Track per GROUP NUMBER how many write commands have been processed. Make
this information available in sysfs. Reset these statistics if any data
is written into the sysfs attribute.

Note: SCSI devices should only interpret the information in the GROUP
NUMBER field as a stream identifier if the ST_ENBLE bit has been set to
one. This patch follows a simpler approach: count the number of writes
per GROUP NUMBER whether or not the group number represents a stream
identifier.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-20-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Implement the GET STREAM STATUS SCSI command. Report that the first
five stream indexes correspond to permanent streams.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-19-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Implement an IO Advice Hints Grouping mode page with three permanent
streams. A permanent stream is a stream for which the device server does
not allow closing or otherwise modifying the configuration of that
stream. The stream identifier enable (ST_ENBLE) bit specifies whether
the stream identifier may be used in the GROUP NUMBER field of SCSI
WRITE commands.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-18-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Make the MODE SENSE response buffer larger and allocate it from the heap.
This patch prepares for adding support for the IO Advice Hints Grouping
mode page.

Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-17-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Move the subpage code checks into the switch statement to make it easier
to add support for new page code / subpage code combinations.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-16-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Instead of tracking whether or not the page code is valid in a boolean
variable, jump to error handling code if an unsupported page code is
encountered.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-15-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

>From SBC-5 r05:

"Reduced stream control:
a) reduces the maximum number of streams that the device server supports;
   and
b) increases the number of write commands that are able to specify a stream
   to be written in any write command that contains the GROUP NUMBER field
   in its CDB.

If the RSCS bit (see 6.6.5) is set to one, then the device server shall:
a) support per group stream identifier usage as described in 4.32.2;
b) support the IO Advice Hints Grouping mode page (see 6.5.7); and
c) set the MAXIMUM NUMBER OF STREAMS field (see 6.6.5) to a value that is
   less than 64.

Device servers that set the RSCS bit to one may support other features
(e.g., permanent streams (see 4.32.4)).

4.32.4 Permanent streams

A permanent stream is a stream for which the device server does not allow
closing or otherwise modifying the configuration of that stream. The PERM
bit (see 5.9.2.3) indicates whether a stream is a permanent stream. If a
STREAM CONTROL command (see 5.32) specifies the closing of a permanent
stream, the device server terminates that command with CHECK CONDITION
status instead of closing the specified stream. A permanent stream is always
an open stream. Device severs should assign the lowest numbered stream
identifiers to permanent streams."

Report that reduced stream control is supported.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-14-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

All VPD pages have the page code in byte one. Reduce code duplication by
storing the VPD page code once.

Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-13-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Recently T10 standardized SBC constrained streams. This mechanism allows to
pass data lifetime information to SCSI devices in the group number field.
Add support for translating write hint information into a permanent stream
number in the sd driver. Use WRITE(10) instead of WRITE(6) if data lifetime
information is present because the WRITE(6) command does not have a GROUP
NUMBER field.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Prepare for adding code that will query the I/O advice hints group
descriptors and for adding code that will retrieve the stream status.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Parse the Reduced Stream Control Supported (RSCS) bit from the block limits
extension VPD page. The RSCS bit is defined in SBC-5 r05
(https://www.t10.org/cgi-bin/ac.pl?t=f&f=sbc5r05.pdf).

Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240130214911.1863909-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Restore support for passing data lifetime information from filesystems to
block drivers. This patch reverts commit b179c98f ("block: Remove
request.write_hint") and commit c75e707f

 ("block: remove the
per-bio/request write hint").

This patch does not modify the size of struct bio because the new
bi_write_hint member fills a hole in struct bio. pahole reports the
following for struct bio on an x86_64 system with this patch applied:

        /* size: 112, cachelines: 2, members: 20 */
        /* sum members: 110, holes: 1, sum holes: 2 */
        /* last cacheline: 48 bytes */

Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-7-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Write hints applied with F_SET_RW_HINT on a block device affect the
block device inode only. Propagate these hints to the inode associated
with struct block_device because that is the inode used when writing
back dirty pages.

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-6-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Move enum rw_hint into a new header file to prepare for using this data
type in the block layer. Add the attribute __packed to reduce the space
occupied by instances of this data type from four bytes to one byte.
Change the data type of i_write_hint from u8 into enum rw_hint.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chao Yu <chao@kernel.org> # for the F2FS part
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-5-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Split fcntl_rw_hint() such that there is one helper function per fcntl.
Use READ_ONCE() and WRITE_ONCE() to access the i_write_hint member
instead of protecting such accesses with the inode lock. READ_ONCE() is
not used in I/O path code that reads i_write_hint. Users who want
F_SET_RW_HINT to affect I/O need to make sure that F_SET_RW_HINT has
completed before I/O is submitted that should use the configured write
hint.

Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-4-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

The code in fs/fcntl.c converts RWH_* constants to and from WRITE_LIFE_*
constants using casts. Verify at compile time that these casts will yield
the intended effect.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-3-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Reject values that are valid rw_hints after truncation but not before
truncation by passing an untruncated value to rw_hint_valid().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5657cb07

 ("fs/fcntl: use copy_to/from_user() for u64 types")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240202203926.2478590-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>