Skip to content
  1. Sep 02, 2020
    • Baolin Wang's avatar
      block: Remove a duplicative condition · 265600b7
      Baolin Wang authored
      
      
      Remove a duplicative condition to remove below cppcheck warnings:
      
      "warning: Redundant condition: sched_allow_merge. '!A || (A && B)' is
      equivalent to '!A || B' [redundantCondition]"
      
      Reported-by: default avatarkernel test robot <lkp@intel.com>
      Signed-off-by: default avatarBaolin Wang <baolin.wang@linux.alibaba.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      265600b7
    • Ritika Srivastava's avatar
      block: better deal with the delayed not supported case in blk_cloned_rq_check_limits · 8327cce5
      Ritika Srivastava authored
      
      
      If WRITE_ZERO/WRITE_SAME operation is not supported by the storage,
      blk_cloned_rq_check_limits() will return IO error which will cause
      device-mapper to fail the paths.
      
      Instead, if the queue limit is set to 0, return BLK_STS_NOTSUPP.
      BLK_STS_NOTSUPP will be ignored by device-mapper and will not fail the
      paths.
      
      Suggested-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarRitika Srivastava <ritika.srivastava@oracle.com>
      Reviewed-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8327cce5
    • Ritika Srivastava's avatar
      block: Return blk_status_t instead of errno codes · 143d2600
      Ritika Srivastava authored
      
      
      Replace returning legacy errno codes with blk_status_t in
      blk_cloned_rq_check_limits().
      
      Signed-off-by: default avatarRitika Srivastava <ritika.srivastava@oracle.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      143d2600
    • Khazhismel Kumykov's avatar
      block: grant IOPRIO_CLASS_RT to CAP_SYS_NICE · 9d3a39a5
      Khazhismel Kumykov authored
      
      
      CAP_SYS_ADMIN is too broad, and ionice fits into CAP_SYS_NICE's grouping.
      
      Retain CAP_SYS_ADMIN permission for backwards compatibility.
      
      Signed-off-by: default avatarKhazhismel Kumykov <khazhy@google.com>
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Acked-by: default avatarSerge Hallyn <serge@hallyn.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      9d3a39a5
    • Tejun Heo's avatar
      blk-iocost: update iocost_monitor.py · a7863b34
      Tejun Heo authored
      
      
      iocost went through significant internal changes. Update iocost_monitor.py
      accordingly.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      a7863b34
    • Tejun Heo's avatar
      blk-iocost: add three debug stat - cost.wait, indebt and indelay · f0bf84a5
      Tejun Heo authored
      
      
      These are really cheap to collect and can be useful in debugging iocost
      behavior. Add them as debug stats for now.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f0bf84a5
    • Tejun Heo's avatar
      blk-iocost: restore inuse update tracepoints · 04603755
      Tejun Heo authored
      
      
      Update and restore the inuse update tracepoints.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      04603755
    • Tejun Heo's avatar
      blk-iocost: implement vtime loss compensation · ac33e91e
      Tejun Heo authored
      
      
      When an iocg accumulates too much vtime or gets deactivated, we throw away
      some vtime, which lowers the overall device utilization. As the exact amount
      which is being thrown away is known, we can compensate by accelerating the
      vrate accordingly so that the extra vtime generated in the current period
      matches what got lost.
      
      This significantly improves work conservation when involving high weight
      cgroups with intermittent and bursty IO patterns.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      ac33e91e
    • Tejun Heo's avatar
      blk-iocost: halve debts if device stays idle · dda1315f
      Tejun Heo authored
      
      
      A low weight iocg can amass a large amount of debt, for example, when
      anonymous memory gets reclaimed aggressively. If the system has a lot of
      memory paired with a slow IO device, the debt can span multiple seconds or
      more. If there are no other subsequent IO issuers, the in-debt iocg may end
      up blocked paying its debt while the IO device is idle.
      
      This patch implements a mechanism to protect against such pathological
      cases. If the device has been sufficiently idle for a substantial amount of
      time, the debts are halved. The criteria are on the conservative side as we
      want to resolve the rare extreme cases without impacting regular operation
      by forgiving debts too readily.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      dda1315f
    • Tejun Heo's avatar
      blk-iocost: implement delay adjustment hysteresis · 5160a5a5
      Tejun Heo authored
      
      
      Curently, iocost syncs the delay duration to the outstanding debt amount,
      which seemed enough to protect the system from anon memory hogs. However,
      that was mostly because the delay calcuation was using hweight_inuse which
      quickly converges towards zero under debt for delay duration calculation,
      often pusnishing debtors overly harshly for longer than deserved.
      
      The previous patch fixed the delay calcuation and now the protection against
      anonymous memory hogs isn't enough because the effect of delay is indirect
      and non-linear and a huge amount of future debt can accumulate abruptly
      while unthrottled.
      
      This patch implements delay hysteresis so that delay is decayed
      exponentially over time instead of getting cleared immediately as debt is
      paid off. While the overall behavior is similar to the blk-cgroup
      implementation used by blk-iolatency, a lot of the details are different and
      due to the empirical nature of the mechanism, it's challenging to adapt the
      mechanism for one controller without negatively impacting the other.
      
      As the delay is gradually decayed now, there's no point in running it from
      its own hrtimer. Periodic updates are now performed from ioc_timer_fn() and
      the dedicated hrtimer is removed.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Josef Bacik <josef@toxicpanda.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      5160a5a5
    • Tejun Heo's avatar
      blk-iocost: revamp debt handling · c421a3eb
      Tejun Heo authored
      
      
      Debt handling had several issues.
      
      * How much inuse a debtor carries wasn't clearly defined. inuse would be
        driven down over time from not issuing IOs but it'd be better to clamp it
        to minimum immediately once in debt.
      
      * How much can be paid off was determined by hweight_inuse. As inuse was
        driven down, the payment amount would fall together regardless of the
        debtor's active weight. This means that the debtors were punished harshly.
      
      * ioc_rqos_merge() wasn't calling blkcg_schedule_throttle() after
        iocg_kick_delay().
      
      This patch revamps debt handling so that
      
      * Debt handling owns inuse for iocgs in debt and keeps them at zero.
      
      * Payment amount is determined by hweight_active. This is more deterministic
        and safer than hweight_inuse but still far from ideal in that it doesn't
        factor in possible donations from other iocgs for debt payments. This
        likely needs further improvements in the future.
      
      * iocg_rqos_merge() now calls blkcg_schedule_throttle() as necessary.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Andy Newell <newella@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c421a3eb
    • Tejun Heo's avatar
      blk-iocost: revamp in-period donation snapbacks · b0853ab4
      Tejun Heo authored
      
      
      When the margin drops below the minimum on a donating iocg, donation is
      immediately canceled in full. There are a couple shortcomings with the
      current behavior.
      
      * It's abrupt. A small temporary budget deficit can lead to a wide swing in
        weight allocation and a large surplus.
      
      * It's open coded in the issue path but not implemented for the merge path.
        A series of merges at a low inuse can make the iocg incur debts and stall
        incorrectly.
      
      This patch reimplements in-period donation snapbacks so that
      
      * inuse adjustment and cost calculations are factored into
        adjust_inuse_and_calc_cost() which is called from both the issue and merge
        paths.
      
      * Snapbacks are more gradual. It occurs in quarter steps.
      
      * A snapback triggers if the margin goes below the low threshold and is
        lower than the budget at the time of the last adjustment.
      
      * For the above, __propagate_weights() stores the margin in
        iocg->saved_margin. Move iocg->last_inuse storing together into
        __propagate_weights() for consistency.
      
      * Full snapback is guaranteed when there are waiters.
      
      * With precise donation and gradual snapbacks, inuse adjustments are now a
        lot more effective and the value of scaling inuse on weight changes isn't
        clear. Removed inuse scaling from weight_update().
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      b0853ab4
    • Tejun Heo's avatar
      blk-iocost: revamp donation amount determination · f1de2439
      Tejun Heo authored
      
      
      iocost has various safety nets to combat inuse adjustment calculation
      inaccuracies. With Andy's method implemented in transfer_surpluses(), inuse
      adjustment calculations are now accurate and we can make donation amount
      determinations accurate too.
      
      * Stop keeping track of past usage history and using the maximum. Act on the
        immediate usage information.
      
      * Remove donation constraints defined by SURPLUS_* constants. Donate
        whatever isn't used.
      
      * Determine the donation amount so that the iocg will end up with
        MARGIN_TARGET_PCT budget at the end of the coming period assuming the same
        usage as the previous period. TARGET is set at 50% of period, which is the
        previous maximum. This provides smooth convergence for most repetitive IO
        patterns.
      
      * Apply donation logic early at 20% budget. There's no risk in doing so as
        the calculation is based on the delta between the current budget and the
        target budget at the end of the coming period.
      
      * Remove preemptive iocg activation for zero cost IOs. As donation can reach
        near zero now, the mere activation doesn't provide any protection anymore.
        In the unlikely case that this becomes a problem, the right solution is
        assigning appropriate costs for such IOs.
      
      This significantly improves the donation determination logic while also
      simplifying it. Now all donations are immediate, exact and smooth.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Andy Newell <newella@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f1de2439
    • Tejun Heo's avatar
      blk-iocost: implement Andy's method for donation weight updates · e08d02aa
      Tejun Heo authored
      
      
      iocost implements work conservation by reducing iocg->inuse and propagating
      the adjustment upwards proportionally. However, while I knew the target
      absolute hierarchical proportion - adjusted hweight_inuse, I couldn't figure
      out how to determine the iocg->inuse adjustment to achieve that and
      approximated the adjustment by scaling iocg->inuse using the proportion of
      the needed hweight_inuse changes.
      
      When nested, these scalings aren't accurate even when adjusting a single
      node as the donating node also receives the benefit of the donated portion.
      When multiple nodes are donating as they often do, they can be wildly wrong.
      
      iocost employed various safety nets to combat the inaccuracies. There are
      ample buffers in determining how much to donate, the adjustments are
      conservative and gradual. While it can achieve a reasonable level of work
      conservation in simple scenarios, the inaccuracies can easily add up leading
      to significant loss of total work. This in turn makes it difficult to
      closely cap vrate as vrate adjustment is needed to compensate for the loss
      of work. The combination of inaccurate donation calculations and vrate
      adjustments can lead to wide fluctuations and clunky overall behaviors.
      
      Andy Newell devised a method to calculate the needed ->inuse updates to
      achieve the target hweight_inuse's. The method is compatible with the
      proportional inuse adjustment propagation which allows all hot path
      operations to be local to each iocg.
      
      To roughly summarize, Andy's method divides the tree into donating and
      non-donating parts, calculates global donation rate which is used to
      determine the target hweight_inuse for each node, and then derives per-level
      proportions. There's non-trivial amount of math involved. Please refer to
      the following pdfs for detailed descriptions.
      
        https://drive.google.com/file/d/1PsJwxPFtjUnwOY1QJ5AeICCcsL7BM3bo
        https://drive.google.com/file/d/1vONz1-fzVO7oY5DXXsLjSxEtYYQbOvsE
        https://drive.google.com/file/d/1WcrltBOSPN0qXVdBgnKm4mdp9FhuEFQN
      
      This patch implements Andy's method in transfer_surpluses(). This makes the
      donation calculations accurate per cycle and enables further improvements in
      other parts of the donation logic.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Cc: Andy Newell <newella@fb.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e08d02aa
    • Tejun Heo's avatar
      blk-iocost: restructure surplus donation logic · 93f7d2db
      Tejun Heo authored
      
      
      The way the surplus donation logic is structured isn't great. There are two
      separate paths for starting/increasing donations and decreasing them making
      the logic harder to follow and is prone to unnecessary behavior differences.
      
      In preparation for improved donation handling, this patch restructures the
      code so that
      
      * All donors - new, increasing and decreasing - are funneled through the
        same code path.
      
      * The target donation calculation is factored into hweight_after_donation()
        which is called once from the same spot for all possible donors.
      
      * Actual inuse adjustment is factored into trasnfer_surpluses().
      
      This change introduces a few behavior differences - e.g. donation amount
      reduction now uses the max usage of the recent three periods just like new
      and increasing donations, and inuse now gets adjusted upwards the same way
      it gets downwards. These differences are unlikely to have severely negative
      implications and the whole logic will be revamped soon.
      
      This patch also removes two tracepoints. The existing TPs don't quite fit
      the new implementation. A later patch will update and reinstate them.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      93f7d2db
    • Tejun Heo's avatar
      blk-iocost: decouple vrate adjustment from surplus transfers · 065655c8
      Tejun Heo authored
      
      
      Budget donations are inaccurate and could take multiple periods to converge.
      To prevent triggering vrate adjustments while surplus transfers were
      catching up, vrate adjustment was suppressed if donations were increasing,
      which was indicated by non-zero nr_surpluses.
      
      This entangling won't be necessary with the scheduled rewrite of donation
      mechanism which will make it precise and immediate. Let's decouple the two
      in preparation.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      065655c8
    • Tejun Heo's avatar
      blk-iocost: replace iocg->has_surplus with ->surplus_list · 8692d2db
      Tejun Heo authored
      
      
      Instead of marking iocgs with surplus with a flag and filtering for them
      while walking all active iocgs, build a surpluses list. This doesn't make
      much difference now but will help implementing improved donation logic which
      will iterate iocgs with surplus multiple times.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8692d2db
    • Tejun Heo's avatar
      blk-iocost: calculate iocg->usages[] from iocg->local_stat.usage_us · 1aa50d02
      Tejun Heo authored
      
      
      Currently, iocg->usages[] which are used to guide inuse adjustments are
      calculated from vtime deltas. This, however, assumes that the hierarchical
      inuse weight at the time of calculation held for the entire period, which
      often isn't true and can lead to significant errors.
      
      Now that we have absolute usage information collected, we can derive
      iocg->usages[] from iocg->local_stat.usage_us so that inuse adjustment
      decisions are made based on actual absolute usage. The calculated usage is
      clamped between 1 and WEIGHT_ONE and WEIGHT_ONE is also used to signal
      saturation regardless of the current hierarchical inuse weight.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1aa50d02
    • Tejun Heo's avatar
      blk-iocost: add absolute usage stat · 97eb1975
      Tejun Heo authored
      
      
      Currently, iocost doesn't collect or expose any statistics punting off all
      monitoring duties to drgn based iocost_monitor.py. While it works for some
      scenarios, there are some usability and data availability challenges. For
      example, accurate per-cgroup usage information can't be tracked by vtime
      progression at all and the number available in iocg->usages[] are really
      short-term snapshots used for control heuristics with possibly significant
      errors.
      
      This patch implements per-cgroup absolute usage stat counter and exposes it
      through io.stat along with the current vrate. Usage stat collection and
      flushing employ the same method as cgroup rstat on the active iocg's and the
      only hot path overhead is preemption toggling and adding to a percpu
      counter.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      97eb1975
    • Tejun Heo's avatar
      blk-iocost: grab ioc->lock for debt handling · da437b95
      Tejun Heo authored
      
      
      Currently, debt handling requires only iocg->waitq.lock. In the future, we
      want to adjust and propagate inuse changes depending on debt status. Let's
      grab ioc->lock in debt handling paths in preparation.
      
      * Because ioc->lock nests outside iocg->waitq.lock, the decision to grab
        ioc->lock needs to be made before entering the critical sections.
      
      * Add and use iocg_[un]lock() which handles the conditional double locking.
      
      * Add @pay_debt to iocg_kick_waitq() so that debt payment happens only when
        the caller grabbed both locks.
      
      This patch is prepatory and the comments contain references to future
      changes.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      da437b95
    • Tejun Heo's avatar
      blk-iocost: streamline vtime margin and timer slack handling · 7ca5b2e6
      Tejun Heo authored
      
      
      The margin handling was pretty inconsistent.
      
      * ioc->margin_us and ioc->inuse_margin_vtime were used as vtime margin
        thresholds. However, the two are in different units with the former
        requiring conversion to vtime on use.
      
      * iocg_kick_waitq() was using a quarter of WAITQ_TIMER_MARGIN_PCT of
        period_us as the timer slack - ~1.2%. While iocg_kick_delay() was using a
        quarter of ioc->margin_us - ~12.5%. There aren't strong reasons to use
        different values for the two.
      
      This patch cleans up margin and timer slack handling:
      
      * vtime margins are now recorded in ioc->margins.{min, max} on period
        duration changes and used consistently.
      
      * Timer slack is now 1% of period_us and recorded in ioc->timer_slack_ns and
        used consistently for iocg_kick_waitq() and iocg_kick_delay().
      
      The only functional change is shortening of timer slack. No meaningful
      visible change is expected.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7ca5b2e6
    • Tejun Heo's avatar
      blk-iocost: make ioc_now->now and ioc->period_at 64bit · ce95570a
      Tejun Heo authored
      
      
      They are in microseconds and wrap in around 1.2 hours with u32. While
      unlikely, confusions from wraparounds are still possible. We aren't saving
      anything meaningful by keeping these u32. Let's make them u64.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      ce95570a
    • Tejun Heo's avatar
      blk-iocost: use WEIGHT_ONE based fixed point number for weights · bd0adb91
      Tejun Heo authored
      
      
      To improve weight donations, we want to able to scale inuse with a greater
      accuracy and down below 1. Let's make non-hierarchical weights to use
      WEIGHT_ONE based fixed point numbers too like hierarchical ones.
      
      This doesn't cause any behavior changes yet.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      bd0adb91
    • Tejun Heo's avatar
      blk-iocost: s/HWEIGHT_WHOLE/WEIGHT_ONE/g · fe20cdb5
      Tejun Heo authored
      
      
      We're gonna use HWEIGHT_WHOLE for regular weights too. Let's rename it to
      WEIGHT_ONE.
      
      Pure rename.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      fe20cdb5
    • Tejun Heo's avatar
      blk-iocost: make iocg_kick_waitq() call iocg_kick_delay() after paying debt · 7b84b49e
      Tejun Heo authored
      
      
      iocg_kick_waitq() is the function which pays debt and iocg_kick_delay()
      updates the actual delay status accordingly. If iocg_kick_delay() is not
      called after iocg_kick_delay() updated debt, unnecessarily large delays can
      be applied temporarily.
      
      Let's make sure such conditions don't occur by making iocg_kick_waitq()
      always call iocg_kick_delay() after paying debt.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7b84b49e
    • Tejun Heo's avatar
      blk-iocost: move iocg_kick_delay() above iocg_kick_waitq() · 6ef20f78
      Tejun Heo authored
      
      
      We'll make iocg_kick_waitq() call iocg_kick_delay(). Reorder them in
      preparation. This is pure code reorganization.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      6ef20f78
    • Tejun Heo's avatar
      blk-iocost: clamp inuse and skip noops in __propagate_weights() · db84a72a
      Tejun Heo authored
      
      
      __propagate_weights() currently expects the callers to clamp inuse within
      [1, active], which is needlessly fragile. The inuse adjustment logic is
      going to be revamped, in preparation, let's make __propagate_weights() clamp
      inuse on entry.
      
      Also, make it avoid weight updates altogether if neither active or inuse is
      changed.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      db84a72a
    • Tejun Heo's avatar
      blk-iocost: rename propagate_active_weights() to propagate_weights() · 00410f1b
      Tejun Heo authored
      
      
      It already propagates two weights - active and inuse - and there will be
      another soon. Let's drop the confusing misnomers. Rename
      [__]propagate_active_weights() to [__]propagate_weights() and
      commit_active_weights() to commit_weights().
      
      This is pure rename.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      00410f1b
    • Tejun Heo's avatar
      blk-iocost: use local[64]_t for percpu stat · 5e124f74
      Tejun Heo authored
      
      
      blk-iocost has been reading percpu stat counters from remote cpus which on
      some archs can lead to torn reads in really rare occassions. Use local[64]_t
      for those counters.
      
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      5e124f74
    • Christoph Hellwig's avatar
    • Christoph Hellwig's avatar
      block: remove the disk argument to delete_partition · 8328eb28
      Christoph Hellwig authored
      
      
      We can trivially derive the gendisk from the hd_struct.
      
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      8328eb28
    • Christoph Hellwig's avatar
      block: cleanup __alloc_disk_node · f93af2a4
      Christoph Hellwig authored
      
      
      Use early returns and goto-based unwinding to simplify the flow a bit.
      
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      f93af2a4
    • Christoph Hellwig's avatar
      block: move the devcgroup_inode_permission call to blkdev_get · e5c7fb40
      Christoph Hellwig authored
      
      
      devcgroup_inode_permission is never called for the recusive case, so
      move it out into blkdev_get.
      
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e5c7fb40
    • Christoph Hellwig's avatar
      block: remove an outdated comment on the bd_dev field · 46d40cfa
      Christoph Hellwig authored
      
      
      kdev_t is long gone, so we don't need to comment a field isn't one..
      
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      46d40cfa
    • Christoph Hellwig's avatar
      block: remove the discard_alignment field from struct hd_struct · 7cf34d97
      Christoph Hellwig authored
      
      
      The alignment offset is only used in slow path callers, so just calculate
      it on the fly.
      
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7cf34d97
    • Christoph Hellwig's avatar
      block: remove the alignment_offset field from struct hd_struct · 7b8917f5
      Christoph Hellwig authored
      
      
      The alignment offset is only used in slow path callers, so just calculate
      it on the fly.
      
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7b8917f5
    • Xianting Tian's avatar
      blk-mq: use BLK_MQ_NO_TAG for no tag · e44a6a23
      Xianting Tian authored
      
      
      Replace various magic -1 constants for tags with BLK_MQ_NO_TAG.
      
      Signed-off-by: default avatarXianting Tian <tian.xianting@h3c.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e44a6a23
    • Baolin Wang's avatar
      block: Remove blk_mq_attempt_merge() function · cdfcef9e
      Baolin Wang authored
      
      
      The small blk_mq_attempt_merge() function is only called by
      __blk_mq_sched_bio_merge(), just open code it.
      
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarBaolin Wang <baolin.wang@linux.alibaba.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      cdfcef9e
    • Baolin Wang's avatar
      block: Add a new helper to attempt to merge a bio · 7d7ca7c5
      Baolin Wang authored
      
      
      There are lots of duplicated code when trying to merge a bio from
      plug list and sw queue, we can introduce a new helper to attempt
      to merge a bio, which can simplify the blk_bio_list_merge()
      and blk_attempt_plug_merge().
      
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarBaolin Wang <baolin.wang@linux.alibaba.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7d7ca7c5
    • Baolin Wang's avatar
      block: Move blk_mq_bio_list_merge() into blk-merge.c · bdc6a287
      Baolin Wang authored
      
      
      Move the blk_mq_bio_list_merge() into blk-merge.c and
      rename it as a generic name.
      
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarBaolin Wang <baolin.wang@linux.alibaba.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      bdc6a287