Pull sparc fixes from David Miller:
 "Some more sparc fixups, mostly aimed at getting the allmodconfig build
  up and clean again"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Rework xchg() definition to avoid warnings.
  sparc64: Export __node_distance.
  sparc64: Make corrupted user stacks more debuggable.

Such as:

fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

and

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers reference it via node_distance(), for example the
NVME host driver core.

ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1

Signed-off-by: David S. Miller <davem@davemloft.net>

Right now if we get a corrupted user stack frame we do a
do_exit(SIGILL) which is not helpful.

If under a debugger, this behavior causes the inferior process to
exit.  So the register and other state cannot be examined at the time
of the event.

Instead, conditionally log a rate limited kernel log message and then
force a SIGSEGV.

With bits and ideas borrowed (as usual) from powerpc.

Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS updates from Paul Burton:

 - kexec support for the generic MIPS platform when running on a CPU
   including the MIPS Coherence Manager & related hardware.

 - Improvements to the definition of memory barriers used around MMIO
   accesses, and fixes in their use.

 - Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping
   reliance on the old bootmem code.

 - A number of fixes & improvements for Loongson 3 systems.

 - DT & config updates for the Microsemi Ocelot platform.

 - Workaround to enable USB power on the Netgear WNDR3400v3.

 - Various cleanups & fixes.

* tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits)
  MIPS: Cleanup DSP ASE detection
  MIPS: dts: Change upper case to lower case
  MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
  MIPS: Loongson-3: Fix BRIDGE irq delivery problem
  MIPS: Loongson-3: Fix CPU UART irq delivery problem
  MIPS: Remove unused PREF, PREFE & PREFX macros
  MIPS: lib: Use kernel_pref & user_pref in memcpy()
  MIPS: Remove unused CAT macro
  MIPS: Add kernel_pref & user_pref helpers
  MIPS: Remove unused TTABLE macro
  MIPS: Remove unused PIC macros
  MIPS: Remove unused MOVN & MOVZ macros
  MIPS: Provide actually relaxed MMIO accessors
  MIPS: Enforce strong ordering for MMIO accessors
  MIPS: Correct `mmiowb' barrier for `wbflush' platforms
  MIPS: Define MMIO ordering barriers
  MIPS: mscc: add PCB120 to the ocelot fitImage
  MIPS: mscc: add DT for Ocelot PCB120
  MIPS: memset: Limit excessive `noreorder' assembly mode use
  MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
  ...

Pull MIPS fixes from Paul Burton:
 "A couple of MIPS fixes that should have ideally made it for v4.19, but
  hey-ho here they are now:

   - A fix for potential poor stack placement introduced in v4.19-rc8.

   - A fix for a warning introduced in use of TURBOchannel devices by
     DMA changes in v4.16"

* tag 'mips_fixes_4.20_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: VDSO: Reduce VDSO_RANDOMIZE_SIZE to 64MB for 64bit
  TC: Set DMA masks for devices

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - A large series to rewrite our SLB miss handling, replacing a lot of
     fairly complicated asm with much fewer lines of C.

   - Following on from that, we now maintain a cache of SLB entries for
     each process and preload them on context switch. Leading to a 27%
     speedup for our context switch benchmark on Power9.

   - Improvements to our handling of SLB multi-hit errors. We now print
     more debug information when they occur, and try to continue running
     by flushing the SLB and reloading, rather than treating them as
     fatal.

   - Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).

   - Add support for physical memory up to 2PB in the linear mapping on
     64-bit Book3S. We only support up to 512TB as regular system
     memory, otherwise the percpu allocator runs out of vmalloc space.

   - Add stack protector support for 32 and 64-bit, with a per-task
     canary.

   - Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.

   - Support recognising "big cores" on Power9, where two SMT4 cores are
     presented to us as a single SMT8 core.

   - A large series to cleanup some of our ioremap handling and PTE
     flags.

   - Add a driver for the PAPR SCM (storage class memory) interface,
     allowing guests to operate on SCM devices (acked by Dan).

   - Changes to our ftrace code to handle very large kernels, where we
     need to use a trampoline to get to ftrace_caller().

  And many other smaller enhancements and cleanups.

  Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
  Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
  Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
  Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
  R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
  Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
  Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
  Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
  O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
  Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
  Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
  Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"

* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
  Revert "selftests/powerpc: Fix out-of-tree build errors"
  powerpc/msi: Fix compile error on mpc83xx
  powerpc: Fix stack protector crashes on CPU hotplug
  powerpc/traps: restore recoverability of machine_check interrupts
  powerpc/64/module: REL32 relocation range check
  powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
  selftests/powerpc: Add a test of wild bctr
  powerpc/mm: Fix page table dump to work on Radix
  powerpc/mm/radix: Display if mappings are exec or not
  powerpc/mm/radix: Simplify split mapping logic
  powerpc/mm/radix: Remove the retry in the split mapping logic
  powerpc/mm/radix: Fix small page at boundary when splitting
  powerpc/mm/radix: Fix overuse of small pages in splitting logic
  powerpc/mm/radix: Fix off-by-one in split mapping logic
  powerpc/ftrace: Handle large kernel configs
  powerpc/mm: Fix WARN_ON with THP NUMA migration
  selftests/powerpc: Fix out-of-tree build errors
  powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
  powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
  powerpc/time: isolate scaled cputime accounting in dedicated functions.
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fix the NFSv4.1 r/wsize sanity checking
   - Reset the RPC/RDMA credit grant properly after a disconnect
   - Fix a missed page unlock after pg_doio()

  Features and optimisations:
   - Overhaul of the RPC client socket code to eliminate a locking
     bottleneck and reduce the latency when transmitting lots of
     requests in parallel.
   - Allow parallelisation of the RPCSEC_GSS encoding of an RPC request.
   - Convert the RPC client socket receive code to use iovec_iter() for
     improved efficiency.
   - Convert several NFS and RPC lookup operations to use RCU instead of
     taking global locks.
   - Avoid the need for BH-safe locks in the RPC/RDMA back channel.

  Bugfixes and cleanups:
   - Fix lock recovery during NFSv4 delegation recalls
   - Fix the NFSv4 + NFSv4.1 "lookup revalidate + open file" case.
   - Fixes for the RPC connection metrics
   - Various RPC client layer cleanups to consolidate stream based
     sockets
   - RPC/RDMA connection cleanups
   - Simplify the RPC/RDMA cleanup after memory operation failures
   - Clean ups for NFS v4.2 copy completion and NFSv4 open state
     reclaim"

* tag 'nfs-for-4.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (97 commits)
  SUNRPC: Convert the auth cred cache to use refcount_t
  SUNRPC: Convert auth creds to use refcount_t
  SUNRPC: Simplify lookup code
  SUNRPC: Clean up the AUTH cache code
  NFS: change sign of nfs_fh length
  sunrpc: safely reallow resvport min/max inversion
  nfs: remove redundant call to nfs_context_set_write_error()
  nfs: Fix a missed page unlock after pg_doio()
  SUNRPC: Fix a compile warning for cmpxchg64()
  NFSv4.x: fix lock recovery during delegation recall
  SUNRPC: use cmpxchg64() in gss_seq_send64_fetch_and_inc()
  xprtrdma: Squelch a sparse warning
  xprtrdma: Clean up xprt_rdma_disconnect_inject
  xprtrdma: Add documenting comments
  xprtrdma: Report when there were zero posted Receives
  xprtrdma: Move rb_flags initialization
  xprtrdma: Don't disable BH's in backchannel server
  xprtrdma: Remove memory address of "ep" from an error message
  xprtrdma: Rename rpcrdma_qp_async_error_upcall
  xprtrdma: Simplify RPC wake-ups on connect
  ...

Pull cifs updates from Steve French:
 "Three smb3 fixes for stable, patches for improved debugging and perf
  gathering, and much improved performance for most metadata operations
  (expanded use of compounding)"

* tag '4.20-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
  cifs: update internal module version number for cifs.ko to 2.14
  smb3: add debug for unexpected mid cancellation
  cifs: allow calling SMB2_xxx_free(NULL)
  smb3 - clean up debug output displaying network interfaces
  smb3: show number of current open files in /proc/fs/cifs/Stats
  cifs: add support for ioctl on directories
  cifs: fallback to older infolevels on findfirst queryinfo retry
  smb3: do not attempt cifs operation in smb3 query info error path
  smb3: send backup intent on compounded query info
  cifs: track writepages in vfs operation counters
  smb2: fix uninitialized variable bug in smb2_ioctl_query_info
  cifs: add IOCTL for QUERY_INFO passthrough to userspace
  cifs: minor clarification in comments
  CIFS: Print message when attempting a mount
  CIFS: Adds information-level logging function
  cifs: OFD locks do not conflict with eachothers
  CIFS: SMBD: Do not call ib_dereg_mr on invalidated memory registration
  CIFS: pass page offsets on SMB1 read/write
  fs/cifs: fix uninitialised variable warnings
  smb3: add tracepoint for sending lease break responses to server
  ...

Pull md updates from Shaohua Li:
 "This mainly improves raid10 cluster and fixes some bugs:

   - raid10 cluster improvements from Guoqing

   - Memory leak fixes from Jack and Xiao

   - raid10 hang fix from Alex

   - raid5 block faulty device fix from Mariusz

   - metadata update fix from Neil

   - Invalid disk role fix from Me

   - Other clearnups"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  MD: Memory leak when flush bio size is zero
  md: fix memleak for mempool
  md-cluster: remove suspend_info
  md-cluster: send BITMAP_NEEDS_SYNC message if reshaping is interrupted
  md-cluster/bitmap: don't call md_bitmap_sync_with_cluster during reshaping stage
  md-cluster/raid10: don't call remove_and_add_spares during reshaping stage
  md-cluster/raid10: call update_size in md_reap_sync_thread
  md-cluster: introduce resync_info_get interface for sanity check
  md-cluster/raid10: support add disk under grow mode
  md-cluster/raid10: resize all the bitmaps before start reshape
  MD: fix invalid stored role for a disk - try2
  md/bitmap: use mddev_suspend/resume instead of ->quiesce()
  md: remove redundant code that is no longer reachable
  md: allow metadata updates while suspending an array - fix
  MD: fix invalid stored role for a disk
  md/raid10: Fix raid10 replace hang when new added disk faulty
  raid5: block failing device if raid will be failed

Merge tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - The biggest change this cycle is to remove support for the legacy IO
   path (.request_fn) from request-based DM.

   Jens has already started preparing for complete removal of the legacy
   IO path in 4.21 but this earlier removal of support from DM has been
   coordinated with Jens (as evidenced by the commit being attributed to
   him).

   Making request-based DM exclussively blk-mq only cleans up that
   portion of DM core quite nicely.

 - Convert the thinp and zoned targets over to using refcount_t where
   applicable.

 - A couple fixes to the DM zoned target for refcounting and other races
   buried in the implementation of metadata block creation and use.

 - Small cleanups to remove redundant unlikely() around a couple
   WARN_ON_ONCE().

 - Simplify how dm-ioctl copies from userspace, eliminating some
   potential for a malicious user trying to change the executed ioctl
   after its processing has begun.

 - Tweaked DM crypt target to use the DM device name when naming the
   various workqueues created for a particular DM crypt device (makes
   the N workqueues for a DM crypt device more easily understood and
   enhances user's accounting capabilities at a glance via "ps")

 - Small fixup to remove dead branch in DM writecache's memory_entry().

* tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm writecache: remove disabled code in memory_entry()
  dm zoned: fix various dmz_get_mblock() issues
  dm zoned: fix metadata block ref counting
  dm raid: avoid bitmap with raid4/5/6 journal device
  dm crypt: make workqueue names device-specific
  dm: add dm_table_device_name()
  dm ioctl: harden copy_params()'s copy_from_user() from malicious users
  dm: remove unnecessary unlikely() around WARN_ON_ONCE()
  dm zoned: target: use refcount_t for dm zoned reference counters
  dm thin: use refcount_t for thin_c reference counting
  dm table: require that request-based DM be layered on blk-mq devices
  dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASED
  dm: remove legacy request-based IO path

Pull more block layer updates from Jens Axboe:

 - Set of patches improving support for zoned devices. This was ready
   before the merge window, but I was late in picking it up and hence it
   missed the original pull request (Damien, Christoph)

 - libata no link power management quirk addition for a Samsung drive
   (Diego Viola)

 - Fix for a performance regression in BFQ that went into this merge
   window (Federico Motta)

 - Fix for a missing dma mask setting return value check (Gustavo)

 - Typo in the gdrom queue failure case (me)

 - NULL pointer deref fix for xen-blkfront (Vasilis Liaskovitis)

 - Fixing the get_rq trace point placement in blk-mq (Xiaoguang Wang)

 - Removal of a set-but-not-read variable in cdrom (zhong jiang)

* tag 'for-linus-20181026' of git://git.kernel.dk/linux-block:
  libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9
  block, bfq: fix asymmetric scenarios detection
  gdrom: fix mistake in assignment of error
  blk-mq: place trace_block_getrq() in correct place
  block: Introduce blk_revalidate_disk_zones()
  block: add a report_zones method
  block: Expose queue nr_zones in sysfs
  block: Improve zone reset execution
  block: Introduce BLKGETNRZONES ioctl
  block: Introduce BLKGETZONESZ ioctl
  block: Limit allocation of zone descriptors for report zones
  block: Introduce blkdev_nr_zones() helper
  scsi: sd_zbc: Fix sd_zbc_check_zones() error checks
  scsi: sd_zbc: Reduce boot device scan and revalidate time
  scsi: sd_zbc: Rearrange code
  cdrom: remove set but not used variable 'tocuse'
  skd: fix unchecked return values
  xen/blkfront: avoid NULL blkfront_info dereference on device removal

Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb...

Pull thermal SoC updates from Eduardo Valentin:
 "Several new things coming up. Specifics:

   - Rework of tsens and hisi thermal drivers

   - OF-thermal now allows sharing multiple cooling devices on maps

   - Added support for r8a7744 and R8A77970 on rcar thermal driver

   - Added support for r8a774a1 on rcar_gen3 thermal driver

   - New thermal driver stm32

   - Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada,
     qcom-spmi, rcar, da9062/61"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits)
  thermal: da9062/61: Prevent hardware access during system suspend
  thermal: rcar_thermal: Prevent doing work after unbind
  thermal: rcar_thermal: Prevent hardware access during system suspend
  thermal: rcar_gen3_thermal: add R8A77980 support
  dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
  thermal: add stm32 thermal driver
  dt-bindings: stm32-thermal: add binding documentation
  thermal: rcar_thermal: add R8A77970 support
  dt-bindings: thermal: rcar-thermal: document R8A77970 bindings
  thermal: rcar_thermal: fix duplicate IRQ request
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  thermal/drivers/hisi: Add the dual clusters sensors for hi3660
  thermal/drivers/hisi: Add more sensors channel
  thermal/drivers/hisi: Remove pointless irq field
  thermal/drivers/hisi: Use platform_get_irq_byname
  thermal/drivers/hisi: Replace macro name with relevant sensor location
  thermal/drivers/hisi: Add multiple sensors support
  thermal/drivers/hisi: Prepare to support multiple sensors
  thermal/drivers/hisi: Factor out the probe functions
  thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer
  ...

Pull more dma-mapping updates from Christoph Hellwig:

 - various swiotlb cleanups

 - do not dip into the ѕwiotlb pool for dma coherent allocations

 - add support for not cache coherent DMA to swiotlb

 - switch ARM64 to use the generic swiotlb_dma_ops

* tag 'dma-mapping-4.20-1' of git://git.infradead.org/users/hch/dma-mapping:
  arm64: use the generic swiotlb_dma_ops
  swiotlb: add support for non-coherent DMA
  swiotlb: don't dip into swiotlb pool for coherent allocations
  swiotlb: refactor swiotlb_map_page
  swiotlb: use swiotlb_map_page in swiotlb_map_sg_attrs
  swiotlb: merge swiotlb_unmap_page and unmap_single
  swiotlb: remove the overflow buffer
  swiotlb: do not panic on mapping failures
  swiotlb: mark is_swiotlb_buffer static
  swiotlb: remove a pointless comment

Pull IOMMU updates from Joerg Roedel:

 - Debugfs support for the Intel VT-d driver.

   When enabled, it now also exposes some of its internal data
   structures to user-space for debugging purposes.

 - ARM-SMMU driver now uses the generic deferred flushing and fast-path
   iova allocation code.

   This is expected to be a major performance improvement, as this
   allocation path scales a lot better.

 - Support for r8a7744 in the Renesas iommu driver

 - Couple of minor fixes and improvements all over the place

* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
  iommu/arm-smmu-v3: Remove unnecessary wrapper function
  iommu/arm-smmu-v3: Add SPDX header
  iommu/amd: Add default branch in amd_iommu_capable()
  dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
  iommu/amd: Move iommu_init_pci() to .init section
  iommu/arm-smmu: Support non-strict mode
  iommu/io-pgtable-arm-v7s: Add support for non-strict mode
  iommu/arm-smmu-v3: Add support for non-strict mode
  iommu/io-pgtable-arm: Add support for non-strict mode
  iommu: Add "iommu.strict" command line option
  iommu/dma: Add support for non-strict mode
  iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
  iommu/arm-smmu-v3: Implement flush_iotlb_all hook
  iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
  iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
  iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
  iommu/arm-smmu-v3: Fix a couple of minor comment typos
  iommu: Fix a typo
  iommu: Remove .domain_{get,set}_windows
  iommu: Tidy up window attributes
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc patches for 4.20-rc1.

  Loads of things here, we have new code in all of these driver
  subsystems:
   - fpga
   - stm
   - extcon
   - nvmem
   - eeprom
   - hyper-v
   - gsmi
   - coresight
   - thunderbolt
   - vmw_balloon
   - goldfish
   - soundwire
  along with lots of fixes and minor changes to other small drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (245 commits)
  Documentation/security-bugs: Clarify treatment of embargoed information
  lib: Fix ia64 bootloader linkage
  MAINTAINERS: Clarify UIO vs UIOVEC maintainer
  docs/uio: fix a grammar nitpick
  docs: fpga: document programming fpgas using regions
  fpga: add devm_fpga_region_create
  fpga: bridge: add devm_fpga_bridge_create
  fpga: mgr: add devm_fpga_mgr_create
  hv_balloon: Replace spin_is_locked() with lockdep
  sgi-xp: Replace spin_is_locked() with lockdep
  eeprom: New ee1004 driver for DDR4 memory
  eeprom: at25: remove unneeded 'at25_remove'
  w1: IAD Register is yet readable trough iad sys file. Fix snprintf (%u for unsigned, count for max size).
  misc: mic: scif: remove set but not used variables 'src_dma_addr, dst_dma_addr'
  misc: mic: fix a DMA pool free failure
  platform: goldfish: pipe: Add a blank line to separate varibles and code
  platform: goldfish: pipe: Remove redundant casting
  platform: goldfish: pipe: Call misc_deregister if init fails
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_dev variable into the driver state
  platform: goldfish: pipe: Move the file-scope goldfish_pipe_miscdev variable into the driver state
  ...

Merge tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small number of driver core patches for 4.20-rc1.

  Not much happened here this merge window, only a very tiny number of
  patches that do:

   - add BUS_ATTR_WO() for use by drivers

   - component error path fixes

   - kernfs range check fix

   - other tiny error path fixes and const changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'driver-core-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  devres: provide devm_kstrdup_const()
  mm: move is_kernel_rodata() to asm-generic/sections.h
  devres: constify p in devm_kfree()
  driver core: add BUS_ATTR_WO() macro
  kernfs: Fix range checks in kernfs_get_target_path
  component: fix loop condition to call unbind() if bind() fails
  drivers/base/devtmpfs.c: don't pretend path is const in delete_path
  kernfs: update comment about kernfs_path() return value

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...

Pull rdma updates from Jason Gunthorpe:
 "This has been a smaller cycle with many of the commits being smallish
  code fixes and improvements across the drivers.

   - Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and
     rxe

   - Memory window support in hns

   - mlx5 user API 'flow mutate/steering' allows accessing the full
     packet mangling and matching machinery from user space

   - Support inter-working with verbs API calls in the 'devx' mlx5 user
     API, and provide options to use devx with less privilege

   - Modernize the use of syfs and the device interface to use attribute
     groups and cdev properly for uverbs, and clean up some of the core
     code's device list management

   - More progress on net namespaces for RDMA devices

   - Consolidate driver BAR mmapping support into core code helpers and
     rework how RDMA holds poitners to mm_struct for get_user_pages
     cases

   - First pass to use 'dev_name' instead of ib_device->name

   - Device renaming for RDMA devices"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits)
  IB/mlx5: Add support for extended atomic operations
  RDMA/core: Fix comment for hw stats init for port == 0
  RDMA/core: Refactor ib_register_device() function
  RDMA/core: Fix unwinding flow in case of error to register device
  ib_srp: Remove WARN_ON in srp_terminate_io()
  IB/mlx5: Allow scatter to CQE without global signaled WRs
  IB/mlx5: Verify that driver supports user flags
  IB/mlx5: Support scatter to CQE for DC transport type
  RDMA/drivers: Use core provided API for registering device attributes
  RDMA/core: Allow existing drivers to set one sysfs group per device
  IB/rxe: Remove unnecessary enum values
  RDMA/umad: Use kernel API to allocate umad indexes
  RDMA/uverbs: Use kernel API to allocate uverbs indexes
  RDMA/core: Increase total number of RDMA ports across all devices
  IB/mlx4: Add port and TID to MAD debug print
  IB/mlx4: Enable debug print of SMPs
  RDMA/core: Rename ports_parent to ports_kobj
  RDMA/core: Do not expose unsupported counters
  IB/mlx4: Refer to the device kobject instead of ports_parent
  RDMA/nldev: Allow IB device rename through RDMA netlink
  ...

med_power_with_dipm causes my T450 to freeze with a SAMSUNG
MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).

Switching the LPM to max_performance fixes this issue.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Files in include/dt-bindings/ may be useful to any OS that uses DT, when
building the OS binary itself, not just when building DTB files. Since
some OSs are not GPL, they need non-GPL headers. This change relicenses
two of the useful files so that they can be used under the MIT license
when desired. I wrote these files and NVIDIA legal has approved this
change. Geert also ack'd the change; he fixed some spelling issues in the
comments.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>

This reverts commit d8a2fe29.

That commit, by me, fixed the out of tree build errors by causing some
of the tests not to build at all.

Pull sparc fix from David Miller:
 "Build regression fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix VDSO build with older binutils.

Merge tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This patch set contains a lot (at least, for me) of improvements to
  the RISC-V kernel port:

   - The removal of some cacheinfo values that were bogus.

   - On systems with F but without D the kernel will not show the F
     extension to userspace, as it isn't actually supported.

   - Support for futexes.

   - Removal of some unused code.

   - Cleanup of some menuconfig entries.

   - Support for systems without a floating-point unit, and for building
     kernels that will never use the floating-point unit.

   - More fixes to the RV32I port, which regressed again. It's really
     time to get this into a regression test somewhere so I stop
     breaking it. Thanks to Zong for resurrecting it again!

   - Various fixes that resulted from a year old review of our original
     patch set that I finally got around to.

   - Various improvements to SMP support, largely based around having
     switched to logical hart numbering, as well as some interrupt
     improvements. This one is in the same patch set as above, thanks to
     Atish for sheparding everything though as my patch set was a bit of
     a mess.

  I'm pretty sure this is our largest patch set since the original
  kernel contribution, and it's certainly the one with the most
  contributors. While I don't have anything else I know I'm going to
  submit for the merge window, I would be somewhat surprised if I didn't
  screw anything up.

  Thanks for the help, everyone!"

* tag 'riscv-for-linus-4.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  RISC-V: Cosmetic menuconfig changes
  riscv: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
  RISC-V: remove the unused return_to_handler export
  RISC-V: Add futex support.
  RISC-V: Add FP register ptrace support for gdb.
  RISC-V: Mask out the F extension on systems without D
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  RISC-V: Show IPI stats
  RISC-V: Show CPU ID and Hart ID separately in /proc/cpuinfo
  RISC-V: Use Linux logical CPU number instead of hartid
  RISC-V: Add logical CPU indexing for RISC-V
  RISC-V: Use WRITE_ONCE instead of direct access
  RISC-V: Use mmgrab()
  RISC-V: Rename im_okay_therefore_i_am to found_boot_cpu
  RISC-V: Rename riscv_of_processor_hart to riscv_of_processor_hartid
  RISC-V: Provide a cleaner raw_smp_processor_id()
  RISC-V: Disable preemption before enabling interrupts
  RISC-V: Comment on the TLB flush in smp_callin()
  RISC-V: Filter ISA and MMU values in cpuinfo
  RISC-V: Don't set cacheinfo.{physical_line_partition,attributes}
  ...

Pull KVM updates from Radim Krčmář:
 "ARM:
   - Improved guest IPA space support (32 to 52 bits)

   - RAS event delivery for 32bit

   - PMU fixes

   - Guest entry hardening

   - Various cleanups

   - Port of dirty_log_test selftest

  PPC:
   - Nested HV KVM support for radix guests on POWER9. The performance
     is much better than with PR KVM. Migration and arbitrary level of
     nesting is supported.

   - Disable nested HV-KVM on early POWER9 chips that need a particular
     hardware bug workaround

   - One VM per core mode to prevent potential data leaks

   - PCI pass-through optimization

   - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base

  s390:
   - Initial version of AP crypto virtualization via vfio-mdev

   - Improvement for vfio-ap

   - Set the host program identifier

   - Optimize page table locking

  x86:
   - Enable nested virtualization by default

   - Implement Hyper-V IPI hypercalls

   - Improve #PF and #DB handling

   - Allow guests to use Enlightened VMCS

   - Add migration selftests for VMCS and Enlightened VMCS

   - Allow coalesced PIO accesses

   - Add an option to perform nested VMCS host state consistency check
     through hardware

   - Automatic tuning of lapic_timer_advance_ns

   - Many fixes, minor improvements, and cleanups"

* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
  Revert "kvm: x86: optimize dr6 restore"
  KVM: PPC: Optimize clearing TCEs for sparse tables
  x86/kvm/nVMX: tweak shadow fields
  selftests/kvm: add missing executables to .gitignore
  KVM: arm64: Safety check PSTATE when entering guest and handle IL
  KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
  arm/arm64: KVM: Enable 32 bits kvm vcpu events support
  arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
  KVM: arm64: Fix caching of host MDCR_EL2 value
  KVM: VMX: enable nested virtualization by default
  KVM/x86: Use 32bit xor to clear registers in svm.c
  kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
  kvm: vmx: Defer setting of DR6 until #DB delivery
  kvm: x86: Defer setting of CR2 until #PF delivery
  kvm: x86: Add payload operands to kvm_multiple_exception
  kvm: x86: Add exception payload fields to kvm_vcpu_events
  kvm: x86: Add has_payload and payload to kvm_queued_exception
  KVM: Documentation: Fix omission in struct kvm_vcpu_events
  KVM: selftests: add Enlightened VMCS test
  ...

Pull cgroup updates from Tejun Heo:
 "All trivial changes - simplification, typo fix and adding
  cond_resched() in a netclassid update loop"

* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup, netclassid: add a preemption point to write_classid
  rdmacg: fix a typo in rdmacg documentation
  cgroup: Simplify cgroup_ancestor

Pull printk updates from Petr Mladek:

 - Fix two more locations where printf formatting leaked pointers

 - Better log_buf_len parameter handling

 - Add prefix to messages from printk code

 - Do not miss messages on other consoles when the log is replayed on a
   new one

 - Reduce race between console registration and panic() when the log
   might get replayed on all consoles

 - Some cont buffer code clean up

 - Call console only when there is something to do (log vs cont buffer)

* tag 'printk-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Hash printed address for netdev bits fallback
  lib/vsprintf: Hash legacy clock addresses
  lib/vsprintf: Prepare for more general use of ptr_to_id()
  lib/vsprintf: Make ptr argument conts in ptr_to_id()
  printk: fix integer overflow in setup_log_buf()
  printk: do not preliminary split up cont buffer
  printk: lock/unlock console only for new logbuf entries
  printk: keep kernel cont support always enabled
  printk: Give error on attempt to set log buffer length to over 2G
  printk: Add KBUILD_MODNAME and remove a redundant print prefix
  printk: Correct wrong casting
  printk: Fix panic caused by passing log_buf_len to command line
  printk: CON_PRINTBUFFER console registration is a bit racy
  printk: Do not miss new messages when replaying the log

Pull crypto updates from Herbert Xu:
 "API:
   - Remove VLA usage
   - Add cryptostat user-space interface
   - Add notifier for new crypto algorithms

  Algorithms:
   - Add OFB mode
   - Remove speck

  Drivers:
   - Remove x86/sha*-mb as they are buggy
   - Remove pcbc(aes) from x86/aesni
   - Improve performance of arm/ghash-ce by up to 85%
   - Implement CTS-CBC in arm64/aes-blk, faster by up to 50%
   - Remove PMULL based arm64/crc32 driver
   - Use PMULL in arm64/crct10dif
   - Add aes-ctr support in s5p-sss
   - Add caam/qi2 driver

  Others:
   - Pick better transform if one becomes available in crc-t10dif"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
  crypto: chelsio - Update ntx queue received from cxgb4
  crypto: ccree - avoid implicit enum conversion
  crypto: caam - add SPDX license identifier to all files
  crypto: caam/qi - simplify CGR allocation, freeing
  crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
  crypto: arm64/aes-blk - ensure XTS mask is always loaded
  crypto: testmgr - fix sizeof() on COMP_BUF_SIZE
  crypto: chtls - remove set but not used variable 'csk'
  crypto: axis - fix platform_no_drv_owner.cocci warnings
  crypto: x86/aes-ni - fix build error following fpu template removal
  crypto: arm64/aes - fix handling sub-block CTS-CBC inputs
  crypto: caam/qi2 - avoid double export
  crypto: mxs-dcp - Fix AES issues
  crypto: mxs-dcp - Fix SHA null hashes and output length
  crypto: mxs-dcp - Implement sha import/export
  crypto: aegis/generic - fix for big endian systems
  crypto: morus/generic - fix for big endian systems
  crypto: lrw - fix rebase error after out of bounds fix
  crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.
  crypto: cavium/nitrox - NITROX command queue changes.
  ...

Pull LoadPin updates from James Morris:
 "From Kees: This is a small reporting improvement and the param change
  needed for the ordering series (but since the loadpin change is
  desired and separable, I'm putting it here)"

* 'next-loadpin' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  LoadPin: Rename boot param "enabled" to "enforce"
  LoadPin: Report friendly block device name

Pull smack updates from James Morris:
 "From Casey: three patches for Smack for 4.20. Two clean up warnings
  and one is a rarely encountered ptrace capability check"

* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: Mark expected switch fall-through
  Smack: ptrace capability use fixes
  Smack: remove set but not used variable 'root_inode'

Pull TPM updates from James Morris:
 "From Jarkko: The only new feature is non-blocking operation for
  /dev/tpm0"

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: Restore functionality to xen vtpm driver.
  tpm: add support for nonblocking operation
  tpm: add ptr to the tpm_space struct to file_priv
  tpm: Make SECURITYFS a weak dependency
  tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivated
  tpm: fix response size validation in tpm_get_random()

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity updates from James Morris:
 "From Mimi: This contains a couple of bug fixes, including one for a
  recent problem with calculating file hashes on overlayfs, and some
  code cleanup"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MAINTAINERS: add Jarkko as maintainer for trusted keys
  ima: open a new file instance if no read permissions
  ima: fix showing large 'violations' or 'runtime_measurements_count'
  security/integrity: remove unnecessary 'init_keyring' variable
  security/integrity: constify some read-only data
  vfs: require i_size <= SIZE_MAX in kernel_read_file()

Pull more ->lookup() cleanups from Al Viro:
 "Some ->lookup() instances are still overcomplicating the life
  for themselves, open-coding the stuff that would be handled by
  d_splice_alias() just fine.

  Simplify a couple of such cases caught this cycle and document
  d_splice_alias() intended use"

* 'work.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Document d_splice_alias() calling conventions for ->lookup() users.
  simplify btrfs_lookup()
  clean erofs_lookup()

Pull alpha syscall glue updates from Al Viro:
 "Two old patches making alpha syscall glue a bit less mysterious"

* 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: unify the glue for sigreturn-like syscalls
  alpha: use alpha_ni_syscall only for syscall zero

Pull compat_ioctl fixes from Al Viro:
 "A bunch of compat_ioctl fixes, mostly in bluetooth.

  Hopefully, most of fs/compat_ioctl.c will get killed off over the next
  few cycles; between this, tty series already merged and Arnd's work
  this cycle ought to take a good chunk out of the damn thing..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  hidp: fix compat_ioctl
  hidp: constify hidp_connection_add()
  cmtp: fix compat_ioctl
  bnep: fix compat_ioctl
  compat_ioctl: trim the pointless includes

Pull irq updates from Thomas Gleixner:
 "The interrupt brigade came up with the following updates:

   - Driver for the Marvell System Error Interrupt machinery

   - Overhaul of the GIC-V3 ITS driver

   - Small updates and fixes all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  genirq: Fix race on spurious interrupt detection
  softirq: Fix typo in __do_softirq() comments
  genirq: Fix grammar s/an /a /
  irqchip/gic: Unify GIC priority definitions
  irqchip/gic-v3: Remove acknowledge loop
  dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller
  dt-bindings/interrupt-controller: Update Marvell ICU bindings
  irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI)
  arm64: marvell: Enable SEI driver
  irqchip/irq-mvebu-sei: Add new driver for Marvell SEI
  irqchip/irq-mvebu-icu: Support ICU subnodes
  irqchip/irq-mvebu-icu: Disociate ICU and NSR
  irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts
  irqchip/irq-mvebu-icu: Fix wrong private data retrieval
  dt-bindings/interrupt-controller: Fix Marvell ICU length in the example
  genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
  dt-bindings: irqchip: renesas-irqc: Document r8a7744 support
  dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support
  irqchip/pdc: Setup all edge interrupts as rising edge at GIC
  irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
  ...

Pull timekeeping updates from Thomas Gleixner:
 "The timers and timekeeping departement provides:

   - Another large y2038 update with further preparations for providing
     the y2038 safe timespecs closer to the syscalls.

   - An overhaul of the SHCMT clocksource driver

   - SPDX license identifier updates

   - Small cleanups and fixes all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  tick/sched : Remove redundant cpu_online() check
  clocksource/drivers/dw_apb: Add reset control
  clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
  clocksource/drivers: Unify the names to timer-* format
  clocksource/drivers/sh_cmt: Add R-Car gen3 support
  dt-bindings: timer: renesas: cmt: document R-Car gen3 support
  clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
  clocksource/drivers/sh_cmt: Fix clocksource width for 32...

The workqueue used for monitoring the hardware may run while the device
is already suspended.  Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e ("thermal: Prevent polling from
happening during system suspend").

Fixes: 608567aa

 ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

When testing bind/unbind on r8a7791/koelsch:

    WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10

This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.

Fixes: e0a5172e

 ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>