Remove NULL checks before vfree() to fix these warnings:
./drivers/lightnvm/pblk-gc.c:27:2-7: WARNING: NULL check before some
freeing functions is not needed.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe updates from Christoph:

"nvme updates for 5.12:

 - fix multipath handling of ->queue_rq errors (Chao Leng)
 - nvmet cleanups (Chaitanya Kulkarni)
 - add a quirk for buggy Amazon controller (Filippo Sironi)
 - avoid devm allocations in nvme-hwmon that don't interact well with
   fabrics (Hannes Reinecke)
 - sysfs cleanups (Jiapeng Chong)
 - fix nr_zones for multipath (Keith Busch)
 - nvme-tcp crash fix for no-data commands (Sagi Grimberg)
 - nvmet-tcp fixes (Sagi Grimberg)
 - add a missing __rcu annotation (me)"

* tag 'nvme-5.12-2021-02-11' of git://git.infradead.org/nvme: (22 commits)
  nvme-tcp: fix crash triggered with a dataless request submission
  nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
  nvme-hwmon: rework to avoid devm allocation
  nvmet: remove else at the end of the function
  nvmet: add nvmet_req_subsys() helper
  nvmet: use min of device_path and disk len
  nvmet: use invalid cmd opcode helper
  nvmet: use invalid cmd opcode helper
  nvmet: add helper to report invalid opcode
  nvmet: remove extra variable in id-ns handler
  nvmet: make nvmet_find_namespace() req based
  nvmet: return uniform error for invalid ns
  nvmet: set status to 0 in case for invalid nsid
  nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
  nvme-multipath: set nr_zones for zoned namespaces
  nvmet-tcp: fix potential race of tcp socket closing accept_work
  nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUs
  nvme-rdma: handle nvme_rdma_post_send failures better
  nvme-fabrics: avoid double completions in nvmf_fail_nonready_command
  nvme: introduce a nvme_host_path_error helper
  ...

write-zeros has a bio, but does not have any data buffers associated
with it. Hence should not initialize the request iter for it (which
attempts to reference the bi_io_vec (and crash).
--
 run blktests nvme/012 at 2021-02-05 21:53:34
 BUG: kernel NULL pointer dereference, address: 0000000000000008
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 15 PID: 12069 Comm: kworker/15:2H Tainted: G S        I       5.11.0-rc6+ #1
 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020
 Workqueue: kblockd blk_mq_run_work_fn
 RIP: 0010:nvme_tcp_init_iter+0x7d/0xd0 [nvme_tcp]
 RSP: 0018:ffffbd084447bd18 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffffa0bba9f3ce80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000002000000
 RBP: ffffa0ba8ac6fec0 R08: 0000000002000000 R09: 0000000000000000
 R10: 0000000002800809 R11: 0000000000000000 R12: 0000000000000000
 R13: ffffa0bba9f3cf90 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffffa0c9ff9c0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000008 CR3: 00000001c9c6c005 CR4: 00000000007706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 PKRU: 55555554
 Call Trace:
  nvme_tcp_queue_rq+0xef/0x330 [nvme_tcp]
  blk_mq_dispatch_rq_list+0x11c/0x7c0
  ? blk_mq_flush_busy_ctxs+0xf6/0x110
  __blk_mq_sched_dispatch_requests+0x12b/0x170
  blk_mq_sched_dispatch_requests+0x30/0x60
  __blk_mq_run_hw_queue+0x2b/0x60
  process_one_work+0x1cb/0x360
  ? process_one_work+0x360/0x360
  worker_thread+0x30/0x370
  ? process_one_work+0x360/0x360
  kthread+0x116/0x130
  ? kthread_park+0x80/0x80
  ret_from_fork+0x1f/0x30
--

Fixes: cb9b870f

 ("nvme-tcp: fix wrong setting of request iov_iter")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

As started by commit 05a5f51c

 ("Documentation: Replace lkml.org
links with lore"), replace lkml.org links with lore to better use a
single source that's more likely to stay available long-term.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Signed-off-by: Liao Pingfang <winndows@163.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Some Amazon NVMe controllers do not follow the NVMe specification
and are limited to 48-bit DMA addresses.  Add a quirk to force
bounce buffering if needed and limit the IOVA allocation for these
devices.

This affects all current Amazon NVMe controllers that expose EBS
volumes (0x0061, 0x0065, 0x8061) and local instance storage
(0xcd00, 0xcd01, 0xcd02).

Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The original design to use device-managed resource allocation
doesn't really work as the NVMe controller has a vastly different
lifetime than the hwmon sysfs attributes, causing warning about
duplicate sysfs entries upon reconnection.
This patch reworks the hwmon allocation to avoid device-managed
resource allocation, and uses the NVMe controller as parent for
the sysfs attributes.

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Enzo Matsumiya <ematsumiya@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The function nvmet_parse_io_cmd() returns value from
nvmet_file_parse_io_cmd() or nvmet_bdev_parse_io_cmd() based on which
backend is set for the request. Remove the else and just return the
value from nvmet_bdev_parse_io_cmd().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Just like what we have to get the passthru ctrl from the req, add an
helper to get the subsystem associated with the nvmet_req() instead
of open coding the chain of structures.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In function __assign_req_name() instead of using the DEVICE_NAME_LEN in
strncpy() use min of DISK_NAME_LEN and strlen(req->ns->device_path).

This is needed to turn off the following warnings:-

In file included from drivers/nvme/target/core.c:14:
In function ‘__assign_req_name’,
    inlined from ‘trace_event_raw_event_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
    inlined from ‘perf_trace_nvmet_req_complete’ at drivers/nvme/target/./trace.h:100:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
    inlined from ‘perf_trace_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
    inlined from ‘trace_event_raw_event_nvmet_req_complete’ at drivers/nvme/target/./trace.h:100:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(name, req->ns->device_path, DISK_NAME_LEN);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.

Use the previously introduced helper in the passthru backend to make the
error message uniform.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.

Use the previously introduced helper in file backend to reduce the
duplicate code and make the error message uniform.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.

Add an helper and use it in block device backend to keep the code
and error message uniform.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

In nvmet_execute_identify_ns() local variable ctrl is accessed only in
one place, remove that and directly use it from nvmet_req->sq->ctrl.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The six callers of nvmet_find_namespace() duplicate the error log page
update and status setting code for each call on failure.

All callers are nvmet requests based functions, so we can pass req
to the nvmet_find_namesapce() & derive ctrl from req, that'll allow us
to update the error log page in nvmet_find_namespace(). Now that we
pass the request we can also get rid of the local variable in
nvmet_find_namespace() and use the req->ns and return the error code.

Replace the ctrl parameter with nvmet_req for nvmet_find_namespace(),
centralize the error log page update for non allocated namesapces, and
return uniform error for non-allocated namespace.

The nvmet_find_namespace() takes nsid parameter which is from NVMe
commands structures such as get_log_page, identify, rw and common. All
these commands have same offset for the nsid field.

Derive nsid from req->cmd->common.nsid) & remove the extra parameter
from the nvmet_find_namespace().

Lastly now we associate the ns to the req parameter that we pass to the
nvmet_find_namespace(), rename nvmet_find_namespace() to
nvmet_req_find_ns().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

For nvmet_find_namespace() error case we have inconsistent error code
mapping in the function nvmet_get_smart_log_nsid() and
nvmet_set_feat_write_protect().

There is no point in retrying for the invalid namesapce from the host
side. Set the error code to the NVME_SC_INVALID_NS | NVME_SC_DNR which
matches what we have in nvmet_execute_identify_desclist().

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

For unallocated namespace in nvmet_execute_identify_ns() don't set the
status to NVME_SC_INVALID_NS, set it to zero.

Fixes: bffcd507

 ("nvmet: set right status on error in id-ns handler")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Make sparse happy after the recent conversion to RCU lookups.

Fixes: 4e2f02bf

 ("nvmet-fc: use RCU proctection for assoc_list")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: James Smart <james.smart@broadcom.com>

The bio based drivers only require the request_queue's nr_zones is set,
so set this field in the head if the namespace path is zoned.

Fixes: 240e6ee2

 ("nvme: support for zoned namespaces")
Reported-by: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When we accept a TCP connection and allocate an nvmet-tcp queue we should
make sure not to fully establish it or reference it as the connection may
be already closing, which triggers queue release work, which does not
fence against queue establishment.

In order to address such a race, we make sure to check the sk_state and
contain the queue reference to be done underneath the sk_callback_lock
such that the queue release work correctly fences against it.

Fixes: 872d26a3

 ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Elad Grupi <elad.grupi@dell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When a host sends multiple h2cdata PDUs for a single command, we
should verify the data digest calculation per PDU and not
per command.

Fixes: 872d26a3

 ("nvmet-tcp: add NVMe over TCP target driver")
Reported-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Tested-by: Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme_rdma_post_send failing is a path related error and should bounce
to another path when using nvme-multipath.  Call nvme_host_path_error
when nvme_rdma_post_send returns -EIO to ensure nvme_complete_rq gets
invoked to fail over to another path if there is one.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When reconnecting, the request may be completed with
NVME_SC_HOST_PATH_ERROR in nvmf_fail_nonready_command, which currently
set the state of the request to MQ_RQ_IN_FLIGHT before calling
nvme_complete_rq.  When this happens for a request that is freed by
the caller, such as nvme_submit_user_cmd, in the worst case the request
could be completed again in tear down process.

Instead of calling blk_mq_start_request from nvmf_fail_nonready_command,
just use the new nvme_host_path_error helper to complete the command
without starting it.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When using nvme native multipathing, if a path related error occurs
during ->queue_rq, the request needs to be completed with
NVME_SC_HOST_PATH_ERROR so that the request can be failed over.

Introduce a helper to complete the command from ->queue_rq in a wait
that invokes nvme_complete_rq.

Signed-off-by: Chao Leng <lengchao@huawei.com>
[hch: renamed, added a return value to clean up the callers a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme drivers need to set the state of request to MQ_RQ_COMPLETE when
directly complete request in queue_rq.
So add blk_mq_set_request_complete.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Fix the following coccicheck warning:

./drivers/nvme/host/core.c:3580:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3570:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3560:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:3526:8-16: WARNING: use scnprintf or sprintf.
./drivers/nvme/host/core.c:2833:8-16: WARNING: use scnprintf or sprintf.

Reported-by: Abaci <Robot&lt;abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is potentially long running and not latency sensitive, let's get
it out of the way of other latency sensitive events.

As observed in the previous commit, the `system_wq` comes easily
congested by bcache, and this fixes a few more stalls I was observing
every once in a while.

Let's not make this `WQ_MEM_RECLAIM` as it showed to reduce performance
of boot and file system operations in my tests. Also, without
`WQ_MEM_RECLAIM`, I no longer see desktop stalls. This matches the
previous behavior as `system_wq` also does no memory reclaim:

> // workqueue.c:
> system_wq = alloc_workqueue("events", 0, 0);

Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Before killing `btree_io_wq`, the queue was allocated using
`create_singlethread_workqueue()` which has `WQ_MEM_RECLAIM`. After
killing it, it no longer had this property but `system_wq` is not
single threaded.

Let's combine both worlds and make it multi threaded but able to
reclaim memory.

Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 56b30770.

With the btree using the `system_wq`, I seem to see a lot more desktop
latency than I should.

After some more investigation, it looks like the original assumption
of 56b30770

 no longer is true, and bcache has a very high potential of
congesting the `system_wq`. In turn, this introduces laggy desktop
performance, IO stalls (at least with btrfs), and input events may be
delayed.

So let's revert this. It's important to note that the semantics of
using `system_wq` previously mean that `btree_io_wq` should be created
before and destroyed after other bcache wqs to keep the same
assumptions.

Cc: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Should be `register_device_async`.

Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kai Krakow <kai@kaishome.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Current way to calculate the writeback rate only considered the
dirty sectors, this usually works fine when the fragmentation
is not high, but it will give us unreasonable small rate when
we are under a situation that very few dirty sectors consumed
a lot dirty buckets. In some case, the dirty bucekts can reached
to CUTOFF_WRITEBACK_SYNC while the dirty data(sectors) not even
reached the writeback_percent, the writeback rate will still
be the minimum value (4k), thus it will cause all the writes to be
stucked in a non-writeback mode because of the slow writeback.

We accelerate the rate in 3 stages with different aggressiveness,
the first stage starts when dirty buckets percent reach above
BCH_WRITEBACK_FRAGMENT_THRESHOLD_LOW (50), the second is
BCH_WRITEBACK_FRAGMENT_THRESHOLD_MID (57), the third is
BCH_WRITEBACK_FRAGMENT_THRESHOLD_HIGH (64). By default
the first stage tries to writeback the amount of dirty data
in one bucket (on average) in (1 / (dirty_buckets_percent - 50)) second,
the second stage tries to writeback the amount of dirty data in one bucket
in (1 / (dirty_buckets_percent - 57)) * 100 millisecond, the third
stage tries to writeback the amount of dirty data in one bucket in
(1 / (dirty_buckets_percent - 64)) millisecond.

the initial rate at each stage can be controlled by 3 configurable
parameters writeback_rate_fp_term_{low|mid|high}, they are by default
1, 10, 1000, the hint of IO throughput that these values are trying
to achieve is described by above paragraph, the reason that
I choose those value as default is based on the testing and the
production data, below is some details:

A. When it comes to the low stage, there is still a bit far from the 70
   threshold, so we only want to give it a little bit push by setting the
   term to 1, it means the initial rate will be 170 if the fragment is 6,
   it is calculated by bucket_size/fragment, this rate is very small,
   but still much reasonable than the minimum 8.
   For a production bcache with unheavy workload, if the cache device
   is bigger than 1 TB, it may take hours to consume 1% buckets,
   so it is very possible to reclaim enough dirty buckets in this stage,
   thus to avoid entering the next stage.

B. If the dirty buckets ratio didn't turn around during the first stage,
   it comes to the mid stage, then it is necessary for mid stage
   to be more aggressive than low stage, so i choose the initial rate
   to be 10 times more than low stage, that means 1700 as the initial
   rate if the fragment is 6. This is some normal rate
   we usually see for a normal workload when writeback happens
   because of writeback_percent.

C. If the dirty buckets ratio didn't turn around during the low and mid
   stages, it comes to the third stage, and it is the last chance that
   we can turn around to avoid the horrible cutoff writeback sync issue,
   then we choose 100 times more aggressive than the mid stage, that
   means 170000 as the initial rate if the fragment is 6. This is also
   inferred from a production bcache, I've got one week's writeback rate
   data from a production bcache which has quite heavy workloads,
   again, the writeback is triggered by the writeback percent,
   the highest rate area is around 100000 to 240000, so I believe this
   kind aggressiveness at this stage is reasonable for production.
   And it should be mostly enough because the hint is trying to reclaim
   1000 bucket per second, and from that heavy production env,
   it is consuming 50 bucket per second on average in one week's data.

Option writeback_consider_fragment is to control whether we want
this feature to be on or off, it's on by default.

Lastly, below is the performance data for all the testing result,
including the data from production env:
https://docs.google.com/document/d/1AmbIEa_2MhB9bqhC3rfga9tp7n9YX9PLn0jSUxscVW0/edit?usp=sharing

Signed-off-by: dongdong tao <dongdong.tao@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The STEC S1220 PCIe SSD cards are EOL since 2014 and not supported by
the vendor anymore. As the skd driver for this SSD is starting to cause
problems with improvements to the block layer, stop supporting it in
newer kernel versions.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.12/drivers

Pull MD fix from Song.

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid5: cast chunk_sectors to sector_t value

Pull floppy fix from Denis:

"Floppy patch for 5.12

- O_NDELAY/O_NONBLOCK fix for floppy from Jiri Kosina.
  libblkid is using O_NONBLOCK when probing devices.
  This leads to pollution of kernel log with error
  messages from floppy driver. Also the driver fails
  a mount prior to being opened without O_NONBLOCK
  at least once. The patch fixes the issues."

Signed-off-by: Denis Efremov <efremov@linux.com>

* tag 'floppy-for-5.12' of https://github.com/evdenis/linux-floppy:
  floppy: reintroduce O_NDELAY fix

This issue was originally fixed in 09954bad ("floppy: refactor open()
flags handling").

The fix as a side-effect, however, introduce issue for open(O_ACCMODE)
that is being used for ioctl-only open. I wrote a fix for that, but
instead of it being merged, full revert of 09954bad was performed,
re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again.

This is a forward-port of the original fix to current codebase; the
original submission had the changelog below:

====
Commit 09954bad

 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm
Cc: stable@vger.kernel.org
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-and-tested-by: Kurt Garloff <kurt@garloff.de>
Fixes: 09954bad ("floppy: refactor open() flags handling")
Fixes: f2791e7e

 ("Revert "floppy: refactor open() flags handling"")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Denis Efremov <efremov@linux.com>

Currently, raid5 calculates dev_sectors from chunk_sectors without
proper cast, which is problematic.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Pull NVMe updates from Christoph:

"nvme updates for 5.12:

 - failed reconnect fixes (Chao Leng)
 - various tracing improvements (Michal Krakowiak, Johannes Thumshirn)
 - switch the nvmet-fc assoc_list to use RCU protection (Leonid Ravich)
 - resync the status codes with the latest spec (Max Gurtovoy)
 - minor nvme-tcp improvements (Sagi Grimberg)
 - various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya Kulkarni,
   Israel Rukshin)"

* tag 'nvme-5.21-2020-02-02' of git://git.infradead.org/nvme: (22 commits)
  nvme-tcp: use cancel tagset helper for tear down
  nvme-rdma: use cancel tagset helper for tear down
  nvme-tcp: add clean action for failed reconnection
  nvme-rdma: add clean action for failed reconnection
  nvme-core: add cancel tagset helpers
  nvme-core: get rid of the extra space
  nvme: add tracing of zns commands
  nvme: parse format nvm command details when tracing
  nvme: update enumerations for status codes
  nvmet: add lba to sect conversion helpers
  nvmet: remove extra variable in identify ns
  nvmet: remove extra variable in id-desclist
  nvmet: remove extra variable in smart log nsid
  nvme: refactor ns->ctrl by request
  nvme-tcp: pass multipage bvec to request iov_iter
  nvme-tcp: get rid of unused helper function
  nvme-tcp: fix wrong setting of request iov_iter
  nvme: support command retry delay for admin command
  nvme: constify static attribute_group structs
  nvmet-fc: use RCU proctection for assoc_list
  ...

Use nvme_cancel_tagset and nvme_cancel_admin_tagset to clean code for
tear down process.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Use nvme_cancel_tagset and nvme_cancel_admin_tagset to clean code for
tear down process.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>