This reverts commit 072030b1

.
This is no longer necessary when using newer DMUB F/W.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The same parade TCON issue can potentially happen on Phoenix, and the same
PSR resilience changes have been ported into the DMUB firmware.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A number of parade TCONs are causing system hangs when utilized with
older DMUB firmware and PSR-SU. Some changes have been introduced into
DMUB firmware to add resilience against these failures.

Don't allow running PSR-SU unless on the newer firmware.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443


Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The `DMUB_FW_VERSION` macro has a mistake in that the revision field
is off by one byte. The last byte is typically used for other purposes
and not a revision.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The feature mask bit was not correctly cleared. Without that, the L2H
and H2L interrupts cannot be enabled.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Endless assert caused by LinesInDETChroma=0.

[how]
Don't floor for LinesInDETChroma=0

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Hong-lu Cheng <hong-lu.cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
This display doesn't properly indicate link loss through DPCD bits such
as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE,
which all remain set.

In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases.

For these reasons, we can miss re-training the link, since we don't
properly detect link loss with this display.

[Why]
Add display-specific workaround to read DPCD204h, so that we can detect
link loss based on 128b132b-specific status bits in this register.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

port SRIOV VF missed changes from gfx_v9_0 to gfx_v9_4_3.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If the securedisplay TA failed to load the first time, it's unlikely
to work again after a suspend/resume cycle or reset cycle and it appears
to be causing problems in futher attempts.

Fixes: e42dfa66

 ("drm/amdgpu: Add secure display TA load for Renoir")
Reported-by: Filip Hejsek <filip.hejsek@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2633


Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For GFX 9.4.3, interrupt handling needs to be updated for:
- Interrupt cookie will have a NodeId field. Each KFD
  node needs to check the NodeId before processing the
  interrupt.
- For CPX mode, there are additional checks of client ID
  needed to process the interrupt.
- Add NodeId to the process drain interrupt.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since adding gang submit we need to take the gang size into account
while reserving fences.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 4624459c

 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().

Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe415

 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Publish energy data in 15.625mJ unit for SMU v13.0.6. The same unit is
used in Aldebaran also.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Modify it such that it doesn't change the instance mask parameter.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

sdma halt/unhalt is performed by psp when frontdoor
loading used,so this can be skipped.

v2: Instead of removing halt/unhalt completely,
    driver will do it only during backdoor load.

Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No RAS irq is allowed.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add abnormal fan detection for smu 13.0.0

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since we allow kfd and graphic operate on same GPU VM to have interoperation
between them GPU VM may have been used by graphic vm operations before kfd turns
a GPU VM into a compute VM. Remove vm clean checking at amdgpu_vm_make_compute.

Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A number of users have reported that there are random hangs occurring
caused by PSR-SU specifically on panels that contain the parade 0803
TCON.  Users have been able to work around the issue by disabling PSR
entirely.

To avoid these hangs, disable PSR-SU when this TCON is found.

Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Suggested-by: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443


Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable GWS capable queue creation for forward
progress gaurantee on GFX 9.4.3.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is proved that insufficient LC_L1_INACTIVITY setting can cause audio
noise on some platform. With the LC_L1_INACTIVITY increased to 4ms, the
issue can be resolved.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This version brings along the following:
- DCN314 fixes
- DCN32x fixes
- New fast update sequence enablement
- DC mode clock switching enablement for DCN32x
- DP link loss fix
- New debugfs entry to set MST link settings

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- DC mode clock switch interface was previously only executed
  for DCN303. Enable it for DCN32x so that the interface is called
  correctly
- Assign function pointers for DCN32x that are used in the dc mode
  interface
- Update the dc mode interface to work generically for each ASIC
- In update_clocks, make sure to consider softmax if we're in DC mode

Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We don't check 128b132b-specific bits in LANE_ALIGN_STATUS_UPDATED DPCD
registers when parsing link loss status, which can cause us to miss a
link loss notification from some sinks.

[How]
Add a 128b132b-specific status bit check.

Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Correct setting is div by 2 for odm. Seamless odm transitions
are enabled with enable_dp_dig_pixel_rate_div_policy debug flag.

Fixes: a2c7356f

 ("drm/amd/display: fix pixel rate update sequence")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When using debugfs to change MST link settings, we need to wait until
the next stream update to apply the preferred link setting. So, trigger
a hotplug event right after the preferred link setting is applied.

Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
Having seamless boot on while forcing debug option ODM combine 2 to 1
will cause some corruptions because of some missing programmings.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Why:
Limiting clocks to DC mode max results in some
display modes to no longer be supported

How:
Disable the path that limits the clock values

Fixes: 3b718dca

 ("drm/amd/display: Filter out AC mode frequencies on DC mode systems")
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The new fast update sequence is now supported on some ASICs. So, enable
it by default for all applicable ASICs.

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Clear update flags so the next flip does not have any redundant
programming (if a subsequent flip does not have a stream or plane
update, the update flags are not cleared).

Fixes: 0baae624

 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Condition for programming manually trigger used the wrong pipe (always
used top pipe instead of the one we are iterating through).

Fixes: 0baae624

 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We are currently missing some ABM registers.

[How]
Add the missing registers to dce_abm.h.

Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sridevi Arvindekar <sridevi.arvindekar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Why:
Certain display configs resulted in underflow

How:
Add an entry containing all max DC clock timings

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]

We have to check if stream is properly initialized before calling
find_matching_pll(), otherwise we might end up trying to deferecence a
NULL pointer.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This partially reverts commit de231189

 ("drm/amd/display: Fix
possible underflow for displays with large vblank").

[Why]
The increased value of VBlankNomDefaultUS causes underflow at the
desktop of an IP KVM setup

[How]
Change the value from 800 back to 668

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit e383b127

.

Controling hubp power gating using the DMCUB isn't stable so we
are reverting this change to move control back into the driver.

Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
RCO is causing error messages on some DCN314 systems

[How]
Force disable RCO for DCN314

Fixes: 17fbdbda

 ("drm/amd/display: Enable dcn314 DPP RCO")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Power gating is causing error messages on some DCN314 systems

[How]
Force disable power gating for DCN314

Fixes: 4cc1cebe

 ("drm/amd/display: Re-enable DPP/HUBP Power Gating")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For SRIOV VF, no TMR needed.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After commit 8020f0f9

 ("drm/amd/amdgpu: enable W=1 for amdgpu"),
there is an instance of -Wunused-const-variable when CONFIG_DEBUG_FS is
disabled:

  drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_pm.c:38:34: error: unused variable 'clocks' [-Werror,-Wunused-const-variable]
     38 | static const struct cg_flag_name clocks[] = {
        |                                  ^
  1 error generated.

clocks is only used when CONFIG_DEBUG_FS is set, so move the definition
into the CONFIG_DEBUG_FS block right above its only usage to clear up
the warning.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>