All recent 40xx firmware already supports D0i3 entry message and this
WA is no longer needed.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-6-jacek.lawrynowicz@linux.intel.com

NPU does not require this delay regardless of the generation.
All generations are integrated into the SOC.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-4-jacek.lawrynowicz@linux.intel.com

Do not use kernel CIRC_SPACE and CIRC_CNT that
incorrectly return space of a queue when wrap bit was set.
Use correct implementation that compares producer, consumer and
wrap bit values.

Without this fix it was possible to lose events in case when event
queue was full.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-3-jacek.lawrynowicz@linux.intel.com

Set AW_SNOOP_OVERRIDE bit in VPU_37/40XX_HOST_IF_TCU_PTW_OVERRIDES
to force snooping for MMU write accesses (setting event queue events).

MMU event queue buffer is the only buffer written by MMU and
mapped as write-back which break cache coherency. Force write
transactions to be snooped solving the problem.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-2-jacek.lawrynowicz@linux.intel.com

Function nvkm_gsp_radix3_sg() uses nvkm_gsp_mem objects to allocate the
radix3 tables, but it unnecessarily creates those objects manually
instead of using the standard nvkm_gsp_mem_ctor() function like the
rest of the code does.

Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-2-ttabi@nvidia.com

Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects.  Several of
these buffers are never dealloced.  Some of them can be deallocated
right after GSP-RM is initialized, but the rest need to stay until the
driver unloads.

Also futher bullet-proof these objects by poisoning the buffer and
clearing the nvkm_gsp_mem object when it is deallocated.  Poisoning
the buffer should trigger an error (or crash) from GSP-RM if it tries
to access the buffer after we've deallocated it, because we were wrong
about when it is safe to deallocate.

Finally, change the mem->size field to a size_t because that's the same
type that dma_alloc_coherent expects.

Cc: <stable@vger.kernel.org> # v6.7
Fixes: 176fdcbd

 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-1-ttabi@nvidia.com

Timur pointed this out before, and it just slipped my mind,
but this might help some things work better, around pcie power
management.

Cc: <stable@vger.kernel.org> # v6.7
Fixes: 8d55b0a9

 ("nouveau/gsp: add some basic registry entries.")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130032643.2498315-1-airlied@gmail.com

Merge the last drm-misc-next-fixes tag that fell through the cracks.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

DMA buffers allocated from the CMA dma-buf heap get counted under
RssFile for processes that map them and trigger page faults. In
addition to the incorrect accounting reported to userspace, reclaim
behavior was influenced by the MM_FILEPAGES counter until linux 6.8, but
this memory is not reclaimable. [1] Change the CMA dma-buf heap to set
VM_PFNMAP on the VMA so MM does not poke at the memory managed by this
dma-buf heap, and use vmf_insert_pfn to correct the RSS accounting.

The system dma-buf heap does not suffer from this issue since
remap_pfn_range is used during the mmap of the buffer, which also sets
VM_PFNMAP on the VMA.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/mm/vmscan.c?id=fb46e22a9e3863e08aef8815df9f17d0f4b9aede

Fixes: b61614ec

 ("dma-buf: heaps: Add CMA heap to dmabuf heaps")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117181141.286383-1-tjmercier@google.com

Set the segment size of the virtio_gpu device to the value
used by the drm helpers when allocating sg lists to fix the
following complaint from DMA_API debug code:

DMA-API: virtio-pci 0000:07:00.0: mapping sg segment longer than
device claims to support [len=262144] [max=65536]

Cc: stable@vger.kernel.org
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7258a4cc-da16-5c34-a042-2a23ee396d56@redhat.com

  - Synchronize job submission with reset/recovery using reset_lock
  - Always print recovery reason and call diagnose_failure()
  - Don't allow for autosupend during recovery
  - Prevent immediate autosuspend after reset/recovery
  - Prevent force_recovery for issuing TDR when device is suspended
  - Reset VPU instead triggering recovery after changing debugfs params

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-4-jacek.lawrynowicz@linux.intel.com

- Wake up the device as late as possible
- Remove job reference counting in order to simplify the code
- Don't put jobs that are not fully submitted on submitted_jobs_xa in
  order to avoid potential races with reset/recovery

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-3-jacek.lawrynowicz@linux.intel.com

  - Add context_list_lock to synchronize user context addition/removal
  - Use drm_dev_enter() to prevent unbinding the device during ivpu_open()
    and vpu address allocation

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240122120945.1150728-2-jacek.lawrynowicz@linux.intel.com

This reverts commit 60aebc95.

Commit 60aebc95

 ("drivers/firmware: Move sysfb_init() from
device_initcall to subsys_initcall_sync") messes up initialization order
of the graphics drivers and leads to blank displays on some systems. So
revert the commit.

To make the display drivers fully independent from initialization
order requires to track framebuffer memory by device and independently
from the loaded drivers. The kernel currently lacks the infrastructure
to do so.

Reported-by: Jaak Ristioja <jaak@ristioja.ee>
Closes: https://lore.kernel.org/dri-devel/ZUnNi3q3yB3zZfTl@P70.localdomain/T/#t


Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Closes: https://lore.kernel.org/dri-devel/20231108024613.2898921-1-chenhuacai@loongson.cn/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10133


Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org # v6.5+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123120937.27736-1-tzimmermann@suse.de

Stephen Rothwell reported htmldocs warnings when merging drm-intel
tree:

Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5484: ERROR: Unexpected indentation.
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5488: WARNING: Block quote ends without a blank line; unexpected unindent.

Separate @failing_port return value list by surrounding it with a
blank line to fix above warnings.

Fixes: 1cd0a5ea

 ("drm/dp_mst: Factor out a helper to check the atomic state of a topology manager")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231114141715.6f435118@canb.auug.org.au/


Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114081033.27343-1-bagasdotme@gmail.com


Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Similar to commit 26db46bc ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.

Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().

Fixes: 3203e497 ("drm/bridge: anx7625: Synchronously run runtime suspend.")
Fixes: adca62ec

 ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118015916.2296741-1-hsinyi@chromium.org

IP reset has to followed by ivpu_pll_disable() to properly enter
reset state.

Fixes: 828d6304

 ("accel/ivpu: Don't enter d0i3 during FLR")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024165353.761507-1-stanislaw.gruszka@linux.intel.com

DRM_IVPU_PARAM_CONTEXT_PRIORITY has been deprecated because it
has been replaced with DRM_IVPU_JOB_PRIORITY levels set with
submit IOCTL and was unused anyway.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-10-jacek.lawrynowicz@linux.intel.com

Make debug logs more readable and consistent:
  - don't print handle as it is not always available for all buffers
  - use hashed ivpu_bo ptr as main buffer identifier
  - remove unused fields from ivpu_bo_print_info()

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-9-jacek.lawrynowicz@linux.intel.com

This was not supported properly. A buffer was imported to another VPU
context as a separate buffer object with duplicated sgt.
Both exported and imported buffers could be DMA mapped causing a double
mapping on the same device.

Buffers imported from another VPU context will now just increase
reference count, leaving only a single sgt, fixing the problem above.
Buffers still can't be shared among VPU contexts because each has its
own MMU mapping and ivpu_bo only supports single MMU mappings.

The solution would be to use a mapping list as in panfrost or etnaviv
drivers and it will be implemented in future if required.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-8-jacek.lawrynowicz@linux.intel.com

Call dma_unmap() on all buffers before the VPU is unbinded to avoid
"device driver has pending DMA allocations while released from device"
warning when DMA-API debug is enabled.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-7-jacek.lawrynowicz@linux.intel.com

drm_gem_shmem_vmap/vunmap requires dma resv lock to be held.
This was missed during conversion to shmem helper.

Fixes: 8d88e4cd

 ("accel/ivpu: Use GEM shmem helper for all buffers")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-6-jacek.lawrynowicz@linux.intel.com

Make boot/suspend failure debugging easier by dumping FW logs and error
registers.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-5-jacek.lawrynowicz@linux.intel.com

It is common need to be able to see IOVA/physical to VPU addresses
mappings. Especially when debugging different kind of memory related
issues. Lack of such logs forces user to modify and recompile KMD manually.

This commit adds those logs under MMU debug mask which can be turned on
dynamically with module param during KMD load.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-4-jacek.lawrynowicz@linux.intel.com

Check for possible failure reasons in the buttress.
Some errors (like external abort) should have corresponding buttress errors
registers set indicating the real reason of failure.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-3-jacek.lawrynowicz@linux.intel.com

Add ivpu_mmu_evtq_dump() function that dumps existing MMU events from
MMU event queue. Call this function if VPU boot failed.

Previously MMU events were only checked in interrupt handler, but if VPU
failed to boot due to MMU faults, those faults were missed because of
interrupts not yet being enabled. This will allow checking potential
fault reason of VPU not booting.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-2-jacek.lawrynowicz@linux.intel.com

Let's kickstart the 6.8 fix cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>