Current nf_flow_is_outdated() implementation considers any flow table flow
which state diverged from its underlying CT connection status for teardown
which can be problematic in the following cases:

- Flow has never been offloaded to hardware in the first place either
because flow table has hardware offload disabled (flag
NF_FLOWTABLE_HW_OFFLOAD is not set) or because it is still pending on 'add'
workqueue to be offloaded for the first time. The former is incorrect, the
later generates excessive deletions and additions of flows.

- Flow is already pending to be updated on the workqueue. Tearing down such
flows will also generate excessive removals from the flow table, especially
on highly loaded system where the latency to re-offload a flow via 'add'
workqueue can be quite high.

When considering a flow for teardown as outdated verify that it is both
offloaded to hardware and doesn't have any pending updates.

Fixes: 41f2c7c3

 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Since 41f2c7c3 ("net/sched: act_ct: Fix promotion of offloaded
unreplied tuple"), flowtable GC pushes back flows with IPS_SEEN_REPLY
back to classic path in every run, ie. every second. This is because of
a new check for NF_FLOW_HW_ESTABLISHED which is specific of sched/act_ct.

In Netfilter's flowtable case, NF_FLOW_HW_ESTABLISHED never gets set on
and IPS_SEEN_REPLY is unreliable since users decide when to offload the
flow before, such bit might be set on at a later stage.

Fix it by adding a custom .gc handler that sched/act_ct can use to
deal with its NF_FLOW_HW_ESTABLISHED bit.

Fixes: 41f2c7c3

 ("net/sched: act_ct: Fix promotion of offloaded unreplied tuple")
Reported-by: Vladimir Smelhaus <vl.sm@email.cz>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This commit fix wrong RTO timeout when received SACK reneging.

When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging()
will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.

But since the commit 62d9f1a6 ("tcp: fix TLP timer not set when
CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer()
is moved after tcp_fastretrans_alert()(which do the SACK reneging check),
so the RTO timeout will be overwrited by tcp_set_xmit_timer() with
icsk_rto instead of 1/2*srtt.

Here is a packetdrill script to check this bug:
0     socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0    bind(3, ..., ...) = 0
+0    listen(3, 1) = 0

// simulate srtt to 100ms
+0    < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7>
+0    > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
+.1    < . 1:1(0) ack 1 win 1024

+0    accept(3, ..., ...) = 4

+0    write(4, ..., 10000) = 10000
+0    > P. 1:10001(10000) ack 1

// inject sack
+.1    < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop>
+0    > . 1:1001(1000) ack 1

// inject sack reneging
+.1    < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>

// we expect rto fired in 1/2*srtt (50ms)
+.05    > . 1001:2001(1000) ack 1

This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when
tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid
being overwrited later.

Fixes: 62d9f1a6

 ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN")
Signed-off-by: Fred Chen <fred.chenchen03@gmail.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Douglas Anderson says:

====================
r8152: Avoid writing garbage to the adapter's registers

This series is the result of a cooperative debug effort between
Realtek and the ChromeOS team. On ChromeOS, we've noticed that Realtek
Ethernet adapters can sometimes get so wedged that even a reboot of
the host can't get them to enumerate again, assuming that the adapter
was on a powered hub and din't lose power when the host rebooted. This
is sometimes seen in the ChromeOS automated testing lab. The only way
to recover adapters in this state is to manually power cycle them.

I managed to reproduce one instance of this wedging (unknown if this
is truly related to what the test lab sees) by doing this:
1. Start a flood ping from a host to the device.
2. Drop the device into kdb.
3. Wait 90 seconds.
4. Resume from kdb (the "g" command).
5. Wait another 45 seconds.

Upon analysis, Realtek realized this was happening:

1. The Linux driver was getting a "Tx timeout" after resuming from kdb
   and then trying to reset itself.
2. As part of the reset, the Linux driver was attempting to do a
   read-modify-write of the adapter's registers.
3. The read would fail (due to a timeout) and the driver pretended
   that the register contained all 0xFFs. See commit f53a7ad1


   ("r8152: Set memory to all 0xFFs on failed reg reads")
4. The driver would take this value of all 0xFFs, modify it, and
   attempt to write it back to the adapter.
5. By this time the USB channel seemed to recover and thus we'd
   successfully write a value that was mostly 0xFFs to the adpater.
6. The adapter didn't like this and would wedge itself.

Another Engineer also managed to reproduce wedging of the Realtek
Ethernet adpater during a reboot test on an AMD Chromebook. In that
case he was sometimes seeing -EPIPE returned from the control
transfers.

This patch series fixes both issues.

Changes in v5:
- ("Run the unload routine if we have errors during probe") new for v5.
- ("Cancel hw_phy_work if we have an error in probe") new for v5.
- ("Release firmware if we have an error in probe") new for v5.
- Removed extra mutex_unlock() left over in v4.
- Fixed minor typos.
- Don't do queue an unbind/bind reset if probe fails; just retry probe.

Changes in v4:
- Took out some unnecessary locks/unlocks of the control mutex.
- Added comment about reading version causing probe fail if 3 fails.
- Added text to commit msg about the potential unbind/bind loop.

Changes in v3:
- Fixed v2 changelog ending up in the commit message.
- farmework -> framework in comments.

Changes in v2:
- ("Check for unplug in rtl_phy_patch_request()") new for v2.
- ("Check for unplug in r8153b_ups_en() / r8153c_ups_en()") new for v2.
- ("Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") new for v2.
- Reset patch no longer based on retry patch, since that was dropped.
- Reset patch should be robust even if failures happen in probe.
- Switched booleans to bits in the "flags" variable.
- Check for -ENODEV instead of "udev->state == USB_STATE_NOTATTACHED"
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Even though the functions to read/write registers can fail, most of
the places in the r8152 driver that read/write register values don't
check error codes. The lack of error code checking is problematic in
at least two ways.

The first problem is that the r8152 driver often uses code patterns
similar to this:
  x = read_register()
  x = x | SOME_BIT;
  write_register(x);

...with the above pattern, if the read_register() fails and returns
garbage then we'll end up trying to write modified garbage back to the
Realtek adapter. If the write_register() succeeds that's bad. Note
that as of commit f53a7ad1

 ("r8152: Set memory to all 0xFFs on
failed reg reads") the "garbage" returned by read_register() will at
least be consistent garbage, but it is still garbage.

It turns out that this problem is very serious. Writing garbage to
some of the hardware registers on the Ethernet adapter can put the
adapter in such a bad state that it needs to be power cycled (fully
unplugged and plugged in again) before it can enumerate again.

The second problem is that the r8152 driver generally has functions
that are long sequences of register writes. Assuming everything will
be OK if a random register write fails in the middle isn't a great
assumption.

One might wonder if the above two problems are real. You could ask if
we would really have a successful write after a failed read. It turns
out that the answer appears to be "yes, this can happen". In fact,
we've seen at least two distinct failure modes where this happens.

On a sc7180-trogdor Chromebook if you drop into kdb for a while and
then resume, you can see:
1. We get a "Tx timeout"
2. The "Tx timeout" queues up a USB reset.
3. In rtl8152_pre_reset() we try to reinit the hardware.
4. The first several (2-9) register accesses fail with a timeout, then
   things recover.

The above test case was actually fixed by the patch ("r8152: Increase
USB control msg timeout to 5000ms as per spec") but at least shows
that we really can see successful calls after failed ones.

On a different (AMD) based Chromebook with a particular adapter, we
found that during reboot tests we'd also sometimes get a transitory
failure. In this case we saw -EPIPE being returned sometimes. Retrying
worked, but retrying is not always safe for all register accesses
since reading/writing some registers might have side effects (like
registers that clear on read).

Let's fully lock out all register access if a register access fails.
When we do this, we'll try to queue up a USB reset and try to unlock
register access after the reset. This is slightly tricker than it
sounds since the r8152 driver has an optimized reset sequence that
only works reliably after probe happens. In order to handle this, we
avoid the optimized reset if probe didn't finish. Instead, we simply
retry the probe routine in this case.

When locking out access, we'll use the existing infrastructure that
the driver was using when it detected we were unplugged. This keeps us
from getting stuck in delay loops in some parts of the driver.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever the RTL8152_UNPLUG is set that just tells the driver that all
accesses will fail and we should just immediately bail. A future patch
will use this same concept at a time when the driver hasn't actually
been unplugged but is about to be reset. Rename the flag in
preparation for the future patch.

This is a no-op change and just a search and replace.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error handling in rtl8152_probe() is missing a call to release
firmware. Add it in to match what's in the cleanup code in
rtl8152_disconnect().

Fixes: 9370f2d0

 ("r8152: support request_firmware for RTL8153")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error handling in rtl8152_probe() is missing a call to cancel the
hw_phy_work. Add it in to match what's in the cleanup code in
rtl8152_disconnect().

Fixes: a028a9e0

 ("r8152: move the settings of PHY to a work queue")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rtl8152_probe() function lacks a call to the chip-specific
unload() routine when it sees an error in probe. Add it in to match
the cleanup code in rtl8152_disconnect().

Fixes: ac718b69

 ("net/usb: new driver for RTL8152")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the comment next to USB_CTRL_GET_TIMEOUT and
USB_CTRL_SET_TIMEOUT, although sending/receiving control messages is
usually quite fast, the spec allows them to take up to 5 seconds.
Let's increase the timeout in the Realtek driver from 500ms to 5000ms
(using the #defines) to account for this.

This is not just a theoretical change. The need for the longer timeout
was seen in testing. Specifically, if you drop a sc7180-trogdor based
Chromebook into the kdb debugger and then "go" again after sitting in
the debugger for a while, the next USB control message takes a long
time. Out of ~40 tests the slowest USB control message was 4.5
seconds.

While dropping into kdb is not exactly an end-user scenario, the above
is similar to what could happen due to an temporary interrupt storm,
what could happen if there was a host controller (HW or SW) issue, or
what could happen if the Realtek device got into a confused state and
needed time to recover.

This change is fairly critical since the r8152 driver in Linux doesn't
expect register reads/writes (which are backed by USB control
messages) to fail.

Fixes: ac718b69

 ("net/usb: new driver for RTL8152")
Suggested-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot reported the following uninit-value access issue [1]:

smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x00000030: -32
smsc95xx 1-1:0.0 (unnamed net_device) (uninitialized): Error reading E2P_CMD
=====================================================
BUG: KMSAN: uninit-value in smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
 smsc95xx_reset+0x409/0x25f0 drivers/net/usb/smsc95xx.c:896
 smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131
 usbnet_probe+0x100b/0x4060 drivers/net/usb/usbnet.c:1750
 usb_probe_interface+0xc75/0x1210 drivers/usb/core/driver.c:396
 really_probe+0x506/0xf40 drivers/base/dd.c:658
 __driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
 driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
 __device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
 bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
 __device_attach+0x3bd/0x640 drivers/base/dd.c:1030
 device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
 bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
 device_add+0x16ae/0x1f20 drivers/base/core.c:3622
 usb_set_configuration+0x31c9/0x38c0 drivers/usb/core/message.c:2207
 usb_generic_driver_probe+0x109/0x2a0 drivers/usb/core/generic.c:238
 usb_probe_device+0x290/0x4a0 drivers/usb/core/driver.c:293
 really_probe+0x506/0xf40 drivers/base/dd.c:658
 __driver_probe_device+0x2a7/0x5d0 drivers/base/dd.c:800
 driver_probe_device+0x72/0x7b0 drivers/base/dd.c:830
 __device_attach_driver+0x55a/0x8f0 drivers/base/dd.c:958
 bus_for_each_drv+0x3ff/0x620 drivers/base/bus.c:457
 __device_attach+0x3bd/0x640 drivers/base/dd.c:1030
 device_initial_probe+0x32/0x40 drivers/base/dd.c:1079
 bus_probe_device+0x3d8/0x5a0 drivers/base/bus.c:532
 device_add+0x16ae/0x1f20 drivers/base/core.c:3622
 usb_new_device+0x15f6/0x22f0 drivers/usb/core/hub.c:2589
 hub_port_connect drivers/usb/core/hub.c:5440 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5580 [inline]
 port_event drivers/usb/core/hub.c:5740 [inline]
 hub_event+0x53bc/0x7290 drivers/usb/core/hub.c:5822
 process_one_work kernel/workqueue.c:2630 [inline]
 process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2703
 worker_thread+0xf45/0x1490 kernel/workqueue.c:2784
 kthread+0x3e8/0x540 kernel/kthread.c:388
 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Local variable buf.i225 created at:
 smsc95xx_read_reg drivers/net/usb/smsc95xx.c:90 [inline]
 smsc95xx_reset+0x203/0x25f0 drivers/net/usb/smsc95xx.c:892
 smsc95xx_bind+0x9bc/0x22e0 drivers/net/usb/smsc95xx.c:1131

CPU: 1 PID: 773 Comm: kworker/1:2 Not tainted 6.6.0-rc1-syzkaller-00125-ge42bebf6db29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Workqueue: usb_hub_wq hub_event
=====================================================

Similar to e9c65989 ("net: usb: smsc75xx: Fix uninit-value access in
__smsc75xx_read_reg"), this issue is caused because usbnet_read_cmd() reads
less bytes than requested (zero byte in the reproducer). In this case,
'buf' is not properly filled.

This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads
less bytes than requested.

sysbot reported similar uninit-value access issue [2]. The root cause is
the same as mentioned above, and this patch addresses it as well.

Fixes: 2f7ca802

 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Reported-and-tested-by:  <syzbot+c74c24b43c9ae534f0e0@syzkaller.appspotmail.com>
Reported-and-tested-by:  <syzbot+2c97a98a5ba9ea9c23bd@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=c74c24b43c9ae534f0e0 [1]
Closes: https://syzkaller.appspot.com/bug?extid=2c97a98a5ba9ea9c23bd

 [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

t4_set_params_timeout() can return -EINVAL if failed, add check
for this.

Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

strncat() usage in adf7242_debugfs_init() is wrong.
The size given to strncat() is the maximum number of bytes that can be
written, excluding the trailing NULL.

Here, the size that is passed, DNAME_INLINE_LEN, does not take into account
the size of "adf7242-" that is already in the array.

In order to fix it, use snprintf() instead.

Fixes: 7302b9d9

 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The spi_transfer struct has to have all it's fields initialized to 0 in
this case, since not all of them are set before starting the transfer.
Otherwise, spi_sync_transfer() will sometimes return an error.

Fixes: a526a3cc

 ("net: ethernet: adi: adin1110: Fix SPI transfers")
Signed-off-by: Dell Jin <dell.jin.code@outlook.com>
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Upon boot up, the driver will configure the MAC capabilities based on
the maximum number of tx and rx queues. When the user changes the
tx queues to single queue, the MAC should be capable of supporting Half
Duplex, but the driver does not update the MAC capabilities when it is
configured so.

Using the stmmac_reinit_queues() to check the number of tx queues
and set the MAC capabilities accordingly.

Fixes: 0366f7e0

 ("net: stmmac: add ethtool support for get/set channels")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Gan, Yi Fang <yi.fang.gan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b0377116 ("net: ethernet: Use device_get_match_data()") dropped
the unconditional use of xgene_enet_of_match resulting in this warning:

drivers/net/ethernet/apm/xgene/xgene_enet_main.c:2004:34: warning: unused variable 'xgene_enet_of_match' [-Wunused-const-variable]

The fix is to drop of_match_ptr() which is not necessary because DT is
always used for this driver (well, it could in theory support ACPI only,
but CONFIG_OF is always enabled for arm64).

Fixes: b0377116

 ("net: ethernet: Use device_get_match_data()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310170627.2Kvf6ZHY-lkp@intel.com/


Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a programming status desc is encountered on the rx_ring,
next_to_process is bumped along with cleaned_count but next_to_clean is
not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in
overwriting whole ring with new buffers.

Update next_to_clean to point to next_to_process on seeing a programming
status desc if not in the middle of handling a multi-frag packet. Also,
bump cleaned_count only for such case as otherwise next_to_clean buffer
may be returned to hardware on reaching clean_threshold.

Fixes: e9031f2d

 ("i40e: introduce next_to_process to i40e_ring")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reported-by:  <hq.dev+kernel@msdfc.xyz>
Reported by: Solomon Peachy <pizza@shaftnet.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678


Tested-by:  <hq.dev+kernel@msdfc.xyz>
Tested by: Indrek Järve <incx@dustbite.net>
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20231019203852.3663665-1-jacob.e.keller@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to
advertise 2500M speed support and TP (twisted pair) properly. Convert to
'ethtool_link_ksettings_test_link_mode' to advertise supported speed and
eliminate ambiguity.

Fixes: 8c5ad0da

 ("igc: Add ethtool support")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231019203641.3661960-1-jacob.e.keller@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval
   can be written from sysfs.

2) tbl->last_flush is read locklessly from neigh_alloc()

3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()

4) neightbl_fill_info() reads cpu stats that can be changed concurrently.

Fixes: c7fb64db

 ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Under memory stress conditions, tcp_sendmsg_locked()
might call sk_stream_wait_memory(), thus releasing the socket lock.

If a fresh skb has been allocated prior to this,
we should not leave it in the write queue otherwise
tcp_write_xmit() could panic.

This apparently does not happen often, but a future change
in __sk_mem_raise_allocated() that Shakeel and others are
considering would increase chances of being hurt.

Under discussion is to remove this controversial part:

    /* Fail only if socket is _under_ its sndbuf.
     * In this case we cannot block, so that we have to fail.
     */
    if (sk->sk_wmem_queued + size >= sk->sk_sndbuf) {
        /* Force charge with __GFP_NOFAIL */
        if (memcg_charge && !charged) {
            mem_cgroup_charge_skmem(sk->sk_memcg, amt,
                gfp_memcg_charge() | __GFP_NOFAIL);
        }
        return 1;
    }

Fixes: fdfc5c85

 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20231019112457.1190114-1-edumazet@google.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add check for return of igb_update_ethtool_nfc_entry so that in case
of any potential errors the memory alocated for input will be freed.

Fixes: 0e71def2

 ("igb: add support of RX network flow classification")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

reques -> request

Fixes: 09dde54c

 ("PS3: gelic: Add wireless support for PS3")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit c87c938f ("i40e: Add VF VLAN pruning") added new
PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with
existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag.

Move the affected flag at the end of the flags and fix its value.

Reproducer:
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off
[ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled)
netlink error: Operation not supported
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off
[root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off

The link-down-on-close flag cannot be modified after setting vf-vlan-pruning
because vf-vlan-pruning shares the same bit with total-port-shutdown flag
that prevents any modification of link-down-on-close flag.

Fixes: c87c938f

 ("i40e: Add VF VLAN pruning")
Cc: Mateusz Palczewski <mateusz.palczewski@intel.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not safe to initialize the waitqueues after queueing the
watchdog_task. It will be using them.

The chance of this causing a real problem is very small, because
there will be some sleeping before any of the waitqueues get used.
I got a crash only after inserting an artificial sleep in iavf_probe.

Queue the watchdog_task as the last step in iavf_probe. Add a comment to
prevent repeating the mistake.

Fixes: fe2647ab

 ("i40evf: prevent VF close returning before state transitions to DOWN")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KCSAN reported the following data-race bug:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169

race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0x80003fff -> 0x3402805f

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

drivers/net/ethernet/realtek/r8169_main.c:
==========================================
   4429
 → 4430                 status = le32_to_cpu(desc->opts1);
   4431                 if (status & DescOwn)
   4432                         break;
   4433
   4434                 /* This barrier is needed to keep us from reading
   4435                  * any other fields out of the Rx descriptor until
   4436                  * we know the status of DescOwn
   4437                  */
   4438                 dma_rmb();
   4439
   4440                 if (unlikely(status & RxRES)) {
   4441                         if (net_ratelimit())
   4442                                 netdev_warn(dev, "Rx ERROR. status = %08x\n",

Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:

   4429
 → 4430                 status = le32_to_cpu(READ_ONCE(desc->opts1));
   4431                 if (status & DescOwn)
   4432                         break;
   4433

As the consequence of this fix, this KCSAN warning was eliminated.

Fixes: 6202806e

 ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/


Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KCSAN reported the following data-race:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169

race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0xb0000042 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

The read side is in

drivers/net/ethernet/realtek/r8169_main.c
=========================================
   4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
   4356                    int budget)
   4357 {
   4358         unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
   4359         struct sk_buff *skb;
   4360
   4361         dirty_tx = tp->dirty_tx;
   4362
   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {
   4364                 unsigned int entry = dirty_tx % NUM_TX_DESC;
   4365                 u32 status;
   4366
 → 4367                 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
   4368                 if (status & DescOwn)
   4369                         break;
   4370
   4371                 skb = tp->tx_skb[entry].skb;
   4372                 rtl8169_unmap_tx_skb(tp, entry);
   4373
   4374                 if (skb) {
   4375                         pkts_compl++;
   4376                         bytes_compl += skb->len;
   4377                         napi_consume_skb(skb, budget);
   4378                 }
   4379                 dirty_tx++;
   4380         }
   4381
   4382         if (tp->dirty_tx != dirty_tx) {
   4383                 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
   4384                 WRITE_ONCE(tp->dirty_tx, dirty_tx);
   4385
   4386                 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
   4387                                               rtl_tx_slots_avail(tp),
   4388                                               R8169_TX_START_THRS);
   4389                 /*
   4390                  * 8168 hack: TxPoll requests are lost when the Tx packets are
   4391                  * too close. Let's kick an extra TxPoll request when a burst
   4392                  * of start_xmit activity is detected (if it is not detected,
   4393                  * it is slow enough). -- FR
   4394                  * If skb is NULL then we come here again once a tx irq is
   4395                  * triggered after the last fragment is marked transmitted.
   4396                  */
   4397                 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);
   4399         }
   4400 }

tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes
this KCSAN warning.

   4366
 → 4367                 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
   4368                 if (status & DescOwn)
   4369                         break;
   4370

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/


Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: David S. Miller <davem@davemloft.net>

KCSAN reported the following data-race:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]

write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0x002f4815 -> 0x002f4816

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
   4251         /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
   4252         smp_wmb();
   4253
 → 4254         WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
   4255
   4256         stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
   4257                                                 R8169_TX_STOP_THRS,
   4258                                                 R8169_TX_START_THRS);

The read side is the function rtl_tx():

   4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
   4356                    int budget)
   4357 {
   4358         unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
   4359         struct sk_buff *skb;
   4360
   4361         dirty_tx = tp->dirty_tx;
   4362
   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {
   4364                 unsigned int entry = dirty_tx % NUM_TX_DESC;
   4365                 u32 status;
   4366
   4367                 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
   4368                 if (status & DescOwn)
   4369                         break;
   4370
   4371                 skb = tp->tx_skb[entry].skb;
   4372                 rtl8169_unmap_tx_skb(tp, entry);
   4373
   4374                 if (skb) {
   4375                         pkts_compl++;
   4376                         bytes_compl += skb->len;
   4377                         napi_consume_skb(skb, budget);
   4378                 }
   4379                 dirty_tx++;
   4380         }
   4381
   4382         if (tp->dirty_tx != dirty_tx) {
   4383                 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
   4384                 WRITE_ONCE(tp->dirty_tx, dirty_tx);
   4385
   4386                 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
   4387                                               rtl_tx_slots_avail(tp),
   4388                                               R8169_TX_START_THRS);
   4389                 /*
   4390                  * 8168 hack: TxPoll requests are lost when the Tx packets are
   4391                  * too close. Let's kick an extra TxPoll request when a burst
   4392                  * of start_xmit activity is detected (if it is not detected,
   4393                  * it is slow enough). -- FR
   4394                  * If skb is NULL then we come here again once a tx irq is
   4395                  * triggered after the last fragment is marked transmitted.
   4396                  */
 → 4397                 if (tp->cur_tx != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);
   4399         }
   4400 }

Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:

   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {

but the same solution is required for protecting the other access to tp->cur_tx:

 → 4397                 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);

The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.

The fix eliminated the KCSAN data-race report for this bug.

It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.

Fixes: 94d8a98e ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/


Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cited commit introduced a neat way of updating next_to_clean that does
not require boundary checks on each increment. This was done by masking
the new value with (ring length - 1) mask. Problem is that this is
applicable only for power of 2 ring sizes, for every other size this
assumption can not be made. In turn, it leads to cleaning descriptors
out of order as well as splats:

[ 1388.411915] Workqueue: events xp_release_deferred
[ 1388.411919] RIP: 0010:xp_free+0x1a/0x50
[ 1388.411921] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 8b 57 70 48 8d 47 70 48 89 e5 48 39 d0 74 06 <5d> c3 cc cc cc cc 48 8b 57 60 83 82 b8 00 00 00 01 48 8b 57 60 48
[ 1388.411922] RSP: 0018:ffa0000000a83cb0 EFLAGS: 00000206
[ 1388.411923] RAX: ff11000119aa5030 RBX: 000000000000001d RCX: ff110001129b6e50
[ 1388.411924] RDX: ff11000119aa4fa0 RSI: 0000000055555554 RDI: ff11000119aa4fc0
[ 1388.411925] RBP: ffa0000000a83cb0 R08: 0000000000000000 R09: 0000000000000000
[ 1388.411926] R10: 0000000000000001 R11: 0000000000000000 R12: ff11000115829b80
[ 1388.411927] R13: 000000000000005f R14: 0000000000000000 R15: ff11000119aa4fc0
[ 1388.411928] FS:  0000000000000000(0000) GS:ff11000277e00000(0000) knlGS:0000000000000000
[ 1388.411929] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1388.411930] CR2: 00007f1f564e6c14 CR3: 000000000783c005 CR4: 0000000000771ef0
[ 1388.411931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1388.411931] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1388.411932] PKRU: 55555554
[ 1388.411933] Call Trace:
[ 1388.411934]  <IRQ>
[ 1388.411935]  ? show_regs+0x6e/0x80
[ 1388.411937]  ? watchdog_timer_fn+0x1d2/0x240
[ 1388.411939]  ? __pfx_watchdog_timer_fn+0x10/0x10
[ 1388.411941]  ? __hrtimer_run_queues+0x10e/0x290
[ 1388.411945]  ? clockevents_program_event+0xae/0x130
[ 1388.411947]  ? hrtimer_interrupt+0x105/0x240
[ 1388.411949]  ? __sysvec_apic_timer_interrupt+0x54/0x150
[ 1388.411952]  ? sysvec_apic_timer_interrupt+0x7f/0x90
[ 1388.411955]  </IRQ>
[ 1388.411955]  <TASK>
[ 1388.411956]  ? asm_sysvec_apic_timer_interrupt+0x1f/0x30
[ 1388.411958]  ? xp_free+0x1a/0x50
[ 1388.411960]  i40e_xsk_clean_rx_ring+0x5d/0x100 [i40e]
[ 1388.411968]  i40e_clean_rx_ring+0x14c/0x170 [i40e]
[ 1388.411977]  i40e_queue_pair_disable+0xda/0x260 [i40e]
[ 1388.411986]  i40e_xsk_pool_setup+0x192/0x1d0 [i40e]
[ 1388.411993]  i40e_reconfig_rss_queues+0x1f0/0x1450 [i40e]
[ 1388.412002]  xp_disable_drv_zc+0x73/0xf0
[ 1388.412004]  ? mutex_lock+0x17/0x50
[ 1388.412007]  xp_release_deferred+0x2b/0xc0
[ 1388.412010]  process_one_work+0x178/0x350
[ 1388.412011]  ? __pfx_worker_thread+0x10/0x10
[ 1388.412012]  worker_thread+0x2f7/0x420
[ 1388.412014]  ? __pfx_worker_thread+0x10/0x10
[ 1388.412015]  kthread+0xf8/0x130
[ 1388.412017]  ? __pfx_kthread+0x10/0x10
[ 1388.412019]  ret_from_fork+0x3d/0x60
[ 1388.412021]  ? __pfx_kthread+0x10/0x10
[ 1388.412023]  ret_from_fork_asm+0x1b/0x30
[ 1388.412026]  </TASK>

It comes from picking wrong ring entries when cleaning xsk buffers
during pool detach.

Remove the count_mask logic and use they boundary check when updating
next_to_process (which used to be a next_to_clean).

Fixes: c8a8ca34

 ("i40e: remove unnecessary memory writes of the next to clean pointer")
Reported-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Tested-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231018163908.40841-1-maciej.fijalkowski@intel.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, netfilter, WiFi.

  Feels like an up-tick in regression fixes, mostly for older releases.
  The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
  fairly clear-cut user reported regressions. The mlx5 DMA bug was
  causing strife for 390x folks. The fixes themselves are not
  particularly scary, tho. No open investigations / outstanding reports
  at the time of writing.

  Current release - regressions:

   - eth: mlx5: perform DMA operations in the right locations, make
     devices usable on s390x, again

   - sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
     curve, previous fix of rejecting invalid config broke some scripts

   - rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock

   - revert "ethtool: Fix mod state of verbose no_mask bitset", needs
     more work

  Current release - new code bugs:

   - tcp: fix listen() warning with v4-mapped-v6 address

  Previous releases - regressions:

   - tcp: allow tcp_disconnect() again when threads are waiting, it was
     denied to plug a constant source of bugs but turns out .NET depends
     on it

   - eth: mlx5: fix double-free if buffer refill fails under OOM

   - revert "net: wwan: iosm: enable runtime pm support for 7560", it's
     causing regressions and the WWAN team at Intel disappeared

   - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
     single skb, fix single-stream perf regression on some devices

  Previous releases - always broken:

   - Bluetooth:
      - fix issues in legacy BR/EDR PIN code pairing
      - correctly bounds check and pad HCI_MON_NEW_INDEX name

   - netfilter:
      - more fixes / follow ups for the large "commit protocol" rework,
        which went in as a fix to 6.5
      - fix null-derefs on netlink attrs which user may not pass in

   - tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
     Debian for keeping HZ=250 alive)

   - net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
     letting frankenstein UDP super-frames from getting into the stack

   - net: fix interface altnames when ifc moves to a new namespace

   - eth: qed: fix the size of the RX buffers

   - mptcp: avoid sending RST when closing the initial subflow"

* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
  Revert "ethtool: Fix mod state of verbose no_mask bitset"
  selftests: mptcp: join: no RST when rm subflow/addr
  mptcp: avoid sending RST when closing the initial subflow
  mptcp: more conservative check for zero probes
  tcp: check mptcp-level constraints for backlog coalescing
  selftests: mptcp: join: correctly check for no RST
  net: ti: icssg-prueth: Fix r30 CMDs bitmasks
  selftests: net: add very basic test for netdev names and namespaces
  net: move altnames together with the netdevice
  net: avoid UAF on deleted altname
  net: check for altname conflicts when changing netdev's netns
  net: fix ifname in netlink ntf during netns move
  net: ethernet: ti: Fix mixed module-builtin object
  net: phy: bcm7xxx: Add missing 16nm EPHY statistics
  ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
  tcp_bpf: properly release resources on error paths
  net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
  net: mdio-mux: fix C45 access returning -EIO after API change
  tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
  octeon_ep: update BQL sent bytes before ringing doorbell
  ...

Merge tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai ChenL
 "Fix 4-level pagetable building, disable WUC for pgprot_writecombine()
  like ioremap_wc(), use correct annotation for exception handlers, and
  a trivial cleanup"

* tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()
  LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
  LoongArch: Export symbol invalid_pud_table for modules building
  LoongArch: Use SYM_CODE_* to annotate exception handlers

Pull slab fix from Vlastimil Babka:

 - stable fix to prevent kernel warnings with KASAN_HW_TAGS on arm64
   due to improperly resolved kmalloc alignment restrictions (Catalin
   Marinas)

* tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign()

Pull seccomp fix from Kees Cook:

 - Fix seccomp_unotify perf benchmark for 32-bit (Jiri Slaby)

* tag 'seccomp-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  perf/benchmark: fix seccomp_unotify benchmark for 32-bit

Pull vfs fix from Christian Brauner:
 "An openat() call from io_uring triggering an audit call can apparently
  cause the refcount of struct filename to be incremented from multiple
  threads concurrently during async execution, triggering a refcount
  underflow and hitting a BUG_ON(). That bug has been lurking around
  since at least v5.16 apparently.

  Switch to an atomic counter to fix that. The underflow check is
  downgraded from a BUG_ON() to a WARN_ON_ONCE() but we could easily
  remove that check altogether tbh"

* tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  audit,io_uring: io_uring openat triggers audit reference count underflow

This reverts commit 108a36d0.

It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
        Supports Wake-on: pg
        Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
        Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
        Wake-on: pg
...

This worked correctly before this commit because we were always updating
a zero bitmap (since commit 66991703

 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.

Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d0

 ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ntfs3 fixes from Konstantin Komarov:

 - memory leak

 - some logic errors, NULL dereferences

 - some code was refactored

 - more sanity checks

* tag 'ntfs3_for_6.6' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Avoid possible memory leak
  fs/ntfs3: Fix directory element type detection
  fs/ntfs3: Fix possible null-pointer dereference in hdr_find_e()
  fs/ntfs3: Fix OOB read in ntfs_init_from_boot
  fs/ntfs3: fix panic about slab-out-of-bounds caused by ntfs_list_ea()
  fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
  fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
  fs/ntfs3: Do not allow to change label if volume is read-only
  fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
  fs/ntfs3: Refactoring and comments
  fs/ntfs3: Fix alternative boot searching
  fs/ntfs3: Allow repeated call to ntfs3_put_sbi
  fs/ntfs3: Use inode_set_ctime_to_ts instead of inode_set_ctime
  fs/ntfs3: Fix shift-out-of-bounds in ntfs_fill_super
  fs/ntfs3: fix deadlock in mark_as_free_ex
  fs/ntfs3: Add more attributes checks in mi_enum_attr()
  fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
  fs/ntfs3: Write immediately updated ntfs state
  fs/ntfs3: Add ckeck in ni_update_parent()

Mat Martineau says:

====================
mptcp: Fixes for v6.6

Patch 1 corrects the logic for MP_JOIN tests where 0 RSTs are expected.

Patch 2 ensures MPTCP packets are not incorrectly coalesced in the TCP
backlog queue.

Patch 3 avoids a zero-window probe and associated WARN_ON_ONCE() in an
expected MPTCP reinjection scenario.

Patches 4 & 5 allow an initial MPTCP subflow to be closed cleanly
instead of always sending RST. Associated selftest is updated.
====================

Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-0-17ecb002e41d@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.

This patch makes sure RST are not sent when removing any subflows or any
addresses.

Fixes: c2b2ae39

 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When closing the first subflow, the MPTCP protocol unconditionally
calls tcp_disconnect(), which in turn generates a reset if the subflow
is established.

That is unexpected and different from what MPTCP does with MPJ
subflows, where resets are generated only on FASTCLOSE and other edge
scenarios.

We can't reuse for the first subflow the same code in place for MPJ
subflows, as MPTCP clean them up completely via a tcp_close() call,
while must keep the first subflow socket alive for later re-usage, due
to implementation constraints.

This patch adds a new helper __mptcp_subflow_disconnect() that
encapsulates, a logic similar to tcp_close, issuing a reset only when
the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown
otherwise.

Fixes: c2b2ae39

 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.org


Signed-off-by: Jakub Kicinski <kuba@kernel.org>