We won't defrag an extent, if it's bigger than the threshold we
specified and there's no small extent before it, but actually
the code doesn't work this way.

There are three bugs:

- When should_defrag_range() decides we should keep on defragmenting
  an extent, last_len is not incremented. (old bug)

- The length that passes to should_defrag_range() is not the length
  we're going to defrag. (new bug)

- We always defrag 256K bytes data, and a big extent can be part of
  this range. (new bug)

For a file with 4 extents:

        | 4K | 4K | 256K | 256K |

The result of defrag with (the default) 256K extent thresh should be:

        | 264K | 256K |

but with those bugs, we'll get:

        | 520K |

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>

Signed-off-by: Jie Liu <jeff.liu@oracle.com>

It's off-by-one, and thus we may skip the last page while defragmenting.

An example case:

  # create /mnt/file with 2 4K file extents
  # btrfs fi defrag /mnt/file
  # sync
  # filefrag /mnt/file
  /mnt/file: 2 extents found

So it's not defragmented.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>

Don't use inode->i_size directly, since we're not holding i_mutex.

This also fixes another bug, that i_size can change after it's checked
against 0 and then (i_size - 1) can be negative.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>

There's an off-by-one bug:

  # create a file with lots of 4K file extents
  # btrfs fi defrag /mnt/file
  # sync
  # filefrag -v /mnt/file
  Filesystem type is: 9123683e
  File size of /mnt/file is 1228800 (300 blocks, blocksize 4096)
   ext logical physical expected length flags
     0       0     3372              64
     1      64     3136     3435      1
     2      65     3436     3136     64
     3     129     3201     3499      1
     4     130     3500     3201     64
     5     194     3266     3563      1
     6     195     3564     3266     64
     7     259     3331     3627      1
     8     260     3628     3331     40 eof

After this patch:

  ...
  # filefrag -v /mnt/file
  Filesystem type is: 9123683e
  File size of /mnt/file is 1228800 (300 blocks, blocksize 4096)
   ext logical physical expected length flags
     0       0     3372             300 eof
  /mnt/file: 1 extent found

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>

kmemleak found this:
unreferenced object 0xffff8801b64af968 (size 512):
  comm "btrfs-cleaner", pid 3317, jiffies 4306810886 (age 903.272s)
  hex dump (first 32 bytes):
    00 82 01 07 00 ea ff ff c0 83 01 07 00 ea ff ff  ................
    80 82 01 07 00 ea ff ff c0 87 01 07 00 ea ff ff  ................
  backtrace:
    [<ffffffff816875cc>] kmemleak_alloc+0x5c/0xc0
    [<ffffffff8114aec3>] kmem_cache_alloc_trace+0x163/0x240
    [<ffffffff8127a290>] btrfs_defrag_file+0xf0/0xb20
    [<ffffffff8125d9a5>] btrfs_run_defrag_inodes+0x165/0x210
    [<ffffffff812479d7>] cleaner_kthread+0x177/0x190
    [<ffffffff81075c7d>] kthread+0x8d/0xa0
    [<ffffffff816af5f4>] kernel_thread_helper+0x4/0x10
    [<ffffffffffffffff>] 0xffffffffffffffff

"pages" is not always freed. Fix it removing the unnecesary additional return.

Signed-off-by: Diego Calleja <diegocg@gmail.com>

Offset field in data extent backref can underflow if clone range ioctl
is used. We can reliably detect the underflow because max file size is
limited to 2^63 and max data extent size is limited by block group size.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>

I noticed we had a little bit of latency when writing out the space cache
inodes.  It's because we flush it before we write anything in case we have dirty
pages already there.  This doesn't matter though since we're just going to
overwrite the space, and there really shouldn't be any dirty pages anyway.  This
makes some of my tests run a little bit faster.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Mitch kept hitting a panic because he was getting ENOSPC.  One of my previous
patches makes it so we are much better at not allocating new metadata chunks.
Unfortunately coupled with the overcommit patch this works us into a bit of a
problem if we are removing a bunch of space and end up chewing up all of our
space with pinned extents.  We can allocate chunks fine and overflow is ok, but
the only way to reclaim this space is to commit the transaction.  So if we go to
overcommit, first check and see how much pinned space we have.  If we have more
than 80% of the free space chewed up with pinned extents, just commit the
transaction, this will free up enough space for our reservation and we won't
have this problem anymore.  With this patch Mitch's test doesn't blow up
anymore.  Thanks,

Reported-and-tested-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Josef Bacik <josef@redhat.com>

Currently btrfs_block_rsv_check does 2 things, it will either refill a block
reserve like in the truncate or refill case, or it will check to see if there is
enough space in the global reserve and possibly refill it.  However because of
overcommit we could be well overcommitting ourselves just to try and refill the
global reserve, when really we should just be committing the transaction.  So
breack this out into btrfs_block_rsv_refill and btrfs_block_rsv_check.  Refill
will try to reserve more metadata if it can and btrfs_block_rsv_check will not,
it will only tell you if the factor of the total space is still reserved.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

In __unlink_start_trans() if we don't have enough room for a reservation we will
check to see if the unlink will free up space.  If it does that's great, but we
will still could add an orphan item, so we need to reserve enough space to add
the orphan item.  Do this and migrate the space the global reserve so it all
works out right.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

We started setting trans->block_rsv = NULL to allow the delayed refs flushing
stuff to use the right block_rsv and then just made
btrfs_trans_release_metadata() unconditionally use the trans block rsv.  The
problem with this is we need to reserve some space in the transaction and then
migrate it to the global block rsv, so we need to be able to free that out
properly.  So instead just move btrfs_trans_release_metadata() before the
delayed ref flushing and use trans->block_rsv for the freeing.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Currently we only allow a maximum of 2 megabytes of pages to be flushed at a
time.  This was ok before, but now we have overcommit which will screw us in a
heartbeat if we are quickly filling the disk.  So instead pick either 2
megabytes or the number of pages we need to reclaim to be safe again, which ever
is larger.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

The only way we actually reclaim delalloc space is waiting for the IO to
completely finish.  Usually we kick off a bunch of IO and wait for a little bit
and hope we can make our reservation, and usually this works out pretty well.
With overcommit however we can get seriously underwater if we're filling up the
disk quickly, so we need to be able to force the delalloc shrinker to wait for
the ordered IO to finish to give us a better chance of actually reclaiming
enough space to get our reservation.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Before the only reason to commit the transaction to recover space in
reserve_metadata_bytes() was if there were enough pinned_bytes to satisfy our
reservation.  But now we have the delayed inode stuff which will hold it's
reservations until we commit the transaction.  So say we max out our reservation
by creating a bunch of files but don't have any pinned bytes we will ENOSPC out
early even though we could commit the transaction and get that space back.  So
now just unconditionally commit the transaction since currently there is no way
to know how much metadata space is being reserved by delayed inode stuff.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Recently I changed the xattr stuff to unconditionally set the xattr first in
case the xattr didn't exist yet.  This has introduced a regression when setting
an xattr that already exists with a large value.  If we find the key we are
looking for split_leaf will assume that we're extending that item.  The problem
is the size we pass down to btrfs_search_slot includes the size of the item
already, so if we have the largest xattr we can possibly have plus the size of
the xattr item plus the xattr item that btrfs_search_slot we'd overflow the
leaf.  Thankfully this is not what we're doing, but split_leaf doesn't know this
so it just returns EOVERFLOW.  So in the xattr code we need to check and see if
we got back EOVERFLOW and treat it like EEXIST since that's really what
happened.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Our unlink reservations were a bit much, we were reserving 10 and I only count 8
possible items we're touching, so comment what we're reserving for and fix the
count value.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

I noticed recently that my overcommit patch was causing one of my enospc tests
to fail 25% of the time with early ENOSPC.  This is because my overcommit patch
was letting us go way over board, but it wasn't waiting long enough to let the
delalloc shrinker do it's job.  The problem is we just start writeback and wait
a little bit hoping we flush enough, but we only free up delalloc space by
having the writes complete all the way.  We do this by waiting for ordered
extents, which we do but only if we already free'd enough for the reservation,
which isn't right, we should flush ordered extents if we didn't reclaim enough
in case that will push us over the edge.  With this patch I've not seen a
failure in this enospc test after running it in a loop for an hour.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Yeah yeah I know this is how we used to do it and then I changed it, but damnit
I'm changing it back.  The fact is that writing out checksums will modify
metadata, which could cause us to dirty a block group we've already written out,
so we have to truncate it and all of it's checksums and re-write it which will
write new checksums which could dirty a blockg roup that has already been
written and you see where I'm going with this?  This can cause unmount or really
anything that depends on a transaction to commit to take it's sweet damned time
to happen.  So go back to the way it was, only this time we're specifically
setting NODATACOW because we can't go through the COW pathway anyway and we're
doing our own built-in cow'ing by truncating the free space cache.  The other
new thing is once we truncate the old cache and preallocate the new space, we
don't need to do that song and dance at all for the rest of the transaction, we
can just overwrite the existing space with the new cache if the block group
changes for whatever reason, and the NODATACOW will let us do this fine.  So
keep track of which transaction we last cleared our cache in and if we cleared
it in this transaction just say we're all setup and carry on.  This survives
xfstests and stress.sh.

The inode cache will continue to use the normal csum infrastructure since it
only gets written once and there will be no more modifications to the fs tree in
a transaction commit.

Signed-off-by: Josef Bacik <josef@redhat.com>

My overcommit stuff can be a little racy when we're filling up the disk with
fs_mark and we overcommit into things that quickly get used up for data.  So use
num_bytes to see if we have enough available space so we're less likely to
overcommit ourselves out of the ability to make reservations.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

We need to check the return value of filemap_write_and_wait in the space cache
writeout code.  Also don't set the inode's generation until we're sure nothing
else is going to fail.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

In writing and reading the space cache we have one big loop that keeps track of
which page we are on and then a bunch of sizeable loops underneath this big loop
to try and read/write out properly.  Especially in the write case this makes
things hugely complicated and hard to follow, and makes our error checking and
recovery equally as complex.  So add a io_ctl struct with a bunch of helpers to
keep track of the pages we have, where we are, if we have enough space etc.
This unifies how we deal with the pages we're writing and keeps all the messy
tracking internal.  This allows us to kill the big loops in both the read and
write case and makes reviewing and chaning the write and read paths much
simpler.  I've run xfstests and stress.sh on this code and it survives.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

I noticed a slight bug where we will not bother writing out the block group
cache's space cache if it's space tree is empty.  Since it could have a cluster
or pinned extents that need to be written out this is just not a valid test.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Some users have requested this and I've found I needed a way to disable cache
loading without actually clearing the cache, so introduce the no_space_cache
option.  Before we check the super blocks cache generation field and if it was
populated we always turned space caching on.  Now we check this and set the
space cache option on, and then parse the mount options so that if we want it
off it get's turned off.  Then we check the mount option all the places we do
the caching work instead of checking the super's cache generation.  This makes
things more consistent and lets us turn space caching off.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Xfstests 79 was failing because we were inheriting the S_APPEND flag when we
weren't supposed to.  There isn't any specific documentation on this so I'm
taking the test as the standard of how things work, and having S_APPEND set on a
directory doesn't mean that S_APPEND gets inherited by its children according to
this test.  So only inherit btrfs specific things.  This will let us set
compress/nocompress on specific directories and everything in the directories
will inherit this flag, same with nodatacow.  With this patch test 79 passes.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

One of the things that kills us is the fact that our ENOSPC reservations are
horribly over the top in most normal cases.  There isn't too much that can be
done about this because when we are completely full we really need them to work
like this so we don't under reserve.  However if there is plenty of unallocated
chunks on the disk we can use that to gauge how much we can overcommit.  So this
patch adds chunk free space accounting so we always know how much unallocated
space we have.  Then if we fail to make a reservation within our allocated
space, check to see if we can overcommit.  In the normal flushing case (like
with delalloc metadata reservations) we'll take the free space and divide it by
2 if our metadata profile is setup for DUP or any of those, and then divide it
by 8 to make sure we don't overcommit too much.  Then if we're in a non-flushing
case (we really need this reservation now!) we only limit ourselves to half of
the free space.  This makes this fio test

[torrent]
filename=torrent-test
rw=randwrite
size=4g
ioengine=sync
directory=/mnt/btrfs-test

go from taking around 45 minutes to 10 seconds on my freshly formatted 3 TiB
file system.  This doesn't seem to break my other enospc tests, but could really
use some more testing as this is a super scary change.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

I noticed while running xfstests 83 that if we didn't have enough space to
delete our inode the orphan cleanup would just loop.  This is because it keeps
finding the same orphan item and keeps trying to kill it but can't because we
don't get an error back from iput for deleting the inode.  So keep track of the
last guy we tried to kill, if it's the same as the one we're trying to kill
currently we know we are having problems and can just error out.  I don't have a
way to test this so look hard and make sure it's right.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Xfstests 83 really stresses our ENOSPC since it uses a 100mb fs which ends up
with the mixed block group stuff.  Because of this we can run into a situation
where we don't have enough space to delete inodes, or even worse we can't free
the inodes when we next mount the fs which causes the orphan code to lose its
mind.  So if we fail to make our reservation, steal from the global reserve.
The global reserve will end up taking up the entire rest of the free space on
the fs in this worst case so there really is no other option.  With this patch
test 83 doesn't freak out.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

While looking for a performance regression a user was complaining about, I
noticed that we had a regression with the varmail test of filebench.  This was
introduced by

0d10ee2e



which keeps us from calling writepages in writepage.  This is a correct change,
however it happens to help the varmail test because we write out in larger
chunks.  This is largly to do with how we write out dirty pages for each
transaction.  If you run filebench with

load varmail
set $dir=/mnt/btrfs-test
run 60

prior to this patch you would get ~1420 ops/second, but with the patch you get
~1200 ops/second.  This is a 16% decrease.  So since we know the range of dirty
pages we want to write out, don't write out in one page chunks, write out in
ranges.  So to do this we call filemap_fdatawrite_range() on the range of bytes.
Then we convert the DIRTY extents to NEED_WAIT extents.  When we then call
btrfs_wait_marked_extents() we only have to filemap_fdatawait_range() on that
range and clear the NEED_WAIT extents.  This doesn't get us back to our original
speeds, but I've been seeing ~1380 ops/second, which is a <5% regression as
opposed to a >15% regression.  That is acceptable given that the original commit
greatly reduces our latency to begin with.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

If I have a range where I know a certain bit is and I want to set it to another
bit the only option I have is to call set and then clear bit, which will result
in 2 tree searches.  This is inefficient, so introduce convert_extent_bit which
will go through and set the bit I want and clear the old bit I don't want.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

There is a bug that may lead to early ENOSPC in our reservation code.  We've
been checking against num_bytes which may be above and beyond what we want to
actually reserve, which could give us a false ENOSPC.  Fix this by making sure
the unused space is above how much we want to reserve and not how much we're
trying to flush.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

In fixing how we deal with bad inodes, we had a regression in the orphan cleanup
code, since it expects to get a bad inode back.  So fix it to deal with getting
-ESTALE back by deleting the orphan item manually and moving on.  Thanks,

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Josef Bacik <josef@redhat.com>

Johannes pointed out we were allocating only kernel pages for doing writes,
which is kind of a big deal if you are on 32bit and have more than a gig of ram.
So fix our allocations to use the mapping's gfp but still clear __GFP_FS so we
don't re-enter.  Thanks,

Reported-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Josef Bacik <josef@redhat.com>

I kept getting warnings from evict because we were calling
btrfs_start_transaction() with a transaction already started when doing a
balance.  This is because we remove a block group which requires a transaction,
and the put the last reference on the cache inode.  Instead of doing this we
need to delay the iput so it is done not within a transaction having started.
This gets rid of our warnings.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Checksums are charged in 2 different ways.  The first case is when we're writing
to the disk, we account for the new checksums with the delalloc block rsv.  In
order for this to work we check if we're allocating a block for the csum root
and if trans->block_rsv == the delalloc block rsv.  But when we're deleting the
csums because of cow, this is charged to the global block rsv, and is done when
we run the delayed refs.  So we need to make sure that trans->block_rsv == NULL
when running the delayed refs.  So set it to NULL and reset it in
should_end_transaction, and set it to NULL in commit_transaction.  This got rid
of the ridiculous amount of warnings I was seeing when trying to do a balance.
Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

The only thing that we need to have a trans handle for is in
reserve_metadata_bytes and thats to know how much flushing we can do.  So
instead of passing it around, just check current->journal_info for a
trans_handle so we know if we can commit a transaction to try and free up space
or not.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Since the durable block rsv stuff has been killed there is no need to get the
block_rsv in btrfs_free_tree_block anymore.

Signed-off-by: Josef Bacik <josef@redhat.com>

The alloc warnings everybody has been seeing is because we have been reserving
space for csums, but we weren't actually using that space.  So make
get_block_rsv() return the trans->block_rsv if we're modifying the csum root.
Also set the trans->block_rsv to NULL so that if we modify the csum root when
running delayed ref's that comes out of the global reserve like it's supposed
to.  With this patch I'm not seeing those alloc warnings anymore.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

Since free space inodes now use normal checksumming we need to make sure to
account for their metadata use.  So reserve metadata space, and then if we fail
to write out the metadata we can just release it, otherwise it will be freed up
when the io completes.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>

In moving some enospc stuff around I noticed that when we unmount we are often
evicting the free space cache inodes before we do our last commit.  This isn't
bad, but it makes us constantly have to re-read the inodes back.  So instead
don't evict the cache until after we do our last commit, this will make things a
little less crappy and makes a future enospc change work properly.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>