When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.

Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:

   [ bytenr 13893632, offset 64Kb, len 64Kb  ]
   0                                         64Kb

   [ bytenr 13631488, offset 64Kb, len 192Kb ]
   64Kb                                      256Kb

   [ bytenr 13893632, offset 0, len 256Kb    ]
   256Kb                                     512Kb

When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 +
64Kb + 64Kb, respectively.

Later when processing the extent item at offset 256K, we log the checksums
for the range from 13893632 to 14155776 (which corresponds to 13893632 +
256Kb). These checksums get merged with the checksum item for the range
from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:

   (...)
   item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512
           range start 13631488 end 14155776 length 524288
   item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64
           range start 13959168 end 14024704 length 65536

The first one covers the range from the second one, they overlap.

So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent 13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr 13893632 leaves us
at the first checksum item, which covers the whole range of the extent.

However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb.

After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:

   [ bytenr 13893632, offset 64K, len 64Kb   ]
   0                                         64Kb

   [ bytenr 13631488, offset 64Kb, len 192Kb ]
   64Kb                                      256Kb

   [ bytenr 14155776, offset 0, len 64Kb     ]
   256Kb                                     320Kb

   [ bytenr 13893632, offset 64Kb, len 192Kb ]
   320Kb                                     512Kb

After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:

1) When replaying the file extent item for file offset 320Kb, we
   lookup for the checksums for the extent range from 13959168
   (13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call
   to btrfs_lookup_csums_range();

2) btrfs_lookup_csums_range() finds the checksum item that starts
   precisely at offset 13959168 (item 7 in the log tree, shown before);

3) However that checksum item only covers 64Kb of data, and not 192Kb
   of data;

4) As a result only the checksums for the first 64Kb of data referenced
   by the file extent item are found and copied to the fs/subvolume tree.
   The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
   the corresponding data checksums found and copied to the fs/subvolume
   tree.

5) After replaying the log userspace will not be able to read the file
   range from 384Kb to 512Kb, because the checksums are missing and
   resulting in an -EIO error.

The following steps reproduce this scenario:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt/sdc

  $ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
  $ xfs_io -c "fsync" /mnt/sdc/foobar
  $ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar

  $ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
  $ xfs_io -c "fsync" /mnt/sdc/foobar

  $ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
  $ xfs_io -c "fsync" /mnt/sdc/foobar

  <power failure>

  $ mount /dev/sdc /mnt/sdc
  $ md5sum /mnt/sdc/foobar
  md5sum: /mnt/sdc/foobar: Input/output error

  $ dmesg | tail
  [165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
  [165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
  [165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
  [165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
  [165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
  [165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
  [165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
  [165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
  [165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
  [165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1

Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.

This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.

A test case for fstests follows soon.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Callers of alloc_test_extent_buffer have not correctly interpreted the
return value as error pointer, as alloc_test_extent_buffer should behave
as alloc_extent_buffer. The self-tests were unaffected but
btrfs_find_create_tree_block could call both functions and that would
cause problems up in the call chain.

Fixes: faa2dbf0

 ("Btrfs: add sanity tests for new qgroup accounting code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The value 0 for devs_max means to spread the allocated chunks over all
available devices, eg. stripe for RAID0 or RAID5. This got mistakenly
copied to the RAID1C3/4 profiles. The intention is to have exactly 3 and
4 copies respectively.

Fixes: 47e6f742 ("btrfs: add support for 3-copy replication (raid1c3)")
Fixes: 8d6fac00

 ("btrfs: add support for 4-copy replication (raid1c4)")
Signed-off-by: David Sterba <dsterba@suse.com>

Argument BTRFS_FILE_EXTENT_INLINE_DATA_START is defined as offsetof(),
which returns type size_t, so we need %zu instead of %lu.

This fixes a build warning on 32-bit ARM:

  ../fs/btrfs/tree-checker.c: In function 'check_extent_data_item':
  ../fs/btrfs/tree-checker.c:230:43: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=]
    230 |     "invalid item size, have %u expect [%lu, %u)",
        |                                         ~~^
        |                                           long unsigned int
        |                                         %u

Fixes: 153a6d29

 ("btrfs: tree-checker: Check item size before reading file extent type")
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andreas Färber <afaerber@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If we're rename exchanging two subvols we'll try to lock this lock
twice, which is bad.  Just lock once if either of the ino's are subvols.

Fixes: cdd1fedf

 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We have a BUG_ON(ret < 0) in find_free_extent from
btrfs_cache_block_group.  If we fail to allocate our ctl we'll just
panic, which is not good.  Instead just go on to another block group.
If we fail to find a block group we don't want to return ENOSPC, because
really we got a ENOMEM and that's the root of the problem.  Save our
return from btrfs_cache_block_group(), and then if we still fail to make
our allocation return that ret so we get the right error back.

Tested with inject-error.py from bcc.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Testing with the new fsstress uncovered a pretty nasty deadlock with
lookup and snapshot deletion.

Process A
unlink
 -> final iput
   -> inode_tree_del
     -> synchronize_srcu(subvol_srcu)

Process B
btrfs_lookup  <- srcu_read_lock() acquired here
  -> btrfs_iget
    -> find inode that has I_FREEING set
      -> __wait_on_freeing_inode()

We're holding the srcu_read_lock() while doing the iget in order to make
sure our fs root doesn't go away, and then we are waiting for the inode
to finish freeing.  However because the free'ing process is doing a
synchronize_srcu() we deadlock.

Fix this by dropping the synchronize_srcu() in inode_tree_del().  We
don't need people to stop accessing the fs root at this point, we're
only adding our empty root to the dead roots list.

A larger much more invasive fix is forthcoming to address how we deal
with fs roots, but this fixes the immediate problem.

Fixes: 76dda93c

 ("Btrfs: add snapshot/subvolume destroy ioctl")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When using the NO_HOLES feature if we clone a range that contains a hole
and a temporary ENOSPC happens while dropping extents from the target
inode's range, we can end up failing and aborting the transaction with
-EEXIST or with a corrupt file extent item, that has a length greater
than it should and overlaps with other extents. For example when cloning
the following range from inode A to inode B:

  Inode A:

    extent A1                                          extent A2
  [ ----------- ]  [ hole, implicit, 4MB length ]  [ ------------- ]
  0            1MB                                 5MB            6MB

  Range to clone: [1MB, 6MB)

  Inode B:

    extent B1       extent B2        extent B3         extent B4
  [ ---------- ]  [ --------- ]    [ ---------- ]    [ ---------- ]
  0           1MB 1MB        2MB   2MB        5MB    5MB         6MB

  Target range: [1MB, 6MB) (same as source, to make it easier to explain)

The following can happen:

1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents();

2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents()
   set 'drop_end' to 2MB, meaning it was able to drop only extent B2;

3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 2MB - 1MB =
   1MB;

4) We then attempt to insert a file extent item at inode B with a file
   offset of 5MB, which is the value of clone_info->file_offset. This
   fails with error -EEXIST because there's already an extent at that
   offset (extent B4);

5) We abort the current transaction with -EEXIST and return that error
   to user space as well.

Another example, for extent corruption:

  Inode A:

    extent A1                                           extent A2
  [ ----------- ]   [ hole, implicit, 10MB length ]  [ ------------- ]
  0            1MB                                  11MB            12MB

  Inode B:

    extent B1         extent B2
  [ ----------- ]   [ --------- ]    [ ----------------------------- ]
  0            1MB 1MB         5MB  5MB                             12MB

  Target range: [1MB, 12MB) (same as source, to make it easier to explain)

1) btrfs_punch_hole_range() gets -ENOSPC from __btrfs_drop_extents();

2) At that point, 'cur_offset' is set to 1MB and __btrfs_drop_extents()
   set 'drop_end' to 5MB, meaning it was able to drop only extent B2;

3) We then compute 'clone_len' as 'drop_end' - 'cur_offset' = 5MB - 1MB =
   4MB;

4) We then insert a file extent item at inode B with a file offset of 11MB
   which is the value of clone_info->file_offset, and a length of 4MB (the
   value of 'clone_len'). So we get 2 extents items with ranges that
   overlap and an extent length of 4MB, larger then the extent A2 from
   inode A (1MB length);

5) After that we end the transaction, balance the btree dirty pages and
   then start another or join the previous transaction. It might happen
   that the transaction which inserted the incorrect extent was committed
   by another task so we end up with extent corruption if a power failure
   happens.

So fix this by making sure we attempt to insert the extent to clone at
the destination inode only if we are past dropping the sub-range that
corresponds to a hole.

Fixes: 690a5dbf

 ("Btrfs: fix ENOSPC errors, leading to transaction aborts, when cloning extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The branch of qgroup_rescan_init which is executed from the mount
path prints wrong errors messages. The textual print out in case
BTRFS_QGROUP_STATUS_FLAG_RESCAN/BTRFS_QGROUP_STATUS_FLAG_ON are not
set are transposed. Fix it by exchanging their place.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

After previous patches removing bdev being passed around to set it to
bio, it has become unused in submit_extent_page. So it now has "only" 13
parameters.

Signed-off-by: David Sterba <dsterba@suse.com>

We can now remove the bdev from extent_map. Previous patches made sure
that bio_set_dev is correctly in all places and that we don't need to
grab it from latest_bdev or pass it around inside the extent map.

Signed-off-by: David Sterba <dsterba@suse.com>

bio_set_dev sets a bdev to a bio and is not only setting a pointer bug
also changing some state bits if there was a different bdev set before.
This is one thing that's not needed.

Another thing is that setting a bdev at bio allocation time is too early
and actually does not work with plain redundancy profiles, where each
time we submit a bio to a device, the bdev is set correctly.

In many places the bio bdev is set to latest_bdev that seems to serve as
a stub pointer "just to put something to bio". But we don't have to do
that.

Where do we know which bdev to set:

* for regular IO: submit_stripe_bio that's called by btrfs_map_bio

* repair IO: repair_io_failure, read or write from specific device

* super block write (using buffer_heads but uses raw bdev) and barriers

* scrub: this does not use all regular IO paths as it needs to reach all
  copies, verify and fixup eventually, and for that all bdev management
  is independent

* raid56: rbio_add_io_page, for the RMW write

* integrity-checker: does it's own low-level block tracking

Signed-off-by: David Sterba <dsterba@suse.com>

This is preparatory patch to remove @bdev parameter from
submit_extent_page. It can't be removed completely, because the cgroups
need it for wbc when initializing the bio

wbc_init_bio
  bio_associate_blkg_from_css
    dereference bdev->bi_disk->queue

The bdev pointer is the same as latest_bdev, thus no functional change.
We can retrieve it from fs_devices that's reachable through several
dereferences. The local variable shadows the parameter, but that's only
temporary.

Signed-off-by: David Sterba <dsterba@suse.com>

Testing with the new fsstress support for subvolumes uncovered a pretty
bad problem with rename exchange on subvolumes.  We're modifying two
different subvolumes, but we only start the transaction on one of them,
so the other one is not added to the dirty root list.  This is caught by
btrfs_cow_block() with a warning because the root has not been updated,
however if we do not modify this root again we'll end up pointing at an
invalid root because the root item is never updated.

Fix this by making sure we add the destination root to the trans list,
the same as we do with normal renames.  This fixes the corruption.

Fixes: cdd1fedf

 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we
set the block group to RO mode and then wait for any ongoing writes into
extents of the block group to complete. While doing that wait we overwrite
the value of the variable 'ret' and can break out of the loop if an error
happens without turning the block group back into RW mode. So what happens
is the following:

1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group
   to RO mode (its ->ro field set to 1 or incremented to some value > 1);

2) Then btrfs_wait_ordered_roots() returns a value > 0;

3) Then if either joining or committing the transaction fails, we break
   out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving
   the block group in RO mode forever.

To fix this, just remove the code that waits for ongoing writes to extents
of the block group, since it's not needed because in the initial setup
phase of a device replace operation, before starting to find all chunks
and their extents, we set the target device for replace while holding
fs_info->dev_replace->rwsem, which ensures that after releasing that
semaphore, any writes into the source device are made to the target device
as well (__btrfs_map_block() guarantees that). So while at
scrub_enumerate_chunks() we only need to worry about finding and copying
extents (from the source device to the target device) that were written
before we started the device replace operation.

Fixes: f0e9b7d6

 ("Btrfs: fix race setting block group readonly during device replace")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
When running btrfs/072 with only one online CPU, it has a pretty high
chance to fail:

  btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg)
  - output mismatch (see xfstests-dev/results//btrfs/072.out.bad)
      --- tests/btrfs/072.out     2019-10-22 15:18:14.008965340 +0800
      +++ /xfstests-dev/results//btrfs/072.out.bad      2019-11-14 15:56:45.877152240 +0800
      @@ -1,2 +1,3 @@
       QA output created by 072
       Silence is golden
      +Scrub find errors in "-m dup -d single" test
      ...

And with the following call trace:

  BTRFS info (device dm-5): scrub: started on devid 1
  ------------[ cut here ]------------
  BTRFS: Transaction aborted (error -27)
  WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs]
  CPU: 0 PID: 55087 Comm: btrfs Tainted: G        W  O      5.4.0-rc1-custom+ #13
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs]
  Call Trace:
   __btrfs_end_transaction+0xdb/0x310 [btrfs]
   btrfs_end_transaction+0x10/0x20 [btrfs]
   btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs]
   scrub_enumerate_chunks+0x264/0x940 [btrfs]
   btrfs_scrub_dev+0x45c/0x8f0 [btrfs]
   btrfs_ioctl+0x31a1/0x3fb0 [btrfs]
   do_vfs_ioctl+0x636/0xaa0
   ksys_ioctl+0x67/0x90
   __x64_sys_ioctl+0x43/0x50
   do_syscall_64+0x79/0xe0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  ---[ end trace 166c865cec7688e7 ]---

[CAUSE]
The error number -27 is -EFBIG, returned from the following call chain:
btrfs_end_transaction()
|- __btrfs_end_transaction()
   |- btrfs_create_pending_block_groups()
      |- btrfs_finish_chunk_alloc()
         |- btrfs_add_system_chunk()

This happens because we have used up all space of
btrfs_super_block::sys_chunk_array.

The root cause is, we have the following bad loop of creating tons of
system chunks:

1. The only SYSTEM chunk is being scrubbed
   It's very common to have only one SYSTEM chunk.
2. New SYSTEM bg will be allocated
   As btrfs_inc_block_group_ro() will check if we have enough space
   after marking current bg RO. If not, then allocate a new chunk.
3. New SYSTEM bg is still empty, will be reclaimed
   During the reclaim, we will mark it RO again.
4. That newly allocated empty SYSTEM bg get scrubbed
   We go back to step 2, as the bg is already mark RO but still not
   cleaned up yet.

If the cleaner kthread doesn't get executed fast enough (e.g. only one
CPU), then we will get more and more empty SYSTEM chunks, using up all
the space of btrfs_super_block::sys_chunk_array.

[FIX]
Since scrub/dev-replace doesn't always need to allocate new extent,
especially chunk tree extent, so we don't really need to do chunk
pre-allocation.

To break above spiral, here we introduce a new parameter to
btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we
need extra chunk pre-allocation.

For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass
@do_chunk_alloc=false.
This should keep unnecessary empty chunks from popping up for scrub.

Also, since there are two parameters for btrfs_inc_block_group_ro(),
add more comment for it.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

struct btrfs_fs_devices::rotating currently is declared as an integer
variable but only used as a boolean.

Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

struct btrfs_fs_devices::seeding currently is declared as an integer
variable but only used as a boolean.

Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.

Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For read_one_block_group(), its only caller has already got the item key
to search next block group item.

So we can use that key directly without doing our own convertion on
stack.

Also, since that key used in btrfs_read_block_groups() is vital for
block group item search, add 'const' keyword for that parameter to
prevent read_one_block_group() to modify it.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Refactor the work inside the loop of btrfs_read_block_groups() into one
separate function, read_one_block_group().

This allows read_one_block_group to be reused for later BG_TREE feature.

The refactor does the following extra fix:
- Use btrfs_fs_incompat() to replace open-coded feature check

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: David Sterba <dsterba@suse.com>

A nice writeup of the LKMM (Linux Kernel Memory Model) rules for access
once policies can be found here
https://lwn.net/Articles/799218/#Access-Marking%20Policies

 .

The locked and unlocked access to eb::blocking_writers should be
annotated accordingly, following this:

Writes:

- locked write must use ONCE, may use plain read
- unlocked write must use ONCE

Reads:

- unlocked read must use ONCE
- locked read may use plain read iff not mixed with unlocked read
- unlocked read then locked must use ONCE

There's one difference on the assembly level, where
btrfs_tree_read_lock_atomic and btrfs_try_tree_read_lock used the cached
value and did not reevaluate it after taking the lock. This could have
missed some opportunities to take the lock in case blocking writers
changed between the calls, but the window is just a few instructions
long. As this is in try-lock, the callers handle that.

Signed-off-by: David Sterba <dsterba@suse.com>

The increment and decrement was inherited from previous version that
used atomics, switched in commit 06297d8c ("btrfs: switch
extent_buffer blocking_writers from atomic to int"). The only possible
values are 0 and 1 so we can set them directly.

The generated assembly (gcc 9.x) did the direct value assignment in
btrfs_set_lock_blocking_write (asm diff after change in 06297d8c

):

     5d:   test   %eax,%eax
     5f:   je     62 <btrfs_set_lock_blocking_write+0x22>
     61:   retq

  -  62:   lock incl 0x44(%rdi)
  -  66:   add    $0x50,%rdi
  -  6a:   jmpq   6f <btrfs_set_lock_blocking_write+0x2f>

  +  62:   movl   $0x1,0x44(%rdi)
  +  69:   add    $0x50,%rdi
  +  6d:   jmpq   72 <btrfs_set_lock_blocking_write+0x32>

The part in btrfs_tree_unlock did a decrement because
BUG_ON(blockers > 1) is probably not a strong hint for the compiler, but
otherwise the output looks safe:

  - lock decl 0x44(%rdi)

  + sub    $0x1,%eax
  + mov    %eax,0x44(%rdi)

Signed-off-by: David Sterba <dsterba@suse.com>

There are two ifs that use eb::blocking_writers. As this is a variable
modified inside and outside of locks, we could minimize number of
accesses to avoid problems with getting different results at different
times.

The access here is locked so this can only race with btrfs_tree_unlock
that sets blocking_writers to 0 without lock and unsets the lock owner.

The first branch is taken only if the same thread already holds the
lock, the second if checks for blocking writers. Here we'd either unlock
and wait, or proceed. Both are valid states of the locking protocol.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>

When there are no raid1c3 or raid1c4 block groups left after balance
(either convert or with other filters applied), remove the incompat bit.
This is already done for RAID56, do the same for RAID1C34.

Signed-off-by: David Sterba <dsterba@suse.com>

The new raid1c3 and raid1c4 profiles are backward incompatible and the
name shall be 'raid1c34', the status can be found in the global
supported features in /sys/fs/btrfs/features or in the per-filesystem
directory.

Signed-off-by: David Sterba <dsterba@suse.com>

Add new block group profile to store 4 copies in a simliar way that
current RAID1 does.  The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the 2-
and 3-copy RAID1.

The minimum number of devices is 4, the maximum number of devices/chunks
that can be lost/damaged is 3. There is no comparable traditional RAID
level, the profile is added for future needs to accompany triple-parity
and beyond.

Signed-off-by: David Sterba <dsterba@suse.com>

Add new block group profile to store 3 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the
2-copy RAID1.

The minimum number of devices is 3, the maximum number of devices/chunks
that can be lost/damaged is 2. Like RAID6 but with 33% space
utilization.

Signed-off-by: David Sterba <dsterba@suse.com>

In commit "Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios",
cow_file_range_async gained wbc as a parameter and this makes passing
write flags redundant. Set it inside the function and remove the
parameter.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

__extent_writepage reads write flags from wbc and passes both to
__extent_writepage_io. This makes write_flags redundant and we can
remove it.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Backreference walking, which is used by send to figure if it can issue
clone operations instead of write operations, can be very slow and use
too much memory when extents have many references. This change simply
skips backreference walking when an extent has more than 64 references,
in which case we fallback to a write operation instead of a clone
operation. This limit is conservative and in practice I observed no
signicant slowdown with up to 100 references and still low memory usage
up to that limit.

This is a temporary workaround until there are speedups in the backref
walking code, and as such it does not attempt to add extra interfaces or
knobs to tweak the threshold.

Reported-by: Atemu <atemu.main@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa


CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit a96fbc72

 ("Btrfs: allow file data clone within a
file"). This change adds support for it.

Example:

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt/sdd

  $ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar
  $ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar

  $ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap

  $ mkfs.btrfs -f /dev/sde
  $ mount /dev/sde /mnt/sde

  $ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde

Without this change file foobar at the destination has a single 128Kb
extent:

  $ filefrag -v /mnt/sde/snap/foobar
  Filesystem type is: 9123683e
  File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
   ext:     logical_offset:        physical_offset: length:   expected: flags:
     0:        0..      31:          0..        31:     32:             last,unknown_loc,delalloc,eof
  /mnt/sde/snap/foobar: 1 extent found

With this we get a single 64Kb extent that is shared at file offsets 0
and 64K, just like in the source filesystem:

  $ filefrag -v /mnt/sde/snap/foobar
  Filesystem type is: 9123683e
  File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
   ext:     logical_offset:        physical_offset: length:   expected: flags:
     0:        0..      15:       3328..      3343:     16:             shared
     1:       16..      31:       3328..      3343:     16:       3344: last,shared,eof
  /mnt/sde/snap/foobar: 2 extents found

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:

  btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%

type:		bbio->map_type, in above case, it's SINGLE DATA.
start:		Logical address of this trim
len:		Logical length of this trim
trimmed:	Physically trimmed bytes
ratio:		trimmed / len

Thus leaving some unused space not discarded.

[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:

btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
   |- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
   |- btrfs_discard_extent()

However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.

When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:

      |<---    BG1    --->|<---      BG2     --->|
      |//////|<--   Range to discard   --->|/////|

To discard that range, we have the following calls:

  btrfs_discard_extent()
  |- btrfs_map_block()
  |  Returned bbio will end at BG1's end. As btrfs_map_block()
  |  never returns result across block group boundary.
  |- btrfs_issuse_discard()
     Issue discard for each stripe.

So we will only discard the range in BG1, not the remaining part in BG2.

Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.

[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
  btrfs_map_block() uses its @length paramter to notify the caller how
  many bytes are mapped in current call.
  With __btrfs_map_block_for_discard() also modifing the @length,
  btrfs_discard_extent() now understands when to do extra trim.

- Call btrfs_map_block() in a loop until we hit the range end Since we
  now know how many bytes are mapped each time, we can iterate through
  each block group boundary and issue correct trim for each range.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The old code goes:

 	offset = logical - em->start;
	length = min_t(u64, em->len - offset, length);

Where @length calculation is dependent on offset, it can take reader
several more seconds to find it's just the same code as:

 	offset = logical - em->start;
	length = min_t(u64, em->start + em->len - logical, length);

Use above code to make the length calculate independent from other
variable, thus slightly increase the readability.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In check_extent_data_item(), we read file extent type without verifying
if the item size is valid.

Add such check to ensure the file extent type we read is correct.

The check is not as accurate as we need to cover both inline and regular
extents, so it only checks if the item size is larger or equal to inline
header.
So the existing size checks on inline/regular extents are still needed.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The "&fs_info->dev_replace.rwsem" and "&dev_replace->rwsem" refer to
the same lock but Smatch is not clever enough to figure that out so it
leads to static checker warnings.  It's better to use it consistently
anyway.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The backup_root_index member stores the index at which the backup root
should be saved upon next transaction commit. However, there is a
small deviation from this behavior in the form of a check in
backup_super_roots which checks if current root generation equals to the
generation of the previous root. This can trigger in the following
scenario:

slot0: gen-2
slot1: gen-1
slot2: gen
slot3: unused

Now suppose slot3 (which is also the root specified in the super block)
is corrupted hence init_tree_roots chooses to use the backup root at
slot2, meaning read_backup_root will read slot2 and assign the
superblock generation to gen-1. Despite this backup_root_index will
point at slot3 because its init happens in init_backup_root_slot, long
before any parsing of the backup roots occur. Then on next transaction
start, gen-1 will be incremented by 1 making the root's generation
equal gen. Subsequently, on transaction commit the following check
triggers:

  if (btrfs_backup_tree_root_gen(root_backup) ==
           btrfs_header_generation(info->tree_root->node))

This causes the 'next_backup', which is the index at which the backup is
going to be written to, to set to last_backup, which will be slot2.

All of this is a very confusing way of expressing the following
invariant:

 Always write a backup root at the index following the last used backup
 root.

This commit streamlines this logic by setting backup_root_index to the
next index after the one used for mount.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The old name name was an awful misnomer because it didn't really find
the oldest super backup per-se but rather its slot. For example if we
have:

slot0: gen - 2
slot1: gen - 1
slot2: gen
slot3: empty

init_backup_root_slot will return slot3 and not slot0.

The new name is more appropriate since the function doesn't care whether
there is a valid backup in the returned slot or not.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This function has been superseded by previous commits and is no longer
used so just remove it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>