- Feb 02, 2023
-
-
Ratheesh Kannoth authored
Exact match feature is only available in CN10K-B. Unregister exact match devlink entry only for this silicon variant. Fixes: 87e4ea29 ("octeontx2-af: Debugsfs support for exact match.") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230131061659.1025137-1-rkannoth@marvell.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Tom Rix authored
clang static analysis reports drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of '+' is a garbage value [core.UndefinedBinaryOperatorResult] ktime_add_ns(shhwtstamps.hwtstamp, adjust); ^ ~~~~~~~~~~~~~~~~~~~~ igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp if the mac type is unknown. This should be treated as an error. Fixes: 81b05520 ("igc: Add support for RX timestamping") Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yanguo Li authored
A mutex may sleep, which is not permitted in atomic context. Avoid a case where this may arise by moving the to nfp_flower_lag_get_info_from_netdev() in nfp_tun_write_neigh() spinlock. Fixes: abc21095 ("nfp: flower: tunnel neigh support bond offload") Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Yanguo Li <yanguo.li@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230131080313.2076060-1-simon.horman@corigine.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Thomas Winter says: ==================== ip/ip6_gre: Fix GRE tunnels not generating IPv6 link local addresses For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they come up to generate the IPv6 link local address for the interface. Recently we found that they were no longer generating IPv6 addresses. Also, non-point-to-point tunnels were not generating any IPv6 link local address and instead generating an IPv6 compat address, breaking IPv6 communication on the tunnel. These failures were caused by commit e5dd7294 and this patch set aims to resolve these issues. ==================== Link: https://lore.kernel.org/r/20230131034646.237671-1-Thomas.Winter@alliedtelesis.co.nz Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Thomas Winter authored
We recently found that our non-point-to-point tunnels were not generating any IPv6 link local address and instead generating an IPv6 compat address, breaking IPv6 communication on the tunnel. Previously, addrconf_gre_config always would call addrconf_addr_gen and generate a EUI64 link local address for the tunnel. Then commit e5dd7294 changed the code path so that add_v4_addrs is called but this only generates a compat IPv6 address for non-point-to-point tunnels. I assume the compat address is specifically for SIT tunnels so have kept that only for SIT - GRE tunnels now always generate link local addresses. Fixes: e5dd7294 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by:
Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Thomas Winter authored
For our point-to-point GRE tunnels, they have IN6_ADDR_GEN_MODE_NONE when they are created then we set IN6_ADDR_GEN_MODE_EUI64 when they come up to generate the IPv6 link local address for the interface. Recently we found that they were no longer generating IPv6 addresses. This issue would also have affected SIT tunnels. Commit e5dd7294 changed the code path so that GRE tunnels generate an IPv6 address based on the tunnel source address. It also changed the code path so GRE tunnels don't call addrconf_addr_gen in addrconf_dev_config which is called by addrconf_sysctl_addr_gen_mode when the IN6_ADDR_GEN_MODE is changed. This patch aims to fix this issue by moving the code in addrconf_notify which calls the addr gen for GRE and SIT into a separate function and calling it in the places that expect the IPv6 address to be generated. The previous addrconf_dev_config is renamed to addrconf_eth_config since it only expected eth type interfaces and follows the addrconf_gre/sit_config format. A part of this changes means that the loopback address will be attempted to be configured when changing addr_gen_mode for lo. This should not be a problem because the address should exist anyway and if does already exist then no error is produced. Fixes: e5dd7294 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address") Signed-off-by:
Thomas Winter <Thomas.Winter@alliedtelesis.co.nz> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Feb 01, 2023
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Release bridge info once packet escapes the br_netfilter path, from Florian Westphal. 2) Revert incorrect fix for the SCTP connection tracking chunk iterator, also from Florian. First path fixes a long standing issue, the second path addresses a mistake in the previous pull request for net. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: Revert "netfilter: conntrack: fix bug in for_each_sctp_chunk" netfilter: br_netfilter: disable sabotage_in hook after first suppression ==================== Link: https://lore.kernel.org/r/20230131133158.4052-1-pablo@netfilter.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Chris Healy authored
The Meson G12A Internal PHY does not support standard IEEE MMD extended register access, therefore add generic dummy stubs to fail the read and write MMD calls. This is necessary to prevent the core PHY code from erroneously believing that EEE is supported by this PHY even though this PHY does not support EEE, as MMD register access returns all FFFFs. Fixes: 5c3407ab ("net: phy: meson-gxl: add g12a support") Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Chris Healy <healych@amazon.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230130231402.471493-1-cphealy@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yan Zhai authored
Commit 3a1296a3 ("net: Support GRO/GSO fraglist chaining.") introduced UDP listifyed GRO. The segmentation relies on frag_list being untouched when passing through the network stack. This assumption can be broken sometimes, where frag_list itself gets pulled into linear area, leaving frag_list being NULL. When this happens it can trigger following NULL pointer dereference, and panic the kernel. Reverse the test condition should fix it. [19185.577801][ C1] BUG: kernel NULL pointer dereference, address: ... [19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390 ... [19185.834644][ C1] Call Trace: [19185.841730][ C1] <TASK> [19185.848563][ C1] __udp_gso_segment+0x33e/0x510 [19185.857370][ C1] inet_gso_segment+0x15b/0x3e0 [19185.866059][ C1] skb_mac_gso_segment+0x97/0x110 [19185.874939][ C1] __skb_gso_segment+0xb2/0x160 [19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0 [19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90 [19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200 [19185.910003][ C1] ip_local_deliver_finish+0x44/0x60 [19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0 [19185.927834][ C1] process_backlog+0x88/0x130 [19185.935840][ C1] __napi_poll+0x27/0x150 [19185.943447][ C1] net_rx_action+0x27e/0x5f0 [19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core] [19185.960848][ C1] __do_softirq+0xbc/0x25d [19185.968607][ C1] irq_exit_rcu+0x83/0xb0 [19185.976247][ C1] common_interrupt+0x43/0xa0 [19185.984235][ C1] asm_common_interrupt+0x22/0x40 ... [19186.094106][ C1] </TASK> Fixes: 3a1296a3 ("net: Support GRO/GSO fraglist chaining.") Suggested-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Yan Zhai <yan@cloudflare.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/Y9gt5EUizK1UImEP@debian Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
When memory allocation fails in lynx_pcs_create() and it returns NULL, there remains a dangling reference to the mdiodev returned by of_mdio_find_device() which is leaked as soon as memac_pcs_create() returns empty-handed. Fixes: a7c2a32e ("net: fman: memac: Use lynx pcs driver") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Sean Anderson <sean.anderson@seco.com> Acked-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://lore.kernel.org/r/20230130193051.563315-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
It tries to avoid the frequently hb_timer refresh in commit ba6f5e33 ("sctp: avoid refreshing heartbeat timer too often"), and it only allows mod_timer when the new expires is after hb_timer.expires. It means even a much shorter interval for hb timer gets applied, it will have to wait until the current hb timer to time out. In sctp_do_8_2_transport_strike(), when a transport enters PF state, it expects to update the hb timer to resend a heartbeat every rto after calling sctp_transport_reset_hb_timer(), which will not work as the change mentioned above. The frequently hb_timer refresh was caused by sctp_transport_reset_timers() called in sctp_outq_flush() and it was already removed in the commit above. So we don't have to check hb_timer.expires when resetting hb_timer as it is now not called very often. Fixes: ba6f5e33 ("sctp: avoid refreshing heartbeat timer too often") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/d958c06985713ec84049a2d5664879802710179a.1675095933.git.lucien.xin@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jan 31, 2023
-
-
Florian Westphal authored
There is no bug. If sch->length == 0, this would result in an infinite loop, but first caller, do_basic_checks(), errors out in this case. After this change, packets with bogus zero-length chunks are no longer detected as invalid, so revert & add comment wrt. 0 length check. Fixes: 98ee0077 ("netfilter: conntrack: fix bug in for_each_sctp_chunk") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
When using a xfrm interface in a bridged setup (the outgoing device is bridged), the incoming packets in the xfrm interface are only tracked in the outgoing direction. $ brctl show bridge name interfaces br_eth1 eth1 $ conntrack -L tcp 115 SYN_SENT src=192... dst=192... [UNREPLIED] ... If br_netfilter is enabled, the first (encrypted) packet is received onR eth1, conntrack hooks are called from br_netfilter emulation which allocates nf_bridge info for this skb. If the packet is for local machine, skb gets passed up the ip stack. The skb passes through ip prerouting a second time. br_netfilter ip_sabotage_in supresses the re-invocation of the hooks. After this, skb gets decrypted in xfrm layer and appears in network stack a second time (after decryption). Then, ip_sabotage_in is called again and suppresses netfilter hook invocation, even though the bridge layer never called them for the plaintext incarnation of the packet. Free the bridge info after the first suppression to avoid this. I was unable to figure out where the regression comes from, as far as i can see br_netfilter always had this problem; i did not expect that skb is looped again with different headers. Fixes: c4b0e771 ("netfilter: avoid using skb->nf_bridge directly") Reported-and-tested-by:
Wolfgang Nothdurft <wolfgang@linogate.de> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Kees Cook authored
Nothing was explicitly bounds checking the priority index used to access clpriop[]. WARN and bail out early if it's pathological. Seen with GCC 13: ../net/sched/sch_htb.c: In function 'htb_activate_prios': ../net/sched/sch_htb.c:437:44: warning: array subscript [0, 31] is outside array bounds of 'struct htb_prio[8]' [-Warray-bounds=] 437 | if (p->inner.clprio[prio].feed.rb_node) | ~~~~~~~~~~~~~~~^~~~~~ ../net/sched/sch_htb.c:131:41: note: while referencing 'clprio' 131 | struct htb_prio clprio[TC_HTB_NUMPRIO]; | ^~~~~~ Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20230127224036.never.561-kees@kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Kees Cook authored
There doesn't appear to be a reason to truncate the allocation used for flow_info, so do a full allocation and remove the unused empty struct. GCC does not like having a reference to an object that has been partially allocated, as bounds checking may become impossible when such an object is passed to other code. Seen with GCC 13: ../drivers/net/ethernet/mediatek/mtk_ppe.c: In function 'mtk_foe_entry_commit_subflow': ../drivers/net/ethernet/mediatek/mtk_ppe.c:623:18: warning: array subscript 'struct mtk_flow_entry[0]' is partly outside array bounds of 'unsigned char[48]' [-Warray-bounds=] 623 | flow_info->l2_data.base_flow = entry; | ^~ Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Mark Lee <Mark-MC.Lee@mediatek.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230127223853.never.014-kees@kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2023-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-01-30 Only one fix this time around. Miquel Raynal fixed a potential double free spotted by Dan Carpenter. * tag 'ieee802154-for-net-2023-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan: mac802154: Fix possible double free upon parsing error ==================== Link: https://lore.kernel.org/r/20230130095646.301448-1-stefan@datenfreihafen.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Pietro Borrello authored
tls_is_tx_ready() checks that list_first_entry() does not return NULL. This condition can never happen. For empty lists, list_first_entry() returns the list_entry() of the head, which is a type confusion. Use list_first_entry_or_null() which returns NULL in case of empty lists. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230128-list-entry-null-check-tls-v1-1-525bbfe6f0d0@diag.uniroma1.it Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-27 (ice) This series contains updates to ice driver only. Dave prevents modifying channels when RDMA is active as this will break RDMA traffic. Michal fixes a broken URL. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix broken link in ice NAPI doc ice: Prevent set_channel from changing queues while RDMA active ==================== Link: https://lore.kernel.org/r/20230127225333.1534783-1-anthony.l.nguyen@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Jan 30, 2023
-
-
Colin Foster authored
Commit bc66fa87 ("net: phy: Add link between phy dev and mac dev") introduced a link between net devices and phy devices. It fails to check whether dev is NULL, leading to a NULL dereference error. Fixes: bc66fa87 ("net: phy: Add link between phy dev and mac dev") Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hyunwoo Kim authored
If you call listen() and accept() on an already connect()ed AF_NETROM socket, accept() can successfully connect. This is because when the peer socket sends data to sendmsg, the skb with its own sk stored in the connected socket's sk->sk_receive_queue is connected, and nr_accept() dequeues the skb waiting in the sk->sk_receive_queue. As a result, nr_accept() allocates and returns a sock with the sk of the parent AF_NETROM socket. And here use-after-free can happen through complex race conditions: ``` cpu0 cpu1 1. socket_2 = socket(AF_NETROM) . . listen(socket_2) accepted_socket = accept(socket_2) 2. socket_1 = socket(AF_NETROM) nr_create() // sk refcount : 1 connect(socket_1) 3. write(accepted_socket) nr_sendmsg() nr_output() nr_kick() nr_send_iframe() nr_transmit_buffer() nr_route_frame() nr_loopback_queue() nr_loopback_timer() nr_rx_frame() nr_process_rx_frame(sk, skb); // sk : socket_1's sk nr_state3_machine() nr_queue_rx_frame() sock_queue_rcv_skb() sock_queue_rcv_skb_reason() __sock_queue_rcv_skb() __skb_queue_tail(list, skb); // list : socket_1's sk->sk_receive_queue 4. listen(socket_1) nr_listen() uaf_socket = accept(socket_1) nr_accept() skb_dequeue(&sk->sk_receive_queue); 5. close(accepted_socket) nr_release() nr_write_internal(sk, NR_DISCREQ) nr_transmit_buffer() // NR_DISCREQ nr_route_frame() nr_loopback_queue() nr_loopback_timer() nr_rx_frame() // sk : socket_1's sk nr_process_rx_frame() // NR_STATE_3 nr_state3_machine() // NR_DISCREQ nr_disconnect() nr_sk(sk)->state = NR_STATE_0; 6. close(socket_1) // sk refcount : 3 nr_release() // NR_STATE_0 sock_put(sk); // sk refcount : 0 sk_free(sk); close(uaf_socket) nr_release() sock_hold(sk); // UAF ``` KASAN report by syzbot: ``` BUG: KASAN: use-after-free in nr_release+0x66/0x460 net/netrom/af_netrom.c:520 Write of size 4 at addr ffff8880235d8080 by task syz-executor564/5128 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:306 [inline] print_report+0x15e/0x461 mm/kasan/report.c:417 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x141/0x190 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:102 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:116 [inline] __refcount_add include/linux/refcount.h:193 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] sock_hold include/net/sock.h:775 [inline] nr_release+0x66/0x460 net/netrom/af_netrom.c:520 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x1c/0x20 net/socket.c:1365 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xaa8/0x2950 kernel/exit.c:867 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012 get_signal+0x21c3/0x2450 kernel/signal.c:2859 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6c19e3c9b9 Code: Unable to access opcode bytes at 0x7f6c19e3c98f. RSP: 002b:00007fffd4ba2ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: 0000000000000116 RBX: 0000000000000003 RCX: 00007f6c19e3c9b9 RDX: 0000000000000318 RSI: 00000000200bd000 RDI: 0000000000000006 RBP: 0000000000000003 R08: 000000000000000d R09: 000000000000000d R10: 0000000000000000 R11: 0000000000000246 R12: 000055555566a2c0 R13: 0000000000000011 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5128: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] ____kasan_kmalloc mm/kasan/common.c:330 [inline] __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slab_common.c:968 [inline] __kmalloc+0x5a/0xd0 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] sk_prot_alloc+0x140/0x290 net/core/sock.c:2038 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433 __sock_create+0x359/0x790 net/socket.c:1515 sock_create net/socket.c:1566 [inline] __sys_socket_create net/socket.c:1603 [inline] __sys_socket_create net/socket.c:1588 [inline] __sys_socket+0x133/0x250 net/socket.c:1636 __do_sys_socket net/socket.c:1649 [inline] __se_sys_socket net/socket.c:1647 [inline] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 5128: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] __cache_free mm/slab.c:3394 [inline] __do_kmem_cache_free mm/slab.c:3580 [inline] __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587 sk_prot_free net/core/sock.c:2074 [inline] __sk_destruct+0x5df/0x750 net/core/sock.c:2166 sk_destruct net/core/sock.c:2181 [inline] __sk_free+0x175/0x460 net/core/sock.c:2192 sk_free+0x7c/0xa0 net/core/sock.c:2203 sock_put include/net/sock.h:1991 [inline] nr_release+0x39e/0x460 net/netrom/af_netrom.c:554 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x1c/0x20 net/socket.c:1365 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xaa8/0x2950 kernel/exit.c:867 do_group_exit+0xd4/0x2a0 kernel/exit.c:1012 get_signal+0x21c3/0x2450 kernel/signal.c:2859 arch_do_signal_or_restart+0x79/0x5c0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd ``` To fix this issue, nr_listen() returns -EINVAL for sockets that successfully nr_connect(). Reported-by:
<syzbot+caa188bdfc1eeafeb418@syzkaller.appspotmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Hyunwoo Kim <v4bel@theori.io> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Konovalov authored
Currently in phy_init_eee() the driver unconditionally configures the PHY to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt storm on my qcs404-base board. Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible device RX_CLK continues to run even in Rx LPI state. Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 28, 2023
-
-
Andrei Gherzan authored
"tcpdump" is used to capture traffic in these tests while using a random, temporary and not suffixed file for it. This can interfere with apparmor configuration where the tool is only allowed to read from files with 'known' extensions. The MINE type application/vnd.tcpdump.pcap was registered with IANA for pcap files and .pcap is the extension that is both most common but also aligned with standard apparmor configurations. See TCPDUMP(8) for more details. This improves compatibility with standard apparmor configurations by using ".pcap" as the file extension for the tests' temporary files. Signed-off-by:
Andrei Gherzan <andrei.gherzan@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Kornel Dulęba says: ==================== net: wwan: t7xx: Fix Runtime PM implementation d10b3a69 ("net: wwan: t7xx: Runtime PM") introduced support for Runtime PM for this driver, but due to a bug in the initialization logic the usage refcount would never reach 0, leaving the feature unused. This patchset addresses that, together with a bug found after runtime suspend was enabled. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kornel Dulęba authored
For PCI devices the Runtime PM refcount is incremented twice: 1. During device enumeration with a call to pm_runtime_forbid. 2. Just before a driver probe logic is called. Because of that in order to enable Runtime PM on a given device we have to call both pm_runtime_allow and pm_runtime_put_noidle, once it's ready to be runtime suspended. The former was missing causing the pm refcount to never reach 0. Fixes: d10b3a69 ("net: wwan: t7xx: Runtime PM") Signed-off-by:
Kornel Dulęba <mindal@semihalf.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kornel Dulęba authored
Resume device before calling napi_schedule, instead of doing in the napi poll routine. Polling is done in softrq context. We can't call the PM resume logic from there as it's blocking and not irq safe. In order to make it work modify the interrupt handler to be run from irq handler thread. Fixes: 5545b7b9 ("net: wwan: t7xx: Add NAPI support") Signed-off-by:
Kornel Dulęba <mindal@semihalf.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
We may have pending skbs in the receive queue when the sk is being destroyed; add a destructor to purge the queue. MCTP doesn't use the error queue, so only the receive_queue is purged. Fixes: 833ef3b9 ("mctp: Populate socket implementation") Signed-off-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230126064551.464468-1-jk@codeconstruct.com.au Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Andre Kalb authored
The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that. Fixes: 5dc39fd5 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by:
Andre Kalb <andre.kalb@sma.de> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/Y9FzniUhUtbaGKU7@pc6682 Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Natalia Petrova authored
Function radix_tree_insert() returns errors if the node hasn't been initialized and added to the tree. "kfree(node)" and return value "NULL" of node_get() help to avoid using unclear node in other calls. Found by Linux Verification Center (linuxtesting.org) with SVACE. Cc: <stable@vger.kernel.org> # 5.7 Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by:
Natalia Petrova <n.petrova@fintech.ru> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20230125134831.8090-1-n.petrova@fintech.ru Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Hyunwoo Kim authored
If you call listen() and accept() on an already connect()ed rose socket, accept() can successfully connect. This is because when the peer socket sends data to sendmsg, the skb with its own sk stored in the connected socket's sk->sk_receive_queue is connected, and rose_accept() dequeues the skb waiting in the sk->sk_receive_queue. This creates a child socket with the sk of the parent rose socket, which can cause confusion. Fix rose_listen() to return -EINVAL if the socket has already been successfully connected, and add lock_sock to prevent this issue. Signed-off-by:
Hyunwoo Kim <v4bel@theori.io> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230125105944.GA133314@ubuntu Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Íñigo Huguet authored
Recent sfc NICs are TSO capable for some tunnel protocols. However, it was not working properly because the feature was not advertised in hw_enc_features, but in hw_features only. Setting up a GENEVE tunnel and using iperf3 to send IPv4 and IPv6 traffic to the tunnel show, with tcpdump, that the IPv4 packets still had ~64k size but the IPv6 ones had only ~1500 bytes (they had been segmented by software, not offloaded). With this patch segmentation is offloaded as expected and the traffic is correctly received at the other end. Fixes: 24b2c375 ("sfc: advertise encapsulated offloads on EF10") Reported-by:
Tianhao Zhao <tizhao@redhat.com> Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230125143513.25841-1-ihuguet@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== bpf 2023-01-27 We've added 10 non-merge commits during the last 9 day(s) which contain a total of 10 files changed, 170 insertions(+), 59 deletions(-). The main changes are: 1) Fix preservation of register's parent/live fields when copying range-info, from Eduard Zingerman. 2) Fix an off-by-one bug in bpf_mem_cache_idx() to select the right cache, from Hou Tao. 3) Fix stack overflow from infinite recursion in sock_map_close(), from Jakub Sitnicki. 4) Fix missing btf_put() in register_btf_id_dtor_kfuncs()'s error path, from Jiri Olsa. 5) Fix a splat from bpf_setsockopt() via lsm_cgroup/socket_sock_rcv_skb, from Kui-Feng Lee. 6) Fix bpf_send_signal[_thread]() helpers to hold a reference on the task, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix the kernel crash caused by bpf_setsockopt(). selftests/bpf: Cover listener cloning with progs attached to sockmap selftests/bpf: Pass BPF skeleton to sockmap_listen ops tests bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself bpf: Add missing btf_put to register_btf_id_dtor_kfuncs selftests/bpf: Verify copy_register_state() preserves parent/live fields bpf: Fix to preserve reg parent/live fields when copying range info bpf: Fix a possible task gone issue with bpf_send_signal[_thread]() helpers bpf: Fix off-by-one error in bpf_mem_cache_idx() ==================== Link: https://lore.kernel.org/r/20230127215820.4993-1-daniel@iogearbox.net Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Alexander Duyck authored
GSO should not merge page pool recycled frames with standard reference counted frames. Traditionally this didn't occur, at least not often. However as we start looking at adding support for wireless adapters there becomes the potential to mix the two due to A-MSDU repartitioning frames in the receive path. There are possibly other places where this may have occurred however I suspect they must be few and far between as we have not seen this issue until now. Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool") Reported-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Alexander Duyck <alexanderduyck@fb.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/167475990764.1934330.11960904198087757911.stgit@localhost.localdomain Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Arınç ÜNAL authored
Fix description for tristate and help sections which include inaccurate information. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230126190110.9124-1-arinc.unal@arinc9.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Magnus Karlsson says: ==================== net: xdp: execute xdp_do_flush() before napi_complete_done() Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found in [1]. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in [2]. The drivers have only been compile-tested since I do not own any of the HW below. So if you are a maintainer, it would be great if you could take a quick look to make sure I did not mess something up. Note that these were the drivers I found that violated the ordering by running a simple script and manually checking the ones that came up as potential offenders. But the script was not perfect in any way. There might still be offenders out there, since the script can generate false negatives. [1] https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com [2] https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ ==================== Link: https://lore.kernel.org/r/20230125074901.2737-1-magnus.karlsson@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: d678be1d ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: a1e031ff ("dpaa_eth: add XDP_REDIRECT support") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Acked-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: a825b611 ("net: lan966x: Add support for XDP_REDIRECT") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: d1b25b79 ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Michal Wilczynski authored
Current link for NAPI documentation in ice driver doesn't work - it returns 404. Update the link to the working one. Signed-off-by:
Michal Wilczynski <michal.wilczynski@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-