge branch 'misc-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
-
Chris Mason authored
Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
-
- Jun 06, 2016
-
-
Feifei Xu authored
In __test_eb_bitmaps(), we write random data to a bitmap. Then copy the bitmap to another bitmap that resides inside an extent buffer. Later we verify the values of corresponding bits in the bitmap and the bitmap inside the extent buffer. However, extent_buffer_test_bit() reads in byte granularity while test_bit() reads in unsigned long granularity. Hence we end up comparing wrong bits on big-endian systems such as ppc64. This commit fixes the issue by reading the bitmap in byte granularity. Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Feifei Xu authored
With 64K sectorsize, 1G sized block group cannot span across bitmaps. To execute test_bitmaps() function, this commit allocates "BITS_PER_BITMAP * sectorsize + PAGE_SIZE" sized block group. Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Feifei Xu authored
This commit replaces numerical constants with appropriate preprocessor macros. Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Feifei Xu authored
To test all possible sectorsizes, this commit adds a sectorsize array. This commit executes the tests for all possible sectorsizes and nodesizes. Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Feifei Xu authored
On ppc64, PAGE_SIZE is 64k which is same as BTRFS_MAX_METADATA_BLOCKSIZE. In such a scenario, we will never be able to have an extent buffer containing more than one page. Hence in such cases this commit does not execute the page straddling tests. Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Jeff Mahoney authored
Since several architectures support hardware-accelerated crc32c calculation, it would be nice to confirm that btrfs is actually using it. We can see an elevated use count for the module, but it doesn't actually show who the users are. This patch simply prints the name of the driver after successfully initializing the shash. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> [ added a helper and used in module load-time message ] Signed-off-by:
David Sterba <dsterba@suse.com>
-
Liu Bo authored
To prevent fuzzed filesystem images from panic the whole system, we need various validation checks to refuse to mount such an image if btrfs finds any invalid value during loading chunks, including both sys_array and regular chunks. Note that these checks may not be sufficient to cover all corner cases, feel free to add more checks. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Liu Bo authored
This adds validation checks for super_total_bytes, super_bytes_used and super_stripesize, super_num_devices. Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Reported-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Liu Bo authored
We set uptodate flag to pages in the temporary sys_array eb, but do not clear the flag after free eb. As the special btree inode may still hold a reference on those pages, the uptodate flag can remain alive in them. If btrfs_super_chunk_root has been intentionally changed to the offset of this sys_array eb, reading chunk_root will read content of sys_array and it will skip our beautiful checks in btree_readpage_end_io_hook() because of "pages of eb are uptodate => eb is uptodate" This adds the 'clear uptodate' part to force it to read from disk. Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- Jun 04, 2016
-
-
Chris Mason authored
When dealing with inline extents, btrfs_get_extent will incorrectly try to insert a duplicate extent_map. The dup hits -EEXIST from add_extent_map, but then we try to merge with the existing one and end up trying to insert a zero length extent_map. This actually works most of the time, except when there are extent maps past the end of the inline extent. rocksdb will trigger this sometimes because it preallocates an extent and then truncates down. Josef made a script to trigger with xfs_io: #!/bin/bash xfs_io -f -c "pwrite 0 1000" inline xfs_io -c "falloc -k 4k 1M" inline xfs_io -c "pread 0 1000" -c "fadvise -d 0 1000" -c "pread 0 1000" inline xfs_io -c "fadvise -d 0 1000" inline cat inline You'll get EIOs trying to read inline after this because add_extent_map is returning EEXIST Signed-off-by:
Chris Mason <clm@fb.com>
-
- Jun 03, 2016
-
-
Feifei Xu authored
self-tests code assumes 4k as the sectorsize and nodesize. This commit fix hardcoded 4K. Enables the self-tests code to be executed on non-4k page sized systems (e.g. ppc64). Reviewed-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Feifei Xu authored
On ppc64, bytes_per_bitmap will be (65536*8*65536). Hence append UL to fix integer overflow. Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Feifei Xu authored
On a ppc64 machine using 64K as the block size, assume that the RB tree at btrfs_free_space_ctl->free_space_offset contains following two entries: 1. A bitmap entry having an offset value of 0 and having the bits corresponding to the address range [128M+512K, 128M+768K] set. 2. An extent entry corresponding to the address range [128M-256K, 128M-128K] In such a scenario, test_check_exists() invoked for checking the existence of address range [128M+768K, 256M] can lead to an infinite loop as explained below: - Checking for the extent entry fails. - Checking for a bitmap entry results in the free space info in range [128M+512K, 128M+768K] beng returned. - rb_prev(info) returns NULL because the bitmap entry starting from offset 0 comes first in the RB tree. - current_node = bitmap node. - while (current_node) tmp = rb_next(bitmap_node);/*tmp is extent based free space entry*/ Since extent based free space entry's last address is smaller than the address being searched for (i.e. 128M+768K) we incorrectly again obtain the extent node as the "next right node" of the RB tree and thus end up looping infinitely. This patch fixes the issue by checking the "tmp" variable which point to the most recently searched free space node. Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Feifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- Jun 02, 2016
-
-
Chris Mason authored
Merge branch 'dev-replace-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.7
-
- Jun 01, 2016
-
-
Josef Bacik authored
We still need to call btrfs_end_transaction if we call btrfs_abort_transaction, otherwise we hang and make me super grumpy. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- May 31, 2016
-
-
Filipe Manana authored
While we are finishing a device replace operation we can have a concurrent task trying to do a read repair operation, in which case it will call btrfs_map_block() to get a struct btrfs_bio which can have a stripe that points to the source device of the device replace operation. This allows for the read repair task to dereference the stripe's device pointer after the device replace operation has freed the source device, resulting in an invalid memory access. This is similar to the problem solved by my previous patch in the same series and named "Btrfs: fix race between device replace and discard". So fix this by surrounding the call to btrfs_map_block() and the code that uses the returned struct btrfs_bio with calls to btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), giving the proper serialization with the finishing phase of the device replace operation. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Filipe Manana authored
While we are finishing a device replace operation, we can make a discard operation (fs mounted with -o discard) do an invalid memory access like the one reported by the following trace: [ 3206.384654] general protection fault: 0000 [#1] PREEMPT SMP [ 3206.387520] Modules linked in: dm_mod btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis psmouse tpm ppdev sg parport_pc evdev i2c_piix4 parport processor serio_raw i2c_core pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci virtio_ring scsi_mod e1000 virtio floppy [last unloaded: btrfs] [ 3206.388595] CPU: 14 PID: 29194 Comm: fsstress Not tainted 4.6.0-rc7-btrfs-next-29+ #1 [ 3206.388595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 3206.388595] task: ffff88017ace0100 ti: ffff880171b98000 task.ti: ffff880171b98000 [ 3206.388595] RIP: 0010:[<ffffffff8124d233>] [<ffffffff8124d233>] blkdev_issue_discard+0x5c/0x2a7 [ 3206.388595] RSP: 0018:ffff880171b9bb80 EFLAGS: 00010246 [ 3206.388595] RAX: ffff880171b9bc28 RBX: 000000000090d000 RCX: 0000000000000000 [ 3206.388595] RDX: ffffffff82fa1b48 RSI: ffffffff8179f46c RDI: ffffffff82fa1b48 [ 3206.388595] RBP: ffff880171b9bcc0 R08: 0000000000000000 R09: 0000000000000001 [ 3206.388595] R10: ffff880171b9bce0 R11: 000000000090f000 R12: ffff880171b9bbe8 [ 3206.388595] R13: 0000000000000010 R14: 0000000000004868 R15: 6b6b6b6b6b6b6b6b [ 3206.388595] FS: 00007f6182e4e700(0000) GS:ffff88023fdc0000(0000) knlGS:0000000000000000 [ 3206.388595] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3206.388595] CR2: 00007f617c2bbb18 CR3: 000000017ad9c000 CR4: 00000000000006e0 [ 3206.388595] Stack: [ 3206.388595] 0000000000004878 0000000000000000 0000000002400040 0000000000000000 [ 3206.388595] 0000000000000000 ffff880171b9bbe8 ffff880171b9bbb0 ffff880171b9bbb0 [ 3206.388595] ffff880171b9bbc0 ffff880171b9bbc0 ffff880171b9bbd0 ffff880171b9bbd0 [ 3206.388595] Call Trace: [ 3206.388595] [<ffffffffa042899e>] btrfs_issue_discard+0x12f/0x143 [btrfs] [ 3206.388595] [<ffffffffa042899e>] ? btrfs_issue_discard+0x12f/0x143 [btrfs] [ 3206.388595] [<ffffffffa042e862>] btrfs_discard_extent+0x87/0xde [btrfs] [ 3206.388595] [<ffffffffa04303b5>] btrfs_finish_extent_commit+0xb2/0x1df [btrfs] [ 3206.388595] [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b [ 3206.388595] [<ffffffffa04464c4>] btrfs_commit_transaction+0x7fc/0x980 [btrfs] [ 3206.388595] [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b [ 3206.388595] [<ffffffffa0459af6>] btrfs_sync_file+0x38f/0x428 [btrfs] [ 3206.388595] [<ffffffff811a8292>] vfs_fsync_range+0x8c/0x9e [ 3206.388595] [<ffffffff811a82c0>] vfs_fsync+0x1c/0x1e [ 3206.388595] [<ffffffff811a8417>] do_fsync+0x31/0x4a [ 3206.388595] [<ffffffff811a8637>] SyS_fsync+0x10/0x14 [ 3206.388595] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 3206.388595] [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14 [ 3206.388595] [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa This happens because when we call btrfs_map_block() from btrfs_discard_extent() to get a btrfs_bio structure, the device replace operation has not finished yet, but before we use the device of one of the stripes from the returned btrfs_bio structure, the device object is freed. This is illustrated by the following diagram. CPU 1 CPU 2 btrfs_dev_replace_start() (...) btrfs_dev_replace_finishing() btrfs_start_transaction() btrfs_commit_transaction() (...) btrfs_sync_file() btrfs_start_transaction() (...) btrfs_commit_transaction() btrfs_finish_extent_commit() btrfs_discard_extent() btrfs_map_block() --> returns a struct btrfs_bio with a stripe that has a device field pointing to source device of the replace operation (the device that is being replaced) mutex_lock(&uuid_mutex) mutex_lock(&fs_info->fs_devices->device_list_mutex) mutex_lock(&fs_info->chunk_mutex) btrfs_dev_replace_update_device_in_mapping_tree() --> iterates the mapping tree and for each extent map that has a stripe pointing to the source device, it updates the stripe to point to the target device instead btrfs_rm_dev_replace_blocked() --> waits for fs_info->bio_counter to go down to 0 btrfs_rm_dev_replace_remove_srcdev() --> removes source device from the list of devices mutex_unlock(&fs_info->chunk_mutex) mutex_unlock(&fs_info->fs_devices->device_list_mutex) mutex_unlock(&uuid_mutex) btrfs_rm_dev_replace_free_srcdev() --> frees the source device --> iterates over all stripes of the returned struct btrfs_bio --> for each stripe it dereferences its device pointer --> it ends up finding a pointer to the device used as the source device for the replace operation and that was already freed So fix this by surrounding the call to btrfs_map_block(), and the code that uses the returned struct btrfs_bio, with calls to btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), so that the finishing phase of the device replace operation blocks until the the bio counter decreases to zero before it frees the source device. This is the same approach we do at btrfs_map_bio() for example. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
- May 30, 2016
-
-
Filipe Manana authored
While iterating and copying extents from the source device, the device replace code keeps adjusting a left cursor that is used to make sure that once we finish processing a device extent, any future writes to extents from the corresponding block group will get into both the source and target devices. This left cursor is also used for resuming the device replace operation at mount time. However using this left cursor to decide whether writes go into both devices or only the source device is not enough to guarantee we don't miss copying extents into the target device. There are two cases where the current approach fails. The first one is related to when there are holes in the device and they get allocated for new block groups while the device replace operation is iterating the device extents (more on this explained below). The second one is that when that loop over the device extents finishes, we start dellaloc, wait for all ordered extents and then commit the current transaction, we might have got new block groups allocated that are now using a device extent that has an offset greater then or equals to the value of the left cursor, in which case writes to extents belonging to these new block groups will get issued only to the source device. For the first case where the current approach of using a left cursor fails, consider the source device currently has the following layout: [ extent bg A ] [ hole, unallocated space ] [extent bg B ] 3Gb 4Gb 5Gb While we are iterating the device extents from the source device using the commit root of the device tree, the following happens: CPU 1 CPU 2 <we are at transaction N> scrub_enumerate_chunks() --> searches the device tree for extents belonging to the source device using the device tree's commit root --> 1st iteration finds extent belonging to block group A --> sets block group A to RO mode (btrfs_inc_block_group_ro) --> sets cursor left to found_key.offset which is 3Gb --> scrub_chunk() starts copies all allocated extents from block group's A stripe at source device into target device btrfs_alloc_chunk() --> allocates device extent in the range [4Gb, 5Gb[ from the source device for a new block group C extent allocated from block group C for a direct IO, buffered write or btree node/leaf extent is written to, perhaps in response to a writepages() call from the VM or directly through direct IO the write is made only against the source device and not against the target device because the extent's offset is in the interval [4Gb, 5Gb[ which is larger then the value of cursor_left (3Gb) --> scrub_chunks() finishes --> updates left cursor from 3Gb to 4Gb --> btrfs_dec_block_group_ro() sets block group A back to RW mode <we are still at transaction N> --> 2nd iteration finds extent belonging to block group B - it did not find the new extent in the range [4Gb, 5Gb[ for block group C because we are using the device tree's commit root or even because the block group's items are not all yet inserted in the respective btrees, that is, the block group is still attached to some transaction handle's new_bgs list and btrfs_create_pending_block_groups() was not called yet against that transaction handle, so the device extent items were not yet inserted into the devices tree <we are still at transaction N> --> so we end not copying anything from the newly allocated device extent from the source device to the target device So fix this by making __btrfs_map_block() always redirect writes to the target device as well, independently of the left cursor's value. With this change the left cursor is now used only for the purpose of tracking progress and allow a mount operation to resume a device replace. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Filipe Manana authored
After it finishes processing a device extent, the device replace code sets back the block group to RW mode and then after that it sets the left cursor to match the logical end address of the block group, so that future writes into extents belonging to the block group go both the source (old) and target (new) devices. However from the moment we turn the block group back to RW mode we have a short time window, that lasts until we update the left cursor's value, where extents can be allocated from the block group and written to, in which case they will not be copied/written to the target (new) device. Fix this by updating the left cursor's value before turning the block group back to RW mode. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Filipe Manana authored
We were assigning new values to fields of the device replace object without holding the respective lock after processing each device extent. This is important for the left cursor field which can be accessed by a concurrent task running __btrfs_map_block (which, correctly, takes the device replace lock). So change these fields while holding the device replace lock. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Filipe Manana authored
When we do a device replace, for each device extent we find from the source device, we set the corresponding block group to readonly mode to prevent writes into it from happening while we are copying the device extent from the source to the target device. However just before we set the block group to readonly mode some concurrent task might have already allocated an extent from it or decided it could perform a nocow write into one of its extents, which can make the device replace process to miss copying an extent since it uses the extent tree's commit root to search for extents and only once it finishes searching for all extents belonging to the block group it does set the left cursor to the logical end address of the block group - this is a problem if the respective ordered extents finish while we are searching for extents using the extent tree's commit root and no transaction commit happens while we are iterating the tree, since it's the delayed references created by the ordered extents (when they complete) that insert the extent items into the extent tree (using the non-commit root of course). Example: CPU 1 CPU 2 btrfs_dev_replace_start() btrfs_scrub_dev() scrub_enumerate_chunks() --> finds device extent belonging to block group X <transaction N starts> starts buffered write against some inode writepages is run against that inode forcing dellaloc to run btrfs_writepages() extent_writepages() extent_write_cache_pages() __extent_writepage() writepage_delalloc() run_delalloc_range() cow_file_range() btrfs_reserve_extent() --> allocates an extent from block group X (which is not yet in RO mode) btrfs_add_ordered_extent() --> creates ordered extent Y flush_epd_write_bio() --> bio against the extent from block group X is submitted btrfs_inc_block_group_ro(bg X) --> sets block group X to readonly scrub_chunk(bg X) scrub_stripe(device extent from srcdev) --> keeps searching for extent items belonging to the block group using the extent tree's commit root --> it never blocks due to fs_info->scrub_pause_req as no one tries to commit transaction N --> copies all extents found from the source device into the target device --> finishes search loop bio completes ordered extent Y completes and creates delayed data reference which will add an extent item to the extent tree when run (typically at transaction commit time) --> so the task doing the scrub/device replace at CPU 1 misses this and does not copy this extent into the new/target device btrfs_dec_block_group_ro(bg X) --> turns block group X back to RW mode dev_replace->cursor_left is set to the logical end offset of block group X So fix this by waiting for all cow and nocow writes after setting a block group to readonly mode. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Filipe Manana authored
When it's finishing, the device replace code iterates all extent maps representing block group and for each one that has a stripe that refers to the source device, it replaces its device with the target device. However when it replaces the source device with the target device it, the target device still has an ID of 0ULL (BTRFS_DEV_REPLACE_DEVID), only after its ID is changed to match the one from the source device. This leads to races with the chunk removal code that can temporarly see a device with an ID of 0ULL and then attempt to use that ID to remove items from the device tree and fail, causing a transaction abort: [ 9238.594364] BTRFS info (device sdf): dev_replace from /dev/sdf (devid 3) to /dev/sde finished [ 9238.594377] ------------[ cut here ]------------ [ 9238.594402] WARNING: CPU: 14 PID: 21566 at fs/btrfs/volumes.c:2771 btrfs_remove_chunk+0x2e5/0x793 [btrfs] [ 9238.594403] BTRFS: Transaction aborted (error 1) [ 9238.594416] Modules linked in: btrfs crc32c_generic acpi_cpufreq xor tpm_tis tpm raid6_pq ppdev parport_pc processor psmouse parport i2c_piix4 evdev sg i2c_core se rio_raw pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio e1000 scsi_mod fl oppy [last unloaded: btrfs] [ 9238.594418] CPU: 14 PID: 21566 Comm: btrfs-cleaner Not tainted 4.6.0-rc7-btrfs-next-29+ #1 [ 9238.594419] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 9238.594421] 0000000000000000 ffff88017f1dbc60 ffffffff8126b42c ffff88017f1dbcb0 [ 9238.594422] 0000000000000000 ffff88017f1dbca0 ffffffff81052b14 00000ad37f1dbd18 [ 9238.594423] 0000000000000001 ffff88018068a558 ffff88005c4b9c00 ffff880233f60db0 [ 9238.594424] Call Trace: [ 9238.594428] [<ffffffff8126b42c>] dump_stack+0x67/0x90 [ 9238.594430] [<ffffffff81052b14>] __warn+0xc2/0xdd [ 9238.594432] [<ffffffff81052b7a>] warn_slowpath_fmt+0x4b/0x53 [ 9238.594434] [<ffffffff8116c311>] ? kmem_cache_free+0x128/0x188 [ 9238.594450] [<ffffffffa04d43f5>] btrfs_remove_chunk+0x2e5/0x793 [btrfs] [ 9238.594452] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc [ 9238.594464] [<ffffffffa04a26fa>] btrfs_delete_unused_bgs+0x317/0x382 [btrfs] [ 9238.594476] [<ffffffffa04a961d>] cleaner_kthread+0x1ad/0x1c7 [btrfs] [ 9238.594489] [<ffffffffa04a9470>] ? btree_invalidatepage+0x8e/0x8e [btrfs] [ 9238.594490] [<ffffffff8106f403>] kthread+0xd4/0xdc [ 9238.594494] [<ffffffff8149e242>] ret_from_fork+0x22/0x40 [ 9238.594495] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286 [ 9238.594496] ---[ end trace 183efbe50275f059 ]--- The sequence of steps leading to this is like the following: CPU 1 CPU 2 btrfs_dev_replace_finishing() at this point dev_replace->tgtdev->devid == BTRFS_DEV_REPLACE_DEVID (0ULL) ... btrfs_start_transaction() btrfs_commit_transaction() btrfs_delete_unused_bgs() btrfs_remove_chunk() looks up for the extent map corresponding to the chunk lock_chunks() (chunk_mutex) check_system_chunk() unlock_chunks() (chunk_mutex) locks fs_info->chunk_mutex btrfs_dev_replace_update_device_in_mapping_tree() --> iterates fs_info->mapping_tree and replaces the device in every extent map's map->stripes[] with dev_replace->tgtdev, which still has an id of 0ULL (BTRFS_DEV_REPLACE_DEVID) iterates over all stripes from the extent map --> calls btrfs_free_dev_extent() passing it the target device that still has an ID of 0ULL --> btrfs_free_dev_extent() fails --> aborts current transaction finishes setting up the target device, namely it sets tgtdev->devid to the value of srcdev->devid (which is necessarily > 0) frees the srcdev unlocks fs_info->chunk_mutex So fix this by taking the device list mutex while processing the stripes for the chunk's extent map. This is similar to the race between device replace and block group creation that was fixed by commit 50460e37 ("Btrfs: fix race when finishing dev replace leading to transaction abort"). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Filipe Manana authored
The list of devices is protected by the device_list_mutex and the device replace code, in its finishing phase correctly takes that mutex before removing the source device from that list. However the readahead code was iterating that list without acquiring the respective mutex leading to crashes later on due to invalid memory accesses: [125671.831036] general protection fault: 0000 [#1] PREEMPT SMP [125671.832129] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis tpm ppdev evdev parport_pc psmouse sg parport processor ser [125671.834973] CPU: 10 PID: 19603 Comm: kworker/u32:19 Tainted: G W 4.6.0-rc7-btrfs-next-29+ #1 [125671.834973] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [125671.834973] Workqueue: btrfs-readahead btrfs_readahead_helper [btrfs] [125671.834973] task: ffff8801ac520540 ti: ffff8801ac918000 task.ti: ffff8801ac918000 [125671.834973] RIP: 0010:[<ffffffff81270479>] [<ffffffff81270479>] __radix_tree_lookup+0x6a/0x105 [125671.834973] RSP: 0018:ffff8801ac91bc28 EFLAGS: 00010206 [125671.834973] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b6a RCX: 0000000000000000 [125671.834973] RDX: 0000000000000000 RSI: 00000000000c1bff RDI: ffff88002ebd62a8 [125671.834973] RBP: ffff8801ac91bc70 R08: 0000000000000001 R09: 0000000000000000 [125671.834973] R10: ffff8801ac91bc70 R11: 0000000000000000 R12: ffff88002ebd62a8 [125671.834973] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000c1bff [125671.834973] FS: 0000000000000000(0000) GS:ffff88023fd40000(0000) knlGS:0000000000000000 [125671.834973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [125671.834973] CR2: 000000000073cae4 CR3: 00000000b7723000 CR4: 00000000000006e0 [125671.834973] Stack: [125671.834973] 0000000000000000 ffff8801422d5600 ffff8802286bbc00 0000000000000000 [125671.834973] 0000000000000001 ffff8802286bbc00 00000000000c1bff 0000000000000000 [125671.834973] ffff88002e639eb8 ffff8801ac91bc80 ffffffff81270541 ffff8801ac91bcb0 [125671.834973] Call Trace: [125671.834973] [<ffffffff81270541>] radix_tree_lookup+0xd/0xf [125671.834973] [<ffffffffa04ae6a6>] reada_peer_zones_set_lock+0x3e/0x60 [btrfs] [125671.834973] [<ffffffffa04ae8b9>] reada_pick_zone+0x29/0x103 [btrfs] [125671.834973] [<ffffffffa04af42f>] reada_start_machine_worker+0x129/0x2d3 [btrfs] [125671.834973] [<ffffffffa04880be>] btrfs_scrubparity_helper+0x185/0x3aa [btrfs] [125671.834973] [<ffffffffa0488341>] btrfs_readahead_helper+0xe/0x10 [btrfs] [125671.834973] [<ffffffff81069691>] process_one_work+0x271/0x4e9 [125671.834973] [<ffffffff81069dda>] worker_thread+0x1eb/0x2c9 [125671.834973] [<ffffffff81069bef>] ? rescuer_thread+0x2b3/0x2b3 [125671.834973] [<ffffffff8106f403>] kthread+0xd4/0xdc [125671.834973] [<ffffffff8149e242>] ret_from_fork+0x22/0x40 [125671.834973] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286 So fix this by taking the device_list_mutex in the readahead code. We can't use here the lighter approach of using a rcu_read_lock() and rcu_read_unlock() pair together with a list_for_each_entry_rcu() call because we end up doing calls to sleeping functions (kzalloc()) in the respective code path. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
Vinson Lee authored
This patch fixes this build error. /usr/include/linux/btrfs.h:121:3: error: unknown type name ‘u64’ u64 devid; ^~~ Fixes: 6b526ed7 ("btrfs: introduce device delete by devid") Signed-off-by:
Vinson Lee <vlee@freedesktop.org> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- May 27, 2016
-
-
Chris Mason authored
When btrfs_copy_from_user isn't able to copy all of the pages, we need to adjust our accounting to reflect the work that was actually done. Commit 2e78c927 changed around the decisions a little and we ended up skipping the accounting adjustments some of the time. This commit makes sure that when we don't copy anything at all, we still hop into the adjustments, and switches to release_bytes instead of write_bytes, since write_bytes isn't aligned. The accounting errors led to warnings during btrfs_destroy_inode: [ 70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0 [ 70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk [ 70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G W 4.6.0-rc6_00062_g2997da1-dirty #23 [ 70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014 [ 70.847542] 0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202 [ 70.847543] 0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08 [ 70.847547] ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28 [ 70.847547] Call Trace: [ 70.847550] [<ffffffff8149d5e9>] dump_stack+0x51/0x78 [ 70.847551] [<ffffffff8107bdfd>] __warn+0xfd/0x120 [ 70.847553] [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20 [ 70.847555] [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0 [ 70.847556] [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140 [ 70.847558] [<ffffffff812004b3>] destroy_inode+0x43/0x70 [ 70.847559] [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40 [ 70.847560] [<ffffffff81200c68>] evict+0x148/0x1d0 [ 70.847562] [<ffffffff81398ade>] ? start_transaction+0x3de/0x460 [ 70.847564] [<ffffffff81200d49>] dispose_list+0x59/0x80 [ 70.847565] [<ffffffff81201ba0>] evict_inodes+0x180/0x190 [ 70.847566] [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50 [ 70.847568] [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100 [ 70.847569] [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20 [ 70.847571] [<ffffffff811e9796>] kill_anon_super+0x16/0x30 [ 70.847573] [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130 [ 70.847574] [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90 [ 70.847576] [<ffffffff811e9e61>] deactivate_super+0x51/0x70 [ 70.847577] [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80 [ 70.847579] [<ffffffff81205402>] __cleanup_mnt+0x12/0x20 [ 70.847581] [<ffffffff81098358>] task_work_run+0x68/0xa0 [ 70.847582] [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0 [ 70.847583] [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170 [ 70.847586] [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25 This is the test program I used to force short returns from btrfs_copy_from_user void *dontneed(void *arg) { char *p = arg; int ret; while(1) { ret = madvise(p, BUFSIZE/4, MADV_DONTNEED); if (ret) { perror("madvise"); exit(1); } } } int main(int ac, char **av) { int ret; int fd; char *filename; unsigned long offset; char *buf; int i; pthread_t tid; if (ac != 2) { fprintf(stderr, "usage: dammitdave filename\n"); exit(1); } buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); if (buf == MAP_FAILED) { perror("mmap"); exit(1); } memset(buf, 'a', BUFSIZE); filename = av[1]; ret = pthread_create(&tid, NULL, dontneed, buf); if (ret) { fprintf(stderr, "error %d from pthread_create\n", ret); exit(1); } ret = pthread_detach(tid); if (ret) { fprintf(stderr, "pthread detach failed %d\n", ret); exit(1); } while (1) { fd = open(filename, O_RDWR | O_CREAT, 0600); if (fd < 0) { perror("open"); exit(1); } for (i = 0; i < ROUNDS; i++) { int this_write = BUFSIZE; offset = rand() % MAXSIZE; ret = pwrite(fd, buf, this_write, offset); if (ret < 0) { perror("pwrite"); exit(1); } else if (ret != this_write) { fprintf(stderr, "short write to %s offset %lu ret %d\n", filename, offset, ret); exit(1); } if (i == ROUNDS - 1) { ret = sync_file_range(fd, offset, 4096, SYNC_FILE_RANGE_WRITE); if (ret < 0) { perror("sync_file_range"); exit(1); } } } ret = ftruncate(fd, 0); if (ret < 0) { perror("ftruncate"); exit(1); } ret = close(fd); if (ret) { perror("close"); exit(1); } ret = unlink(filename); if (ret) { perror("unlink"); exit(1); } } return 0; } Signed-off-by:
Chris Mason <clm@fb.com> Reported-by:
Dave Jones <dsj@fb.com> Fixes: 2e78c927 cc: stable@vger.kernel.org # v4.6 Signed-off-by:
Chris Mason <clm@fb.com>
-
Chris Mason authored
Merge branch 'for-chris-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
-
- May 26, 2016
-
-
David Sterba authored
-
David Sterba authored
-
David Sterba authored
-