- Apr 09, 2013
-
-
Javier Martinez Canillas authored
ISEE IGEP COM Module is an TI OMAP3 SoC computer on module. This patch adds an initial device tree support to boot an IGEP COM Module from the MMC/SD. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [b-cousson@ti.com: Update the Makefile for 3.8-rc2] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-
Javier Martinez Canillas authored
ISEE IGEPv2 is an TI OMAP3 SoC based embedded board. This patch adds an initial device tree support to boot an IGEPv2 from the MMC/SD. Currently is working everything that is supported by DT on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio). Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> [benoit.cousson@linaro.org: Update the Makefile for 3.8-rc2] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
-
- Mar 01, 2013
-
-
Gregory CLEMENT authored
This is the new Armada XP evaluation board from Marvell. It comes with a RS232 port over USB, a SATA link, an internal SSD, 4 Ethernet Gigabit links. Support for USB (Host and device), SDIO, PCIe will be added as drivers when they become available for Armada XP in mainline. Tested-by: Simon Guinot <simon.guinot@sequanux.org> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Willy Tarreau authored
Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Florian Fainelli authored
This patch adds the DTS file to support the Marvell RD-A370-A1 (Reference Design board) also known as RD-88F6710 board. It is almost entirely similar to the DB-A370 board except that the first Ethernet PHY is SGMII-wired and the second is a switch which is RGMII-wired. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
- Feb 12, 2013
-
-
Dinh Nguyen authored
Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Tested-by: Pavel Machek <pavel@denx.de> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Feb 10, 2013
-
-
Laurent Cans authored
Signed-off-by: Laurent Cans <laurent.cans@gmail.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Steffen Trumtrar authored
The MBa53 is a baseboard for the TQMA53 embedded module. This enables/adds only supported devices, i.e. it is not feature complete, because of missing drivers in mainline linux. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Add basic device tree support for mx25pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Add missing imx dtb targets, so that make dtbs can cover all imx dtbs. It's pretty useful for testing dts changes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Fabio Estevam authored
Add an entry for imx27-pdk.dtb, so that it can be generated by default. Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Jan 29, 2013
-
-
Linus Walleij authored
Support basic device tree boot on the Nomadik. Implement the support in the cpu file with the intent of deleting the board files later. At this stage IRQ controllers, system timer, l2x0 cache, UARTs and thus console boot is fully functional. Patch out the code adding devices by initcalls for now so as not to disturb the boot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Lucas Stach authored
This adds the device tree for the Toradex Iris carrier board used together with a Colibri T20 512MB COM. The Iris has the following features, in brackets the current status: - DVI and VGA output through DVI-I connector (DVI-D enabled and tested) - LVDS output - 1 USB host port (enabled and tested) - 1 USB OTG port (enabled) - 100 MBit Ethernet (enabled and tested) - 5 UART ports (2 on 10way headers enabled and tested) - 1 MicroSD Slot (enabled and tested) - Audio connectors (enabled, only HP out and Line-in tested) - i2c RTC - GPIO connector (enabled, only sparsely tested) - external i2c bus - 4 PWM out - analog in Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Bryan Wu authored
This patch adds support for Tegra30 Beaver board in upstream kernel. Beaver board is a Tegra30 SoC based development board, it has following features: - T30 or T33 SoC (Qual core ARM Cortex A9) - 2 GB DDR3L - 16 GB EMMC - 1 SD slot - 1 USB Standart A port and 1 USB micro AB port - PCI-E Gig Ethernet - Audio input/output - SATA port - HDMI output - UART and JTAG Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Hiroshi Doyu authored
Add a new evaluation board, Pluto for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Hiroshi Doyu authored
Add a new evaluation board, Dalmore for Tegra 114 family. Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
- Jan 26, 2013
-
-
Maxime Ripard authored
The CFA-10037 is another expansion board for the CFA-10036 module, with only a USB Host, a Ethernet device and a lot of gpios. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
- Jan 22, 2013
-
-
Barry Song authored
this patch adds tick timer, smp entries and generic DT machine for SiRFmarco dual-core SMP chips. with the added marco, we change the defconfig, using the same defconfig, we get a zImage which can work on both prima2 and marco. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Mark Rutland <mark.rutland@arm.com>
-
Tony Prisk authored
This patch adds a soc dtsi for the Wondermedia WM8850. A board dts file is also included for the W70v2 tablet, with support for all the drivers currently in mainline. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Jan 14, 2013
-
-
Stephen Warren authored
if_changed (used by the *.dts->*.dtc rule) rebuilds files if they aren't contained in $(targets). (make V=2 indicates this). Add $(dtb-y) to $(targets) to prevent *.dtb from always being rebuilt. This fixes a regression introduced by the .dtb rule rework in 499cd829 "ARM: dt: change .dtb build rules to build in dts directory". Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
-
- Jan 09, 2013
-
-
Maxime Ripard authored
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
- Dec 22, 2012
-
-
Kukjin Kim authored
Commit db5b0ae0 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc" ) causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- Dec 18, 2012
-
-
Maxime Ripard authored
There is several different SoCs sharing the sun5i codename: A10s, A12 and A13. Since there is enough differences to not consider those the same SoCs, change a bit the naming scheme to reflect this. Moreover, some boards like the olinuxino come in A10s and A13 variants, which also share the same SoC codename. So change the naming scheme to reflect both the codename and the market name of the SoCs used in the dtsi and in the board files Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- Dec 15, 2012
-
-
Jon Hunter authored
Commit 0d9250c4 (ARM: dts: omap4-panda: Add pinmux configuration for HDMI) added a new device-tree source file for Rev A4 of the OMAP4430 Panda board but it did not add this version to the makefile. Hence, add this file to the makefile. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- Dec 04, 2012
-
-
Grant Likely authored
The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
-
- Nov 27, 2012
-
-
Fabio Baltieri authored
This adds hrefprev60, hrefv60plus and ccu9540 to device trees compiled during build. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
-
- Nov 26, 2012
-
-
Shiraz Hashim authored
This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-
- Nov 22, 2012
-
-
Nobuhiro Iwamatsu authored
Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Kukjin Kim authored
This patch adds initial dts file for EXYNOS5440 SoC and adds the dts file for SSDK5440 board which is a kind of reference board. More properties will be added later. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Thomas Petazzoni authored
This commit converts the 'LaCie Ethernet Disk mini v2' board to the Device Tree. All devices that have existing Device Tree bindings are converted over to the Device Tree, the other devices remain instantiated in the old way, until the respective drivers get the needed Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested by: Maxime Hadjinlian <mhadjinlian@lacie.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Stefan Peter authored
Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Tero Jaasko authored
Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Jason Cooper authored
This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-
Simon Guinot authored
This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Simon Guinot authored
This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
Simon Guinot authored
This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
- Nov 21, 2012
-
-
Doug Anderson authored
This dts file is based on the Snow dts file in the Chromium OS kernel tree with the following changes: * Some details have been updated to match the exynos5250-smdk5250.dts file from linux-next (as of c11068538994430547722dc9fb515a0ceefd5cb9). * This file doesn't include references to hardware whose upstream support isn't quite there yet. That includes most i2c devices. Note that most i2c busses have been included with no devices. The Snow dts file is mostly just an include of the "cros5250" dts file which describes a class of similar boards. Support for other boards has not yet been send upstream. With this file and a change to use UART3 for serial output I can: * Boot to a command line using either SD or EMMC as a root filesystem * See the power button and lid switch using evtest. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- Nov 20, 2012
-
-
Stefan Roese authored
This patch adds support for the Cubieboard based on the Allwinner A10/sun4i SoC. Currently only UART is supported. Other devices will eventually follow. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
Marek Vasut authored
Add DTS file for this custom board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Christian Daudt authored
In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-