- Mar 08, 2014
-
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "In the past, I've had lots of reports about trace events not working. Developers would say they put a trace_printk() before and after the trace event but when they enable it (and the trace event said it was enabled) they would see the trace_printks but not the trace event. I was not able to reproduce this, but that's because I wasn't looking at the right location. Recently, another bug came up that showed the issue. If your kernel supports signed modules but allows for non-signed modules to be loaded, then when one is, the kernel will silently set the MODULE_FORCED taint on the module. Although, this taint happens without the need for insmod --force or anything of the kind, it labels the module with that taint anyway. If this tainted module has tracepoints, the tracepoints will be ignored because of the MODULE_FORCED taint. But no error message will be displayed. Worse yet, the event infrastructure will still be created letting users enable the trace event represented by the tracepoint, although that event will never actually be enabled. This is because the tracepoint infrastructure allows for non-existing tracepoints to be enabled for new modules to arrive and have their tracepoints set. Although there are several things wrong with the above, this change only addresses the creation of the trace event files for tracepoints that are not created when a module is loaded and is tainted. This change will print an error message about the module being tainted and not the trace events will not be created, and it does not create the trace event infrastructure" * tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not add event files for modules that fail tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: - a bugfix for a long standing waitqueue race - a trivial fix for a missing include * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Include missing header file in irqdomain.c genirq: Remove racy waitqueue_active check
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - dm-cache memory allocation failure fix - fix DM's Kconfig identation - dm-snapshot metadata corruption fix for bug introduced in 3.14-rc1 - important refcount < 0 fix for the DM persistent data library's space map metadata interface which fixes corruption reported by a few dm-thinp users and last but not least: - more extensive fixes than ideal for dm-thinp's data resize capability (which has had growing pain much like we've seen from -ENOSPC handling of filesystems that mature). The end result is dm-thinp now handles metadata operation failure and no data space error conditions much better than before. * tag 'dm-3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm space map metadata: fix refcount decrement below 0 which caused corruption dm thin: fix Documentation for held metadata root feature dm thin: fix noflush suspend IO queueing dm thin: fix deadlock in __requeue_bio_list dm thin: fix out of data space handling dm thin: ensure user takes action to validate data and metadata consistency dm thin: synchronize the pool mode during suspend dm snapshot: fix metadata corruption dm: fix Kconfig indentation dm cache mq: fix memory allocation failure for large cache devices
-
Vineet Gupta authored
This fixes a subtle issue with cache flush which could potentially cause random userspace crashes because of stale icache lines. This error crept in when consolidating the cache flush code Fixes: bd12976c (ARC: cacheflush refactor #3: Unify the {d,i}cache) Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 3.13 Cc: arc-linux-dev@synopsys.com Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Just a few device-specific quirks for HD-audio and USB-audio, most of which are one-liners" * tag 'sound-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for Logitech Webcam C500 ALSA: hda - Use analog beep for Thinkpads with AD1984 codecs ALSA: hda - Add missing loopback merge path for AD1884/1984 codecs ALSA: hda - add automute fix for another dell AIO model ALSA: hda - Added inverted digital-mic handling for Acer TravelMate 8371
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Mostly intel and radeon fixes, one tda998x, one kconfig dep fix and two more MAINTAINERS updates, All pretty run of the mill for this stage" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/atom: select the proper number of lanes in transmitter setup MAINTAINERS: add maintainer entry for TDA998x driver drm: fix bochs kconfig dependencies drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters drm/radeon/cik: fix typo in documentation drm/radeon: silence GCC warning on 32 bit drm/radeon: resume old pm late drm/radeon: TTM must be init with cpu-visible VRAM, v2 DRM: armada: fix use of kfifo_put() drm/i915: Reject >165MHz modes w/ DVI monitors drm/i915: fix assert_cursor on BDW drm/i915: vlv: reserve GT power context early drm/i915: fix pch pci device enumeration drm/i915: Resolving the memory region conflict for Stolen area drm/i915: use backlight legacy combination mode also for i915gm/i945gm MAINTAINERS: update AGP tree to point at drm tree
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Small collection of fixes for 3.14-rc. It contains: - Three minor update to blk-mq from Christoph. - Reduce number of unaligned (< 4kb) in-flight writes on mtip32xx to two. From Micron. - Make the blk-mq CPU notify spinlock raw, since it can't be a sleeper spinlock on RT. From Mike Galbraith. - Drop now bogus BUG_ON() for bio iteration with blk integrity. From Nic Bellinger. - Properly propagate the SYNC flag on requests. From Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: add REQ_SYNC early rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock bio-integrity: Drop bio_integrity_verify BUG_ON in post bip->bip_iter world blk-mq: support partial I/O completions blk-mq: merge blk_mq_insert_request and blk_mq_run_request blk-mq: remove blk_mq_alloc_rq mtip32xx: Reduce the number of unaligned writes to 2
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "This is a set of pin control fixes I have collected over the last few days. Some have rotated more than others in linux-next, but they were rebased on v3.14-rc5 due to sloppy commit messages. I am quite convinced that they are all good fixes that only hit this or that individual driver and not the entire subsystem. - Fix chained interrupts, interrupt masking and register offset calculation for the sunxi driver - Make MSM a bool rather than a tristate to stop build problems to happen - chained interrupt controllers cannot currently be defined in modules - Fix a clock in the PFC driver - Fix a kernel panic in the sirf driver" * tag 'pinctrl-v3.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sirf: fix kernel panic in gpio_lock_as_irq pinctrl: sh-pfc: r8a7791: SD1_CLK fix pinctrl: msm: make PINCTRL_MSM bool instead of tristate pinctrl: sunxi: Fix interrupt register offset calculation pinctrl: sunxi: Fix masking when setting irq type pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull Xen fix from Konrad Rzeszutek Wilk: "This has exactly one patch for Xen ARM. It sets the dependency to compile the kernel with MMU enabled - otherwise - the guest won't work very well" * tag 'stable/for-linus-3.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: ARM: XEN depends on having a MMU
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
Pull c6x build fix from Mark Salter: "Build fix for c6x" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: fix build failure caused by cache.h
-
Joe Thornber authored
This has been a relatively long-standing issue that wasn't nailed down until Teng-Feng Yang's meticulous bug report to dm-devel on 3/7/2014, see: http://www.redhat.com/archives/dm-devel/2014-March/msg00021.html From that report: "When decreasing the reference count of a metadata block with its reference count equals 3, we will call dm_btree_remove() to remove this enrty from the B+tree which keeps the reference count info in metadata device. The B+tree will try to rebalance the entry of the child nodes in each node it traversed, and the rebalance process contains the following steps. (1) Finding the corresponding children in current node (shadow_current(s)) (2) Shadow the children block (issue BOP_INC) (3) redistribute keys among children, and free children if necessary (issue BOP_DEC) Since the update of a metadata block's reference count could be recursive, we will stash these reference count update operations in smm->uncommitted and then process them in a FILO fashion. The problem is that step(3) could free the children which is created in step(2), so the BOP_DEC issued in step(3) will be carried out before the BOP_INC issued in step(2) since these BOPs will be processed in FILO fashion. Once the BOP_DEC from step(3) tries to decrease the reference count of newly shadow block, it will report failure for its reference equals 0 before decreasing. It looks like we can solve this issue by processing these BOPs in a FIFO fashion instead of FILO." Commit 5b564d80 ("dm space map: disallow decrementing a reference count below zero") changed the code to report an error for this temporary refcount decrement below zero. So what was previously a harmless invalid refcount became a hard failure due to the new error path: device-mapper: space map common: unable to decrement a reference count below 0 device-mapper: thin: 253:6: dm_thin_insert_block() failed: error = -22 device-mapper: thin: 253:6: switching pool to read-only mode This bug is in dm persistent-data code that is common to the DM thin and cache targets. So any users of those targets should apply this fix. Fix this by applying recursive space map operations in FIFO order rather than FILO. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=68801 Reported-by:
Apollon Oikonomopoulos <apoikos@debian.org> Reported-by:
<edwillam1007@gmail.com> Reported-by:
Teng-Feng Yang <shinrairis@gmail.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.13+
-
- Mar 07, 2014
-
-
Shaohua Li authored
Add REQ_SYNC early, so rq_dispatched[] in blk_mq_rq_ctx_init is set correctly. Signed-off-by:
Shaohua <Li<shli@fusionio.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
one more radeon fix. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/atom: select the proper number of lanes in transmitter setup
-
Alex Deucher authored
We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223 Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Russell King authored
Add a maintainers entry for the TDA998x driver. Rob Clark has handed this driver over to me to look after. Acked-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Gerd Hoffmann authored
Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie authored
fix for kfifo api change. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: DRM: armada: fix use of kfifo_put()
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
a few more radeon fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: fix typo in EVERGREEN_SMC_FIRMWARE_HEADER_softRegisters drm/radeon/cik: fix typo in documentation drm/radeon: silence GCC warning on 32 bit drm/radeon: resume old pm late drm/radeon: TTM must be init with cpu-visible VRAM, v2
-
Alex Deucher authored
Should be at 0x8 rather than 0. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60523 Noticed by ArtForz on #radeon Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
Copy-paste typo. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Paul Bolle authored
Building radeon_ttm.o on 32 bit x86 triggers a warning: In file included from include/asm-generic/bug.h:13:0, from [...]/arch/x86/include/asm/bug.h:38, from include/linux/bug.h:4, from include/drm/drm_mm.h:39, from include/drm/drm_vma_manager.h:26, from include/drm/ttm/ttm_bo_api.h:35, from drivers/gpu/drm/radeon/radeon_ttm.c:32: drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_gtt_read': include/linux/kernel.h:712:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&_min1 == &_min2); \ ^ drivers/gpu/drm/radeon/radeon_ttm.c:938:22: note: in expansion of macro 'min' ssize_t cur_size = min(size, PAGE_SIZE - off); ^ Silence this warning by using min_t(). Since cur_size will never be negative and its upper bound is PAGE_SIZE, we can change its type to size_t and use min_t(size_t, [...]) here. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com>
-
Alex Deucher authored
Moving the pm resume up in the init order to fix dpm seems to have regressed somes cases with the old pm code. Move it back to late resume. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Lauri Kasanen authored
Without this, a bo may get created in the cpu-inaccessible vram. Before the CP engines get setup, all copies are done via cpu memcpy. This means that the cpu tries to read from inaccessible memory, fails, and the radeon module proceeds to disable acceleration. Doing this has no downsides, as the real VRAM size gets set as soon as the CP engines get init. This is a candidate for 3.14 fixes. v2: Add comment on why the function is used Signed-off-by:
Lauri Kasanen <cand@gmx.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
Mike Snitzer authored
The Documentation for the thin provisioning target's held metadata root feature was incorrect. It is now available and the value for the held metadata root is in block units (not 512b sectors). Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
- Mar 06, 2014
-
-
Joe Thornber authored
i) by the time DM core calls the postsuspend hook the dm_noflush flag has been cleared. So the old thin_postsuspend did nothing. We need to use the presuspend hook instead. ii) There was a race between bios leaving DM core and arriving in the deferred queue. thin_presuspend now sets a 'requeue' flag causing all bios destined for that thin to be requeued back to DM core. Then it requeues all held IO, and all IO on the deferred queue (destined for that thin). Finally postsuspend clears the 'requeue' flag. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Joe Thornber authored
The spin lock in requeue_io() was held for too long, allowing deadlock. Don't worry, due to other issues addressed in the following "dm thin: fix noflush suspend IO queueing" commit, this code was never called. Fix this by taking the spin lock for a much shorter period of time. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Joe Thornber authored
Ideally a thin pool would never run out of data space; the low water mark would trigger userland to extend the pool before we completely run out of space. However, many small random IOs to unprovisioned space can consume data space at an alarming rate. Adjust your low water mark if you're frequently seeing "out-of-data-space" mode. Before this fix, if data space ran out the pool would be put in PM_READ_ONLY mode which also aborted the pool's current metadata transaction (data loss for any changes in the transaction). This had a side-effect of needlessly compromising data consistency. And retry of queued unserviceable bios, once the data pool was resized, could initiate changes to potentially inconsistent pool metadata. Now when the pool's data space is exhausted transition to a new pool mode (PM_OUT_OF_DATA_SPACE) that allows metadata to be changed but data may not be allocated. This allows users to remove thin volumes or discard data to recover data space. The pool is no longer put in PM_READ_ONLY mode in response to the pool running out of data space. And PM_READ_ONLY mode no longer aborts the pool's current metadata transaction. Also, set_pool_mode() will now notify userspace when the pool mode is changed. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com>
-
Mike Snitzer authored
If a thin metadata operation fails the current transaction will abort, whereby causing potential for IO layers up the stack (e.g. filesystems) to have data loss. As such, set THIN_METADATA_NEEDS_CHECK_FLAG in the thin metadata's superblock which: 1) requires the user verify the thin metadata is consistent (e.g. use thin_check, etc) 2) suggests the user verify the thin data is consistent (e.g. use fsck) The only way to clear the superblock's THIN_METADATA_NEEDS_CHECK_FLAG is to run thin_repair. On metadata operation failure: abort current metadata transaction, set pool in read-only mode, and now set the needs_check flag. As part of this change, constraints are introduced or relaxed: * don't allow a pool to transition to write mode if needs_check is set * don't allow data or metadata space to be resized if needs_check is set * if a thin pool's metadata space is exhausted: the kernel will now force the user to take the pool offline for repair before the kernel will allow the metadata space to be extended. Also, update Documentation to include information about when the thin provisioning target commits metadata, how it handles metadata failures and running out of space. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Joe Thornber <ejt@redhat.com>
-
- Mar 05, 2014
-
-
Takashi Iwai authored
Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
For making the driver behavior compatible with the earlier kernels, use the analog beep in the loopback path instead of the digital beep. Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't connected directly to the actual I/O paths but only via another mixer widget (NID 0x21). We need a similar fix as we did for AD1882. Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Barry Song authored
commit 655dada6 causes kernel panic, this patch fixes it. [ 1.197816] [ffffffee] *pgd=0d7fd821, *pte=00000000, *ppte=00000000 [ 1.204070] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 1.209447] Modules linked in: [ 1.212490] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1 #3 [ 1.218737] task: cd03c000 ti: cd040000 task.ti: cd040000 [ 1.224127] PC is at gpiod_lock_as_irq+0xc/0x64 [ 1.228634] LR is at sirfsoc_gpio_irq_startup+0x18/0x44 [ 1.233842] pc : [<c01d3990>] lr : [<c01d1c38>] psr: a0000193 [ 1.233842] sp : cd041d30 ip : 00000000 fp : 00000000 [ 1.245296] r10: 00000000 r9 : cd023db4 r8 : 60000113 [ 1.250505] r7 : 0000003e r6 : cd023dd4 r5 : c06bfa54 r4 : cd023d80 [ 1.257014] r3 : 00000020 r2 : 00000000 r1 : ffffffea r0 : ffffffea [ 1.263526] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.270903] Control: 10c53c7d Table: 00004059 DAC: 00000015 [ 1.276631] Process swapper/0 (pid: 1, stack limit = 0xcd040240) [ 1.282620] Stack: (0xcd041d30 to 0xcd042000) [ 1.286963] 1d20: cd023d80 c01d1c38 c01d1c20 cd023d80 [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.286963] 1d20: cd023d80 c01d1c38 c01d1c20 cd023d80 [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.295124] 1d40: 00000001 c0068438 cd023d80 ccb6d880 cd023dd4 c0067044 0000718e c006719c [ 1.303283] 1d60: 00000800 00000083 ccb6d880 cd023d80 c02b41d8 00000083 0000003e ccb7c410 [ 1.311442] 1d80: 00000000 c00671dc 00000083 0000003e c02b41d8 cd3dd5c0 0000003e ccb7c634 [ 1.319601] 1da0: cd040030 c00672a8 cd3dd5c0 ccb7c410 ccb6d340 ccb7c410 ccb6d340 cd3dd400 [ 1.327760] 1dc0: cd3dd410 c02b4434 ccb7c410 c01265a8 00000001 cd3dd410 c0687108 00000000 [ 1.335919] 1de0: c0687108 00000000 00000000 c0240170 c0240158 cd3dd410 c06c30d0 c023e8bc [ 1.344079] 1e00: c023e9d4 00000000 cd3dd410 c023e9d4 c0682150 c023cf88 cd003e98 cd2d50c4 [ 1.352238] 1e20: cd3dd410 cd3dd444 c06822f0 c023e768 cd3dd418 cd3dd410 c06822f0 c023de14 [ 1.360397] 1e40: cd3dd418 00000000 cd3dd410 c023c398 cd041e78 cd041ea8 cd3dd400 cd3dd410 [ 1.368556] 1e60: 00000083 00000000 cd3dd400 cd3dd410 00000083 000000c8 c04e00c8 c023fee8 [ 1.376715] 1e80: 00000000 cd041ea8 cd3dd400 00000001 00000083 c024048c c0435ef8 c0434dec [ 1.384874] 1ea0: c068da58 c04c6d04 c0682150 c0435ef8 ffffffff 00000000 00000000 c068da58 [ 1.393033] 1ec0: 00000020 00000000 00000000 00000000 c05dabb8 00000007 c068d640 c068d640 [ 1.401193] 1ee0: c04c247c c04c249c 00000000 c00088e8 cd004c00 c043bbb8 cd029180 c03812a0 [ 1.409352] 1f00: 00000000 00000000 60000113 c0673728 60000113 c0673728 00000000 00000000 [ 1.417511] 1f20: cd7fce01 c0390a54 00000065 c003a81c c049e8bc 00000007 cd7fce0e 00000007 [ 1.425670] 1f40: 00000000 c05dabb8 00000007 c068d640 c068d640 c04c050c c04e00c8 00000065 [ 1.433829] 1f60: c04e00c0 c04c0c54 00000007 00000007 c04c050c c037d8fc cd03c000 c004322c [ 1.441988] 1f80: c0662b40 0000d640 c03737c0 00000000 00000000 00000000 00000000 00000000 [ 1.450147] 1fa0: 00000000 c03737cc 00000000 c000e478 00000000 00000000 00000000 00000000 [ 1.458307] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.466467] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 0002d481 05014092 [ 1.474640] [<c01d3990>] (gpiod_lock_as_irq) from [<c01d1c38>] (sirfsoc_gpio_irq_startup+0x18/0x44) [ 1.483661] [<c01d1c38>] (sirfsoc_gpio_irq_startup) from [<c0068438>] (irq_startup+0x34/0x6c) [ 1.492163] [<c0068438>] (irq_startup) from [<c0067044>] (__setup_irq+0x450/0x4b8) [ 1.499714] [<c0067044>] (__setup_irq) from [<c00671dc>] (request_threaded_irq+0xa8/0x128) [ 1.507960] [<c00671dc>] (request_threaded_irq) from [<c00672a8>] (request_any_context_irq+0x4c/0x7c) [ 1.517164] [<c00672a8>] (request_any_context_irq) from [<c02b4434>] (gpio_extcon_probe+0x144/0x1d4) [ 1.526279] [<c02b4434>] (gpio_extcon_probe) from [<c0240170>] (platform_drv_probe+0x18/0x48) [ 1.534783] [<c0240170>] (platform_drv_probe) from [<c023e8bc>] (driver_probe_device+0x120/0x238) [ 1.543641] [<c023e8bc>] (driver_probe_device) from [<c023cf88>] (bus_for_each_drv+0x58/0x8c) [ 1.552143] [<c023cf88>] (bus_for_each_drv) from [<c023e768>] (device_attach+0x74/0x88) [ 1.560126] [<c023e768>] (device_attach) from [<c023de14>] (bus_probe_device+0x84/0xa8) [ 1.568113] [<c023de14>] (bus_probe_device) from [<c023c398>] (device_add+0x440/0x520) [ 1.576012] [<c023c398>] (device_add) from [<c023fee8>] (platform_device_add+0xb4/0x214) [ 1.584084] [<c023fee8>] (platform_device_add) from [<c024048c>] (platform_device_register_full+0xb8/0xdc) [ 1.593719] [<c024048c>] (platform_device_register_full) from [<c04c6d04>] (sirfsoc_init_late+0xec/0xf4) [ 1.603185] [<c04c6d04>] (sirfsoc_init_late) from [<c04c249c>] (init_machine_late+0x20/0x28) [ 1.611603] [<c04c249c>] (init_machine_late) from [<c00088e8>] (do_one_initcall+0xf8/0x144) [ 1.619934] [<c00088e8>] (do_one_initcall) from [<c04c0c54>] (kernel_init_freeable+0x13c/0x1dc) [ 1.628620] [<c04c0c54>] (kernel_init_freeable) from [<c03737cc>] (kernel_init+0xc/0x118) Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
ssh://git.freedesktop.org/git/drm-intelDave Airlie authored
Small fixes all around, mostly stable material. Please pull. * tag 'drm-intel-fixes-2014-03-04' of ssh://git.freedesktop.org/git/drm-intel: drm/i915: Reject >165MHz modes w/ DVI monitors drm/i915: fix assert_cursor on BDW drm/i915: vlv: reserve GT power context early drm/i915: fix pch pci device enumeration drm/i915: Resolving the memory region conflict for Stolen area drm/i915: use backlight legacy combination mode also for i915gm/i945gm
-
Magnus Damm authored
Fix the SD1_CLK handling for r8a7791. Without this patch it is impossible to request all pins needed for SDHI1 on the Koelsch board. Signed-off-by:
Magnus Damm <damm@opensource.se> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Josh Cartwright authored
Modular builds of pinctrl-msm break due to handle_bad_irq being unexported for module use. For now, make PINCTRL_MSM 'bool'. Signed-off-by:
Josh Cartwright <joshc@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Hans de Goede authored
This fixing setting the interrupt type for eints >= 8. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Chen-Yu Tsai authored
On tha Allwinner A20 SoC, the external interrupts on the pin controller device are connected to the GIC. Without chained_irq_{enter, exit}, external GPIO interrupts, such as used by mmc core card detect, cause the system to hang. This issue was first encountered during my attempt to get out-of-band interrupts for WiFi on the Cubietruck working. With David's new series of sunci-mci using mmc slot-gpio for (GPIO interrupt based) card detection, removing the SD card also causes my Cubietruck to hang. This problem should extend to all Allwinner A20 based boards. With this fix, the system no longer hangs when I remove or insert the SD card. /proc/interrupts show that the interrupt has correctly fired. However the system still does not detect card removal/insertion. I believe this is another unrelated issue. Cc: stable@vger.kernel.org Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Mark Salter authored
A patch to linux/irqflags.h uncovered a problem with c6x asm/cache.h which causes a build failure: /arch/c6x/include/asm/cache.h:63:20: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘c6x_cache_init’ extern void __init c6x_cache_init(void); The asm/cache.h was relying on linux/irqflags.h to pull in linux/init.h but the recent patch changed that. The c6x header should have included linux/init.h all along. Signed-off-by:
Mark Salter <msalter@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in ieee80211_prep_connection(), sta_info leaked on error. From Eytan Lifshitz. 2) Unintentional switch case fallthrough in nft_reject_inet_eval(), from Patrick McHardy. 3) Must check if payload lenth is a power of 2 in nft_payload_select_ops(), from Nikolay Aleksandrov. 4) Fix mis-checksumming in xen-netfront driver, ip_hdr() is not in the correct place when we invoke skb_checksum_setup(). From Wei Liu. 5) TUN driver should not advertise HW vlan offload features in vlan_features. Fix from Fernando Luis Vazquez Cao. 6) IPV6_VTI needs to select NET_IPV_TUNNEL to avoid build errors, fix from Steffen Klassert. 7) Add missing locking in xfrm_migrade_state_find(), we must hold the per-namespace xfrm_state_lock while traversing the lists. Fix from Steffen Klassert. 8) Missing locking in ath9k driver, access to tid->sched must be done under ath_txq_lock(). Fix from Stanislaw Gruszka. 9) Fix two bugs in TCP fastopen. First respect the size argument given to tcp_sendmsg() in the fastopen path, and secondly prevent tcp_send_syn_data() from potentially using order-5 allocations. From Eric Dumazet. 10) Fix handling of default neigh garbage collection params, from Jiri Pirko. 11) Fix cwnd bloat and over-inflation of RTT when transmit segmentation is in use. From Eric Dumazet. 12) Missing initialization of Realtek r8169 driver's statistics seqlocks. Fix from Kyle McMartin. 13) Fix RTNL assertion failures in 802.3ad and AB ARP monitor of bonding driver, from Ding Tianhong. 14) Bonding slave release race can cause divide by zero, fix from Nikolay Aleksandrov. 15) Overzealous return from neigh_periodic_work() causes reachability time to not be computed. Fix from Duain Jiong. 16) Fix regression in ipv6_find_hdr(), it should not return -ENOENT when a specific target is specified and found. From Hans Schillstrom. 17) Fix VLAN tag stripping regression in BNA driver, from Ivan Vecera. 18) Tail loss probe can calculate bogus RTTs due to missing packet marking on retransmit. Fix from Yuchung Cheng. 19) We cannot do skb_dst_drop() in iptunnel_pull_header() because multicast loopback detection in later code paths need access to skb_rtable(). Fix from Xin Long. 20) The macvlan driver regresses in that it propagates lower device offload support disables into itself, causing severe slowdowns when running over a bridge. Provide the software offloads always on macvlan devices to deal with this and the regression is gone. From Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits) macvlan: Add support for 'always_on' offload features net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer net: cpsw: fix cpdma rx descriptor leak on down interface be2net: isolate TX workarounds not applicable to Skyhawk-R be2net: Fix skb double free in be_xmit_wrokarounds() failure path be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode be2net: Fix to reset transparent vlan tagging qlcnic: dcb: a couple off by one bugs tcp: fix bogus RTT on special retransmission hsr: off by one sanity check in hsr_register_frame_in() can: remove CAN FD compatibility for CAN 2.0 sockets can: flexcan: factor out soft reset into seperate funtion can: flexcan: flexcan_remove(): add missing netif_napi_del() can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze can: flexcan: factor out transceiver {en,dis}able into seperate functions can: flexcan: fix transition from and to low power mode in chip_{en,dis}able can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails can: flexcan: fix shutdown: first disable chip, then all interrupts USB AX88179/178A: Support D-Link DUB-1312 ...
-