- Apr 14, 2023
-
-
Gwangun Jung authored
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device. The MTU of the loopback device can be set up to 2^31-1. As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX. Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors. The following reports a oob access: [ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313) [ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301 [ 84.583686] [ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1 [ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 84.584644] Call Trace: [ 84.584787] <TASK> [ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) [ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) [ 84.585570] kasan_report (mm/kasan/report.c:538) [ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313) [ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255) [ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776) [ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212) [ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228) [ 84.589460] ip_output (net/ipv4/ip_output.c:430) [ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606) [ 84.590285] raw_sendmsg (net/ipv4/raw.c:649) [ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747) [ 84.592084] __sys_sendto (net/socket.c:2142) [ 84.593306] __x64_sys_sendto (net/socket.c:2150) [ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [ 84.594070] RIP: 0033:0x7fe568032066 [ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c Code starting with the faulting instruction =========================================== [ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066 [ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003 [ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010 [ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001 [ 84.596218] </TASK> [ 84.596295] [ 84.596351] Allocated by task 291: [ 84.596467] kasan_save_stack (mm/kasan/common.c:46) [ 84.596597] kasan_set_track (mm/kasan/common.c:52) [ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384) [ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974) [ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938) [ 84.597100] qdisc_create (net/sched/sch_api.c:1244) [ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680) [ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174) [ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574) [ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365) [ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942) [ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747) [ 84.598016] ____sys_sendmsg (net/socket.c:2501) [ 84.598147] ___sys_sendmsg (net/socket.c:2557) [ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586) [ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) [ 84.598688] [ 84.598744] The buggy address belongs to the object at ffff88810f674000 [ 84.598744] which belongs to the cache kmalloc-8k of size 8192 [ 84.599135] The buggy address is located 2664 bytes to the right of [ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0) [ 84.599544] [ 84.599598] The buggy address belongs to the physical page: [ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670 [ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000 [ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000 [ 84.601009] page dumped because: kasan: bad access detected [ 84.601187] [ 84.601241] Memory state around the buggy address: [ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602069] ^ [ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 84.602693] ================================================================== [ 84.602924] Disabling lock debugging due to kernel taint Fixes: 3015f3d2 ("pkt_sched: enable QFQ to support TSO/GSO") Reported-by:
Gwangun Jung <exsociety@gmail.com> Signed-off-by:
Gwangun Jung <exsociety@gmail.com> Acked-by:
Jamal Hadi <Salim<jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, and bluetooth. Not all that quiet given spring celebrations, but "current" fixes are thinning out, which is encouraging. One outstanding regression in the mlx5 driver when using old FW, not blocking but we're pushing for a fix. Current release - new code bugs: - eth: enetc: workaround for unresponsive pMAC after receiving express traffic Previous releases - regressions: - rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the pid/seq fields 0 for backward compatibility Previous releases - always broken: - sctp: fix a potential overflow in sctp_ifwdtsn_skip - mptcp: - use mptcp_schedule_work instead of open-coding it and make the worker check stricter, to avoid scheduling work on closed sockets - fix NULL pointer dereference on fastopen early fallback - skbuff: fix memory corruption due to a race between skb coalescing and releasing clones confusing page_pool reference counting - bonding: fix neighbor solicitation validation on backup slaves - bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp - bpf: arm64: fixed a BTI error on returning to patched function - openvswitch: fix race on port output leading to inf loop - sfp: initialize sfp->i2c_block_size at sfp allocation to avoid returning a different errno than expected - phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove - Bluetooth: fix printing errors if LE Connection times out - Bluetooth: assorted UaF, deadlock and data race fixes - eth: macb: fix memory corruption in extended buffer descriptor mode Misc: - adjust the XDP Rx flow hash API to also include the protocol layers over which the hash was computed" * tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type veth: bpf_xdp_metadata_rx_hash add xdp rss hash type mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type xdp: rss hash types representation selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters skbuff: Fix a race between coalescing and releasing SKBs net: macb: fix a memory corruption in extended buffer descriptor mode selftests: add the missing CONFIG_IP_SCTP in net config udp6: fix potential access to stale information selftests: openvswitch: adjust datapath NL message declaration selftests: mptcp: userspace pm: uniform verify events mptcp: fix NULL pointer dereference on fastopen early fallback mptcp: stricter state check in mptcp_worker mptcp: use mptcp_schedule_work instead of open-coding it net: enetc: workaround for unresponsive pMAC after receiving express traffic sctp: fix a potential overflow in sctp_ifwdtsn_skip net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume() rtnetlink: Restore RTM_NEW/DELLINK notification behavior net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Fix interaction between fw_devlink and DT overlays causing devices to not be probed - Fix the compatible string for loongson,cpu-interrupt-controller * tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: treewide: Fix probing of devices in DT overlays dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fix from Linus Walleij: "This is just a revert of the AMD fix, because the fix broke some laptops. We are working on a proper solution" * tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: amd: Disable and mask interrupts on resume"
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Daniel Vetter: - two fbcon regressions - amdgpu: dp mst, smu13 - i915: dual link dsi for tgl+ - armada, nouveau, drm/sched, fbmem * tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm: fbcon: set_con2fb_map needs to set con2fb_map! fbcon: Fix error paths in set_con2fb_map drm/amd/pm: correct the pcie link state check for SMU13 drm/amd/pm: correct SMU13.0.7 max shader clock reporting drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings drm/amd/display: Pass the right info to drm_dp_remove_payload drm/armada: Fix a potential double free in an error handling path fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace drm/nouveau/fb: add missing sysmen flush callbacks drm/i915/dsi: fix DSS CTL register offsets for TGL+ drm/scheduler: Fix UAF race in drm_sched_entity_push_job()
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-04-13 We've added 6 non-merge commits during the last 1 day(s) which contain a total of 14 files changed, 205 insertions(+), 38 deletions(-). The main changes are: 1) One late straggler fix on the XDP hints side which fixes bpf_xdp_metadata_rx_hash kfunc API before the release goes out in order to provide information on the RSS hash type, from Jesper Dangaard Brouer. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type veth: bpf_xdp_metadata_rx_hash add xdp rss hash type mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type xdp: rss hash types representation selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters ==================== Link: https://lore.kernel.org/r/20230413192939.10202-1-daniel@iogearbox.net Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://anongit.freedesktop.org/drm/drm-miscDaniel Vetter authored
Short summary of fixes pull: * armada: Fix double free * fb: Clear FB_ACTIVATE_KD_TEXT in ioctl * nouveau: Add missing callbacks * scheduler: Fix use-after-free error Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230413184233.GA8148@linux-uq9g
-
Alexei Starovoitov authored
Jesper Dangaard Brouer says: ==================== Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value, but doesn't provide information on the RSS hash type (part of 6.3-rc). This patchset proposal is to change the function call signature via adding a pointer value argument for providing the RSS hash type. Patchset also removes all bpf_printk's from xdp_hw_metadata program that we expect driver developers to use. Instead counters are introduced for relaying e.g. skip and fail info. ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Update BPF selftests to use the new RSS type argument for kfunc bpf_xdp_metadata_rx_hash. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoul Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via matching individual Completion Queue Entry (CQE) status bits. Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132893562.340624.12779118462402031248.stgit@firesoul Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type. The veth driver currently only support XDP-hints based on SKB code path. The SKB have lost information about the RSS hash type, by compressing the information down to a single bitfield skb->l4_hash, that only knows if this was a L4 hash value. In preparation for veth, the xdp_rss_hash_type have an L4 indication bit that allow us to return a meaningful L4 indication when working with SKB based packets. Fixes: 306531f0 ("veth: Support RX XDP metadata") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132893055.340624.16209448340644513469.stgit@firesoul Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via mapping table. The mlx5 hardware can also identify and RSS hash IPSEC. This indicate hash includes SPI (Security Parameters Index) as part of IPSEC hash. Extend xdp core enum xdp_rss_hash_type with IPSEC hash type. Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoul Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
The RSS hash type specifies what portion of packet data NIC hardware used when calculating RSS hash value. The RSS types are focused on Internet traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4 primarily TCP vs UDP, but some hardware supports SCTP. Hardware RSS types are differently encoded for each hardware NIC. Most hardware represent RSS hash type as a number. Determining L3 vs L4 often requires a mapping table as there often isn't a pattern or sorting according to ISO layer. The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that contains both BITs for the L3/L4 types, and combinations to be used by drivers for their mapping tables. The enum xdp_rss_type_bits get exposed to BPF via BTF, and it is up to the BPF-programmer to match using these defines. This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding a pointer value argument for provide the RSS hash type. Change signature for all xmo_rx_hash calls in drivers to make it compile. The RSS type implementations for each driver comes as separate patches. Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoul Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Jesper Dangaard Brouer authored
The tool xdp_hw_metadata can be used by driver developers implementing XDP-hints metadata kfuncs. Remove all bpf_printk calls, as the tool already transfers all the XDP-hints related information via metadata area to AF_XDP userspace process. Add counters for providing remaining information about failure and skipped packet events. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132891533.340624.7313781245316405141.stgit@firesoul Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Vetter authored
I got really badly confused in d443d938 ("fbcon: move more common code into fb_open()") because we set the con2fb_map before the failure points, which didn't look good. But in trying to fix that I moved the assignment into the wrong path - we need to do it for _all_ vc we take over, not just the first one (which additionally requires the call to con2fb_acquire_newinfo). I've figured this out because of a KASAN bug report, where the fbcon_registered_fb and fbcon_display arrays went out of sync in fbcon_mode_deleted() because the con2fb_map pointed at the old fb_info, but the modes and everything was updated for the new one. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Helge Deller <deller@gmx.de> Tested-by:
Xingyuan Mo <hdthky0@gmail.com> Fixes: d443d938 ("fbcon: move more common code into fb_open()") Reported-by:
Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.19+
-
Daniel Vetter authored
This is a regressoin introduced in b07db395 ("fbcon: Ditch error handling for con2fb_release_oldinfo"). I failed to realize what the if (!err) checks. The mentioned commit was dropping the con2fb_release_oldinfo() return value but the if (!err) was also checking whether the con2fb_acquire_newinfo() function call above failed or not. Fix this with an early return statement. Note that there's still a difference compared to the orginal state of the code, the below lines are now also skipped on error: if (!search_fb_in_map(info_idx)) info_idx = newidx; These are only needed when we've actually thrown out an old fb_info from the console mappings, which only happens later on. Also move the fbcon_add_cursor_work() call into the same if block, it's all protected by console_lock so doesn't matter when we set up the blinking cursor delayed work anyway. This further simplifies the control flow and allows us to ditch the found local variable. v2: Clarify commit message (Javier) Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Helge Deller <deller@gmx.de> Tested-by:
Xingyuan Mo <hdthky0@gmail.com> Fixes: b07db395 ("fbcon: Ditch error handling for con2fb_release_oldinfo") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xingyuan Mo <hdthky0@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.19+
-
Liang Chen authored
Commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment recycling") allowed coalescing to proceed with non page pool page and page pool page when @from is cloned, i.e. to->pp_recycle --> false from->pp_recycle --> true skb_cloned(from) --> true However, it actually requires skb_cloned(@from) to hold true until coalescing finishes in this situation. If the other cloned SKB is released while the merging is in process, from_shinfo->nr_frags will be set to 0 toward the end of the function, causing the increment of frag page _refcount to be unexpectedly skipped resulting in inconsistent reference counts. Later when SKB(@to) is released, it frees the page directly even though the page pool page is still in use, leading to use-after-free or double-free errors. So it should be prohibited. The double-free error message below prompted us to investigate: BUG: Bad page state in process swapper/1 pfn:0e0d1 page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x2 pfn:0xe0d1 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000 raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+ Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_pcp_prepare+0x260/0x2f0 free_unref_page+0x20/0x1c0 skb_release_data+0x10b/0x1a0 napi_consume_skb+0x56/0x150 net_rx_action+0xf0/0x350 ? __napi_schedule+0x79/0x90 __do_softirq+0xc8/0x2b1 __irq_exit_rcu+0xb9/0xf0 common_interrupt+0x82/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0xb/0x20 Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool") Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Roman Gushchin authored
For quite some time we were chasing a bug which looked like a sudden permanent failure of networking and mmc on some of our devices. The bug was very sensitive to any software changes and even more to any kernel debug options. Finally we got a setup where the problem was reproducible with CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma: [ 16.992082] ------------[ cut here ]------------ [ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes] [ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900 [ 17.018977] Modules linked in: xxxxx [ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28 [ 17.045345] Hardware name: xxxxx [ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO) [ 17.054322] pc : check_unmap+0x6a0/0x900 [ 17.058243] lr : check_unmap+0x6a0/0x900 [ 17.062163] sp : ffffffc010003c40 [ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c [ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800 [ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8 [ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750 [ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000 [ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010 [ 17.097343] x17: 0000000000000000 x16: 0000000000000000 [ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720 [ 17.107959] x13: 0720072007200720 x12: 0720072007200720 [ 17.113261] x11: 0720072007200720 x10: 0720072007200720 [ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d [ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098 [ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370 [ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000 [ 17.145082] Call trace: [ 17.147524] check_unmap+0x6a0/0x900 [ 17.151091] debug_dma_unmap_page+0x88/0x90 [ 17.155266] gem_rx+0x114/0x2f0 [ 17.158396] macb_poll+0x58/0x100 [ 17.161705] net_rx_action+0x118/0x400 [ 17.165445] __do_softirq+0x138/0x36c [ 17.169100] irq_exit+0x98/0xc0 [ 17.172234] __handle_domain_irq+0x64/0xc0 [ 17.176320] gic_handle_irq+0x5c/0xc0 [ 17.179974] el1_irq+0xb8/0x140 [ 17.183109] xiic_process+0x5c/0xe30 [ 17.186677] irq_thread_fn+0x28/0x90 [ 17.190244] irq_thread+0x208/0x2a0 [ 17.193724] kthread+0x130/0x140 [ 17.196945] ret_from_fork+0x10/0x20 [ 17.200510] ---[ end trace 7240980785f81d6f ]--- [ 237.021490] ------------[ cut here ]------------ [ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b [ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240 [ 237.041802] Modules linked in: xxxxx [ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28 [ 237.068941] Hardware name: xxxxx [ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 237.077900] pc : add_dma_entry+0x214/0x240 [ 237.081986] lr : add_dma_entry+0x214/0x240 [ 237.086072] sp : ffffffc010003c30 [ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00 [ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0 [ 237.099987] x25: 0000000000000002 x24: 0000000000000000 [ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00 [ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600 [ 237.115897] x19: 00000000ffffffef x18: 0000000000000010 [ 237.121201] x17: 0000000000000000 x16: 0000000000000000 [ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720 [ 237.131807] x13: 0720072007200720 x12: 0720072007200720 [ 237.137111] x11: 0720072007200720 x10: 0720072007200720 [ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259 [ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000 [ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001 [ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007 [ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000 [ 237.168932] Call trace: [ 237.171373] add_dma_entry+0x214/0x240 [ 237.175115] debug_dma_map_page+0xf8/0x120 [ 237.179203] gem_rx_refill+0x190/0x280 [ 237.182942] gem_rx+0x224/0x2f0 [ 237.186075] macb_poll+0x58/0x100 [ 237.189384] net_rx_action+0x118/0x400 [ 237.193125] __do_softirq+0x138/0x36c [ 237.196780] irq_exit+0x98/0xc0 [ 237.199914] __handle_domain_irq+0x64/0xc0 [ 237.204000] gic_handle_irq+0x5c/0xc0 [ 237.207654] el1_irq+0xb8/0x140 [ 237.210789] arch_cpu_idle+0x40/0x200 [ 237.214444] default_idle_call+0x18/0x30 [ 237.218359] do_idle+0x200/0x280 [ 237.221578] cpu_startup_entry+0x20/0x30 [ 237.225493] rest_init+0xe4/0xf0 [ 237.228713] arch_call_rest_init+0xc/0x14 [ 237.232714] start_kernel+0x47c/0x4a8 [ 237.236367] ---[ end trace 7240980785f81d70 ]--- Lars was fast to find an explanation: according to the datasheet bit 2 of the rx buffer descriptor entry has a different meaning in the extended mode: Address [2] of beginning of buffer, or in extended buffer descriptor mode (DMA configuration register [28] = 1), indicates a valid timestamp in the buffer descriptor entry. The macb driver didn't mask this bit while getting an address and it eventually caused a memory corruption and a dma failure. The problem is resolved by explicitly clearing the problematic bit if hw timestamping is used. Fixes: 7b429614 ("net: macb: Add support for PTP timestamps in DMA descriptors") Signed-off-by:
Roman Gushchin <roman.gushchin@linux.dev> Co-developed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Xin Long authored
The selftest sctp_vrf needs CONFIG_IP_SCTP set in config when building the kernel, so add it. Fixes: a61bd7b9 ("selftests: add a selftest for sctp vrf") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
lena wang reported an issue caused by udpv6_sendmsg() mangling msg->msg_name and msg->msg_namelen, which are later read from ____sys_sendmsg() : /* * If this is sendmmsg() and sending to current destination address was * successful, remember it. */ if (used_address && err >= 0) { used_address->name_len = msg_sys->msg_namelen; if (msg_sys->msg_name) memcpy(&used_address->name, msg_sys->msg_name, used_address->name_len); } udpv6_sendmsg() wants to pretend the remote address family is AF_INET in order to call udp_sendmsg(). A fix would be to modify the address in-place, instead of using a local variable, but this could have other side effects. Instead, restore initial values before we return from udpv6_sendmsg(). Fixes: c71d8ebe ("net: Fix security_socket_sendmsg() bypass problem.") Reported-by:
lena wang <lena.wang@mediatek.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Aaron Conole authored
The netlink message for creating a new datapath takes an array of ports for the PID creation. This shouldn't cause much issue but correct it for future cases where we need to do decode of datapath information that could include the per-cpu PID map. Fixes: 25f16c87 ("selftests: add openvswitch selftest suite") Signed-off-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: more fixes for 6.3 Patch 1 avoids scheduling the MPTCP worker on a closed socket on some edge cases. It fixes issues that can be visible from v5.11. Patch 2 makes sure the MPTCP worker doesn't try to manipulate disconnected sockets. This is also a fix for an issue that can be visible from v5.11. Patch 3 fixes a NULL pointer dereference when MPTCP FastOpen is used and an early fallback is done. A fix for v6.2. Patch 4 improves the stability of the userspace PM selftest for a subtest added in v6.2. ==================== Link: https://lore.kernel.org/r/20230411-upstream-net-20230411-mptcp-fixes-v1-0-ca540f3ef986@tessares.net Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
Simply adding a "sleep" before checking something is usually not a good idea because the time that has been picked can not be enough or too much. The best is to wait for events with a timeout. In this selftest, 'sleep 0.5' is used more than 40 times. It is always used before calling a 'verify_*' function except for this verify_listener_events which has been added later. At the end, using all these 'sleep 0.5' seems to work: the slow CIs don't complain so far. Also because it doesn't take too much time, we can just add two more 'sleep 0.5' to uniform what is done before calling a 'verify_*' function. For the same reasons, we can also delay a bigger refactoring to replace all these 'sleep 0.5' by functions waiting for events instead of waiting for a fix time and hope for the best. Fixes: 6c73008a ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
In case of early fallback to TCP, subflow_syn_recv_sock() deletes the subflow context before returning the newly allocated sock to the caller. The fastopen path does not cope with the above unconditionally dereferencing the subflow context. Fixes: 36b122ba ("mptcp: add subflow_v(4,6)_send_synack()") Cc: stable@vger.kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
As reported by Christoph, the mptcp protocol can run the worker when the relevant msk socket is in an unexpected state: connect() // incoming reset + fastclose // the mptcp worker is scheduled mptcp_disconnect() // msk is now CLOSED listen() mptcp_worker() Leading to the following splat: divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018 RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004 RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000 R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:262 [inline] __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline] mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390 worker_thread+0x5b/0x610 kernel/workqueue.c:2537 kthread+0x138/0x170 kernel/kthread.c:376 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> This change addresses the issue explicitly checking for bad states before running the mptcp worker. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Link: https://github.com/multipath-tcp/mptcp_net-next/issues/374 Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Beyond reducing code duplication this also avoids scheduling the mptcp_worker on a closed socket on some edge scenarios. The addressed issue is actually older than the blamed commit below, but this fix needs it as a pre-requisite. Fixes: ba8f48f7 ("mptcp: introduce mptcp_schedule_work") Cc: stable@vger.kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Apr 13, 2023
-
-
Daniel Vetter authored
Merge tag 'drm-intel-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.3-rc7: - Fix dual link DSI for TGL+ Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/877cugckzu.fsf@intel.com
-
Vladimir Oltean authored
I have observed an issue where the RX direction of the LS1028A ENETC pMAC seems unresponsive. The minimal procedure to reproduce the issue is: 1. Connect ENETC port 0 with a loopback RJ45 cable to one of the Felix switch ports (0). 2. Bring the ports up (MAC Merge layer is not enabled on either end). 3. Send a large quantity of unidirectional (express) traffic from Felix to ENETC. I tried altering frame size and frame count, and it doesn't appear to be specific to either of them, but rather, to the quantity of octets received. Lowering the frame count, the minimum quantity of packets to reproduce relatively consistently seems to be around 37000 frames at 1514 octets (w/o FCS) each. 4. Using ethtool --set-mm, enable the pMAC in the Felix and in the ENETC ports, in both RX and TX directions, and with verification on both ends. 5. Wait for verification to complete on both sides. 6. Configure a traffic class as preemptible on both ends. 7. Send some packets again. The issue is at step 5, where the verification process of ENETC ends (meaning that Felix responds with an SMD-R and ENETC sees the response), but the verification process of Felix never ends (it remains VERIFYING). If step 3 is skipped or if ENETC receives less traffic than approximately that threshold, the test runs all the way through (verification succeeds on both ends, preemptible traffic passes fine). If, between step 4 and 5, the step below is also introduced: 4.1. Disable and re-enable PM0_COMMAND_CONFIG bit RX_EN then again, the sequence of steps runs all the way through, and verification succeeds, even if there was the previous RX traffic injected into ENETC. Traffic sent *by* the ENETC port prior to enabling the MAC Merge layer does not seem to influence the verification result, only received traffic does. The LS1028A manual does not mention any relationship between PM0_COMMAND_CONFIG and MMCSR, and the hardware people don't seem to know for now either. The bit that is toggled to work around the issue is also toggled by enetc_mac_enable(), called from phylink's mac_link_down() and mac_link_up() methods - which is how the workaround was found: verification would work after a link down/up. Fixes: c7b9e808 ("net: enetc: add support for MAC Merge layer") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230411192645.1896048-1-vladimir.oltean@nxp.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Xin Long authored
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only checks the pos against the end of the chunk. However, the data left for the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference it as struct sctp_ifwdtsn_skip may cause coverflow. This patch fixes it by checking the pos against "the end of the chunk - sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to sctp_fwdtsn_skip. Fixes: 0fc2ea92 ("sctp: implement validate_ftsn for sctp_stream_interleave") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/2a71bffcd80b4f2c61fac6d344bb2f11c8fd74f7.1681155810.git.lucien.xin@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Daniel Vetter authored
Merge tag 'amd-drm-fixes-6.3-2023-04-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.3-2023-04-12: amdgpu: - SMU13 fixes - DP MST fix Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230412215637.7881-1-alexander.deucher@amd.com
-
Ziyang Xuan authored
Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230 qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230 qrtr_endpoint_post+0xf85/0x11b0 net/qrtr/af_qrtr.c:519 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 __netdev_alloc_skb+0x120/0x7d0 net/core/skbuff.c:630 qrtr_endpoint_post+0xbd/0x11b0 net/qrtr/af_qrtr.c:446 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because that skb->len requires at least sizeof(struct qrtr_ctrl_pkt) in qrtr_tx_resume(). And skb->len equals to size in qrtr_endpoint_post(). But size is less than sizeof(struct qrtr_ctrl_pkt) when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() under the syzbot scenario. This triggers the uninit variable access bug. Add size check when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() to fix the bug. Fixes: 5fdeb0d3 ("net: qrtr: Implement outgoing flow control") Reported-by:
<syzbot+4436c9630a45820fda76@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?id=c14607f0963d27d5a3d5f4c8639b500909e43540 Suggested-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230410012352.3997823-1-william.xuanziyang@huawei.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Martin Willi authored
The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136c ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by:
Martin Willi <martin@strongswan.org> Acked-by:
Guillaume Nault <gnault@redhat.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - kernel panic fix for intel-ish-hid driver (Tanu Malhotra) - buffer overflow fix in hid-sensor-custom driver (Todd Brandt) - two device specific quirks (Alessandro Manca, Philippe Troin) * tag 'for-linus-2023041201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: Fix kernel panic during warm reset HID: hid-sensor-custom: Fix buffer overrun in device name HID: topre: Add support for 87 keys Realforce R2 HID: add HP 13t-aw100 & 14t-ea100 digitizer battery quirks
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "A couple of fixes in apple driver, core and kernedoc fix for dmaengine subsystem: - apple admac driver fixes for current_tx, src_addr_widths and global' interrupt flags handling - xdma kerneldoc fix - core fix for use of devm_add_action_or_reset" * tag 'dmaengine-fix-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: apple-admac: Fix 'current_tx' not getting freed dmaengine: apple-admac: Set src_addr_widths capability dmaengine: apple-admac: Handle 'global' interrupt flags dmaengine: xilinx: xdma: Fix some kernel-doc comments dmaengine: Actually use devm_add_action_or_reset()
-
Evan Quan authored
Update the driver implementations to fit those data exposed by PMFW. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
-
Horatio Zhang authored
Correct the max shader clock reporting on SMU 13.0.7. Signed-off-by:
Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
-
Horatio Zhang authored
Correct the pstate standard/peak profiling mode clock settings for SMU13.0.7. Signed-off-by:
Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
-
Wayne Lin authored
[Why & How] drm_dp_remove_payload() interface was changed. Correct amdgpu dm code to pass the right parameter to the drm helper function. Reviewed-by:
Jerry Zuo <Jerry.Zuo@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
David Howells authored
Fix netfs_extract_iter_to_sg() for ITER_UBUF and ITER_IOVEC to set the size of the page to the part of the page extracted, not the remaining amount of data in the extracted page array at that point. This doesn't yet affect anything as cifs, the only current user, only passes in non-user-backed iterators. Fixes: 01858469 ("netfs: Add a function to extract an iterator into a scatterlist") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Cc: Steve French <sfrench@samba.org> Cc: Shyam Prasad N <nspmangalore@gmail.com> Cc: Rohith Surabattula <rohiths.msft@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Apr 12, 2023
-
-
Maarten Lankhorst authored
We were stuck on rc2, should at least attempt to track drm-fixes slightly. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-