M= (or KBUILD_EXTMOD) generally expects a directory path without any
trailing slashes, like M=a/b/c.

If you add a trailing slash, like M=a/b/c/, you will get ugly build
logs (two slashes in a series), but it still works fine as long as it
is consistent between 'make modules' and 'make modules_install'.

The following commands correctly build and install the modules.

  $ make M=a/b/c/ modules
  $ sudo make M=a/b/c/ modules_install

Since commit ccae4cfa ("kbuild: refactor scripts/Makefile.modinst"),
a problem happens if you add a trailing slash only for modules_install.

  $ make M=a/b/c modules
  $ sudo make M=a/b/c/ modules_install

No module is installed in this case, Johannes Berg reported. [1]

Trim any trailing slashes from $(KBUILD_EXTMOD).

I used the 'dirname' command to remove all the trailing slashes in
case someone adds more slashes like M=a/b/c/////. The Make's built-in
function, $(dir ...) cannot take care of such a case.

[1]: https://lore.kernel.org/lkml/10cc8522b27a051e6a9c3e158a4c4b6414fd04a0.camel@sipsolutions.net/

Fixes: ccae4cfa

 ("kbuild: refactor scripts/Makefile.modinst")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Extend IS_MODULE() and IS_ENABLED comments to explain why one might use
"#if IS_ENABLED(CONFIG_FOO)" instead of "#ifdef CONFIG_FOO".

To wit, "#ifdef CONFIG_FOO" is true only for CONFIG_FOO=y, while
"#if IS_ENABLED(CONFIG_FOO)" is true for both CONFIG_FOO=y and
CONFIG_FOO=m.

This is because "CONFIG_FOO=m" in .config does not result in "CONFIG_FOO"
being defined.  The actual definitions are in autoconf.h, where:

  CONFIG_FOO=y   results in   #define CONFIG_FOO 1
  CONFIG_FOO=m   results in   #define CONFIG_FOO_MODULE 1

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

getopt_long() does not modify the long_opts structure.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Reduce the indentation.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>

Both of if and else parts append exactly 12 hex chars, but in
different ways.

Factor out the else part because we need to support it without relying
on git-describe. Remove the --abbrev=12 option since we do not use the
hash from git-describe anyway.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>

This script stumbled on the read-only source tree over again:

 - a2bb90a0 ("kbuild: fix delay in setlocalversion on readonly
   source")

 - cdf2bc63 ("scripts/setlocalversion on write-protected source
   tree")

 - 8ef14c2c ("Revert "scripts/setlocalversion: git: Make -dirty
   check more robust"")

 - ff64dd48

 ("scripts/setlocalversion: Improve -dirty check with
   git-status --no-optional-locks")

Add comments to clarify that this script should never ever try to write
to the source tree.

'git describe --dirty' might look as a simple solution for appending
the -dirty string, but we cannot use it because it creates the
.git/index.lock file.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>

This reverts commit b052ce4c ("kbuild: fix false positive -dirty
tag caused by make-kpkg").

If I understand correctly, this problem occurred in very old versions
of make-kpkg. When I tried a newer version, make-kpkg did not touch
scripts/package/Makefile.

Anyway, Debian uses 'make deb-pkg' instead of make-kpkg these days.

Debian handbook [1] mentions it as "the good old days":

 "CULTURE The good old days of kernel-package

  Before the Linux build system gained the ability to build proper
  Debian packages, the recommended way to build such packages was to
  use make-kpkg from the kernel-package package."

[1]: https://debian-handbook.info/browse/stable/sect.kernel-compilation.html



Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>

The mercurial, svn, git-svn supports were added by the following commits:

 - 3dce174c ("kbuild: support mercurial in setlocalversion")

 - ba3d05fb ("kbuild: add svn revision information to setlocalversion")

 - ff80aa97

 ("setlocalversion: add git-svn support")

They did not explain why they are useful for the kernel source tree.
Let's revert all of them, and see if somebody will complain about it.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>

There were efforts to make 'make -s' really silent when it is a
warning-free build.

The conventional way was to let a shell script check ${quiet}, and if
it is 'silent_', suppress the stdout by itself.

With the previous commit, the 'cmd' takes care of it now. The 'cmd' is
also invoked from if_changed, if_changed_dep, and if_changed_rule.

You can omit ${quiet} checks in shell scripts when they are invoked
from the 'cmd' macro.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When building with 'make -s', no output to stdout should be printed.

As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.

I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.

Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.

[Note about this implementation]

'exec >/dev/null;' may look somewhat tricky, but this has a reason.

Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:

  cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null

... but it would not work if $(cmd_$(1)) itself contains a redirection.

For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.

It would be expanded into:

  echo "#include <asm-generic/$*.h>" > $@ >/dev/null

Then, the target file gets empty because the string will go to /dev/null
instead of $@.

Next, I tried this:

  cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null

The form above would be expanded into:

  { echo "#include <asm-generic/$*.h>" > $@; } >/dev/null

This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.

When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:

  set -e;  { ; } >/dev/null

..., which causes an syntax error.

I also tried this:

  cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null

... but this causes a syntax error for the same reason.

So, finally I adopted:

  cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))

[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/



Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The 'cmd' macro shows the short log only when $(quiet) is quiet_.
Do not do it manually.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

scripts/mkmakefile is simple enough to be merged in the Makefile.

Use $(call cmd,...) to show the log instead of doing it in the
shell script.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can
use the obj-y syntax.

Add an empty file if it is missing in arch/$(SRCARCH)/.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

I do not see a good reason why only the libelf development package must
be so carefully checked.

Kbuild generally does not check host tools or libraries.

For example, x86_64 defconfig fails to build with no libssl development
package installed.

scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
   21 | #include <openssl/bio.h>
      |          ^~~~~~~~~~~~~~~

To solve the build error, you need to install libssl-dev or openssl-devel
package, depending on your distribution.

'apt-file search', 'dnf provides', etc. is your frined to find a proper
package to install.

This commit removes all the libelf checks from the top Makefile.

If libelf is missing, objtool will fail to build in a similar pattern:

.../linux/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
   10 | #include <gelf.h>

You need to install libelf-dev, libelf-devel, or elfutils-libelf-devel
to proceed.

Another remarkable change is, CONFIG_STACK_VALIDATION (without
CONFIG_UNWINDER_ORC) previously continued to build with a warning,
but now it will treat missing libelf as an error.

This is just a one-time installation, so it should not hurt to break
a build and make a user install the package.

BTW, the traditional way to handle such checks is autotool, but according
to [1], I do not expect the kernel build would have similar scripting
like './configure' does.

[1]: https://lore.kernel.org/lkml/CA+55aFzr2HTZVOuzpHYDwmtRJLsVzE-yqg2DHpHi_9ePsYp5ug@mail.gmail.com/



Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>

The tools/ directory only exists in the kernel source tree, not in
external modules.

Do not expose the meaningless targets to external modules.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit 09c60546 ("./Makefile: add debug option to enable
function aligned on 32 bytes") was introduced to help debugging
strange kernel performance changes caused by code alignment
change.

Recently we found 2 similar cases [1][2] caused by code-alignment
changes, which can only be identified by forcing 64 bytes aligned
for all functions.

Originally, 32 bytes was used mainly for not wasting too much
text space, but this option is only for debug anyway where text
space is not a big concern. So extend the alignment to 64 bytes
to cover more similar cases.

[1].https://lore.kernel.org/lkml/20210427090013.GG32408@xsang-OptiPlex-9020/
[2].https://lore.kernel.org/lkml/20210420030837.GB31773@xsang-OptiPlex-9020/


Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull perf fixes from Thomas Gleixner:
 "Two perf fixes:

   - Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
     this can cause malfunction when TOS is not supported

   - Allocate the LBR XSAVE buffers along with the DS buffers upfront
     because allocating them when adding an event can deadlock"

* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
  perf/x86: Avoid touching LBR_TOS MSR for Arch LBR

Pull locking fixes from Thomas Gleixner:
 "Two locking fixes:

   - Invoke the lockdep tracepoints in the correct place so the ordering
     is correct again

   - Don't leave the mutex WAITER bit stale when the last waiter is
     dropping out early due to a signal as that forces all subsequent
     lock operations needlessly into the slowpath until it's cleaned up
     again"

* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
  locking/lockdep: Correct calling tracepoints

Pull irq fixes from Thomas Gleixner:
 "A few fixes for irqchip drivers:

   - Allocate interrupt descriptors correctly on Mainstone PXA when
     SPARSE_IRQ is enabled; otherwise the interrupt association fails

   - Make the APPLE AIC chip driver depend on APPLE

   - Remove redundant error output on devm_ioremap_resource() failure"

* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Remove redundant error printing
  irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
  ARM: PXA: Fix cplds irqdesc allocation when using legacy mode

Pull x86 fixes from Borislav Petkov:

 - Fix how SEV handles MMIO accesses by forwarding potential page faults
   instead of killing the machine and by using the accessors with the
   exact functionality needed when accessing memory.

 - Fix a confusion with Clang LTO compiler switches passed to the it

 - Handle the case gracefully when VMGEXIT has been executed in
   userspace

* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __put_user()/__get_user() for data accesses
  x86/sev-es: Forward page-faults which happen during emulation
  x86/sev-es: Don't return NULL from sev_es_get_ghcb()
  x86/build: Fix location of '-plugin-opt=' flags
  x86/sev-es: Invalidate the GHCB after completing VMGEXIT
  x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch

Pull powerpc fixes from Michael Ellerman:

 - Fix breakage of strace (and other ptracers etc.) when using the new
   scv ABI (Power9 or later with glibc >= 2.33).

 - Fix early_ioremap() on 64-bit, which broke booting on some machines.

Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.

* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
  powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
  powerpc: Fix early setup to make early_ioremap() work

Merge tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix short log indentation for tools builds

 - Fix dummy-tools to adjust to the latest stackprotector check

* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: dummy-tools: adjust to stricter stackprotector check
  scripts/jobserver-exec: Fix a typo ("envirnoment")
  tools build: Fix quiet cmd indentation

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
  and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  userfaultfd: hugetlbfs: fix new flag usage in error path
  lib: kunit: suppress a compilation warning of frame size
  proc: remove Alexey from MAINTAINERS
  linux/bits.h: fix compilation error with GENMASK
  watchdog: reliable handling of timestamps
  kasan: slab: always reset the tag in get_freepointer_safe()
  tools/testing/selftests/exec: fix link error
  ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
  Revert "mm/gup: check page posion status for coredump."
  mm/shuffle: fix section mismatch warning

In commit d6995da3 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve.  Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.

Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation.  Specifically, this would be the
result of an unlikely copy_huge_page_from_user error.  There is not an
increased chance of hitting the VM_BUG_ON.

Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com
Fixes: d6995da3

 ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasry.mina@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^

As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build".  Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning.  Just suppress
it.

Link: https://lkml.kernel.org/r/20210518094533.7652-1-thunder.leizhen@huawei.com


Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

People Cc me and I don't have time.

Link: https://lkml.kernel.org/r/YKarMxHJBIhMHQIh@localhost.localdomain


Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.

However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0].  It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].

Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.

Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk [0]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1]
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp [2]
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com


Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9bf3bc94 ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.

But it introduced a risk of false softlockup reports.  The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup().  As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.

A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it.  But it would put back the cycle that
complicates the logic.

In fact, the handling of all the timestamps is not reliable.  The code
does not guarantee when and how many times the timestamps are read.  For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup().  It works just by chance.

Fix all the problems by making the code even more explicit.

1. Make sure that "now" and "period_ts" timestamps are read only once.
   They might be changed at anytime by NMI or when the virtual guest is
   stopped by the host.  Note that "now" timestamp does this implicitly
   because "jiffies" is marked volatile.

2. "now" time must be read first.  The state of "period_ts" will
   decide whether it will be used or the period will get restarted.

3. kvm_check_and_clear_guest_paused() must be called before reading
   "period_ts".  It touches the variable when the guest was stopped.

As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime.  "period_ts" is
restarted in all other situations.

Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley
Fixes: 9bf3bc94

 ("watchdog: cleanup handling of false positives")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With CONFIG_DEBUG_PAGEALLOC enabled, the kernel should also untag the
object pointer, as done in get_freepointer().

Failing to do so reportedly leads to SLUB freelist corruptions that
manifest as boot-time crashes.

Link: https://lkml.kernel.org/r/20210514072228.534418-1-glider@google.com


Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the link error by adding '-static':

  gcc -Wall  -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
  /usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
  /usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
  /usr/bin/ld: final link failed: bad value
  collect2: error: ld returned 1 exit status
  make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1

Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f0

 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_mq_timedreceive calls wq_sleep with a stack local address.  The
sender (do_mq_timedsend) uses this address to later call pipelined_send.

This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:

  RIP: 0010:wake_q_add_safe+0x13/0x60
  Call Trace:
   __x64_sys_mq_timedsend+0x2a9/0x490
   do_syscall_64+0x80/0x680
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5928e40343

The race occurs as:

1. do_mq_timedreceive calls wq_sleep with the address of `struct
   ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
   holds a valid `struct ext_wait_queue *` as long as the stack has not
   been overwritten.

2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
   do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
   __pipelined_op.

3. Sender calls __pipelined_op::smp_store_release(&this->state,
   STATE_READY).  Here is where the race window begins.  (`this` is
   `ewq_addr`.)

4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
   will see `state == STATE_READY` and break.

5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
   to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
   stack.  (Although the address may not get overwritten until another
   function happens to touch it, which means it can persist around for an
   indefinite time.)

6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
   `struct ext_wait_queue *`, and uses it to find a task_struct to pass to
   the wake_q_add_safe call.  In the lucky case where nothing has
   overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
   In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
   bogus address as the receiver's task_struct causing the crash.

do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.

As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare.  Fix
those in the same way.

Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com
Fixes: c5b2cbdb ("ipc/mqueue.c: update/document memory barriers")
Fixes: 8116b54e ("ipc/sem.c: document and update memory barriers")
Fixes: 0d97a82b

 ("ipc/msg.c: update and document memory barriers")
Signed-off-by: Varad Gautam <varad.gautam@suse.com>
Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While reviewing [1] I came across commit d3378e86 ("mm/gup: check
page posion status for coredump.") and noticed that this patch is broken
in two ways.  First it doesn't really prevent hwpoison pages from being
dumped because hwpoison pages can be marked asynchornously at any time
after the check.  Secondly, and more importantly, the patch introduces a
ref count leak because get_dump_page takes a reference on the page which
is not released.

It also seems that the patch was merged incorrectly because there were
follow up changes not included as well as discussions on how to address
the underlying problem [2]

Therefore revert the original patch.

Link: http://lkml.kernel.org/r/20210429122519.15183-4-david@redhat.com [1]
Link: http://lkml.kernel.org/r/57ac524c-b49a-99ec-c1e4-ef5027bfb61b@redhat.com [2]
Link: https://lkml.kernel.org/r/20210505135407.31590-1-mhocko@kernel.org
Fixes: d3378e86

 ("mm/gup: check page posion status for coredump.")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clang sometimes decides not to inline shuffle_zone(), but it calls a
__meminit function.  Without the extra __meminit annotation we get this
warning:

  WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone()
  The function shuffle_zone() references
  the function __meminit __shuffle_zone().
  This is often because shuffle_zone lacks a __meminit
  annotation or the annotation of __shuffle_zone is wrong.

shuffle_free_memory() did not show the same problem in my tests, but it
could happen in theory as well, so mark both as __meminit.

Link: https://lkml.kernel.org/r/20210514135952.2928094-1-arnd@kernel.org


Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:

 - Fix BLKRRPART and deletion race (Gulam, Christoph)

 - NVMe pull request (Christoph):
      - nvme-tcp corruption and timeout fixes (Sagi Grimberg, Keith
        Busch)
      - nvme-fc teardown fix (James Smart)
      - nvmet/nvme-loop memory leak fixes (Wu Bo)"

* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
  block: fix a race between del_gendisk and BLKRRPART
  block: prevent block device lookups at the beginning of del_gendisk
  nvme-fc: clear q_live at beginning of association teardown
  nvme-tcp: rerun io_work if req_list is not empty
  nvme-tcp: fix possible use-after-completion
  nvme-loop: fix memory leak in nvme_loop_create_ctrl()
  nvmet: fix memory leak in nvmet_alloc_ctrl()

Pull io_uring fixes from Jens Axboe:
 "One fix for a regression with poll in this merge window, and another
  just hardens the io-wq exit path a bit"

* tag 'io_uring-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
  io_uring: fortify tctx/io_wq cleanup
  io_uring: don't modify req->poll for rw