These enums are passed to set/test_bit().  The set/test_bit() functions
take a bit number instead of a shifted value.  Passing a shifted value
is a double shift bug like doing BIT(BIT(1)).  The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The PWMF_REQUESTED enum is supposed to be used with test_bit() and not
used as in a bitwise AND.  In this specific code the flag will never be
set so the function is effectively a no-op.

Fixes: e3fe982b

 ("pwm: samsung: Put per-channel data into driver data")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

My earlier commit reworking how driver data is tracked added a new
member to struct samsung_pwm_chip but failed to add matching
documentation. Make up leeway.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310130404.uQ33q5Dk-lkp@intel.com/
Fixes: e3fe982b

 ("pwm: samsung: Put per-channel data into driver data")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Similar to other drivers, we need to make sure that the clock is
disabled during suspend and re-enabled during resume.

Reported-by: Angus Clark <angus.clark@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Check the clk_prepare_enable() return value and propagate it.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The suspend/resume functions currently utilize
clk_disable()/clk_enable() respectively which may be no-ops with certain
clock providers such as SCMI. Fix this to use clk_disable_unprepare()
and clk_prepare_enable() respectively as we should.

Fixes: 3a9f5957

 ("pwm: Add Broadcom BCM7038 PWM controller support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Using devm_pwmchip_add() allows to drop pwmchip_remove() from the remove
function which makes this function empty. Then there is no user of
drvdata left and platform_set_drvdata() can be dropped, too.

Further simplify and improve error returning using dev_err_probe().

Link: https://lore.kernel.org/r/20230929161918.2410424-12-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The driver uses mostly "chip" to name samsung_pwm_chip pointers:

$ git grep -Pho 'samsung_pwm_chip \*[a-zA-Z0-9_]+(*nla:[a-zA-Z0-9_(])' v6.5-rc1 -- drivers/pwm/pwm-samsung.c | sort | uniq -c
     10 samsung_pwm_chip *chip
      6 samsung_pwm_chip *our_chip
      1 samsung_pwm_chip *pwm

However "chip" is supposed to be used for struct pwm_chip pointers and
"pwm" for struct pwm_device pointers. So consistently use "our_chip".

Link: https://lore.kernel.org/r/20230929161918.2410424-11-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_prepared() the call to clk_unprepare() can be dropped
from the error path and the remove callback. With devm_pwmchip_add()
pwmchip_remove() can be dropped. Then the remove callback is empty and
can go away, too. With vt8500_pwm_remove() the last user of
platform_get_drvdata() is gone and so platform_set_drvdata() can be
dropped, too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-10-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Using devm_pwmchip_add() allows to drop pwmchip_remove() from the remove
function which makes this function empty. Then there is no user of
drvdata left and platform_set_drvdata() can be dropped, too.

Further simplify and improve error returning using dev_err_probe().

Link: https://lore.kernel.org/r/20230929161918.2410424-9-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Similar to most other PWM drivers provide a static inline function to
calculate driver data from a given pwmchip.

Link: https://lore.kernel.org/r/20230929161918.2410424-8-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_prepared() the call to clk_unprepare() can be dropped
from the error path and the remove callback. With devm_pwmchip_add()
pwmchip_remove() can be dropped. Then the remove callback is empty and
can go away, too. With spear_pwm_remove() the last user of
platform_get_drvdata() is gone and so platform_set_drvdata() can be
dropped, too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-7-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_pwmchip_add() pwmchip_remove() can be dropped from the remove
callback. Then the remove callback is empty and can go away, too. With
mtk_disp_pwm_remove() the last user of platform_get_drvdata() is gone and
so platform_set_drvdata() can be dropped, too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-6-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-5-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-4-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too. With bcm2835_pwm_remove() the only
user of platform_get_drvdata() is gone and so platform_set_drvdata() can
be dropped from .probe(), too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-3-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Link: https://lore.kernel.org/r/20230929161918.2410424-2-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Most low-level PWM drivers support duty_cycle == period, and so does the
sysfs API. Also polarity can be changed for enabled PWMs since commit
39100cee

 ("pwm: Switch to the atomic API").

Reported-by: Jens Gehrlein <J.Gehrlein@eckelmann.de>
Link: https://lore.kernel.org/r/20230911154454.675057-1-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

If we are not in PWM mode, then the output is technically a 50%
output based on a single timer instead of the high-low based on
the two counters. Add a check for the PWM mode in dwc_pwm_get_state()
and if DWC_TIM_CTRL_PWM is not set, then return a 50% cycle.

This may only be an issue on initialisation, as the rest of the
code currently assumes we're always going to have the extended
PWM mode using two counters.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230907161242.67190-4-ben.dooks@codethink.co.uk


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Add a configurable clock base rate for the pwm as when being built
for non-PCI the block may be sourced from an internal clock.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230907161242.67190-3-ben.dooks@codethink.co.uk


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Moving towards adding non-pci support for the driver, move the pci
parts out of the core into their own module. This is partly due to
the module_driver() code only being allowed once in a module and also
to avoid a number of #ifdef if we build a single file in a system
without pci support.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230907161242.67190-2-ben.dooks@codethink.co.uk


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too.

Link: https://lore.kernel.org/r/20230718175545.3946935-1-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The semantic of chip_data is a bit surprising as it's cleared when
pwm_put() is called. Also there is a big overlap with the standard driver
data.

All drivers were adapted to not make use of chip_data any more, so it can
go away.

Link: https://lore.kernel.org/r/20230705080650.2353391-9-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of an allocation of a single u16 per channel, allocate them all in
a single chunk which greatly reduces memory fragmentation and also the
overhead to track the allocated memory. Also put the channel data in
driver data where it's cheaper to determine the address (no function call
involved, just a trivial pointer addition).

This also allows to get rid of the request and free callbacks.

The only cost is that the channel data is allocated early, and even for
unused channels.

Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20230705080650.2353391-8-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of using one allocation per capture channel, use a single one. Also
store it in driver data instead of chip data.

This has several advantages:

 - driver data isn't cleared when pwm_put() is called
 - Reduces memory fragmentation

Also register the pwm chip only after the per capture channel data is
initialized as the capture callback relies on this initialization and it
might be called even before pwmchip_add() returns.

It would be still better to have struct sti_pwm_compat_data and the
per-channel data struct sti_cpt_ddata in a single memory chunk, but that's
not easily possible because the number of capture channels isn't known yet
when the driver data struct is allocated.

Fixes: e926b12c

 ("pwm: Clear chip_data in pwm_put()")
Reported-by: George Stark <gnstark@sberdevices.ru>
Fixes: c97267ae ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20230705080650.2353391-7-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of distributing the driver's bookkeeping over 5 (i.e.
TPU_CHANNEL_MAX + 1) separately allocated memory chunks, put all together
in struct tpu_device. This reduces the number of memory allocations and
so fragmentation and maybe even the number of cache misses. Also
&tpu->tpd[pwm->hwpwm] is cheaper to evaluate than pwm_get_chip_data(pwm)
as the former is just an addition in machine code while the latter involves
a function call.

Link: https://lore.kernel.org/r/20230705080650.2353391-6-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of distributing the driver's bookkeeping over 3 (i.e.
LP3943_NUM_PWMS + 1) separately allocated memory chunks, put all together
in struct lp3943_pwm. This reduces the number of memory allocations and
so fragmentation and maybe even the number of cache misses. Also
&lp3943_pwm->pwm_map[pwm->hwpwm] is cheaper to evaluate than
pwm_get_chip_data(pwm) as the former is just an addition in machine code
while the latter involves a function call.

Link: https://lore.kernel.org/r/20230705080650.2353391-5-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Stop using chip_data which is about to go away. Instead track the
per-channel clk in struct jz4740_pwm_chip.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230705080650.2353391-4-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of allocating extra data in .request() provide the needed memory
in struct samsung_pwm_chip. This reduces the number of allocations. Even
though now all 5 channel structs are allocated this is probably
outweighed by the reduced overhead to track up to 6 smaller allocations.

Link: https://lore.kernel.org/r/20230705080650.2353391-3-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of allocating extra data in .request() provide the needed memory
in struct berlin_pwm_chip. This reduces the number of allocations. A
side effect is that on suspend and resume the state for all four
channels is always saved and restored. This is easier (and probably
quicker) than looking up the matching pwm_device and checking its
PWMF_REQUESTED bit.

Link: https://lore.kernel.org/r/20230705080650.2353391-2-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The driver compiles just fine as a module. The parent driver's Kconfig
symbol already depends on X86 || COMPILE_TEST, so X86 can just be
dropped from the dependencies allowing compilation on other platforms
than x86.

Link: https://lore.kernel.org/r/20230804142707.412137-3-u.kleine-koenig@pengutronix.de


Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.

The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.

Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Most but not all pointers to driver data are already called "jz":

	$ git grep 'struct jz4740_pwm_chip \*' v6.5-rc1 -- drivers/pwm/pwm-jz4740.c
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:static bool jz4740_pwm_can_use_chn(struct jz4740_pwm_chip *jz,
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:      struct jz4740_pwm_chip *jz = to_jz4740(chip);
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:      struct jz4740_pwm_chip *jz = to_jz4740(chip);
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:      struct jz4740_pwm_chip *jz = to_jz4740(chip);
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:      struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
	v6.5-rc1:drivers/pwm/pwm-jz4740.c:      struct jz4740_pwm_chip *jz4740;

Adapt the two variables called "jz4740" to use the same name for
consistency.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230808062608.897710-1-u.kleine-koenig@pengutronix.de


Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
PWM driver to use the new symbol.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The 'clocks' property is mandatory for the PWM to operate.

Document it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

imx28 uses the same PWM block that is found on imx23.

Add an entry for fsl,imx28-pwm.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

The driver depends on CONFIG_OF, it is not necessary to use
of_match_ptr() here.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>