- Aug 19, 2022
-
-
Thierry GUIBERT authored
Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by:
Thierry GUIBERT <thierry.guibert@croix-rouge.fr> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jing Leng authored
On page 362 of the USB3.2 specification ( https://usb.org/sites/default/files/usb_32_20210125.zip), The 'SuperSpeed Endpoint Companion Descriptor' shall only be returned by Enhanced SuperSpeed devices that are operating at Gen X speed. Each endpoint described in an interface is followed by a 'SuperSpeed Endpoint Companion Descriptor'. If users use SuperSpeed UDC, host can't recognize the device if endpoint doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed. Currently in the uac2 driver code: 1. ss_epout_desc_comp follows ss_epout_desc; 2. ss_epin_fback_desc_comp follows ss_epin_fback_desc; 3. ss_epin_desc_comp follows ss_epin_desc; 4. Only ss_ep_int_desc endpoint doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed, so we should add it. Fixes: eaf6cbe0 ("usb: gadget: f_uac2: add volume and mute support") Cc: stable <stable@kernel.org> Signed-off-by:
Jing Leng <jleng@ambarella.com> Signed-off-by:
Jack Pham <quic_jackp@quicinc.com> Link: https://lore.kernel.org/r/20220721014815.14453-1-quic_jackp@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chunfeng Yun authored
This happens when @udev->reset_resume is set to true, when usb resume, the flow as below: - hub_resume - usb_disable_interface - usb_disable_endpoint - usb_hcd_disable_endpoint - xhci_endpoint_disable // it set @ep->hcpriv to NULL Then when reset usb device, it will drop allocated endpoints, the flow as below: - usb_reset_and_verify_device - usb_hcd_alloc_bandwidth - xhci_mtk_drop_ep but @ep->hcpriv is already set to NULL, the bandwidth will be not released anymore. Due to the added endponts are stored in hash table, we can drop the check of @ep->hcpriv. Fixes: 4ce18666 ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable <stable@kernel.org> Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chunfeng Yun authored
Currently uses the worst case byte budgets on FS/LS bus bandwidth, for example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 5 uframes(188 * 5) while the actual FS bus budget should be just 192 bytes. It cause that many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured. To improve it, changes to use "approximate" best case budget for FS/LS bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819080556.32215-1-chunfeng.yun@mediatek.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Sun authored
Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6 ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by:
Pablo Sun <pablo.sun@mediatek.com> Co-developed-by:
Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by:
Guillaume Ranquet <granquet@baylibre.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Pablo Sun <pablo.sun@mediatek.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthias Kaehlcke authored
onboard_hub_power_off() currently has a delay after asserting the reset of the hub. There is already a delay in onboard_hub_power_on() before de-asserting the reset, which ensures that the reset is asserted for the required time, so the delay in _power_off() is not needed. Skip the reset GPIO check before calling gpiod_set_value_cansleep(), the function returns early when the GPIO descriptor is NULL. Reviewed-By:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220805111836.1.Id5a4dc0a2c046236116693aa55672295513a0f2a@changeid Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wesley Cheng authored
Relocate the pullups_connected check until after it is ensured that there are no runtime PM transitions. If another context triggered the DWC3 core's runtime resume, it may have already enabled the Run/Stop. Do not re-run the entire pullup sequence again, as it may issue a core soft reset while Run/Stop is already set. This patch depends on commit 69e131d1 ("usb: dwc3: gadget: Prevent repeat pullup()") Fixes: 77adb8bd ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <stable@kernel.org> Signed-off-by:
Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heikki Krogerus authored
This adds the necessary PCI device ID for the controller inside the Intel Raptor Lake CPU block. The controllers that are part of the PCH (chipset) have separate device IDs. Cc: stable@vger.kernel.org Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Utkarsh Patel authored
This adds the necessary ACPI ID for Intel Meteor Lake IOM devices. The callback function is_memory() is modified so that it also checks if the resource descriptor passed to it is a memory type "Address Space Resource Descriptor". On Intel Meteor Lake the ACPI memory resource is not described using the "32-bit Memory Range Descriptor" because the memory is outside of the 32-bit address space. The memory resource is described using the "Address Space Resource Descriptor" instead. Intel Meteor Lake is the first platform to describe the memory resource for this device with Address Space Resource Descriptor, but it most likely will not be the last. Therefore the change to the is_memory() callback function is made generic. Signed-off-by:
Utkarsh Patel <utkarsh.h.patel@intel.com> Cc: stable@vger.kernel.org [ heikki: Rewrote the commit message. ] Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Konrad Dybcio authored
Add a compatible for DWC3 found on SM6375. Signed-off-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220716193257.456023-4-konrad.dybcio@somainline.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Clean up the suspend callbacks by separating the error and success paths to improve readability. Also drop a related redundant initialisation. Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-10-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
It is the Qualcomm glue wakeup interrupts that may be able to wake the system from suspend and this can now be described in the devicetree. Move the wakeup-source property handling over from the core driver and instead propagate the capability setting to the core device during probe. This is needed as there is currently no way for the core driver to query the wakeup setting of the glue device, but it is the core driver that manages the PHY power state during suspend. Also don't leave the PHYs enabled when system wakeup has been disabled through sysfs. Fixes: 649f5c84 ("usb: dwc3: core: Host wake up support from system suspend") Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-9-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Add a wakeup-source property to the binding to describe whether the wakeup interrupts can wake the system from suspend. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-8-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
A recent commit implementing wakeup support in host mode instead broke suspend for peripheral and OTG mode. The hack that was added in the suspend path to determine the speed of any device connected to the USB2 bus not only accesses internal driver data for a child device, but also dereferences a NULL pointer or accesses freed data when the controller is not acting as host. There's no quick fix to the layering violation, but since reverting would leave us with broken suspend in host mode with wakeup triggering immediately, let's keep the hack for now. Fix the immediate issues by only checking the host bus speed and enabling wakeup interrupts when acting as host. Fixes: 6895ea55 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-7-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
A device must enable wakeups during runtime suspend regardless of whether it is capable and allowed to wake the system up from system suspend. Fixes: 2664deb0 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state") Tested-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-6-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
The Qualcomm dwc3 runtime-PM implementation checks the xhci platform-device pointer in the wakeup-interrupt handler to determine whether the controller is in host mode and if so triggers a resume. After a role switch in OTG mode the xhci platform-device would have been freed and the next wakeup from runtime suspend would access the freed memory. Note that role switching is executed from a freezable workqueue, which guarantees that the pointer is stable during suspend. Also note that runtime PM has been broken since commit 2664deb0 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state"), which incidentally also prevents this issue from being triggered. Fixes: a4333c3a ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-5-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
A recent change added a dependency to the USB host stack and broke gadget-only builds of the driver. Fixes: 6895ea55 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-4-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
This reverts commit d9be8d5c. Generic power-domain flags must be set before the power-domain is initialised and must specifically not be modified by drivers for devices that happen to be in the domain. To make sure that USB power-domains are left enabled during system suspend when a device in the domain is in the wakeup path, the GENPD_FLAG_ACTIVE_WAKEUP flag should instead be set for the domain unconditionally when it is registered. Note that this also avoids keeping power-domains on during suspend when wakeup has not been enabled (e.g. through sysfs). For the runtime PM case, making sure that the PHYs are not suspended and that they are in the same domain as the controller prevents the domain from being suspended. If there are cases where this is not possible or desirable, the genpd implementation may need to be extended. Fixes: d9be8d5c ("usb: dwc3: qcom: Keep power domain on to retain controller status") Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-3-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Generic PHYs must be powered-off before they can be tore down. Similarly, suspending legacy PHYs after having powered them off makes no sense. Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded dwc3_probe() error-path sequences that got this wrong. Note that this makes dwc3_core_exit() match the dwc3_core_init() error path with respect to powering off the PHYs. Fixes: 03c1fd62 ("usb: dwc3: core: add phy cleanup for probe error handling") Fixes: c499ff71 ("usb: dwc3: core: re-factor init and exit paths") Cc: stable@vger.kernel.org # 4.8 Reviewed-by:
Andrew Halaney <ahalaney@redhat.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Aug 18, 2022
-
-
Witold Lipieta authored
This is USB mass storage primary boot loader for code download on NXP PN7462AU. Without the quirk it is impossible to write whole memory at once as device restarts during the write due to bogus residue values reported. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by:
Witold Lipieta <witold.lipieta@thaumatec.com> Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Badhri Jagan Sridharan authored
When the port does not support USB PD, prevent transition to PD only states when power supply property is written. In this case, TCPM transitions to SNK_NEGOTIATE_CAPABILITIES which should not be the case given that the port is not pd_capable. [ 84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS] [ 84.308335] Setting usb_comm capable false [ 84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0 [ 84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS] Fixes: e9e6e164 ("usb: typec: tcpm: Support non-PD mode") Cc: stable@vger.kernel.org Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20220817215410.1807477-1-badhri@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because of an older issue with the depencency. It is not necessary to forbid NOP_USB_XCEIV=y in combination with USB_MUSB_HDRC=m, but only the reverse, which causes the link failure from the original Kconfig change. Use the correct dependency to still allow NOP_USB_XCEIV=n or NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m to fix the multi_v7_defconfig for tusb. Fixes: ab37a7a8 ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in") Fixes: c0442479 ("usb: musb: Fix randconfig build issues for Kconfig options") Cc: stable <stable@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220818135737.3143895-10-arnd@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Aug 15, 2022
-
-
Linus Torvalds authored
-
Yury Norov authored
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we have gfp_types.h for this. Fixes powerpc allmodconfig build: In file included from include/linux/nodemask.h:97, from include/linux/mmzone.h:17, from include/linux/gfp.h:7, from include/linux/radix-tree.h:12, from include/linux/idr.h:15, from include/linux/kernfs.h:12, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: include/linux/random.h: In function 'add_latent_entropy': >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in Reported-by:
kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Yury Norov <yury.norov@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs lseek fix from Al Viro: "Fix proc_reg_llseek() breakage. Always had been possible if somebody left NULL ->proc_lseek, became a practical issue now" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: take care to handle NULL ->proc_lseek()
-
Al Viro authored
Easily done now, just by clearing FMODE_LSEEK in ->f_mode during proc_reg_open() for such entries. Fixes: 868941b1 "fs: remove no_llseek" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: - 'perf c2c' now supports ARM64, adjust its output to cope with differences with what is in x86_64. Now go find false sharing on ARM64 (at least Neoverse) as well! - Refactor the JSON processing, making the output more compact and thus reducing the size of the resulting perf binary - Improvements for 'perf offcpu' profiling, including tracking child processes - Update Intel JSON metrics and events files for broadwellde, broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown, knightslanding, sapphirerapids, skylakex and snowridgex - Add 'perf stat' JSON output and a 'perf test' entry for it - Ignore memfd and anonymous mmap events if jitdump present - Refactor 'perf test' shell tests allowing subdirs - Fix an error handling path in 'parse_perf_probe_command()' - Fixes for the guest Intel PT tracing patchkit in the 1st batch of this merge window - Print debuginfod queries if -v option is used, to explain delays in processing when debuginfo servers are enabled to fetch DSOs with richer symbol tables - Improve error message for 'perf record -p not_existing_pid' - Fix openssl and libbpf feature detection - Add PMU pai_crypto event description for IBM z16 on 'perf list' - Fix typos and duplicated words on comments in various places * tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits) perf test: Refactor shell tests allowing subdirs perf vendor events: Update events for snowridgex perf vendor events: Update events and metrics for skylakex perf vendor events: Update metrics for sapphirerapids perf vendor events: Update events for knightslanding perf vendor events: Update metrics for jaketown perf vendor events: Update metrics for ivytown perf vendor events: Update events and metrics for icelakex perf vendor events: Update events and metrics for haswellx perf vendor events: Update events and metrics for cascadelakex perf vendor events: Update events and metrics for broadwellx perf vendor events: Update metrics for broadwellde perf jevents: Fold strings optimization perf jevents: Compress the pmu_events_table perf metrics: Copy entire pmu_event in find metric perf pmu-events: Hide the pmu_events perf pmu-events: Don't assume pmu_event is an array perf pmu-events: Move test events/metrics to JSON perf test: Use full metric resolution perf pmu-events: Hide pmu_events_map ...
-
- Aug 14, 2022
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit CPUs trap on it rather than ignoring it as they should. - Fix ftrace when building with clang, which was broken by some refactoring. - A couple of other minor fixes. Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool. * tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kexec: Fix build failure from uninitialised variable powerpc/ppc-opcode: Fix PPC_RAW_TW() powerpc64/ftrace: Fix ftrace for clang builds powerpc: Make eh value more explicit when using lwarx powerpc: Don't hide eh field of lwarx behind a macro powerpc: Fix eh field when calling lwarx on PPC32
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull /proc/mounts fix from Al Viro: "Fix for /proc/mounts escaping - escape the '#' character too" * tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: escape hash as well
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - two fixes for stable, one for a lock length miscalculation, and another fixes a lease break timeout bug - improvement to handle leases, allows the close timeout to be configured more safely - five restructuring/cleanup patches * tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Do not access tcon->cfids->cfid directly from is_path_accessible cifs: Add constructor/destructors for tcon->cfid SMB3: fix lease break timeout when multiple deferred close handles for the same file. smb3: allow deferred close timeout to be configurable cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir cifs: Move cached-dir functions into a separate file cifs: Remove {cifs,nfs}_fscache_release_page() cifs: fix lock length calculation
-
David Howells authored
Enable multipage folio support for the afs filesystem. Support has already been implemented in netfslib, fscache and cachefiles and in most of afs, but I've waited for Matthew Wilcox's latest folio changes. Note that it does require a change to afs_write_begin() to return the correct subpage. This is a "temporary" change as we're working on getting rid of the need for ->write_begin() and ->write_end() completely, at least as far as network filesystems are concerned - but it doesn't prevent afs from making use of the capability. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by:
<kafs-testing@auristor.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Misc timer fixes: - fix a potential use-after-free bug in posix timers - correct a prototype - address a build warning" * tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Cleanup CPU timers before freeing them during exec time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64 posix-timers: Make do_clock_gettime() static
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not turned on by default), which also need STIBP enabled (if available) to be '100% safe' on even the shortest speculation windows" * tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Enable STIBP for IBPB mitigated RETBleed
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: - two driver fixes for issues introduced this cycle - one trivial driver improvement regarding ACPI - more DTS conversion and additions - documentation updates - subsystem-wide move from strlcpy to strscpy * tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: i2c-sysfs: fix hyperlinks docs: i2c: i2c-sysfs: improve wording docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks docs: i2c: smbus-protocol: improve DataLow/DataHigh definition docs: i2c: i2c-protocol: remove unused legend items docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words docs: i2c: i2c-protocol: update introductory paragraph i2c: move core from strlcpy to strscpy i2c: move drivers from strlcpy to strscpy i2c: kempld: Support ACPI I2C device declaration i2c: mediatek: add i2c compatible for MT8188 dt-bindings: i2c: update bindings for mt8188 soc i2c: microchip-corei2c: fix erroneous late ack send dt-bindings: i2c: qcom,i2c-cci: convert to dtschema i2c: qcom-geni: Fix GPI DMA buffer sync-back
-
https://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull more xfs updates from Darrick Wong: "There's not a lot this time around, just the usual bug fixes and corrections for missing error returns. - Return error codes from block device flushes to userspace - Fix a deadlock between reclaim and mount time quotacheck - Fix an unnecessary ENOSPC return when doing COW on a filesystem with severe free space fragmentation - Fix a miscalculation in the transaction reservation computations for file removal operations" * tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix inode reservation space for removing transaction xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork xfs: fix intermittent hang during quotacheck xfs: check return codes when flushing block devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and trivial updates. The major new core update is a change to the way device, target and host reference counting is done to try to make it more robust (this change has soaked for a while to try to winkle out any bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix typo 'the the' in comment scsi: megaraid_sas: Remove redundant variable cmd_type scsi: FlashPoint: Remove redundant variable bm_int_st scsi: zfcp: Fix missing auto port scan and thus missing target ports scsi: core: Call blk_mq_free_tag_set() earlier scsi: core: Simplify LLD module reference counting scsi: core: Make sure that hosts outlive targets scsi: core: Make sure that targets outlive devices scsi: ufs: ufs-pci: Correct check for RESET DSM scsi: target: core: De-RCU of se_lun and se_lun acl scsi: target: core: Fix race during ACL removal scsi: ufs: core: Correct ufshcd_shutdown() flow scsi: ufs: core: Increase the maximum data buffer size scsi: lpfc: Check the return value of alloc_workqueue()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request - print nvme connect Linux error codes properly (Amit Engel) - fix the fc_appid_store return value (Christoph Hellwig) - fix a typo in an error message (Christophe JAILLET) - add another non-unique identifier quirk (Dennis P. Kliem) - check if the queue is allocated before stopping it in nvme-tcp (Maurizio Lombardi) - restart admin queue if the caller needs to restart queue in nvme-fc (Ming Lei) - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu) - __alloc_disk_node() error handling fix (Rafael) * tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block: block: Do not call blk_put_queue() if gendisk allocation fails nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 nvme-tcp: check if the queue is allocated before stopping it nvme-fabrics: Fix a typo in an error message nvme-fabrics: parse nvme connect Linux error codes nvmet-auth: use kmemdup instead of kmalloc + memcpy nvme-fc: fix the fc_appid_store return value nvme-fc: restart admin queue if the caller needs to restart queue
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Regression fix for this merge window, fixing a wrong order of arguments for io_req_set_res() for passthru (Dylan) - Fix for the audit code leaking context memory (Peilin) - Ensure that provided buffers are memcg accounted (Pavel) - Correctly handle short zero-copy sends (Pavel) - Sparse warning fixes for the recvmsg multishot command (Dylan) - Error handling fix for passthru (Anuj) - Remove randomization of struct kiocb fields, to avoid it growing in size if re-arranged in such a fashion that it grows more holes or padding (Keith, Linus) - Small series improving type safety of the sqe fields (Stefan) * tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block: io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields io_uring: make io_kiocb_to_cmd() typesafe fs: don't randomize struct kiocb fields io_uring: consistently make use of io_notif_to_data() io_uring: fix error handling for io_uring_cmd io_uring: fix io_recvmsg_prep_multishot sparse warnings io_uring/net: send retry for zerocopy io_uring: mem-account pbuf buckets audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker() io_uring: pass correct parameters to io_req_set_res
-