This will make it easier to support multiple address spaces in
kvm_gfn_to_hva_cache_init.  Instead of having to check the address
space id, we can keep on checking just the generation number.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This will make it a bit simpler to handle multiple address spaces
in gfn_to_hva_cache.

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

No point in registering the device if it cannot work.
The hypercall does not advertise itself, so we have to call it.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The hashtable and guarding spinlock are global data structures,
we can inititalize them statically.

Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170124212116.4568-1-david@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Nested_vmx_run is split into two parts: the part that handles the
VMLAUNCH/VMRESUME instruction, and the part that modifies the vcpu state
to transition from VMX root mode to VMX non-root mode. The latter will
be used when restoring the checkpointed state of a vCPU that was in VMX
operation when a snapshot was taken.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The checks performed on the contents of the vmcs12 are extracted from
nested_vmx_run so that they can be used to validate a vmcs12 that has
been restored from a checkpoint.

Signed-off-by: Jim Mattson <jmattson@google.com>
[Change prepare_vmcs02 and nested_vmx_load_cr3's last argument to u32,
 to match check_vmentry_postreqs.  Update comments for singlestep
 handling. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Perform the checks on vmcs12 state early, but defer the gpa->hpa lookups
until after prepare_vmcs02. Later, when we restore the checkpointed
state of a vCPU in guest mode, we will not be able to do the gpa->hpa
lookups when the restore is done.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Handle_vmptrld is split into two parts: the part that handles the
VMPTRLD instruction, and the part that establishes the current VMCS
pointer.  The latter will be used when restoring the checkpointed state
of a vCPU that had a valid VMCS pointer when a snapshot was taken.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Handle_vmon is split into two parts: the part that handles the VMXON
instruction, and the part that modifies the vcpu state to transition
from legacy mode to VMX operation. The latter will be used when
restoring the checkpointed state of a vCPU that was in VMX operation
when a snapshot was taken.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Split prepare_vmcs12 into two parts: the part that stores the current L2
guest state and the part that sets up the exit information fields. The
former will be used when checkpointing the vCPU's VMX state.

Modify prepare_vmcs02 so that it can construct a vmcs02 midway through
L2 execution, using the checkpointed L2 guest state saved into the
cached vmcs12 above.

Signed-off-by: Jim Mattson <jmattson@google.com>
[Rebasing: add from_vmentry argument to prepare_vmcs02 instead of using
 vmx->nested.nested_run_pending, because it is no longer 1 at the
 point prepare_vmcs02 is called. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since bf9f6ac8 ("KVM: Update Posted-Interrupts Descriptor when vCPU
is blocked", 2015-09-18) the posted interrupt descriptor is checked
unconditionally for PIR.ON.  Therefore we don't need KVM_REQ_EVENT to
trigger the scan and, if NMIs or SMIs are not involved, we can avoid
the complicated event injection path.

Calling kvm_vcpu_kick if PIR.ON=1 is also useless, though it has been
there since APICv was introduced.

However, without the KVM_REQ_EVENT safety net KVM needs to be much
more careful about races between vmx_deliver_posted_interrupt and
vcpu_enter_guest.  First, the IPI for posted interrupts may be issued
between setting vcpu->mode = IN_GUEST_MODE and disabling interrupts.
If that happens, kvm_trigger_posted_interrupt returns true, but
smp_kvm_posted_intr_ipi doesn't do anything about it.  The guest is
entered with PIR.ON, but the posted interrupt IPI has not been sent
and the interrupt is only delivered to the guest on the next vmentry
(if any).  To fix this, disable interrupts before setting vcpu->mode.
This ensures that the IPI is delayed until the guest enters non-root mode;
it is then trapped by the processor causing the interrupt to be injected.

Second, the IPI may be issued between kvm_x86_ops->sync_pir_to_irr(vcpu)
and vcpu->mode = IN_GUEST_MODE.  In this case, kvm_vcpu_kick is called
but it (correctly) doesn't do anything because it sees vcpu->mode ==
OUTSIDE_GUEST_MODE.  Again, the guest is entered with PIR.ON but no
posted interrupt IPI is pending; this time, the fix for this is to move
the RVI update after IN_GUEST_MODE.

Both issues were mostly masked by the liberal usage of KVM_REQ_EVENT,
though the second could actually happen with VT-d posted interrupts.
In both race scenarios KVM_REQ_EVENT would cancel guest entry, resulting
in another vmentry which would inject the interrupt.

This saves about 300 cycles on the self_ipi_* tests of vmexit.flat.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Calls to apic_find_highest_irr are scanning IRR twice, once
in vmx_sync_pir_from_irr and once in apic_search_irr.  Change
sync_pir_from_irr to get the new maximum IRR from kvm_apic_update_irr;
now that it does the computation, it can also do the RVI write.

In order to avoid complications in svm.c, make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add return value to __kvm_apic_update_irr/kvm_apic_update_irr.
Move vmx_sync_pir_to_irr around.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vcpu_run calls kvm_vcpu_running, not kvm_arch_vcpu_runnable,
and the former does not call check_nested_events.

Once KVM_REQ_EVENT is removed from the APICv interrupt injection
path, however, this would leave no place to trigger a vmexit
from L2 to L1, causing a missed interrupt delivery while in guest
mode.  This is caught by the "ack interrupt on exit" test in
vmx.flat.

[This does not change the calls to check_nested_events in
 inject_pending_event.  That is material for a separate cleanup.]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pending interrupts might be in the PI descriptor when the
LAPIC is restored from an external state; we do not want
them to be injected.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

As in the SVM patch, the guest physical address is passed by
VMX to x86_emulate_instruction already, so mark the GPA as available
in vcpu->arch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

This brings in two fixes for potential host crashes, from Ben
Herrenschmidt and Nick Piggin.

The newly added hypercall doesn't work on x86-32:

arch/x86/kvm/x86.c: In function 'kvm_pv_clock_pairing':
arch/x86/kvm/x86.c:6163:6: error: implicit declaration of function 'kvm_get_walltime_and_clockread';did you mean 'kvm_get_time_scale'? [-Werror=implicit-function-declaration]

This adds an #ifdef around it, matching the one around the related
functions that are also only implemented on 64-bit systems.

Fixes: 55dd00a7 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

kvmarm updates for 4.11

- GICv3 save restore
- Cache flushing fixes
- MSI injection fix for GICv3 ITS
- Physical timer emulation support

Fix to return error code -ENOMEM from the memory alloc error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Add a driver with gettime method returning hosts realtime clock.
This allows Chrony to synchronize host and guest clocks with
high precision (see results below).

chronyc> sources
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================

To configure Chronyd to use PHC refclock, add the
following line to its configuration file:

refclock PHC /dev/ptpX poll 3 dpoll -2 offset 0

Where /dev/ptpX is the kvmclock PTP clock.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

To be used by KVM PTP driver.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL.
Now VMs are able to use the EL1 physical timer.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

KVM traps on the EL1 phys timer accesses from VMs, but it doesn't handle
those traps. This results in terminating VMs. Instead, set a handler for
the EL1 phys timer access, and inject an undefined exception as an
intermediate step.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Set a background timer for the EL1 physical timer emulation while VMs
are running, so that VMs get the physical timer interrupts in a timely
manner.

Schedule the background timer on entry to the VM and cancel it on exit.
This would not have any performance impact to the guest OSes that
currently use the virtual timer since the physical timer is always not
enabled.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

When scheduling a background timer, consider both of the virtual and
physical timer and pick the earliest expiration time.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Now that we maintain the EL1 physical timer register states of VMs,
update the physical timer interrupt level along with the virtual one.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Initialize the emulated EL1 physical timer with the default irq number.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Add the EL1 physical timer context.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Now that we have a separate structure for timer context, make functions
generic so that they can work with any timer context, not just the
virtual timer context.  This does not change the virtual timer
functionality.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Make cntvoff per each timer context. This is helpful to abstract kvm
timer functions to work with timer context without considering timer
types (e.g. physical timer or virtual timer).

This also would pave the way for ever doing adjustments of the cntvoff
on a per-CPU basis if that should ever make sense.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Abstract virtual timer context into a separate structure and change all
callers referring to timer registers, irq state and so on. No change in
functionality.

This is about to become very handy when adding the EL1 physical timer.

Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The IRQFD framework calls the architecture dependent function
twice if the corresponding GSI type is edge triggered. For ARM,
the function kvm_set_msi() is getting called twice whenever the
IRQFD receives the event signal. The rest of the code path is
trying to inject the MSI without any validation checks. No need
to call the function vgic_its_inject_msi() second time to avoid
an unnecessary overhead in IRQ queue logic. It also avoids the
possibility of VM seeing the MSI twice.

Simple fix, return -1 if the argument 'level' value is zero.

Cc: stable@vger.kernel.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Fix rebase breakage from commit 55dd00a7 ("KVM: x86: add
KVM_HC_CLOCK_PAIRING hypercall", 2017-01-24), courtesy of the
"I could have sworn I had pushed the right branch" department.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This merges in a fix which touches both PPC and KVM code,
which was therefore put into a topic branch in the powerpc
tree.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Merge tag 'kvm-s390-next-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes and features for 4.11 (via kvm/next)

- enable some simd extensions for guests
- enable nx for guests
- debug log for cpu model
- PER fixes
- remove bitwise annotation from ar_t
- detect guests in operation exception program check loops
- fix potential null-pointer dereference for ucontrol guests

- also contains merge for fix that went into 4.10 to avoid conflicts

Merge tag 'kvm_mips_4.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/kvm-mips into HEAD

KVM: MIPS: GVA/GPA page tables, dirty logging, SYNC_MMU etc

Numerous MIPS KVM fixes, improvements, and features for 4.11, many of
which continue to pave the way for VZ support, the most interesting of
which are:

 - Add GVA->HPA page tables for T&E, to cache GVA mappings.
 - Generate fast-path TLB refill exception handler which loads host TLB
   entries from GVA page table, avoiding repeated guest memory
   translation and guest TLB lookups.
 - Use uaccess macros when T&E needs to access guest memory, which with
   GVA page tables and the Linux TLB refill handler improves robustness
   against TLB faults and fixes EVA hosts.
 - Use BadInstr/BadInstrP registers when available to obtain instruction
   encodings after a synchronous trap.
 - Add GPA->HPA page tables to replace the inflexible linear array,
   allowing for multiple sparsely arranged memory regions.
 - Properly implement dirty page logging.
 - Add KVM_CAP_SYNC_MMU support so that changes in GPA mappings become
   effective in guests even if they are already running, allowing for
   copy-on-write, KSM, idle page tracking, swapping, and guest memory
   ballooning.
 - Add KVM_CAP_READONLY_MEM support, so writes to specified memory
   regions are treated as MMIO.
 - Implement proper CP0_EBase support in T&E.
 - Expose a few more missing CP0 registers to userland.
 - Add KVM_CAP_NR_VCPUS and KVM_CAP_MAX_VCPUS support, and allow up to 8
   VCPUs to be created in a VM.
 - Various cleanups and dropping of dead and duplicated code.

Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

The big feature this time is support for POWER9 using the radix-tree
MMU for host and guest.  This required some changes to arch/powerpc
code, so I talked with Michael Ellerman and he created a topic branch
with this patchset, which I merged into kvm-ppc-next and which Michael
will pull into his tree.  Michael also put in some patches from Nick
Piggin which fix bugs in the interrupt vector code in relocatable
kernels when coming from a KVM guest.

Other notable changes include:

* Add the ability to change the size of the hashed page table,
  from David Gibson.

* XICS (interrupt controller) emulation fixes and improvements,
  from Li Zhong.

* Bug fixes from myself and Thomas Huth.

These patches define some new KVM capabilities and ioctls, but there
should be no conflicts with anything else currently upstream, as far
as I am aware.