- Mar 02, 2022
-
-
Oliver Neukum authored
commit e9da0b56 upstream. A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit a9727983 upstream. Fix 3 bugs: a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted. b) Tell emulate_ldw() to handle fldw_l as floating point instruction c) Tell emulate_ldw() to handle ldw_m as integer instruction Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit dd2288f4 upstream. Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location. On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems: First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions. The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefano Garzarella authored
commit a58da53f upstream. vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: <syzbot+1e3ea63db39f2b4440e0@syzkaller.appspotmail.com> Reported-and-tested-by: <syzbot+3140b17cb44a7b174008@syzkaller.appspotmail.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Qiao authored
commit 05c7b7a9 upstream. As previously discussed(https://lkml.org/lkml/2022/1/20/51), cpuset_attach() is affected with similar cpu hotplug race, as follow scenario: cpuset_attach() cpu hotplug --------------------------- ---------------------- down_write(cpuset_rwsem) guarantee_online_cpus() // (load cpus_attach) sched_cpu_deactivate set_cpu_active() // will change cpu_active_mask set_cpus_allowed_ptr(cpus_attach) __set_cpus_allowed_ptr_locked() // (if the intersection of cpus_attach and cpu_active_mask is empty, will return -EINVAL) up_write(cpuset_rwsem) To avoid races such as described above, protect cpuset_attach() call with cpu_hotplug_lock. Fixes: be367d09 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time") Cc: stable@vger.kernel.org # v2.6.32+ Reported-by: Zhao Gongyi <zhaogongyi@huawei.com> Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com> Acked-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Feb 23, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220221084910.454824160@linuxfoundation.org Tested-by: Slade Watkins <slade@sladewatkins.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc St-Amand authored
[ Upstream commit 37f78606 ] Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Slark Xiao authored
[ Upstream commit 8ecbb179 ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
JaeSang Yoo authored
[ Upstream commit 3203ce39 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600c ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com> [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zoltán Böszörményi authored
[ Upstream commit c8ea23d5 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wan Jiabing authored
[ Upstream commit 80c469a0 ] Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Trond Myklebust authored
[ Upstream commit d19e0183 ] The result of the writeback, whether it is an ENOSPC or an EIO, or anything else, does not inhibit the NFS client from reporting the correct file timestamps. Fixes: 79566ef0 ("NFS: Getattr doesn't require data sync semantics") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jim Mattson authored
[ Upstream commit 710c4765 ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by: David Dunn <daviddunn@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
david regan authored
[ Upstream commit 36415a79 ] The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan <dregan@mail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02 Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kamal Dasu authored
[ Upstream commit 3c7c1e45 ] Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Max Kellermann authored
commit 9d2231c5 upstream. The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd ("new iov_iter flavour: pipe-backed") To: Alexander Viro <viro@zeniv.linux.org.uk> To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafał Miłecki authored
commit 834cea3a upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c6 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
蒋家盛 authored
commit 2d21543e upstream. Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Fixes: dc312349 ("dmaengine: rcar-dmac: Widen DMA mask to 40 bits") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220106030939.2644320-1-jiasheng@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 5740d068 upstream. We have been living dangerously, at the mercy of malicious users, abusing TC_ACT_REPEAT, as shown by this syzpot report [1]. Add an arbitrary limit (32) to the number of times an action can return TC_ACT_REPEAT. v2: switch the limit to 32 instead of 10. Use net_warn_ratelimited() instead of pr_err_once(). [1] (C repro available on demand) rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0 (t=10502 jiffies g=5305 q=190) rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 rcu: Possible timer handling issue on cpu=0 timer-softirq=3527 rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:4986 [inline] __schedule+0xab2/0x4db0 kernel/sched/core.c:6295 schedule+0xd2/0x260 kernel/sched/core.c:6368 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline] RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline] RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline] RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508 Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84 RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80 FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline] queued_spin_lock include/asm-generic/qspinlock.h:85 [inline] do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:354 [inline] sch_tree_lock include/net/sch_generic.h:610 [inline] sch_tree_lock include/net/sch_generic.h:605 [inline] prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211 prio_init+0x5c/0x80 net/sched/sch_prio.c:244 qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7ee98aae99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0 R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4 </TASK> INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs NMI backtrace for cpu 1 CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: mld mld_ifc_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:604 [inline] check_cpu_stall kernel/rcu/tree_stall.h:688 [inline] rcu_pending kernel/rcu/tree.c:3919 [inline] rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286 Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246 RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0 R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8 tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256 tcf_action_exec net/sched/act_api.c:1049 [inline] tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026 tcf_exts_exec include/net/pkt_cls.h:326 [inline] route4_classify+0xef0/0x1400 net/sched/cls_route.c:179 __tcf_classify net/sched/cls_api.c:1549 [inline] tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615 prio_classify net/sched/sch_prio.c:42 [inline] prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75 dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668 __dev_xmit_skb net/core/dev.c:3756 [inline] __dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:306 [inline] __ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288 ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0x196/0x310 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126 iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82 geneve_xmit_skb drivers/net/geneve.c:966 [inline] geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one net/core/dev.c:3473 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489 __dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116 neigh_hh_output include/net/neighbour.h:533 [inline] neigh_output include/net/neighbour.h:547 [inline] ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170 ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:451 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826 mld_send_cr net/ipv6/mcast.c:2127 [inline] mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ---------------- Code disassembly (best guess): 0: 48 89 eb mov %rbp,%rbx 3: c6 45 01 01 movb $0x1,0x1(%rbp) 7: 41 bc 00 80 00 00 mov $0x8000,%r12d d: 48 c1 e9 03 shr $0x3,%rcx 11: 83 e3 07 and $0x7,%ebx 14: 41 be 01 00 00 00 mov $0x1,%r14d 1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 21: fc ff df 24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13 28: eb 0c jmp 0x36 * 2a: f3 90 pause <-- trapping instruction 2c: 41 83 ec 01 sub $0x1,%r12d 30: 0f 84 72 04 00 00 je 0x4a8 36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax 3b: 38 d8 cmp %bl,%al 3d: 7f 08 jg 0x47 3f: 84 .byte 0x84 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220215235305.3272331-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eliav Farber authored
commit f8efca92 upstream. Do alignment logic properly and use the "ptr" local variable for calculating the remainder of the alignment. This became an issue because struct edac_mc_layer has a size that is not zero modulo eight, and the next offset that was prepared for the private data was unaligned, causing an alignment exception. The patch in Fixes: which broke this actually wanted to "what we actually care about is the alignment of the actual pointer that's about to be returned." But it didn't check that alignment. Use the correct variable "ptr" for that. [ bp: Massage commit message. ] Fixes: 8447c4d1 ("edac: Do alignment logic properly in edac_align_ptr()") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit e0caaf75 upstream. Commit ac795161 (NFSv4: Handle case where the lookup of a directory fails) [1], part of Linux since 5.17-rc2, introduced a regression, where a symbolic link on an NFS mount to a directory on another NFS does not resolve(?) the first time it is accessed: Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: ac795161 ("NFSv4: Handle case where the lookup of a directory fails") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Donald Buczek <buczek@molgen.mpg.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anders Roxell authored
commit fe663df7 upstream. Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian 2.37.90.20220207) the following build error shows up: {standard input}: Assembler messages: {standard input}:2088: Error: unrecognized opcode: `ptesync' make[3]: *** [/builds/linux/scripts/Makefile.build:287: arch/powerpc/lib/sstep.o] Error 1 Add the 'ifdef CONFIG_PPC64' around the 'ptesync' in function 'emulate_update_regs()' to like it is in 'analyse_instr()'. Since it looks like it got dropped inadvertently by commit 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs"). A key detail is that analyse_instr() will never recognise lwsync or ptesync on 32-bit (because of the existing ifdef), and as a result emulate_update_regs() should never be called with an op specifying either of those on 32-bit. So removing them from emulate_update_regs() should be a nop in terms of runtime behaviour. Fixes: 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs") Cc: stable@vger.kernel.org # v4.14+ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [mpe: Add last paragraph of change log mentioning analyse_instr() details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220211005113.1361436-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 650204de upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-4-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 564778d7 upstream. When writing out a stereo control we discard the change notification from the first channel, meaning that events are only generated based on changes to the second channel. Ensure that we report a change if either channel has changed. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220201155629.120510-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit dd8e5b16 upstream. By some unknown reason, BIOS on Shenker Dock 15 doesn't set up the codec mask properly for the onboard audio. Let's set the forced codec mask to enable the codec discovery. Reported-by: <dmummenschanz@web.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 6317f744 upstream. The forced probe mask via probe_mask 0x100 bit doesn't work any longer as expected since the bus init code was moved and it's clearing the codec_mask value that was set beforehand. This patch fixes the long-time regression by moving the check_probe_mask() call. Fixes: a41d1224 ("ALSA: hda - Embed bus into controller object") Reported-by: <dmummenschanz@web.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/trinity-f018660b-95c9-442b-a2a8-c92a56eb07ed-1644345967148@3c-app-webde-bap22 Link: https://lore.kernel.org/r/20220214100020.8870-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit 52a9dab6 upstream. GCC 12 correctly reports a potential use-after-free condition in the xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)" when size == 0: In file included from help.c:12: In function 'xrealloc', inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free] 56 | ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free] 58 | ret = realloc(ptr, 1); | ^~~~~~~~~~~~~~~ subcmd-util.h:52:21: note: call to 'realloc' here 52 | void *ret = realloc(ptr, size); | ^~~~~~~~~~~~~~~~~~ Fixes: 2f4ce5ec ("perf tools: Finalize subcmd independence") Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Signed-off-by: Kees Kook <keescook@chromium.org> Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: linux-hardening@vger.kernel.org Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu> Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 9ceaf6f7 upstream. syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit dcd54265 upstream. trace_napi_poll_hit() is reading stat->dev while another thread can write on it from dropmon_net_event() Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already, we only have to take care of load/store tearing. BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1: dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579 notifier_call_chain kernel/notifier.c:84 [inline] raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392 call_netdevice_notifiers_info net/core/dev.c:1919 [inline] call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415 ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123 vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0: trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292 trace_napi_poll include/trace/events/napi.h:14 [inline] __napi_poll+0x36b/0x3f0 net/core/dev.c:6366 napi_poll net/core/dev.c:6432 [inline] net_rx_action+0x29e/0x650 net/core/dev.c:6519 __do_softirq+0x158/0x2de kernel/softirq.c:558 do_softirq+0xb1/0xf0 kernel/softirq.c:459 __local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:394 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 value changed: 0xffff88815883e000 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker Fixes: 4ea7e386 ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
commit 35a79e64 upstream. When 'ping' changes to use PING socket instead of RAW socket by: # sysctl -w net.ipv4.ping_group_range="0 100" There is another regression caused when matching sk_bound_dev_if and dif, RAW socket is using inet_iif() while PING socket lookup is using skb->dev->ifindex, the cmd below fails due to this: # ip link add dummy0 type dummy # ip link set dummy0 up # ip addr add 192.168.111.1/24 dev dummy0 # ping -I dummy0 192.168.111.1 -c1 The issue was also reported on: https://github.com/iputils/iputils/issues/104 But fixed in iputils in a wrong way by not binding to device when destination IP is on device, and it will cause some of kselftests to fail, as Jianlin noticed. This patch is to use inet(6)_iif and inet(6)_sdif to get dif and sdif for PING socket, and keep consistent with RAW socket. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit bdc120a2 upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with the symbol_duration in order to get these values in microseconds. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220201180629.93410-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit 4c29c1e2 upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this in the gen2 code as well. Fixes: eda50cde ("iwlwifi: pcie: add context information support") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit e9848aed upstream. If we run into this error path, we shouldn't unlock the mutex since it's not locked since. Fix this. Fixes: a6bd005f ("iwlwifi: pcie: fix RF-Kill vs. firmware load race") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Seth Forshee authored
commit b9208492 upstream. vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit 1b5a42d9 upstream. In the function bacct_add_task the code reading task->exit_code was introduced in commit f3cef7a9 ("[PATCH] csa: basic accounting over taskstats"), and it is not entirely clear what the taskstats interface is trying to return as only returning the exit_code of the first task in a process doesn't make a lot of sense. As best as I can figure the intent is to return task->exit_code after a task exits. The field is returned with per task fields, so the exit_code of the entire process is not wanted. Only the value of the first task is returned so this is not a useful way to get the per task ptrace stop code. The ordinary case of returning this value is returning after a task exits, which also precludes use for getting a ptrace value. It is common to for the first task of a process to also be the last task of a process so this field may have done something reasonable by accident in testing. Make ac_exitcode a reliable per task value by always returning it for every exited task. Setting ac_exitcode in a sensible mannter makes it possible to continue to provide this value going forward. Cc: Balbir Singh <bsingharora@gmail.com> Fixes: f3cef7a9 ("[PATCH] csa: basic accounting over taskstats") Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Nault authored
commit 23e7b1bf upstream. Similar to commit 94e22389 ("xfrm4: strip ECN bits from tos field"), clear the ECN bits from iph->tos when setting ->flowi4_tos. This ensures that the last bit of ->flowi4_tos is cleared, so ip_route_output_key_hash() isn't going to restrict the scope of the route lookup. Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason to clear the high order bits. Found by code inspection, compile tested only. Fixes: 4da3089f ("[IPSEC]: Use TOS when doing tunnel lookups") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> [sudip: manually backport to previous location] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Bishop authored
commit 364438fd upstream. The iMac 12,1 does not use the gmux driver for backlight, so the radeon backlight device is needed to set the brightness. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1838 Signed-off-by: Nicholas Bishop <nicholasbishop@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit bea2662e upstream. If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. Cc: stable@vger.kernel.org Reported-by: Stefan Agner <stefan@agner.ch> Reported-by: Wolfgang Walter <linux@stwm.de> Reported-by: Jason Self <jason@bluehome.net> Reported-by: Dominik Behr <dominik@dominikbehr.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: ab07506b ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Igor Pylypiv authored
[ Upstream commit 67d6212a ] This reverts commit 774a1221. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d2 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Changyuan Lyu <changyuanl@google.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Darrick J. Wong authored
[ Upstream commit dd5532a4 ] Strangely, dquot_quota_sync ignores the return code from the ->sync_fs call, which means that quotacalls like Q_SYNC never see the error. This doesn't seem right, so fix that. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-