- Sep 19, 2023
-
-
Jijie Shao authored
[ Upstream commit fa556494 ] We hope that tc qdisc and dcb ets commands can not be used crosswise. If we want to use any of the commands to configure tc, We must use the other command to clear the existing configuration. However, when we configure a single tc with tc qdisc, we can still configure it with dcb ets. Because we use mqprio_active as the tag of tc qdisc configuration, but with dcb ets, we do not check mqprio_active. This patch fix this issue by check mqprio_active before executing the dcb ets command. and add dcb_ets_active to replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE at the hclge layer, Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hao Chen authored
[ Upstream commit c295160b ] Now in hns3_dbg_uninit(), there may be concurrency between kfree buffer and read, it may result in memory error. Moving debugfs_remove_recursive() in front of kfree buffer to ensure they don't happen at the same time. Fixes: 5e69ea7e ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hao Chen authored
[ Upstream commit efccf655 ] req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as (u32 *) without considerring byte order conversion, it may result in printing wrong data for tcam_data. Convert tcam_data to (__le32 *) first to fix it. Fixes: b5a0b70d ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jian Shen authored
[ Upstream commit 61a1deac ] Currently, the driver knocks the ring doorbell before updating the ring->last_to_use in tx flow. if the hardware transmiting packet and napi poll scheduling are fast enough, it may get the old ring->last_to_use in drivers' napi poll. In this case, the driver will think the tx is not completed, and return directly without clear the flag __QUEUE_STATE_STACK_XOFF, which may cause tx timeout. Fixes: 20d06ca2 ("net: hns3: optimize the tx clean process") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wander Lairson Costa authored
[ Upstream commit f4f8a780 ] The opt_num field is controlled by user mode and is not currently validated inside the kernel. An attacker can take advantage of this to trigger an OOB read and potentially leak information. BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88 Read of size 2 at addr ffff88804bc64272 by task poc/6431 CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1 Call Trace: nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88 nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281 nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47 expr_call_ops_eval net/netfilter/nf_tables_core.c:214 nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264 nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23 [..] Also add validation to genre, subtype and version fields. Fixes: 11eeef41 ("netfilter: passive OS fingerprint xtables match") Reported-by: Lucas Leong <wmliang@infosec.exchange> Signed-off-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit fd94d9da ] If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961). Fixes: 49499c3e ("netfilter: nf_tables: switch registers to 32 bit addressing") Fixes: 935b7f64 ("netfilter: nft_exthdr: add TCP option matching") Fixes: 133dc203 ("netfilter: nft_exthdr: Support SCTP chunks") Fixes: dbb5281a ("netfilter: nf_tables: add support for matching IPv4 options") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sebastian Andrzej Siewior authored
[ Upstream commit 6764e767 ] __bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before performing the recursion check which means in case of a recursion __bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx value. __bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx after the recursion check which means in case of a recursion __bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx isn't initialized upfront. Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made. Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens a few cycles later. Fixes: e384c7b7 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sebastian Andrzej Siewior authored
[ Upstream commit 7645629f ] If __bpf_prog_enter_sleepable_recur() detects recursion then it returns 0 without undoing rcu_read_lock_trace(), migrate_disable() or decrementing the recursion counter. This is fine in the JIT case because the JIT code will jump in the 0 case to the end and invoke the matching exit trampoline (__bpf_prog_exit_sleepable_recur()). This is not the case in kern_sys_bpf() which returns directly to the caller with an error code. Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case. Fixes: b1d18a75 ("bpf: Extend sys_bpf commands for bpf_syscall programs.") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Martin KaFai Lau authored
[ Upstream commit 271de525 ] The commit 64696c40 ("bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline") removed prog->active check for struct_ops prog. The bpf_lsm and bpf_iter is also using trampoline. Like struct_ops, the bpf_lsm and bpf_iter have fixed hooks for the prog to attach. The kernel does not call the same hook in a recursive way. This patch also removes the prog->active check for bpf_lsm and bpf_iter. A later patch has a test to reproduce the recursion issue for a sleepable bpf_lsm program. This patch appends the '_recur' naming to the existing enter and exit functions that track the prog->active counter. New __bpf_prog_{enter,exit}[_sleepable] function are added to skip the prog->active tracking. The '_struct_ops' version is also removed. It also moves the decision on picking the enter and exit function to the new bpf_trampoline_{enter,exit}(). It returns the '_recur' ones for all tracing progs to use. For bpf_lsm, bpf_iter, struct_ops (no prog->active tracking after 64696c40), and bpf_lsm_cgroup (no prog->active tracking after 69fd337a), it will return the functions that don't track the prog->active. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20221025184524.3526117-2-martin.lau@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Stable-dep-of: 7645629f ("bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 180a7419 ] The blamed commit left this delta behind: struct sja1105_cbs_entry { - u64 port; - u64 prio; + u64 port; /* Not used for SJA1110 */ + u64 prio; /* Not used for SJA1110 */ u64 credit_hi; u64 credit_lo; u64 send_slope; u64 idle_slope; }; but did not actually implement tc-cbs offload fully for the new switch. The offload is accepted, but it doesn't work. The difference compared to earlier switch generations is that now, the table of CBS shapers is sparse, because there are many more shapers, so the mapping between a {port, prio} and a table index is static, rather than requiring us to store the port and prio into the sja1105_cbs_entry. So, the problem is that the code programs the CBS shaper parameters at a dynamic table index which is incorrect. All that needs to be done for SJA1110 CBS shapers to work is to bypass the logic which allocates shapers in a dense manner, as for SJA1105, and use the fixed mapping instead. Fixes: 3e77e59b ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 894cafc5 ] After running command [2] too many times in a row: [1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 [2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \ idleslope 120000 sendslope -880000 locredit -1320 hicredit 180 (aka more than priv->info->num_cbs_shapers times) we start seeing the following error message: Error: Specified device failed to setup cbs hardware offload. This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents the same API for the qdisc create and replace cases, and the sja1105 driver fails to distinguish between the 2. Thus, it always thinks that it must allocate the same shaper for a {port, queue} pair, when it may instead have to replace an existing one. Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 954ad9bf ] More careful measurement of the tc-cbs bandwidth shows that the stream bandwidth (effectively idleslope) increases, there is a larger and larger discrepancy between the rate limit obtained by the software Qdisc, and the rate limit obtained by its offloaded counterpart. The discrepancy becomes so large, that e.g. at an idleslope of 40000 (40Mbps), the offloaded cbs does not actually rate limit anything, and traffic will pass at line rate through a 100 Mbps port. The reason for the discrepancy is that the hardware documentation I've been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which the credit counter is increased". Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf (for SJA1110), the wording is different: "This field specifies the value, in bytes per second times link speed, by which the credit counter is increased". So there's an extra scaling for link speed that the driver is currently not accounting for, and apparently (empirically), that link speed is expressed in Kbps. I've pondered whether to pollute the sja1105_mac_link_up() implementation with CBS shaper reprogramming, but I don't think it is worth it. IMO, the UAPI exposed by tc-cbs requires user space to recalculate the sendslope anyway, since the formula for that depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. So we use the offload->sendslope and offload->idleslope to deduce the original port_transmit_rate from the CBS formula, and use that value to scale the offload->sendslope and offload->idleslope to values that the hardware understands. Some numerical data points: 40Mbps stream, max interfering frame size 1500, port speed 100M --------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -60000 locredit -900 hicredit 600 which result in hardware values: Before (doesn't work) After (works) credit_hi 600 600 credit_lo 900 900 send_slope 7500000 75 idle_slope 5000000 50 40Mbps stream, max interfering frame size 1500, port speed 1G ------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -960000 locredit -1440 hicredit 60 which result in hardware values: Before (doesn't work) After (works) credit_hi 60 60 credit_lo 1440 1440 send_slope 120000000 120 idle_slope 5000000 5 5.12Mbps stream, max interfering frame size 1522, port speed 100M ----------------------------------------------------------------- tc-cbs parameters: idleslope 5120 sendslope -94880 locredit -1444 hicredit 77 which result in hardware values: Before (doesn't work) After (works) credit_hi 77 77 credit_lo 1444 1444 send_slope 11860000 118 idle_slope 640000 6 Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps. Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 9b271eba ] syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1] This can run from multiple cpus without mutual exclusion. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. [1] BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0: iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline] iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87 ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560 __dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] __bpf_tx_skb net/core/filter.c:2129 [inline] __bpf_redirect_no_mac net/core/filter.c:2159 [inline] __bpf_redirect+0x723/0x9c0 net/core/filter.c:2182 ____bpf_clone_redirect net/core/filter.c:2453 [inline] bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425 ___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954 __bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195 bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline] __bpf_prog_run include/linux/filter.h:609 [inline] bpf_prog_run include/linux/filter.h:616 [inline] bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423 bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045 bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996 __sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353 __do_sys_bpf kernel/bpf/syscall.c:5439 [inline] __se_sys_bpf kernel/bpf/syscall.c:5437 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000018830 -> 0x0000000000018831 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0 Fixes: 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ariel Marcovitch authored
[ Upstream commit 2a15de80 ] The relevant parameter is 'start' and not 'nextid' Fixes: 460488c5 ("idr: Remove idr_alloc_ext") Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 6252f47b ] When dev_set_name() fails, zcdn_create() doesn't free the newly allocated resources. Do it. Fixes: 00fab235 ("s390/zcrypt: multiple zcrypt device nodes support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230831110000.24279-1-andriy.shevchenko@linux.intel.com Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Olga Zaborska authored
[ Upstream commit 6319685b ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igb devices can use as low as 64 descriptors. This change will unify igb with other drivers. Based on commit 7b1be198 ("e1000e: lower ring minimum size to 64") Fixes: 9d5c8243 ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Olga Zaborska authored
[ Upstream commit 83607175 ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igbvf devices can use as low as 64 descriptors. This change will unify igbvf with other drivers. Based on commit 7b1be198 ("e1000e: lower ring minimum size to 64") Fixes: d4e0fe01 ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Olga Zaborska authored
[ Upstream commit 5aa48279 ] Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx value between 64 and 80. All igc devices can use as low as 64 descriptors. This change will unify igc with other drivers. Based on commit 7b1be198 ("e1000e: lower ring minimum size to 64") Fixes: 0507ef8a ("igc: Add transmit and receive fastpath and interrupt handlers") Signed-off-by: Olga Zaborska <olga.zaborska@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Geetha sowjanya authored
[ Upstream commit 29fe7a1b ] The smq value used in the CN10K NIX AQ instruction enqueue mailbox handler was truncated to 9-bit value from 10-bit value because of typecasting the CN10K mbox request structure to the CN9K structure. Though this hasn't caused any problems when programming the NIX SQ context to the HW because the context structure is the same size. However, this causes a problem when accessing the structure parameters. This patch reads the right smq value for each platform. Fixes: 30077d21 ("octeontx2-af: cn10k: Update NIX/NPA context structure") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Shigeru Yoshida authored
[ Upstream commit 6ad40b36 ] kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially needed if CONFIG_DEBUG_MUTEXES is enabled. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
valis authored
[ Upstream commit 8fc134fe ] When the plug qdisc is used as a class of the qfq qdisc it could trigger a UAF. This issue can be reproduced with following commands: tc qdisc add dev lo root handle 1: qfq tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512 tc qdisc add dev lo parent 1:1 handle 2: plug tc filter add dev lo parent 1: basic classid 1:1 ping -c1 127.0.0.1 and boom: [ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0 [ 285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144 [ 285.355903] [ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4 [ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 285.358376] Call Trace: [ 285.358773] <IRQ> [ 285.359109] dump_stack_lvl+0x44/0x60 [ 285.359708] print_address_description.constprop.0+0x2c/0x3c0 [ 285.360611] kasan_report+0x10c/0x120 [ 285.361195] ? qfq_dequeue+0xa7/0x7f0 [ 285.361780] qfq_dequeue+0xa7/0x7f0 [ 285.362342] __qdisc_run+0xf1/0x970 [ 285.362903] net_tx_action+0x28e/0x460 [ 285.363502] __do_softirq+0x11b/0x3de [ 285.364097] do_softirq.part.0+0x72/0x90 [ 285.364721] </IRQ> [ 285.365072] <TASK> [ 285.365422] __local_bh_enable_ip+0x77/0x90 [ 285.366079] __dev_queue_xmit+0x95f/0x1550 [ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10 [ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10 [ 285.368259] ? __build_skb_around+0x129/0x190 [ 285.368960] ? ip_generic_getfrag+0x12c/0x170 [ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 285.370390] ? csum_partial+0x8/0x20 [ 285.370961] ? raw_getfrag+0xe5/0x140 [ 285.371559] ip_finish_output2+0x539/0xa40 [ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10 [ 285.372954] ip_output+0x113/0x1e0 [ 285.373512] ? __pfx_ip_output+0x10/0x10 [ 285.374130] ? icmp_out_count+0x49/0x60 [ 285.374739] ? __pfx_ip_finish_output+0x10/0x10 [ 285.375457] ip_push_pending_frames+0xf3/0x100 [ 285.376173] raw_sendmsg+0xef5/0x12d0 [ 285.376760] ? do_syscall_64+0x40/0x90 [ 285.377359] ? __static_call_text_end+0x136578/0x136578 [ 285.378173] ? do_syscall_64+0x40/0x90 [ 285.378772] ? kasan_enable_current+0x11/0x20 [ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10 [ 285.380137] ? __sock_create+0x13e/0x270 [ 285.380673] ? __sys_socket+0xf3/0x180 [ 285.381174] ? __x64_sys_socket+0x3d/0x50 [ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.382425] ? __rcu_read_unlock+0x48/0x70 [ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380 [ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 285.384295] ? preempt_count_sub+0x14/0xc0 [ 285.384844] ? __list_del_entry_valid+0x76/0x140 [ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0 [ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10 [ 285.386645] ? release_sock+0xa0/0xd0 [ 285.387148] ? preempt_count_sub+0x14/0xc0 [ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0 [ 285.388341] ? aa_sk_perm+0x177/0x390 [ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10 [ 285.389441] ? check_stack_object+0x22/0x70 [ 285.390032] ? inet_send_prepare+0x2f/0x120 [ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10 [ 285.391172] sock_sendmsg+0xcc/0xe0 [ 285.391667] __sys_sendto+0x190/0x230 [ 285.392168] ? __pfx___sys_sendto+0x10/0x10 [ 285.392727] ? kvm_clock_get_cycles+0x14/0x30 [ 285.393328] ? set_normalized_timespec64+0x57/0x70 [ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40 [ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160 [ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10 [ 285.395908] ? _copy_to_user+0x3e/0x60 [ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.397734] ? do_syscall_64+0x71/0x90 [ 285.398258] __x64_sys_sendto+0x74/0x90 [ 285.398786] do_syscall_64+0x64/0x90 [ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.400605] ? do_syscall_64+0x71/0x90 [ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.401807] RIP: 0033:0x495726 [ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09 [ 285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726 [ 285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000 [ 285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c [ 285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634 [ 285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000 [ 285.410403] </TASK> [ 285.410704] [ 285.410929] Allocated by task 144: [ 285.411402] kasan_save_stack+0x1e/0x40 [ 285.411926] kasan_set_track+0x21/0x30 [ 285.412442] __kasan_slab_alloc+0x55/0x70 [ 285.412973] kmem_cache_alloc_node+0x187/0x3d0 [ 285.413567] __alloc_skb+0x1b4/0x230 [ 285.414060] __ip_append_data+0x17f7/0x1b60 [ 285.414633] ip_append_data+0x97/0xf0 [ 285.415144] raw_sendmsg+0x5a8/0x12d0 [ 285.415640] sock_sendmsg+0xcc/0xe0 [ 285.416117] __sys_sendto+0x190/0x230 [ 285.416626] __x64_sys_sendto+0x74/0x90 [ 285.417145] do_syscall_64+0x64/0x90 [ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.418306] [ 285.418531] Freed by task 144: [ 285.418960] kasan_save_stack+0x1e/0x40 [ 285.419469] kasan_set_track+0x21/0x30 [ 285.419988] kasan_save_free_info+0x27/0x40 [ 285.420556] ____kasan_slab_free+0x109/0x1a0 [ 285.421146] kmem_cache_free+0x1c2/0x450 [ 285.421680] __netif_receive_skb_core+0x2ce/0x1870 [ 285.422333] __netif_receive_skb_one_core+0x97/0x140 [ 285.423003] process_backlog+0x100/0x2f0 [ 285.423537] __napi_poll+0x5c/0x2d0 [ 285.424023] net_rx_action+0x2be/0x560 [ 285.424510] __do_softirq+0x11b/0x3de [ 285.425034] [ 285.425254] The buggy address belongs to the object at ffff8880bad31280 [ 285.425254] which belongs to the cache skbuff_head_cache of size 224 [ 285.426993] The buggy address is located 40 bytes inside of [ 285.426993] freed 224-byte region [ffff8880bad31280, ffff8880bad31360) [ 285.428572] [ 285.428798] The buggy address belongs to the physical page: [ 285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31 [ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1) [ 285.431447] page_type: 0xffffffff() [ 285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000 [ 285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 285.433562] page dumped because: kasan: bad access detected [ 285.434144] [ 285.434320] Memory state around the buggy address: [ 285.434828] ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.435580] ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 285.436777] ^ [ 285.437106] ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 285.437616] ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.438126] ================================================================== [ 285.438662] Disabling lock debugging due to kernel taint Fix this by: 1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a function compatible with non-work-conserving qdiscs 2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq. Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: valis <sec@valis.email> Signed-off-by: valis <sec@valis.email> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit b1928129 ] As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be read locklessly by unix_dgram_sendmsg(). Let's use READ_ONCE() for sk_err as well. Note that the writer side is marked by commit cc04410a ("af_unix: annotate lockless accesses to sk->sk_err"). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit afe8764f ] sk->sk_shutdown is changed under unix_state_lock(sk), but unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly. sock_alloc_send_pskb `- sock_wait_for_wmem Let's use READ_ONCE() there. Note that the writer side was marked by commit e1d09c2c ("af_unix: Fix data races around sk->sk_shutdown."). BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1053 __sock_release+0x7d/0x170 net/socket.c:654 sock_close+0x19/0x30 net/socket.c:1386 __fput+0x2a3/0x680 fs/file_table.c:384 ____fput+0x15/0x20 fs/file_table.c:412 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0: sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767 unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit ade32bd8 ] unix_tot_inflight is changed under spin_lock(unix_gc_lock), but unix_release_sock() reads it locklessly. Let's use READ_ONCE() for unix_tot_inflight. Note that the writer side was marked by commit 9d6d7f1c ("af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress") BUG: KCSAN: data-race in unix_inflight / unix_release_sock write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1: unix_inflight+0x130/0x180 net/unix/scm.c:64 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1832 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547 __sys_sendmsg+0x94/0x140 net/socket.c:2576 __do_sys_sendmsg net/socket.c:2585 [inline] __se_sys_sendmsg net/socket.c:2583 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0: unix_release_sock+0x608/0x910 net/unix/af_unix.c:671 unix_release+0x59/0x80 net/unix/af_unix.c:1058 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1385 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 9305cfa4 ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 0bc36c06 ] user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 712f4aad ("unix: properly account for FDs passed over unix sockets") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Fastabend authored
[ Upstream commit a454d84e ] There is a race where skb's from the sk_psock_backlog can be referenced after userspace side has already skb_consumed() the sk_buff and its refcnt dropped to zer0 causing use after free. The flow is the following: while ((skb = skb_peek(&psock->ingress_skb)) sk_psock_handle_Skb(psock, skb, ..., ingress) if (!ingress) ... sk_psock_skb_ingress sk_psock_skb_ingress_enqueue(skb) msg->skb = skb sk_psock_queue_msg(psock, msg) skb_dequeue(&psock->ingress_skb) The sk_psock_queue_msg() puts the msg on the ingress_msg queue. This is what the application reads when recvmsg() is called. An application can read this anytime after the msg is placed on the queue. The recvmsg hook will also read msg->skb and then after user space reads the msg will call consume_skb(skb) on it effectively free'ing it. But, the race is in above where backlog queue still has a reference to the skb and calls skb_dequeue(). If the skb_dequeue happens after the user reads and free's the skb we have a use after free. The !ingress case does not suffer from this problem because it uses sendmsg_*(sk, msg) which does not pass the sk_buff further down the stack. The following splat was observed with 'test_progs -t sockmap_listen': [ 1022.710250][ T2556] general protection fault, ... [...] [ 1022.712830][ T2556] Workqueue: events sk_psock_backlog [ 1022.713262][ T2556] RIP: 0010:skb_dequeue+0x4c/0x80 [ 1022.713653][ T2556] Code: ... [...] [ 1022.720699][ T2556] Call Trace: [ 1022.720984][ T2556] <TASK> [ 1022.721254][ T2556] ? die_addr+0x32/0x80^M [ 1022.721589][ T2556] ? exc_general_protection+0x25a/0x4b0 [ 1022.722026][ T2556] ? asm_exc_general_protection+0x22/0x30 [ 1022.722489][ T2556] ? skb_dequeue+0x4c/0x80 [ 1022.722854][ T2556] sk_psock_backlog+0x27a/0x300 [ 1022.723243][ T2556] process_one_work+0x2a7/0x5b0 [ 1022.723633][ T2556] worker_thread+0x4f/0x3a0 [ 1022.723998][ T2556] ? __pfx_worker_thread+0x10/0x10 [ 1022.724386][ T2556] kthread+0xfd/0x130 [ 1022.724709][ T2556] ? __pfx_kthread+0x10/0x10 [ 1022.725066][ T2556] ret_from_fork+0x2d/0x50 [ 1022.725409][ T2556] ? __pfx_kthread+0x10/0x10 [ 1022.725799][ T2556] ret_from_fork_asm+0x1b/0x30 [ 1022.726201][ T2556] </TASK> To fix we add an skb_get() before passing the skb to be enqueued in the engress queue. This bumps the skb->users refcnt so that consume_skb() and kfree_skb will not immediately free the sk_buff. With this we can be sure the skb is still around when we do the dequeue. Then we just need to decrement the refcnt or free the skb in the backlog case which we do by calling kfree_skb() on the ingress case as well as the sendmsg case. Before locking change from fixes tag we had the sock locked so we couldn't race with user and there was no issue here. Fixes: 799aa7f9 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") Reported-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Xu Kuohai <xukuohai@huawei.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20230901202137.214666-1-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Oleksij Rempel authored
[ Upstream commit 719c5e37 ] Previously, the defines for phy_device flags in the Micrel driver were ambiguous in their representation. They were intended to be bit masks but were mistakenly defined as bit positions. This led to the following issues: - MICREL_KSZ8_P1_ERRATA, designated for KSZ88xx switches, overlapped with MICREL_PHY_FXEN and MICREL_PHY_50MHZ_CLK. - Due to this overlap, the code path for MICREL_PHY_FXEN, tailored for the KSZ8041 PHY, was not executed for KSZ88xx PHYs. - Similarly, the code associated with MICREL_PHY_50MHZ_CLK wasn't triggered for KSZ88xx. To rectify this, all three flags have now been explicitly converted to use the `BIT()` macro, ensuring they are defined as bit masks and preventing potential overlaps in the future. Fixes: 49011e0c ("net: phy: micrel: ksz886x/ksz8081: add cabletest support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alex Henrie authored
[ Upstream commit f31867d0 ] The existing code incorrectly casted a negative value (the result of a subtraction) to an unsigned value without checking. For example, if /proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred lifetime would jump to 4 billion seconds. On my machine and network the shortest lifetime that avoided underflow was 3 seconds. Fixes: 76506a98 ("IPv6: fix DESYNC_FACTOR") Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Liang Chen authored
[ Upstream commit 151e887d ] The veth_xmit function returns NETDEV_TX_OK even when packets are dropped. This behavior leads to incorrect calculations of statistics counts, as well as things like txq->trans_start updates. Fixes: e314dbdc ("[NET]: Virtual ethernet device driver.") Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 817c7cd2 ] gve_rx_append_frags() is able to build skbs chained with frag_list, like GRO engine. Problem is that shinfo->frag_list should only be used for the head of the chain. All other links should use skb->next pointer. Otherwise, built skbs are not valid and can cause crashes. Equivalent code in GRO (skb_gro_receive()) is: if (NAPI_GRO_CB(p)->last == p) skb_shinfo(p)->frag_list = skb; else NAPI_GRO_CB(p)->last->next = skb; NAPI_GRO_CB(p)->last = skb; Fixes: 9b8dd5e5 ("gve: DQO: Add RX path") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Bailey Forrest <bcf@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Catherine Sullivan <csully@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Corinna Vinschen authored
[ Upstream commit fa09bc40 ] Disable virtualization features on 82580 just as on i210/i211. This avoids that virt functions are acidentally called on 82850. Fixes: 55cac248 ("igb: Add full support for 82580 devices") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sriram Yagnaraman authored
[ Upstream commit 8423be89 ] Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in fib6_select_path() and use it in ip6_can_use_hint() to check for the existence of the flag. Fixes: 197dbf24 ("ipv6: introduce and uses route look hints for list input.") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sriram Yagnaraman authored
[ Upstream commit 6ac66cb0 ] Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in ip_mkroute_input() and use it in ip_extract_route_hint() to check for the existence of the flag. Fixes: 02b24941 ("ipv4: use dst hint for ipv4 list receive") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 9531e4a8 ] msk->rmem_fwd_alloc can be read locklessly. Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(), and appropriate READ_ONCE()/WRITE_ONCE() annotations. Fixes: 6511882c ("mptcp: allocate fwd memory separately on the rx and tx path") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 5e6300e7 ] Every time sk->sk_forward_alloc is read locklessly, add a READ_ONCE(). Add sk_forward_alloc_add() helper to centralize updates, to reduce number of WRITE_ONCE(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 66d58f04 ] inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(), but sk_get_meminfo() was forgotten. Fixes: 292e6077 ("net: introduce sk_forward_alloc_get()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sean Christopherson authored
[ Upstream commit a90c367e ] Drop intel_vgpu_reset_gtt() as it no longer has any callers. In addition to eliminating dead code, this eliminates the last possible scenario where __kvmgt_protect_table_find() can be reached without holding vgpu_lock. Requiring vgpu_lock to be held when calling __kvmgt_protect_table_find() will allow a protecting the gfn hash with vgpu_lock without too much fuss. No functional change intended. Fixes: ba25d977 ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.") Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-11-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sean Christopherson authored
[ Upstream commit 708e4958 ] Put the struct page reference acquired by gfn_to_pfn(), KVM's API is that the caller is ultimately responsible for dropping any reference. Note, kvm_release_pfn_clean() ensures the pfn is actually a refcounted struct page before trying to put any references. Fixes: b901b252 ("drm/i915/gvt: Add 2M huge gtt support") Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sean Christopherson authored
[ Upstream commit f046923a ] Check that the pfn found by gfn_to_pfn() is actually backed by "struct page" memory prior to retrieving and dereferencing the page. KVM supports backing guest memory with VM_PFNMAP, VM_IO, etc., and so there is no guarantee the pfn returned by gfn_to_pfn() has an associated "struct page". Fixes: b901b252 ("drm/i915/gvt: Add 2M huge gtt support") Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yongwei Ma <yongwei.ma@intel.com> Reviewed-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://lore.kernel.org/r/20230729013535.1070024-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Magnus Karlsson authored
[ Upstream commit 3e019d8a ] Fix a use-after-free error that is possible if the xsk_diag interface is used after the socket has been unbound from the device. This can happen either due to the socket being closed or the device disappearing. In the early days of AF_XDP, the way we tested that a socket was not bound to a device was to simply check if the netdevice pointer in the xsk socket structure was NULL. Later, a better system was introduced by having an explicit state variable in the xsk socket struct. For example, the state of a socket that is on the way to being closed and has been unbound from the device is XSK_UNBOUND. The commit in the Fixes tag below deleted the old way of signalling that a socket is unbound, setting dev to NULL. This in the belief that all code using the old way had been exterminated. That was unfortunately not true as the xsk diagnostics code was still using the old way and thus does not work as intended when a socket is going down. Fix this by introducing a test against the state variable. If the socket is in the state XSK_UNBOUND, simply abort the diagnostic's netlink operation. Fixes: 18b1ab7a ("xsk: Fix race at socket teardown") Reported-by: <syzbot+822d1359297e2694f873@syzkaller.appspotmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: <syzbot+822d1359297e2694f873@syzkaller.appspotmail.com> Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-