- Sep 10, 2018
-
-
Hans Verkuil authored
Centralize setting the irq_request/release_resources callbacks in one function since we'll be adding more callbacks to that. Also fix the removal of the callback overrides: this should only be done if we actually installed our own callback there. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Hans Verkuil authored
GPIO drivers that do not use GPIOLIB_IRQCHIP can hook these into the irq_request_resource and irq_release_resource callbacks of the irq_chip so they correctly 'get' the module and lock the gpio line for IRQ use. This will simplify driver code. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Dan Carpenter authored
The problem is that if port == ARRAY_SIZE() and "gc == &epg->gc[port]" then that should be treated as invalid. Fixes: fd935fc4 ("gpio: ep93xx: Do not pingpong irq numbers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Colin Ian King authored
Currently the while loop checks for the end of the array using the size of egp->gc rather that the number of elements in the array, so fix this. Also, perform the array size check first as stylistically it is always good to bounds check on an array first before referencing the array (in this case, we're just computing the address of an element in an array so this is a moot point). Fixes: fd935fc4 ("gpio: ep93xx: Do not pingpong irq numbers") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Randy Dunlap authored
Fix kernel-doc warning for missing struct member 'request_key': ../include/linux/gpio/driver.h:142: warning: Function parameter or member 'request_key' not described in 'gpio_irq_chip' Fixes: 39c3fd58 ("kernel/irq: Extend lockdep class for request mutex") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The gpiolib cannot deduce the fact that every line is output by itself, implement a .get_direction() callback so we can inspect this. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
It's nice to use BIT() macros rather than open coding the same. It's good practice as sometimes people use BIT(31) and forget that the constant must be cast unsigned long. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Use the SPDX header to indicate the license for this driver. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
It's nice to be able to read back the direction of the GPIO line from the hardware so implement .get_direction() for twl4030. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Use the SPDX header to indicate the license for this driver. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Sep 04, 2018
-
-
Linus Walleij authored
This is a driver so include only <linux/gpio/driver.h>. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The TS5500 GPIO driver apparently supports platform data without making any use of it whatsoever. Delete this code, last chance to speak up if you think it is needed. Cc: kernel@savoirfairelinux.com Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Cut some boilerplate, use the SPDX license identifier. Cc: kernel@savoirfairelinux.com Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: kernel@savoirfairelinux.com Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The MXS driver was calling back into the GPIO API from its irqchip. This is not very elegant, as we are a driver, let's just shortcut back into the gpio_chip .get() function instead. This is a tricky case since the .get() callback is not in this file, instead assigned by bgpio_init(). Calling the function direcly in the gpio_chip is however the lesser evil. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
I'm tired of boilerplate, use the SPDX tag. Acked-by:
Andrew F. Davis <afd@ti.com> Reviewed-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
These are drivers so include only <linux/gpio/driver.h>. Acked-by:
Andrew F. Davis <afd@ti.com> Reviewed-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Aug 31, 2018
-
-
Andy Shevchenko authored
There are few Intel PMIC GPIO device drivers which I would like to review. Note, Intel MSIC is old system controller that based mostly on PMIC integrated in it. Thus, I included it as well. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Aug 30, 2018
-
-
Justin Chen authored
Sometimes we have empty banks within the GPIO block. This commit allows proper handling of 0 width GPIO banks. We handle 0 width GPIO banks by incrementing the bank and number of GPIOs, but not initializing them. This will mean a call into the non-existent GPIOs will return an error. Also remove "GPIO registered" dev print. This information is misleading since the incremented banks and gpio_base do not reflect the actual GPIOs that get initialized. We leave this information out since it is already printed with dev_dbg. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The FTGPIO010 has a debounce timer or rather prescaler that will affect interrupts fireing off the block. We can support this to get proper debounce on e.g. keypresses. Since the same prescaler is used across all GPIO lines of the silicon block, we need to bail out if the prescaler is already set and in use by another line. If the prescaler is already set to what we need, fine, we reuse it. This happens more often than not when the same debounce time is set for several GPIO keys, so we support that usecase easily with this code. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The GPIO silicon is clocked with a PCLK (peripheral clock) on all systems, however not all platforms model it and include it in e.g. the device tree, so add clock handling but make it optional so we bail out safely if it is e.g. always on. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Aug 29, 2018
-
-
Linus Walleij authored
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Robert Jarzmik authored
In the corner case where the gpio driver probe fails, for whatever reason, the suspend and resume handlers will still be called as they have to be registered as syscore operations. This applies as well when no probe was called while the driver has been built in the kernel. Nicolas tracked this in : https://bugzilla.kernel.org/show_bug.cgi?id=200905 Therefore, add a failsafe in these function, and test if a proper probe succeeded and the driver is functional. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Reported-by:
Nicolas Chauvet <kwizart@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Fabrizio Castro authored
Document Renesas' RZ/G2M (R8A774A1) GPIO blocks compatibility within the relevant dt-bindings. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so only include <linux/gpio/driver.h> Cc: Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
The pinctrl-ingenic driver is now handling the GPIO chips directly. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
Depending on MACH_INGENIC prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
Add support for the JZ4725B and compatible SoCs from Ingenic. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
This allows to read from debugfs whether the GPIOs requested are set as input or output. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
Merge the code of the gpio-ingenic driver into the pinctrl-ingenic driver. The reason behind this, is that the same hardware block handles both pin config / muxing and GPIO. ingenic_gpio_probe() have been marked as __init, but for the most part, the code is the exact same as what it was in the gpio-ingenic driver. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
By using platform_driver_probe() instead of platform_driver_register(), we can mark the ingenic_pinctrl_probe() function as __init. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
Using postcore_initcall() makes the driver try to initialize way too early. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Paul Cercueil authored
The pinctrl-ingenic driver now supports the JZ4725B SoC. Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic driver is now responsible for providing the GPIO functionality. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Michael Hennerich authored
no functional changes Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Biju Das authored
Update the DT bindings documentation with the optional gpio-reserved-ranges properties. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Biju Das authored
GPIO hole is present in RZ/G1C SoC. Valid GPIO pins on bank3 are in the range GP3_0 to GP3_16 and GP3_27 to GP3_29. The GPIO pins between GP3_17 to GP3_26 are unused. Add support for handling unused GPIO's. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
We can quite easily switch banks/ports A and B to use GPIOLIB_IRQCHIP which is code that will be more careful about handling interrupt descriptors and use a proper irqdomain for translating the IRQs. This cuts down some code in favor of using the implementation inside gpiolib. Acked-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-