Update email address in MAINTAINERS file due to IT infrastructure changes
at Samsung.

Link: http://lkml.kernel.org/r/20180501212815.25911-1-shuah@kernel.org


Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull power management fixes from Rafael Wysocki:
 "These fix two PCI power management regressions from the 4.13 cycle and
  one cpufreq schedutil governor bug introduced during the 4.12 cycle,
  drop a stale comment from the schedutil code and fix two mistakes in
  docs.

  Specifics:

   - Restore device_may_wakeup() check in pci_enable_wake() removed
     inadvertently during the 4.13 cycle to prevent systems from drawing
     excessive power when suspended or off, among other things (Rafael
     Wysocki).

   - Fix pci_dev_run_wake() to properly handle devices that only can
     signal PME# when in the D3cold power state (Kai Heng Feng).

   - Fix the schedutil cpufreq governor to avoid using UINT_MAX as the
     new CPU frequency in some cases due to a missing check (Rafael
     Wysocki).

   - Remove a stale comment regarding worker kthreads from the schedutil
     cpufreq governor (Juri Lelli).

   - Fix a copy-paste mistake in the intel_pstate driver documentation
     (Juri Lelli).

   - Fix a typo in the system sleep states documentation (Jonathan
     Neuschäfer)"

* tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI / PM: Check device_may_wakeup() in pci_enable_wake()
  PCI / PM: Always check PME wakeup capability for runtime wakeup support
  cpufreq: schedutil: Avoid using invalid next_freq
  cpufreq: schedutil: remove stale comment
  PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
  PM: docs: sleep-states: Fix a typo ("includig")

Pull mtd fixes from Boris Brezillon:

 - make nand_soft_waitrdy() wait tWB before polling the status REG

 - fix BCH write in the the Marvell NAND controller driver

 - fix wrong picosec to msec conversion in the Marvell NAND controller
   driver

 - fix DMA handling in the TI OneNAND controllre driver

* tag 'mtd/fixes-for-4.17-rc5' of git://git.infradead.org/linux-mtd:
  mtd: rawnand: Make sure we wait tWB before polling the STATUS reg
  mtd: rawnand: marvell: fix command xtype in BCH write hook
  mtd: rawnand: marvell: pass ms delay to wait_op
  mtd: onenand: omap2: Disable DMA for HIGHMEM buffers

Pull drm fixes from Dave Airlie:
 "nouveau, amdgpu, i915, vc4, omap, exynos and atomic fixes.

  As last week seemed a bit slow, we got a few more fixes this week.

  The main stuff is two weeks of fixes for amdgpu, some missing bits of
  vega12 atom firmware support were added, and some power management
  fixes.

  Nouveau got two regression fixes for an DP MST deadlock and a random
  oops fix.

  i915 got an LVDS panel timeout fix 2 WARN fixes.

  exynos fixed a pagefault issue in the mixer driver.

  vc4 has an oops fix.

  omap had a bunch of uninit var and error-checking fixes. Two atomic
  modesetting state fixes.

  One minor agp cleanup patch"

* tag 'drm-fixes-for-v4.17-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/amd/pp: Fix performance drop on Fiji
  drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
  drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client
  agp: uninorth: make two functions static
  drm/amd/pp: Refine the output of pp_power_profile_mode on VI
  drm/amdgpu: Switch to interruptable wait to recover from ring hang.
  drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages
  drm/amd/display: Use kvzalloc for potentially large allocations
  drm/amd/display: Don't return ddc result and read_bytes in same return value
  drm/amd/display: Add get_firmware_info_v3_2 for VG12
  drm/amd: Add BIOS smu_info v3_3 required struct def.
  drm/amd/display: Add VG12 ASIC IDs
  drm/vc4: Fix scaling of uni-planar formats
  drm/exynos: hdmi: avoid duplicating drm_bridge_attach
  drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
  drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout
  drm/i915: Adjust eDP's logical vco in a reliable place.
  drm/bridge/sii8620: add Kconfig dependency on extcon
  drm/omap: handle alloc failures in omap_connector
  drm/omap: add missing linefeeds to prints
  ...

* pm-pci:
  PCI / PM: Check device_may_wakeup() in pci_enable_wake()
  PCI / PM: Always check PME wakeup capability for runtime wakeup support

* pm-docs:
  PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
  PM: docs: sleep-states: Fix a typo ("includig")

Commit 3a4d44b6 ("ntp: Move adjtimex related compat syscalls to
native counterparts") removed the memset() in compat_get_timex().  Since
then, the compat adjtimex syscall can invoke do_adjtimex() with an
uninitialized ->tai.

If do_adjtimex() doesn't write to ->tai (e.g.  because the arguments are
invalid), compat_put_timex() then copies the uninitialized ->tai field
to userspace.

Fix it by adding the memset() back.

Fixes: 3a4d44b6

 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Single amdgpu regression fix

* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/pp: Fix performance drop on Fiji

Merge tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - a stable fix for DM integrity to use kvfree

 - fix for a 4.17-rc1 change to dm-bufio's buffer alignment

 - fixes for a few sparse warnings

 - remove VLA usage in DM mirror target

 - improve DM thinp Documentation for the "read_only" feature

* tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: update Documentation to clarify when "read_only" is valid
  dm mirror: remove VLA usage
  dm: fix some sparse warnings and whitespace in dax methods
  dm cache background tracker: fix sparse warning
  dm bufio: fix buffer alignment
  dm integrity: use kvfree for kvmalloc'd memory

Due to user confusion, clarify that it doesn't make sense to try to
create a thin-pool with "read_only" mode enabled.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Commit 0847684c (PCI / PM: Simplify device wakeup settings code)
went too far and dropped the device_may_wakeup() check from
pci_enable_wake() which causes wakeup to be enabled during system
suspend, hibernation or shutdown for some PCI devices that are not
allowed by user space to wake up the system from sleep (or power off).

As a result of this, excessive power is drawn by some of the affected
systems while in sleep states or off.

Restore the device_may_wakeup() check in pci_enable_wake(), but make
sure that the PCI bus type's runtime suspend callback will not call
device_may_wakeup() which is about system wakeup from sleep and not
about device wakeup from runtime suspend.

Fixes: 0847684c

 (PCI / PM: Simplify device wakeup settings code)
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

The performance drop if the default TDP more than 256 Watt

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

NAND chips require a bit of time to take the NAND operation into
account and set the BUSY bit in the STATUS reg. Make sure we don't poll
the STATUS reg too early in nand_soft_waitrdy().

Fixes: 8878b126

 ("mtd: nand: add ->exec_op() implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>

Two nouveau crasher/deadlock fixes.

* 'linux-4.17' of git://github.com/skeggsb/linux:
  drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
  drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client

Currently; we're grabbing all of the modesetting locks before adding MST
connectors to fbdev. This isn't actually necessary, and causes a
deadlock as well:

======================================================
WARNING: possible circular locking dependency detected
4.17.0-rc3Lyude-Test+ #1 Tainted: G           O
------------------------------------------------------
kworker/1:0/18 is trying to acquire lock:
00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]

but task is already holding lock:
00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (crtc_ww_class_mutex){+.+.}:
       ww_mutex_lock+0x43/0x80
       drm_modeset_lock+0x71/0x130 [drm]
       drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper]
       drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper]
       __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
       nouveau_fbcon_init+0x138/0x1a0 [nouveau]
       nouveau_drm_load+0x173/0x7e0 [nouveau]
       drm_dev_register+0x134/0x1c0 [drm]
       drm_get_pci_dev+0x8e/0x160 [drm]
       nouveau_drm_probe+0x1a9/0x230 [nouveau]
       pci_device_probe+0xcd/0x150
       driver_probe_device+0x30b/0x480
       __driver_attach+0xbc/0xe0
       bus_for_each_dev+0x67/0x90
       bus_add_driver+0x164/0x260
       driver_register+0x57/0xc0
       do_one_initcall+0x4d/0x323
       do_init_module+0x5b/0x1f8
       load_module+0x20e5/0x2ac0
       __do_sys_finit_module+0xb7/0xd0
       do_syscall_64+0x60/0x1b0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #2 (crtc_ww_class_acquire){+.+.}:
       drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper]
       drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper]
       __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
       nouveau_fbcon_init+0x138/0x1a0 [nouveau]
       nouveau_drm_load+0x173/0x7e0 [nouveau]
       drm_dev_register+0x134/0x1c0 [drm]
       drm_get_pci_dev+0x8e/0x160 [drm]
       nouveau_drm_probe+0x1a9/0x230 [nouveau]
       pci_device_probe+0xcd/0x150
       driver_probe_device+0x30b/0x480
       __driver_attach+0xbc/0xe0
       bus_for_each_dev+0x67/0x90
       bus_add_driver+0x164/0x260
       driver_register+0x57/0xc0
       do_one_initcall+0x4d/0x323
       do_init_module+0x5b/0x1f8
       load_module+0x20e5/0x2ac0
       __do_sys_finit_module+0xb7/0xd0
       do_syscall_64+0x60/0x1b0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #1 (&dev->mode_config.mutex){+.+.}:
       drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper]
       __drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
       nouveau_fbcon_init+0x138/0x1a0 [nouveau]
       nouveau_drm_load+0x173/0x7e0 [nouveau]
       drm_dev_register+0x134/0x1c0 [drm]
       drm_get_pci_dev+0x8e/0x160 [drm]
       nouveau_drm_probe+0x1a9/0x230 [nouveau]
       pci_device_probe+0xcd/0x150
       driver_probe_device+0x30b/0x480
       __driver_attach+0xbc/0xe0
       bus_for_each_dev+0x67/0x90
       bus_add_driver+0x164/0x260
       driver_register+0x57/0xc0
       do_one_initcall+0x4d/0x323
       do_init_module+0x5b/0x1f8
       load_module+0x20e5/0x2ac0
       __do_sys_finit_module+0xb7/0xd0
       do_syscall_64+0x60/0x1b0
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #0 (&helper->lock){+.+.}:
       __mutex_lock+0x70/0x9d0
       drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
       nv50_mstm_register_connector+0x2c/0x50 [nouveau]
       drm_dp_add_port+0x2f5/0x420 [drm_kms_helper]
       drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
       drm_dp_add_port+0x33f/0x420 [drm_kms_helper]
       drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
       drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper]
       drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper]
       process_one_work+0x20d/0x650
       worker_thread+0x3a/0x390
       kthread+0x11e/0x140
       ret_from_fork+0x3a/0x50

other info that might help us debug this:
Chain exists of:
  &helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex
 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(crtc_ww_class_mutex);
                               lock(crtc_ww_class_acquire);
                               lock(crtc_ww_class_mutex);
  lock(&helper->lock);

 *** DEADLOCK ***
5 locks held by kworker/1:0/18:
 #0: 000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650
 #1: 00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650
 #2: 00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm]
 #3: 00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm]
 #4: 00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]

stack backtrace:
CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G           O      4.17.0-rc3Lyude-Test+ #1
Hardware name: Gateway FX6840/FX6840, BIOS P01-A3         05/17/2010
Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
Call Trace:
 dump_stack+0x85/0xcb
 print_circular_bug.isra.38+0x1ce/0x1db
 __lock_acquire+0x128f/0x1350
 ? lock_acquire+0x9f/0x200
 ? lock_acquire+0x9f/0x200
 ? __ww_mutex_lock.constprop.13+0x8f/0x1000
 lock_acquire+0x9f/0x200
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 __mutex_lock+0x70/0x9d0
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 ? ww_mutex_lock+0x43/0x80
 ? _cond_resched+0x15/0x30
 ? ww_mutex_lock+0x43/0x80
 ? drm_modeset_lock+0xb2/0x130 [drm]
 ? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
 nv50_mstm_register_connector+0x2c/0x50 [nouveau]
 drm_dp_add_port+0x2f5/0x420 [drm_kms_helper]
 ? mark_held_locks+0x50/0x80
 ? kfree+0xcf/0x2a0
 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper]
 ? trace_hardirqs_on_caller+0xed/0x180
 ? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper]
 drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
 drm_dp_add_port+0x33f/0x420 [drm_kms_helper]
 ? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau]
 ? find_held_lock+0x2d/0x90
 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper]
 ? __mutex_unlock_slowpath+0x3b/0x280
 ? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper]
 drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
 drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper]
 drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper]
 process_one_work+0x20d/0x650
 worker_thread+0x3a/0x390
 ? process_one_work+0x650/0x650
 kthread+0x11e/0x140
 ? kthread_create_worker_on_cpu+0x50/0x50
 ret_from_fork+0x3a/0x50

Taking example from i915, the only time we need to hold any modesetting
locks is when changing the port on the mstc, and in that case we only
need to hold the connection mutex.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: Lyude Paul <lyude@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Potentially responsible for some random OOPSes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v4.15+]

A little bigger than normal since this is two weeks of fixes.
- Atom firmware table updates for vega12
- Fix fallout from huge page support
- Fix up smu7 power profile interface to be consistent with vega
- Misc other fixes

* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/pp: Refine the output of pp_power_profile_mode on VI
  drm/amdgpu: Switch to interruptable wait to recover from ring hang.
  drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages
  drm/amd/display: Use kvzalloc for potentially large allocations
  drm/amd/display: Don't return ddc result and read_bytes in same return value
  drm/amd/display: Add get_firmware_info_v3_2 for VG12
  drm/amd: Add BIOS smu_info v3_3 required struct def.
  drm/amd/display: Add VG12 ASIC IDs

atomic: Clear state pointers on clear (Ville)
vc4: Fix oops in dpi disable (Eric)
omap: Various error-checking + uninitialized var fixes (Tomi)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>

* tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc:
  drm/vc4: Fix scaling of uni-planar formats
  drm/bridge/sii8620: add Kconfig dependency on extcon
  drm/omap: handle alloc failures in omap_connector
  drm/omap: add missing linefeeds to prints
  drm/omap: handle error if scale coefs are not found
  drm/omap: check return value from soc_device_match
  drm/omap: fix possible NULL ref issue in tiler_reserve_2d
  drm/omap: fix uninitialized ret variable
  drm/omap: silence unititialized variable warning
  drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge.
  drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear()
  drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()

Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Increase LVDS panel timeout to 5s to avoid spurious *ERROR*
- Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch

* tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
  drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout
  drm/i915: Adjust eDP's logical vco in a reliable place.

Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.

* tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: hdmi: avoid duplicating drm_bridge_attach
  drm/exynos: mixer: avoid Oops in vp_video_buffer()
  drm/exynos/mixer: fix synchronization check in interlaced mode

Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made
static. So make them.

Silence the following gcc warning (W=1):

  drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes]

and

  drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull HID fixes from Jiri Kosina:

 - quirk for Toshiba Click Mini L9W-B, from Hans de Goede

 - intel-ish-hid and wacom error handling (device freeing) path fixes
   from Arvind Yadav

 - memory corruption fix in intel-ish-hid driver from Hans de Goede

 - a few new device ID additions to hid-lenovo from Peter Ganzhorn

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B
  HID: intel-ish-hid: use put_device() instead of kfree()
  HID: intel_ish-hid: Stop using a static local buffer in get_report()
  HID: intel_ish-hid: Move header size check to inside the loop
  HID: wacom: Release device resource data obtained by devres_alloc()
  HID: lenovo: Add support for IBM/Lenovo Scrollpoint mice

In order to keep consist with Vega,
the output format of the pp_power_profile_mode would be
<integer><mode name string>< “*” for current profile>:"detail settings"
and remove the "CURRENT" mode line.

for example:
NUM        MODE_NAME     SCLK_UP_HYST   SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL     MCLK_UP_HYST   MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
  0   3D_FULL_SCREEN:        0              100               30                0              100               10
  1     POWER_SAVING:       10                0               30                -                -                -
  2            VIDEO:        -                -                -               10               16               31
  3               VR:        0               11               50                0              100               10
  4          COMPUTE:        0                5               30                -                -                -
  5         CUSTOM *:        0                5               30                0              100               10
NUM        MODE_NAME     SCLK_UP_HYST   SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL     MCLK_UP_HYST   MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
  0   3D_FULL_SCREEN:        0              100               30                0              100               10
  1   POWER_SAVING *:       10                0               30                0              100               10
  2            VIDEO:        -                -                -               10               16               31
  3               VR:        0               11               50                0              100               10
  4          COMPUTE:        0                5               30                -                -                -
  5           CUSTOM:        -                -                -                -                -                -

Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2:
Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT)
Avoid printing error message for ERESTARTSYS

Originally-by: David Panariti <David.Panariti@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GFP_TRANSHUGE tries very hard to allocate huge pages, which can result
in long delays with high memory pressure. I have observed firefox
freezing for up to around a minute due to this while restic was taking
a full system backup.

Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT |
__GFP_NORETRY instead, in order to fail quickly when there are no huge
pages available.

Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed
up in the background if necessary.

With these changes, I'm no longer seeing freezes during a restic backup.

Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocating up to 32 physically contiguous pages can easily fail (and has
failed for me), and isn't necessary anyway.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The two ranges overlap.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs
to have a report-decriptors command send to it on resume in order for
the touchscreen to start generating events again on resume.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

USB controller ASM1042 stops working after commit de3ef1eb (PM /
core: Drop run_wake flag from struct dev_pm_info).

The device in question is not power managed by platform firmware,
furthermore, it only supports PME# from D3cold:
Capabilities: [78] Power Management version 3
       Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
       Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Before commit de3ef1eb, the device never gets runtime suspended.
After that commit, the device gets runtime suspended to D3hot, which can
not generate any PME#.

usb_hcd_pci_probe() unconditionally calls device_wakeup_enable(), hence
device_can_wakeup() in pci_dev_run_wake() always returns true.

So pci_dev_run_wake() needs to check PME wakeup capability as its first
condition.

In addition, change wakeup flag passed to pci_target_state() from false
to true, because we want to find the deepest state different from D3cold
that the device can still generate PME#. In this case, it's D0 for the
device in question.

Fixes: de3ef1eb

 (PM / core: Drop run_wake flag from struct dev_pm_info)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If the next_freq field of struct sugov_policy is set to UINT_MAX,
it shouldn't be used for updating the CPU frequency (this is a
special "invalid" value), but after commit b7eaf1aa (cpufreq:
schedutil: Avoid reducing frequency of busy CPUs prematurely) it
may be passed as the new frequency to sugov_update_commit() in
sugov_update_single().

Fix that by adding an extra check for the special UINT_MAX value
of next_freq to sugov_update_single().

Fixes: b7eaf1aa

 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit 794a56eb

 (sched/cpufreq: Change the worker kthread to
SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency
selection point of view, so the potential corner case for RT tasks is not
possible at all now.

Remove the stale comment mentioning it.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

P-state selection algorithm (powersave or performance) is selected by
echoing the desired choice to scaling_governor sysfs attribute and not
to scaling_cur_freq (as currently stated).

Fix it.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix a typo in admin-guide/pm/sleep-states.rst.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When using uni-planar formats (like RGB), the scaling parameters are
stored in plane 0, not plane 1.

Fixes: fc04023f

 ("drm/vc4: Add support for YUV planes.")
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com

drm_bridge_attach takes care of these assignments, so there is no need
to open-code them a second time.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Pull libata fixes from Tejun Heo:
 "An earlier commit to add reset control for embedded ahci controllers
  affected some of the hardware specific drivers and got reverted for
  now.

  Other than that, just per-device workarounds and trivial changes"

* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  driver core: add __printf verification to __ata_ehi_pushv_desc
  ata: fix spelling mistake: "directon" -> "direction"
  libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
  libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD
  ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI
  libahci: Allow drivers to override stop_engine
  Revert "ata: ahci-platform: add reset control support"

Pull pin control fixes from Linus Walleij:
 "Here are three pin control fixes.

  The Intel fixes are the most serious and important things I had queued
  since it affects a large portion of deployed Chromebooks.

   - Two major fixes for the Intel Cherryview and Sunrisepoint pin
     controllers, adjusting numberspaces so that they get aligned with
     various messed-up numbers encoded into the BIOS.

   - A fix for the Meson driver GPIO pin range"

* tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunrisepoint: Align GPIO number space with Windows
  pinctrl: cherryview: Associate IRQ descriptors to irqdomain
  pinctrl: meson-axg: fix the range of aobus bank

Pull GPIO fixes from Linus Walleij:
 "Sorry for lagging behind on sending the first batch of GPIO fixes for
  this cycle. Just too busy conferencing and the weather was too nice.

  Here it is anyway: some real important polishing on the error path
  facing userspace (tagged for stable as well) and some normal driver
  fixes.

   - Fix proper IRQ unmasking in the Aspeed driver.

   - Do not free unrequested descriptors on the errorpath when creating
     line handles from the userspace chardev requested GPIO lines.

   - Also fix the errorpath in the linehandle creation function.

   - Fix the get/set multiple GPIO lines for a few of the funky
     industrial GPIO cards on the ISA bus"

* tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pcie-idio-24: Fix off-by-one error in get_multiple loop
  gpio: pcie-idio-24: Fix port memory offset for get_multiple/set_multiple callbacks
  gpio: pci-idio-16: Fix port memory offset for get_multiple callback
  gpio: fix error path in lineevent_create
  gpioib: do not free unrequested descriptors
  gpio: fix aspeed_gpio unmask irq