Allow to create an RQ which is not registered as an XDP RQ. For example:
the trap-RQ doesn't register as an XDP RQ.

Fixes: 869c5f92

 ("net/mlx5e: Generalize open RQ")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There should be no spaces at the start of the line.

Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

void function return statements are not generally useful.

Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

There should be a blank lines after declarations.

Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT
is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended
to be a bit-flag. Fix this by using the == operator as was originally
intended.

Addresses-Coverity: ("Logically dead code")
Fixes: 7dfee4b1

 ("net/mlx5: IPsec, Refactor SA handle creation and destruction")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cmd size is 8K so use kvzalloc().

Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5dr_action is a generally used data structure, and there is an
union for different types of actions in it. The size of mlx5dr_action
is about 72 bytes, but for those actions with fewer fields, most of
the allocated memory is wasted.
Remove this union, and mlx5dr_action becomes a generic action header.
Then actions are dynamically allocated with needed memory, the data
for each action is stored right after the header.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SF's hardware function id is already stored in mlx5_sf. Reuse it,
instead of querying the hw table.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

At many places in the code, device pointer is directly available. Make
use of it, instead of accessing it from the table.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently eswitch flow steering (FS) namespace of vport's ingress and
egress ACL are enabled when FS layer is initialized. This is done even
when eswitch is diabled. This demands that total eswitch ports to be
known to FS layer without eswitch in use.

Given the FS core is not dependent on eswitch, make namespace init and
cleanup routines as helper routines to be invoked only when eswitch is
needed.

With this change, ingress and egress ACL namespaces are created only
when eswitch legacy/offloads mode is enabled.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently eswitch offers two modes. Legacy and offloads.
Offloads code is already in its own file eswitch_offloads.c

However eswitch.c contains the eswitch legacy code and common
infrastructure  code.

To enable future extensions and to better manage generic common eswitch
infrastructure code, move the legacy code to its own legacy.c file.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Convert ESW_ALLOWED macro to a helper routine so that it can be used in
other eswitch files.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Make cleanup sequence mirror of init sequence for cleaning up reps
and freeing vports.

Also when reps initialization fails, there is no need to perform reps
cleanup.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Vport number is 16-bit field in hardware. Make it u16.

Move location of vport in the structure so that it reduces a hole
in the structure.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

With vhca events, SF state is queried through the VHCA events. Device no
longer expects SF bitmap in the query eswitch functions command.

Hence, remove it to simplify the code.

Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently each packet inserted in eswitch is tagged with a internal
metadata to indicate source vport. Metadata tagging is not always
needed. Metadata insertion is needed for multi-port RoCE, failover
between representors and stacked devices. In many other cases,
metadata enablement is not needed.

Metadata insertion slows down the packet processing rate of the E-switch
when it is in switchdev mode.

Below table show performance gain with metadata disabled for VXLAN
offload rules in both SMFS and DMFS steering mode on ConnectX-5 device.

----------------------------------------------
| steering | metadata | pkt size | rx pps    |
| mode     |          |          | (million) |
----------------------------------------------
| smfs     | disabled | 128Bytes | 42        |
----------------------------------------------
| smfs     | enabled  | 128Bytes | 36        |
----------------------------------------------
| dmfs     | disabled | 128Bytes | 42        |
----------------------------------------------
| dmfs     | enabled  | 128Bytes | 36        |
----------------------------------------------

Hence, allow user to disable metadata using driver specific devlink
parameter. Metadata setting of the eswitch is applicable only for the
switchdev mode.

Example to show and disable metadata before changing eswitch mode:
$ devlink dev param show pci/0000:06:00.0 name esw_port_metadata
pci/0000:06:00.0:
  name esw_port_metadata type driver-specific
    values:
      cmode runtime value true

$ devlink dev param set pci/0000:06:00.0 \
	  name esw_port_metadata value false cmode runtime

$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev

Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
changelog:
v1->v2:
 - added performance numbers in commit log
 - updated commit log and documentation for switchdev mode
 - added explicit note on when user can disable metadata in
   documentation

For devices that use a programmable clock for the AVB reference clock,
the driver may need to enable them.  Add code to find the optional clock
and enable it when available.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The AVB driver assumes there is an external crystal, but it could
be clocked by other means.  In order to enable a programmable
clock, it needs to be added to the clocks list and enabled in the
driver.  Since there currently only one clock, there is no
clock-names list either.

Update bindings to add the additional optional clock, and explicitly
name both of them.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yangbo Lu says:

====================
enetc: support PTP Sync packet one-step timestamping

This patch-set is to add support for PTP Sync packet one-step timestamping.
Since ENETC single-step register has to be configured dynamically per
packet for correctionField offeset and UDP checksum update, current
one-step timestamping packet has to be sent only when the last one
completes transmitting on hardware. So, on the TX, this patch handles
one-step timestamping packet as below:

- Trasmit packet immediately if no other one in transfer, or queue to
  skb queue if there is already one in transfer.
  The test_and_set_bit_lock() is used here to lock and check state.
- Start a work when complete transfer on hardware, to release the bit
  lock and to send one skb in skb queue if has.

Changes for v2:
	- Rebased.
	- Fixed issues from patchwork checks.
	- netif_tx_lock for one-step timestamping packet sending.
Changes for v3:
	- Used system workqueue.
	- Set bit lock when transmitted one-step packet, and scheduled
	  work when completed. The worker cleared the bit lock, and
	  transmitted one skb in skb queue if has, instead of a loop.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to add support for PTP Sync packet one-step timestamping.
Since ENETC single-step register has to be configured dynamically per
packet for correctionField offeset and UDP checksum update, current
one-step timestamping packet has to be sent only when the last one
completes transmitting on hardware. So, on the TX, this patch handles
one-step timestamping packet as below:

- Trasmit packet immediately if no other one in transfer, or queue to
  skb queue if there is already one in transfer.
  The test_and_set_bit_lock() is used here to lock and check state.
- Start a work when complete transfer on hardware, to release the bit
  lock and to send one skb in skb queue if has.

And the configuration for one-step timestamping on ENETC before
transmitting is,

- Set one-step timestamping flag in extension BD.
- Write 30 bits current timestamp in tstamp field of extension BD.
- Update PTP Sync packet originTimestamp field with current timestamp.
- Configure single-step register for correctionField offeset and UDP
  checksum update.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mark TX timestamp type per skb on skb->cb[0], instead of
global variable for all skbs. This is a preparation for
one step timestamp support.

For one-step timestamping enablement, there will be both
one-step and two-step PTP messages to transfer. And a skb
queue is needed for one-step PTP messages making sure
start to send current message only after the last one
completed on hardware. (ENETC single-step register has to
be dynamically configured per message.) So, marking TX
timestamp type per skb is required.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lijun Pan says:

====================
ibmvnic: improve error printing

Patch 1 prints reset reason as a string.
Patch 2 prints adapter state as a string.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The adapter state can be added or deleted over different versions
of the source code. Print a string instead of a number.

Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reset reason can be added or deleted over different versions
of the source code. Print a string instead of a number.

Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e704f043

 ("ibmvnic: Remove debugfs support") did not
clean up everything. Remove the remaining code.

Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jonathon Reinhart says:

====================
Ensuring net sysctl isolation

This patchset is the result of an audit of /proc/sys/net to prove that
it is safe to be mouted read-write in a container when a net namespace
is in use. See [1].

The first commit adds code to detect sysctls which are not netns-safe,
and can "leak" changes to other net namespaces.

My manual audit found, and the above feature confirmed, that there are
two nf_conntrack sysctls which are in fact not netns-safe.

I considered sending the latter to netfilter-devel, but I think it's
better to have both together on net-next: Adding only the former causes
undesirable warnings in the kernel log.

[1]: https://github.com/opencontainers/runc/issues/2826


====================

Signed-off-by: David S. Miller <davem@davemloft.net>

These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)

Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.

The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).

Commit d0febd81 ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.

Fixes: d0febd81

 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds an ensure_safe_net_sysctl() check during register_net_sysctl()
to validate that sysctl table entries for a non-init_net netns are
sufficiently isolated. To be netns-safe, an entry must adhere to at
least (and usually exactly) one of these rules:

1. It is marked read-only inside the netns.
2. Its data pointer does not point to kernel/module global data.

An entry which fails both of these checks is indicative of a bug,
whereby a child netns can affect global net sysctl values.

If such an entry is found, this code will issue a warning to the kernel
log, and force the entry to be read-only to prevent a leak.

To test, simply create a new netns:

    $ sudo ip netns add dummy

As it sits now, this patch will WARN for two sysctls which will be
addressed in a subsequent patch:
- /proc/sys/net/netfilter/nf_conntrack_max
- /proc/sys/net/netfilter/nf_conntrack_expect_max

Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In many places,first assign a value to a variable and then return
the variable. which is redundant, we should directly return the value.
in pn533_rf_field funciton,return rc also in the if statement, so we
use return 0 to replace the last return rc.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Error recovery fixes.

This series adds some fixes and enhancements to the error recovery
logic.  The health register logic is improved and we also add missing
code to free and re-create VF representors in the firmware after
error recovery.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

During firmware recovery, VF-Rep configuration in the firmware is lost.
Fix it by freeing and (re)allocating VF-Reps in FW at relevant points
during the error recovery process.

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new helper function __bnxt_free_one_vf_rep() to free one VF rep.
We also reintialize the VF rep fields to proper initial values so that
the function can be used without freeing the VF rep data structure.  This
will be used in subsequent patches to free and recreate VF reps after
error recovery.

Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new function bnxt_alloc_vf_rep() to allocate a VF representor.
This function will be needed in subsequent patches to recreate the
VF reps after error recovery.

Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After probe is successful, interface may not be bought up in all
the cases and health register mapping could be invalid if firmware
undergoes reset. Fix it by invalidating the health register at the
end of probe. It will be remapped during ifup.

Fixes: 43a440c4

 ("bnxt_en: Improve the status_reliable flag in bp->fw_health.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The retry loop in bnxt_try_recover_fw() should not abort when the
health register value is 0.  It is a valid value that indicates the
firmware is booting up.

Fixes: 861aae78

 ("bnxt_en: Enhance retry of the first message to the firmware.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a comment spelling mistake "interfarence" -> "interference" in
function parse_nla_action(). Fix it.

Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reset_prepare and reset_done calls have a null pointer check
on ae_dev however ae_dev is being dereferenced via the call to
ns3_is_phys_func with the ae->pdev argument. Fix this by performing
a null pointer check on ae_dev and hence short-circuiting the
dereference to ae_dev on the call to ns3_is_phys_func.

Addresses-Coverity: ("Dereference before null check")
Fixes: 715c58e9

 ("net: hns3: add suspend and resume pm_ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 4863dea3

 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The shifting of the u8 integers f->fs.nat_lip[] by 24 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that the top bit of the u8
is set then all then all the upper 32 bits of the u64 end up as
also being set because of the sign-extension. Fix this by
casting the u8 values to a u64 before the 24 bit left shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 12b276fb

 ("cxgb4: add support to create hash filters")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: support two more platforms

This series adds IPA support for two more Qualcomm SoCs.

The first patch updates the DT binding to add compatible strings.

The second temporarily disables checksum offload support for IPA
version 4.5 and above.  Changes are required to the RMNet driver
to support the "inline" checksum offload used for IPA v4.5+, and
once those are present this capability will be enabled for IPA.

The third and fourth patches add configuration data for IPA versions
4.5 (used for the SDX55 SoC) and 4.11 (used for the SD7280 SoC).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>