* kvm-arm64/pkvm/fixed-features: (22 commits)
  : .
  : Add the pKVM fixed feature that allows a bunch of exceptions
  : to either be forbidden or be easily handled at EL2.
  : .
  KVM: arm64: pkvm: Give priority to standard traps over pvm handling
  KVM: arm64: pkvm: Pass vpcu instead of kvm to kvm_get_exit_handler_array()
  KVM: arm64: pkvm: Move kvm_handle_pvm_restricted around
  KVM: arm64: pkvm: Consolidate include files
  KVM: arm64: pkvm: Preserve pending SError on exit from AArch32
  KVM: arm64: pkvm: Handle GICv3 traps as required
  KVM: arm64: pkvm: Drop sysregs that should never be routed to the host
  KVM: arm64: pkvm: Drop AArch32-specific registers
  KVM: arm64: pkvm: Make the ERR/ERX*_EL1 registers RAZ/WI
  KVM: arm64: pkvm: Use a single function to expose all id-regs
  KVM: arm64: Fix early exit ptrauth handling
  KVM: arm64: Handle protected guests at 32 bits
  KVM: arm64: Trap access to pVM restricted features
  KVM: arm64: Move sanitized copies of CPU features
  KVM: arm64: Initialize trap registers for protected VMs
  KVM: arm64: Add handlers for protected VM System Registers
  KVM: arm64: Simplify masking out MTE in feature id reg
  KVM: arm64: Add missing field descriptor for MDCR_EL2
  KVM: arm64: Pass struct kvm to per-EC handlers
  KVM: arm64: Move early handlers to per-EC handlers
  ...

Signed-off-by: Marc Zyngier <maz@kernel.org>

Checking for pvm handling first means that we cannot handle ptrauth
traps or apply any of the workarounds (GICv3 or TX2 #219).

Flip the order around.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-12-maz@kernel.org

Passing a VM pointer around is odd, and results in extra work on
VHE. Follow the rest of the design that uses the vcpu instead, and
let the nVHE code look into the struct kvm as required.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-11-maz@kernel.org

Place kvm_handle_pvm_restricted() next to its little friends such
as kvm_handle_pvm_sysreg().

This allows to make inject_undef64() static.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-10-maz@kernel.org

kvm_fixed_config.h is pkvm specific, and would be better placed
near its users. At the same time, include/nvhe/sys_regs.h is now
almost empty.

Merge the two into arch/arm64/kvm/hyp/include/nvhe/fixed_config.h.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-9-maz@kernel.org

Don't drop a potential SError when a guest gets caught red-handed
running AArch32 code.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-8-maz@kernel.org

Forward accesses to the ICV_*SGI*_EL1 registers to EL1, and
emulate ICV_SRE_EL1 by returning a fixed value.

This should be enough to support GICv3 in a protected guest.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-7-maz@kernel.org

A bunch of system registers (most of them MM related) should never
trap to the host under any circumstance. Keep them close to our chest.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-6-maz@kernel.org

All the SYS_*32_EL2 registers are AArch32-specific. Since we forbid
AArch32, there is no need to handle those in any way.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-5-maz@kernel.org

The ERR*/ERX* registers should be handled as RAZ/WI, and there
should be no need to involve EL1 for that.

Add a helper that handles such registers, and repaint the sysreg
table to declare these registers as RAZ/WI.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-4-maz@kernel.org

Rather than exposing a whole set of helper functions to retrieve
individual ID registers, use the existing decoding tree and expose
a single helper instead.

This allow a number of functions to be made static, and we now
have a single entry point to maintain.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-3-maz@kernel.org

The previous rework of the early exit code to provide an EC-based
decoding tree missed the fact that we have two trap paths for
ptrauth: the instructions (EC_PAC) and the sysregs (EC_SYS64).

Rework the handlers to call the ptrauth handling code on both
paths.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211013120346.2926621-2-maz@kernel.org

* kvm-arm64/memory-accounting:
  : .
  : Sprinkle a bunch of GFP_KERNEL_ACCOUNT all over the code base
  : to better track memory allocation made on behalf of a VM.
  : .
  KVM: arm64: Add memcg accounting to KVM allocations
  KVM: arm64: vgic: Add memcg accounting to vgic allocations

Signed-off-by: Marc Zyngier <maz@kernel.org>

Inspired by commit 254272ce

 ("kvm: x86: Add memcg accounting to KVM
allocations"), it would be better to make arm64 KVM consistent with
common kvm codes.

The memory allocations of VM scope should be charged into VM process
cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT.

There remain a few cases since these allocations are global, not in VM
scope.

Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210907123112.10232-3-justin.he@arm.com

Inspired by commit 254272ce

 ("kvm: x86: Add memcg accounting to KVM
allocations"), it would be better to make arm64 vgic consistent with
common kvm codes.

The memory allocations of VM scope should be charged into VM process
cgroup, hence change GFP_KERNEL to GFP_KERNEL_ACCOUNT.

There remain a few cases since these allocations are global, not in VM
scope.

Signed-off-by: Jia He <justin.he@arm.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210907123112.10232-2-justin.he@arm.com

* kvm-arm64/selftest/timer:
  : .
  : Add a set of selftests for the KVM/arm64 timer emulation.
  : Comes with a minimal GICv3 infrastructure.
  : .
  KVM: arm64: selftests: arch_timer: Support vCPU migration
  KVM: arm64: selftests: Add arch_timer test
  KVM: arm64: selftests: Add host support for vGIC
  KVM: arm64: selftests: Add basic GICv3 support
  KVM: arm64: selftests: Add light-weight spinlock support
  KVM: arm64: selftests: Add guest support to get the vcpuid
  KVM: arm64: selftests: Maintain consistency for vcpuid type
  KVM: arm64: selftests: Add support to disable and enable local IRQs
  KVM: arm64: selftests: Add basic support to generate delays
  KVM: arm64: selftests: Add basic support for arch_timers
  KVM: arm64: selftests: Add support for cpu_relax
  KVM: arm64: selftests: Introduce ARM64_SYS_KVM_REG
  tools: arm64: Import sysreg.h
  KVM: arm64: selftests: Add MMIO readl/writel support

Signed-off-by: Marc Zyngier <maz@kernel.org>

Since the timer stack (hardware and KVM) is per-CPU, there
are potential chances for races to occur when the scheduler
decides to migrate a vCPU thread to a different physical CPU.
Hence, include an option to stress-test this part as well by
forcing the vCPUs to migrate across physical CPUs in the
system at a particular rate.

Originally, the bug for the fix with commit 3134cc8b


("KVM: arm64: vgic: Resample HW pending state on deactivation")
was discovered using arch_timer test with vCPU migrations and
can be easily reproduced.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-16-rananta@google.com

Add a KVM selftest to validate the arch_timer functionality.
Primarily, the test sets up periodic timer interrupts and
validates the basic architectural expectations upon its receipt.

The test provides command-line options to configure the period
of the timer, number of iterations, and number of vCPUs.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-15-rananta@google.com

Implement a simple library to perform vGIC-v3 setup
from a host point of view. This includes creating a
vGIC device, setting up distributor and redistributor
attributes, and mapping the guest physical addresses.

The definition of REDIST_REGION_ATTR_ADDR is taken from
aarch64/vgic_init test. Hence, replace the definition
by including vgic.h in the test file.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-14-rananta@google.com

Add basic support for ARM Generic Interrupt Controller v3.
The support provides guests to setup interrupts.

The work is inspired from kvm-unit-tests and the kernel's
GIC driver (drivers/irqchip/irq-gic-v3.c).

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-13-rananta@google.com

Add a simpler version of spinlock support for ARM64 for
the guests to use.

The implementation is loosely based on the spinlock
implementation in kvm-unit-tests.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-12-rananta@google.com

At times, such as when in the interrupt handler, the guest wants
to get the vcpuid that it's running on to pull the per-cpu private
data. As a result, introduce guest_get_vcpuid() that returns the
vcpuid of the calling vcpu. The interface is architecture
independent, but defined only for arm64 as of now.

Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-11-rananta@google.com

The prototype of aarch64_vcpu_setup() accepts vcpuid as
'int', while the rest of the aarch64 (and struct vcpu)
carries it as 'uint32_t'. Hence, change the prototype
to make it consistent throughout the board.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-10-rananta@google.com

Add functions local_irq_enable() and local_irq_disable() to
enable and disable the IRQs from the guest, respectively.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-9-rananta@google.com

Add udelay() support to generate a delay in the guest.

The routines are derived and simplified from kernel's
arch/arm64/lib/delay.c.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-8-rananta@google.com

Add a minimalistic library support to access the virtual timers,
that can be used for simple timing functionalities, such as
introducing delays in the guest.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-7-rananta@google.com

Implement the guest helper routine, cpu_relax(), to yield
the processor to other tasks.

The function was derived from
arch/arm64/include/asm/vdso/processor.h.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-6-rananta@google.com

With the inclusion of sysreg.h, that brings in system register
encodings, it would be redundant to re-define register encodings
again in processor.h to use it with ARM64_SYS_REG for the KVM
functions such as set_reg() or get_reg(). Hence, add helper macro,
ARM64_SYS_KVM_REG, that converts SYS_* definitions in sysreg.h
into ARM64_SYS_REG definitions.

Also replace all the users of ARM64_SYS_REG, relying on
the encodings created in processor.h, with ARM64_SYS_KVM_REG and
remove the definitions.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-5-rananta@google.com

Bring-in the kernel's arch/arm64/include/asm/sysreg.h
into tools/ for arm64 to make use of all the standard
register definitions in consistence with the kernel.

Make use of the register read/write definitions from
sysreg.h, instead of the existing definitions. A syntax
correction is needed for the files that use write_sysreg()
to make it compliant with the new (kernel's) syntax.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
[maz: squashed two commits in order to keep the series bisectable]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-3-rananta@google.com
Link: https://lore.kernel.org/r/20211007233439.1826892-4-rananta@google.com

Define the readl() and writel() functions for the guests to
access (4-byte) the MMIO region.

The routines, and their dependents, are inspired from the kernel's
arch/arm64/include/asm/io.h and arch/arm64/include/asm/barrier.h.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211007233439.1826892-2-rananta@google.com

* kvm-arm64/vgic-fixes-5.16:
  : .
  : Multiple updates to the GICv3 emulation in order to better support
  : the dreadful Apple M1 that only implements half of it, and in a
  : broken way...
  : .
  KVM: arm64: vgic-v3: Align emulated cpuif LPI state machine with the pseudocode
  KVM: arm64: vgic-v3: Don't advertise ICC_CTLR_EL1.SEIS
  KVM: arm64: vgic-v3: Reduce common group trapping to ICV_DIR_EL1 when possible
  KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors
  KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3

Signed-off-by: Marc Zyngier <maz@kernel.org>

Having realised that a virtual LPI does transition through an active
state that does not exist on bare metal, align the CPU interface
emulation with the behaviour specified in the architecture pseudocode.

The LPIs now transition to active on IAR read, and to inactive on
EOI write. Special care is taken not to increment the EOIcount for
an LPI that isn't present in the LRs.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211010150910.2911495-6-maz@kernel.org

Since we are trapping all sysreg accesses when ICH_VTR_EL2.SEIS
is set, and that we never deliver an SError when emulating
any of the GICv3 sysregs, don't advertise ICC_CTLR_EL1.SEIS.

Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211010150910.2911495-5-maz@kernel.org

On systems that advertise ICH_VTR_EL2.SEIS, we trap all GICv3 sysreg
accesses from the guest. From a performance perspective, this is OK
as long as the guest doesn't hammer the GICv3 CPU interface.

In most cases, this is fine, unless the guest actively uses
priorities and switches PMR_EL1 very often. Which is exactly what
happens when a Linux guest runs with irqchip.gicv3_pseudo_nmi=1.
In these condition, the performance plumets as we hit PMR each time
we mask/unmask interrupts. Not good.

There is however an opportunity for improvement. Careful reading
of the architecture specification indicates that the only GICv3
sysreg belonging to the common group (which contains the SGI
registers, PMR, DIR, CTLR and RPR) that is allowed to generate
a SError is DIR. Everything else is safe.

It is thus possible to substitute the trapping of all the common
group with just that of DIR if it supported by the implementation.
Yes, that's yet another optional bit of the architecture.
So let's just do that, as it leads to some impressive result on
the M1:

Without this change:
	bash-5.1# /host/home/maz/hackbench 100 process 1000
	Running with 100*40 (== 4000) tasks.
	Time: 56.596

With this change:
	bash-5.1# /host/home/maz/hackbench 100 process 1000
	Running with 100*40 (== 4000) tasks.
	Time: 8.649

which is a pretty convincing result.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20211010150910.2911495-4-maz@kernel.org

The infamous M1 has a feature nobody else ever implemented,
in the form of the "GIC locally generated SError interrupts",
also known as SEIS for short.

These SErrors are generated when a guest does something that violates
the GIC state machine. It would have been simpler to just *ignore*
the damned thing, but that's not what this HW does. Oh well.

This part of of the architecture is also amazingly under-specified.
There is a whole 10 lines that describe the feature in a spec that
is 930 pages long, and some of these lines are factually wrong.
Oh, and it is deprecated, so the insentive to clarify it is low.

Now, the spec says that this should be a *virtual* SError when
HCR_EL2.AMO is set. As it turns out, that's not always the case
on this CPU, and the SError sometimes fires on the host as a
physical SError. Goodbye, cruel world. This clearly is a HW bug,
and it means that a guest can easily take the host down, on demand.

Thankfully, we have seen systems that were just as broken in the
past, and we have the perfect vaccine for it.

Apple M1, please meet the Cavium ThunderX workaround. All your
GIC accesses will be trapped, sanitised, and emulated. Only the
signalling aspect of the HW will be used. It won't be super speedy,
but it will at least be safe. You're most welcome.

Given that this has only ever been seen on this single implementation,
that the spec is unclear at best and that we cannot trust it to ever
be implemented correctly, gate the workaround solely on ICH_VTR_EL2.SEIS
being set.

Tested-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211010150910.2911495-3-maz@kernel.org

Until now, we always let ID_AA64PFR0_EL1.GIC reflect the value
visible on the host, even if we were running a GICv2-enabled VM
on a GICv3+compat host.

That's fine, but we also now have the case of a host that does not
expose ID_AA64PFR0_EL1.GIC==1 despite having a vGIC. Yes, this is
confusing. Thank you M1.

Let's go back to first principles and expose ID_AA64PFR0_EL1.GIC=1
when a GICv3 is exposed to the guest. This also hides a GICv4.1
CPU interface from the guest which has no business knowing about
the v4.1 extension.

Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211010150910.2911495-2-maz@kernel.org

* kvm-arm64/misc-5.16:
  : .
  : - Allow KVM to be disabled from the command-line
  : - Clean up CONFIG_KVM vs CONFIG_HAVE_KVM
  : - Fix endianess evaluation on MMIO access from EL0
  : .
  KVM: arm64: Fix reporting of endianess when the access originates at EL0

Signed-off-by: Marc Zyngier <maz@kernel.org>

We currently check SCTLR_EL1.EE when computing the address of
a faulting guest access. However, the fault could have occured at
EL0, in which case the right bit to check would be SCTLR_EL1.E0E.

This is pretty unlikely to cause any issue in practice: You'd have
to have a guest with a LE EL1 and a BE EL0 (or the other way around),
and have mapped a device into the EL0 page tables.

Good luck with that!

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211012112312.1247467-1-maz@kernel.org

* kvm-arm64/pkvm/restrict-hypercalls:
  : .
  : Restrict the use of some hypercalls as well as kexec once
  : the protected KVM mode has been initialised.
  : .
  Documentation: admin-guide: Document side effects when pKVM is enabled

Signed-off-by: Marc Zyngier <maz@kernel.org>

Recent changes to KVM for arm64 has made it impossible for the host to
hibernate or use kexec when protected mode is enabled via the kernel
command line.

There are people who rely on kexec (for example, developers who use kexec
as a quick way to test a new kernel), let's document this change in
behaviour, so it doesn't catch them by surprise and we have a place to
point people to if it does.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011153835.291147-1-alexandru.elisei@arm.com