- Jan 31, 2008
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: PPC: Fix powerpc vio_find_name to not use devices_subsys Driver core: add bus_find_device_by_name function Module: check to see if we have a built in module with the same name x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c Driver core: Fix up build when CONFIG_BLOCK=N
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (249 commits) KVM: Move apic timer migration away from critical section KVM: Put kvm_para.h include outside __KERNEL__ KVM: Fix unbounded preemption latency KVM: Initialize the mmu caches only after verifying cpu support KVM: MMU: Fix dirty page setting for pages removed from rmap KVM: Portability: Move kvm_fpu to asm-x86/kvm.h KVM: x86 emulator: Only allow VMCALL/VMMCALL trapped by #UD KVM: MMU: Merge shadow level check in FNAME(fetch) KVM: MMU: Move kvm_free_some_pages() into critical section KVM: MMU: Switch to mmu spinlock KVM: MMU: Avoid calling gfn_to_page() in mmu_set_spte() KVM: Add kvm_read_guest_atomic() KVM: MMU: Concurrent guest walkers KVM: Disable vapic support on Intel machines with FlexPriority KVM: Accelerated apic support KVM: local APIC TPR access reporting facility KVM: Print data for unimplemented wrmsr KVM: MMU: Add cache miss statistic KVM: MMU: Coalesce remote tlb flushes KVM: Expose ioapic to ia64 save/restore APIs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: (21 commits) dlm: static initialization improvements dlm: clean ups dlm: Sanity check namelen before copying it dlm: keep cached master rsbs during recovery dlm: change error message to debug dlm: fix possible use-after-free dlm: limit dir lookup loop dlm: reject normal unlock when lock is waiting for lookup dlm: validate messages before processing dlm: reject messages from non-members dlm: another call to confirm_master in receive_request_reply dlm: recover locks waiting for overlap replies dlm: clear ast_type when removing from astqueue dlm: use fixed errno values in messages dlm: swap bytes for rcom lock reply dlm: align midcomms message buffer dlm: close othercons dlm: use dlm prefix on alloc and free functions dlm: don't print common non-errors dlm: proper prototypes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (21 commits) [SCSI] Revert "[SCSI] aacraid: fib context lock for management ioctls" [SCSI] bsg: copy the cmd_type field to the subordinate request for bidi [SCSI] handle scsi_init_queue failure properly [SCSI] destroy scsi_bidi_sdb_cache in scsi_exit_queue [SCSI] scsi_debug: add XDWRITEREAD_10 support [SCSI] scsi_debug: add bidi data transfer support [SCSI] scsi_debug: add get_data_transfer_info helper function [SCSI] remove use_sg_chaining [SCSI] bidirectional: fix up for the new blk_end_request code [SCSI] bidirectional command support [SCSI] implement scsi_data_buffer [SCSI] tgt: use scsi_init_io instead of scsi_alloc_sgtable [SCSI] aic7xxx: fix warnings with CONFIG_PM disabled [SCSI] aic79xx: fix warnings with CONFIG_PM disabled [SCSI] aic7xxx: fix ahc_done check SCB_ACTIVE for tagged transactions [SCSI] sgiwd93: use cached memory access to make driver work on IP28 [SCSI] zfcp: fix sense_buffer access bug [SCSI] ncr53c8xx: fix sense_buffer access bug [SCSI] aic79xx: fix sense_buffer access bug [SCSI] hptiop: fix sense_buffer access bug ...
-
Randy Dunlap authored
Fix docbook fatal error: docproc: linux-2.6.24-git8/block/ll_rw_blk.c: No such file or directory Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc empty line warning: Warning(linux-2.6.24-git8//drivers/base/class.c:866): bad line: Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
James Bottomley authored
This reverts commit a119ee8e . Adaptec found this was causing system lockups. Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Bottomley authored
This fixes a problem in SCSI where we use the (previously uninitialised) cmd_type via blk_pc_request() to set up the transfer in scsi_init_sgtable(). Acked-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
scsi_init_queue is expected to clean up allocated things when it fails. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
Needs to call kmem_cache_destroy for scsi_bidi_sdb_cache in scsi_exit_queue. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
This enables fill_from_dev_buffer and fetch_to_dev_buffer to handle bidi commands. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
This adds get_data_transfer_info helper function that get lha and sectors for READ_* and WRITE_* commands (and XDWRITEREAD_10 later). Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Bottomley authored
With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Kiyoshi Ueda authored
Signed-off-by:
Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Boaz Harrosh authored
At the block level bidi request uses req->next_rq pointer for a second bidi_read request. At Scsi-midlayer a second scsi_data_buffer structure is used for the bidi_read part. This bidi scsi_data_buffer is put on request->next_rq->special. Struct scsi_cmnd is not changed. - Define scsi_bidi_cmnd() to return true if it is a bidi request and a second sgtable was allocated. - Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer from this command This API is to isolate users from the mechanics of bidi. - Define scsi_end_bidi_request() to do what scsi_end_request() does but for a bidi request. This is necessary because bidi commands are a bit tricky here. (See comments in body) - scsi_release_buffers() will also release the bidi_read scsi_data_buffer - scsi_io_completion() on bidi commands will now call scsi_end_bidi_request() and return. - The previous work done in scsi_init_io() is now done in a new scsi_init_sgtable() (which is 99% identical to old scsi_init_io()) The new scsi_init_io() will call the above twice if needed also for the bidi_read command. Only at this point is a command bidi. - In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not confused by a get-sense command that looks like bidi. This is done by puting NULL at request->next_rq, and restoring. [jejb: update to sg_table and resolve conflicts also update to blk-end-request and resolve conflicts] Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Boaz Harrosh authored
In preparation for bidi we abstract all IO members of scsi_cmnd, that will need to duplicate, into a substructure. - Group all IO members of scsi_cmnd into a scsi_data_buffer structure. - Adjust accessors to new members. - scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of scsi_cmnd. And work on it. - Adjust scsi_init_io() and scsi_release_buffers() for above change. - Fix other parts of scsi_lib/scsi.c to members migration. Use accessors where appropriate. - fix Documentation about scsi_cmnd in scsi_host.h - scsi_error.c * Changed needed members of struct scsi_eh_save. * Careful considerations in scsi_eh_prep/restore_cmnd. - sd.c and sr.c * sd and sr would adjust IO size to align on device's block size so code needs to change once we move to scsi_data_buff implementation. * Convert code to use scsi_for_each_sg * Use data accessors where appropriate. - tgt: convert libsrp to use scsi_data_buffer - isd200: This driver still bangs on scsi_cmnd IO members, so need changing [jejb: rebased on top of sg_table patches fixed up conflicts and used the synergy to eliminate use_sg and sg_count] Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Boaz Harrosh authored
If we export scsi_init_io()/scsi_release_buffers() instead of scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more insulated from scsi_lib changes. As a bonus it will also gain bidi capability when it comes. [jejb: rebase on to sg_table and fix up rejections] Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Acked-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
CC [M] drivers/scsi/aic7xxx/aic7xxx_osm_pci.o drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:148: warning: 'ahc_linux_pci_dev_suspend' defined but not used drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:166: warning: 'ahc_linux_pci_dev_resume' defined but not used This moves aic7xxx_pci_driver struct, removes some forward declarations, and adds some ifdef CONFIG_PM. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
CC [M] drivers/scsi/aic7xxx/aic79xx_osm_pci.o drivers/scsi/aic7xxx/aic79xx_osm_pci.c:101: warning: 'ahd_linux_pci_dev_suspend' defined but not used drivers/scsi/aic7xxx/aic79xx_osm_pci.c:121: warning: 'ahd_linux_pci_dev_resume' defined but not used This moves aic79xx_pci_driver struct, removes some forward declarations, and adds some ifdef CONFIG_PM. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
David Milburn authored
The driver only needs to check the SCB_ACTIVE flag if the SCB is not in the untagged queue. If the driver is in error recovery, you may end panic'ing on a TUR that is in the untagged queue. Attempting to queue an ABORT message CDB: 0x0 0x0 0x0 0x0 0x0 0x0 SCB 3 done'd twice This patch is included in Adaptec's 6.3.11 driver on their website. Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Thomas Bogendoerfer authored
SGI IP28 machines would need special treatment (enable adding addtional wait states) when accessing memory uncached. To avoid this pain I changed the driver to use only cached access to memory. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
The commit de25deb1 changed scsi_cmnd.sense_buffer from a static array to a dynamically allocated buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
The commit de25deb1 changed scsi_cmnd.sense_buffer from a static array to a dynamically allocated buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
The commit de25deb1 changed scsi_cmnd.sense_buffer from a static array to a dynamically allocated buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
FUJITA Tomonori authored
&cmnd->sense_buffer now zeroes the wrong thing. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Nathan Lynch authored
On a big powerpc box I got the following oops with 2.6.24-git2: sym0: <1010-66> rev 0x1 at pci 0000:d0:01.0 irq 215 sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) scsi 0:0:8:0: Direct-Access IBM ST318305LC C509 PQ: 0 ANSI: 3 target0:0:8: tagged command queuing enabled, command queue depth 16. target0:0:8: Beginning Domain Validation target0:0:8: asynchronous target0:0:8: wide asynchronous target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000038460 cpu 0x25: Vector: 300 (Data Access) at [c00000000f567840] pc: c000000000038460: .memcpy+0x60/0x280 lr: d000000000050280: .sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx] sp: c00000000f567ac0 msr: 8000000000009032 dar: 0 dsisr: 42000000 current = 0xc000006d1e0af0a0 paca = 0xc0000000004afc00 pid = 0, comm = swapper enter ? for help [link register ] d000000000050280 .sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx] [c00000000f567ac0] c00000000f567b80 (unreliable) [c00000000f567b80] d0000000000552b8 .sym_complete_error+0x12c/0x1bc [sym53c8xx] [c00000000f567c20] d0000000000561a4 .sym_int_sir+0xaa4/0x1718 [sym53c8xx] [c00000000f567d00] d000000000057e8c .sym_interrupt+0x4e4/0x6ec [sym53c8xx] [c00000000f567dc0] d00000000004fdf4 .sym53c8xx_intr+0x6c/0xdc [sym53c8xx] [c00000000f567e50] c0000000000a83e0 .handle_IRQ_event+0x7c/0xec [c00000000f567ef0] c0000000000aa344 .handle_fasteoi_irq+0x130/0x1f0 [c00000000f567f90] c00000000002a538 .call_handle_irq+0x1c/0x2c [c000004d5e0b3a90] c00000000000c320 .do_IRQ+0x108/0x1d0 [c000004d5e0b3b20] c000000000004790 hardware_interrupt_entry+0x18/0x1c The memset() in sym_set_cam_result_error() would appear to be trashing the scsi_cmnd struct instead of clearing sense_buffer. Signed-off-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Denis Cheng authored
also change name_prefix from char pointer to char array. Signed-off-by:
Denis Cheng <crquan@gmail.com> Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
A couple small clean-ups. Remove unnecessary wrapper-functions in rcom.c, and remove unnecessary casting and an unnecessary ASSERT in util.c. Signed-off-by:
David Teigland <teigland@redhat.com>
-
Patrick Caulfeld authored
The 32/64 compatibility code in the DLM does not check the validity of the lock name length passed into it, so it can easily overwrite memory if the value is rubbish (as early versions of libdlm can cause with unlock calls, it doesn't zero the field). This patch restricts the length of the name to the amount of data actually passed into the call. Signed-off-by:
Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
To prevent the master of an rsb from changing rapidly, an unused rsb is kept on the "toss list" for a period of time to be reused. The toss list was being cleared completely for each recovery, which is unnecessary. Much of the benefit of the toss list can be maintained if nodes keep rsb's in their toss list that they are the master of. These rsb's need to be included when the resource directory is rebuilt during recovery. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
The invalid lockspace messages are normal and can appear relatively often. They should be suppressed without debugging enabled. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
The dlm_put_lkb() can free the lkb and its associated ua structure, so we can't depend on using the ua struct after the put. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
In a rare case we may need to repeat a local resource directory lookup due to a race with removing the rsb and removing the resdir record. We'll never need to do more than a single additional lookup, though, so the infinite loop around the lookup can be removed. In addition to being unnecessary, the infinite loop is dangerous since some other unknown condition may appear causing the loop to never break. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
Non-forced unlocks should be rejected if the lock is waiting on the rsb_lookup list for another lock to establish the master node. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
There was some hit and miss validation of messages that has now been cleaned up and unified. Before processing a message, the new validate_message() function checks that the lkb is the appropriate type, process-copy or master-copy, and that the message is from the correct nodeid for the the given lkb. Other checks and assertions on the lkb type and nodeid have been removed. The assertions were particularly bad since they would panic the machine instead of just ignoring the bad message. Although other recent patches have made processing old message unlikely, it still may be possible for an old message to be processed and caught by these checks. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
Messages from nodes that are no longer members of the lockspace should be ignored. When nodes are removed from the lockspace, recovery can sometimes complete quickly enough that messages arrive from a removed node after recovery has completed. When processed, these messages would often cause an error message, and could in some cases change some state, causing problems. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
When a failed request (EBADR or ENOTBLK) is unlocked/canceled instead of retried, there may be other lkb's waiting on the rsb_lookup list for it to complete. A call to confirm_master() is needed to move on to the next waiting lkb since the current one won't be retried. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
When recovery looks at locks waiting for replies, it fails to consider locks that have already received a reply for their first remote operation, but not received a reply for secondary, overlapping unlock/cancel. The appropriate stub reply needs to be called for these waiters. Appears when we start doing recovery in the presence of a many overlapping unlock/cancel ops. Signed-off-by:
David Teigland <teigland@redhat.com>
-
David Teigland authored
The lkb_ast_type field indicates whether the lkb is on the astqueue list. When clearing locks for a process, lkb's were being removed from the astqueue list without clearing the field. If release_lockspace then happened immediately afterward, it could try to remove the lkb from the list a second time. Appears when process calls libdlm dlm_release_lockspace() which first closes the ls dev triggering clear_proc_locks, and then removes the ls (a write to control dev) causing release_lockspace(). Signed-off-by:
David Teigland <teigland@redhat.com>
-