- Jul 28, 2021
-
-
Vladimir Oltean authored
[ Upstream commit e40cba94 ] This simple series of commands: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 fails on sja1105 with the following error: [ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN [ 33.447710] sja1105 spi0.1: Invalid config, cannot upload Warning: sja1105: Failed to change VLAN Ethertype. For context, sja1105 has 3 operating modes: - SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware - SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware - SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the bridge_vlans are committed to hardware Swapping out a VLAN list and another in happens in sja1105_build_vlan_table(), which performs a delta update procedure. That function is called from a few places, notably from sja1105_vlan_filtering() which is called from the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler. The above set of 2 commands fails when run on a kernel pre-commit 8841f6e6 ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"). So the priv->vlan_state transition that takes place is between VLAN-unaware and full VLAN filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans are swapped in. So why does it fail? Well, the bridge driver, through nbp_vlan_init(), first sets up the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then proceeds to call nbp_vlan_add for the default_pvid. So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge VLANs (yet). So we have wiped the VLAN table clean, and the low-level static config checker complains of an invalid configuration. We _will_ add the bridge VLANs using the dynamic config interface, albeit later, when nbp_vlan_add() calls us. So it is natural that it fails. So why did it ever work? Surprisingly, it looks like I only tested this configuration with 2 things set up in a particular way: - a network manager that brings all ports up - a kernel with CONFIG_VLAN_8021Q=y It is widely known that commit ad1afb00 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net device that comes up. DSA treats these VLANs as bridge VLANs, and therefore, in my testing, the list of bridge_vlans was never empty. However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily empty, and the sja1105_static_config_reload() call from sja1105_vlan_filtering() will fail. To fix this, the simplest thing is to keep VID 4095, the one used for CPU-injected control packets since commit ed040abc ("net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic"), in the list of bridge VLANs too, not just the list of tag_8021q VLANs. This ensures that the list of bridge VLANs will never be empty. Fixes: ec5ae610 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Reported-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Wei Wang authored
[ Upstream commit 213ad73d ] Multiple complaints have been raised from the TFO users on the internet stating that the TFO blackhole logic is too aggressive and gets falsely triggered too often. (e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/) Considering that most middleboxes no longer drop TFO packets, we decide to disable the blackhole logic by setting /proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default. Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 58acd100 ] syzbot reported a call trace: BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 Call Trace: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:131 [inline] sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865 sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:723 This is an use-after-free issue caused by not updating asoc->shkey after it was replaced in the key list asoc->endpoint_shared_keys, and the old key was freed. This patch is to fix by also updating active_key for asoc when old key is being replaced with a new one. Note that this issue doesn't exist in sctp_auth_del_key_id(), as it's not allowed to delete the active_key from the asoc. Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key") Reported-by: <syzbot+b774577370208727d12b@syzkaller.appspotmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Christoph Hellwig authored
[ Upstream commit aaeb7bb0 ] When using Write Zeroes on a namespace that has protection information enabled they behavior without the PRACT bit counter-intuitive and will generally lead to validation failures when reading the written blocks. Fix this by always setting the PRACT bit that generates matching PI data on the fly. Fixes: 6e02318e ("nvme: add support for the Write Zeroes command") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sayanta Pattanayak authored
[ Upstream commit e9a72f87 ] When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5 ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com> [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
David Howells authored
[ Upstream commit 6c881ca0 ] To quote Alexey[1]: I was adding custom tracepoint to the kernel, grabbed full F34 kernel .config, disabled modules and booted whole shebang as VM kernel. Then did perf record -a -e ... It crashed: general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:t_show+0x22/0xd0 Then reproducer was narrowed to # cat /sys/kernel/tracing/printk_formats Original F34 kernel with modules didn't crash. So I started to disable options and after disabling AFS everything started working again. The root cause is that AFS was placing char arrays content into a section full of _pointers_ to strings with predictable consequences. Non canonical address 435f5346592e4243 is "CB.YFS_" which came from CM_NAME macro. Steps to reproduce: CONFIG_AFS=y CONFIG_TRACING=y # cat /sys/kernel/tracing/printk_formats Fix this by the following means: (1) Add enum->string translation tables in the event header with the AFS and YFS cache/callback manager operations listed by RPC operation ID. (2) Modify the afs_cb_call tracepoint to print the string from the translation table rather than using the string at the afs_call name pointer. (3) Switch translation table depending on the service we're being accessed as (AFS or YFS) in the tracepoint print clause. Will this cause problems to userspace utilities? Note that the symbolic representation of the YFS service ID isn't available to this header, so I've put it in as a number. I'm not sure if this is the best way to do this. (4) Remove the name wrangling (CM_NAME) macro and put the names directly into the afs_call_type structs in cmservice.c. Fixes: 8e8d7f13 ("afs: Add some tracepoints") Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: Andrew Morton <akpm@linux-foundation.org> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1] Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/162430903582.28961998 .6098150063997983353.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost) Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2 Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vincent Palatin authored
[ Upstream commit f3a1a937 ] This reverts commit 0bd86049 . While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd86049 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Zhihao Cheng authored
[ Upstream commit 7764656b ] Followling process: nvme_probe nvme_reset_ctrl nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) queue_work(nvme_reset_wq, &ctrl->reset_work) --------------> nvme_remove nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING) worker_thread process_one_work nvme_reset_work WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING) , which will trigger WARN_ON in nvme_reset_work(): [ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594 [ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0 [ 127.552518] Call Trace: [ 127.552840] ? kvm_sched_clock_read+0x25/0x40 [ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30 [ 127.555117] ? send_call_function_single_ipi+0x9b/0x130 [ 127.556263] ? __smp_call_single_queue+0x48/0x60 [ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0 [ 127.558231] ? try_to_wake_up+0x265/0x9d0 [ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290 [ 127.560118] process_one_work+0x28c/0x640 [ 127.561002] worker_thread+0x39a/0x700 [ 127.561833] ? rescuer_thread+0x580/0x580 [ 127.562714] kthread+0x18c/0x1e0 [ 127.563444] ? set_kthread_struct+0x70/0x70 [ 127.564347] ret_from_fork+0x1f/0x30 The preceding problem can be easily reproduced by executing following script (based on blktests suite): test() { pdev="$(_get_pci_dev_from_blkdev)" sysfs="/sys/bus/pci/devices/${pdev}" for ((i = 0; i < 10; i++)); do echo 1 > "$sysfs/remove" echo 1 > /sys/bus/pci/rescan done } Since the device ctrl could be updated as an non-RESETTING state by repeating probe/remove in userspace (which is a normal situation), we can replace stack dumping WARN_ON with a warnning message. Fixes: 82b057ca ("nvme-pci: fix multiple ctrl removal schedulin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Luis Henriques authored
[ Upstream commit cdb330f4 ] If MDSs aren't available while mounting a filesystem, the session state will transition from SESSION_OPENING to SESSION_CLOSING. And in that scenario check_session_state() will be called from delayed_work() and trigger this WARN. Avoid this by only WARNing after a session has already been established (i.e., the s_ttl will be different from 0). Fixes: 62575e27 ("ceph: check session state after bumping session->s_seq") Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit 8fb4792f ] While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Peilin Ye authored
[ Upstream commit 727d6a8b ] Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. Fixes: 86da71b5 ("net_sched: Introduce skbmod action") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Alexandru Tachici authored
[ Upstream commit c45c1e82 ] The bcm2835_spi_transfer_one function can create a deadlock if it is called while another thread already has the CCF lock. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Fixes: f8043872 ("spi: add driver for BCM2835") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jian Shen authored
[ Upstream commit bbfd4506 ] Currently, VF doesn't enable rx VLAN offload when initializating, and PF does it for VFs. If user disable the rx VLAN offload for VF with ethtool -K, and reload the VF driver, it may cause the rx VLAN offload state being inconsistent between hardware and software. Fixes it by enabling rx VLAN offload when VF initializing. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chengwen Feng authored
[ Upstream commit 1b713d14 ] Currently, the mailbox synchronous communication between VF and PF use the following fields to maintain communication: 1. Origin_mbx_msg which was combined by message code and subcode, used to match request and response. 2. Received_resp which means whether received response. There may possible mismatches of the following situation: 1. VF sends message A with code=1 subcode=1. 2. PF was blocked about 500ms when processing the message A. 3. VF will detect message A timeout because it can't get the response within 500ms. 4. VF sends message B with code=1 subcode=1 which equal message A. 5. PF processes the first message A and send the response message to VF. 6. VF will identify the response matched the message B because the code/subcode is the same. This will lead to mismatch of request and response. To fix the above bug, we use the following scheme: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. As for PF driver, it only needs to copy the match_id from request to response. Fixes: dde1a86e ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Chengwen Feng <fengchengwen@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pierre-Louis Bossart authored
[ Upstream commit 114613f6 ] We missed the fact that ElkhartLake platforms have two different PCI IDs. We only added one so the SOF driver is never selected by the autodetection logic for the missing configuration. BugLink: https://github.com/thesofproject/linux/issues/2990 Fixes: cc8f81c7 ('ALSA: hda: fix intel DSP config') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210719231746.557325-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 6f20c8ad ] tfo_active_disable_stamp is read and written locklessly. We need to annotate these accesses appropriately. Then, we need to perform the atomic_inc(tfo_active_disable_times) after the timestamp has been updated, and thus add barriers to make sure tcp_fastopen_active_should_disable() wont read a stale timestamp. Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit b16f3299 ] Building on ARCH=arc causes a "redefined" warning, so rename this driver's CACHE_LINE_MASK to avoid the warning. ../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined 134 | #define CACHE_LINE_MASK 0x3F In file included from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:19, from ../include/linux/list.h:9, from ../include/linux/module.h:12, from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7: ../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition 17 | #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) Fixes: d413779c ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Somnath Kotur authored
[ Upstream commit 11a39259 ] bnxt_half_open_nic() is called during during ethtool self test and is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_half_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The ethtool self test will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_half_open_nic() were to continue in this error state, it may crash like this: bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Process ethtool (pid: 333327, stack limit = 0x0000000046476577) Call trace: bnxt_alloc_mem+0x444/0xef0 [bnxt_en] bnxt_half_open_nic+0x24/0xb8 [bnxt_en] bnxt_self_test+0x2dc/0x390 [bnxt_en] ethtool_self_test+0xe0/0x1f8 dev_ethtool+0x1744/0x22d0 dev_ioctl+0x190/0x3e0 sock_ioctl+0x238/0x480 do_vfs_ioctl+0xc4/0x758 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_handler+0xb0/0x180 el0_svc+0x8/0xc Fixes: a1301f08 ("bnxt_en: Check abort error state in bnxt_open_nic().") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Chan authored
[ Upstream commit 96bdd4b9 ] Only pass supported VLAN protocol IDs for stripped VLAN tags to the stack. The stack will hit WARN() if the protocol ID is unsupported. Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100. Only the 1st two protocols are supported by the kernel. Fixes: a196e96b ("bnxt_en: clean up VLAN feature bit handling") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Chan authored
[ Upstream commit 6cd657cb ] In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after we acquire the rtnl_lock. If the flag is set, we need to abort. Fixes: 230d1f0d ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Chan authored
[ Upstream commit 2c9f046b ] The capabilities can change after firmware upgrade/downgrade, so we should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe() is called. Fixes: 2151fe08 ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kalesh AP authored
[ Upstream commit c81cfb62 ] If device is already disabled in reset path and PCI io error is detected before the device could be enabled, driver could call pci_disable_device() for already disabled device. Fix this problem by calling pci_disable_device() only if the device is already enabled. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Robert Richter authored
[ Upstream commit d2cbbf1f ] During a rework of initramfs code the INITRAMFS_COMPRESSION config option was removed in commit 65e00e04. A leftover as a dependency broke the config option ACPI_TABLE_OVERRIDE_VIA_ BUILTIN_INITRD that is used to enable the overriding of ACPI tables from built-in initrd. Fixing the dependency. Fixes: 65e00e04 ("initramfs: refactor the initramfs build rules") Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Marek Vasut authored
[ Upstream commit 56912da7 ] The original implementation of RPM handling in probe() was mostly correct, except it failed to call pm_runtime_get_*() to activate the hardware. The subsequent fix, 734882a8 ("spi: cadence: Correct initialisation of runtime PM"), breaks the implementation further, to the point where the system using this hard IP on ZynqMP hangs on boot, because it accesses hardware which is gated off. Undo 734882a8 ("spi: cadence: Correct initialisation of runtime PM") and instead add missing pm_runtime_get_noresume() and move the RPM disabling all the way to the end of probe(). That makes ZynqMP not hang on boot yet again. Fixes: 734882a8 ("spi: cadence: Correct initialisation of runtime PM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dmitry Bogdanov authored
[ Upstream commit 6d8e7e7c ] WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Mike Christie authored
[ Upstream commit e746f345 ] A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when iscsi_iface_attr_is_visible tries to figure out the type by just checking the value, we can collide and return the wrong type. When we call into the driver we might not match and return that we don't want attr visible in sysfs. The patch fixes this by setting the type when we figure out what the param is. Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com Fixes: 3e0f65b3 ("[SCSI] iscsi_transport: Additional parameters for network settings") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nguyen Dinh Phi authored
[ Upstream commit 517a16b1 ] Commit 63346650 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: <syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com> Fixes: 63346650 ("netrom: switch to sock timer API") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 2f3fdd8d ] After commit ca84bd05 ("sctp: copy the optval from user space in sctp_setsockopt"), it does memory allocation in sctp_setsockopt with the optlen, and it would fail the allocation and return error if the optlen from user space is a huge value. This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and SCTP_AUTH_KEY, as when processing these sockopts before, optlen would be trimmed to a biggest value it needs when optlen is a huge value, instead of failing the allocation and returning error. This patch is to fix the allocation failure when it's a huge optlen from user space by trimming it to the biggest size sctp sockopt may need when necessary, and this biggest size is from sctp_setsockopt_reset_streams() for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT and SCTP_AUTH_KEY. Fixes: ca84bd05 ("sctp: copy the optval from user space in sctp_setsockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit f5051bce ] Syzbot reported memory leak in tcindex_set_parms(). The problem was in non-freed perfect hash in tcindex_partial_destroy_work(). In tcindex_set_parms() new tcindex_data is allocated and some fields from old one are copied to new one, but not the perfect hash. Since tcindex_partial_destroy_work() is the destroy function for old tcindex_data, we need to free perfect hash to avoid memory leak. Reported-and-tested-by: <syzbot+f0bbb2287b8993d4fa74@syzkaller.appspotmail.com> Fixes: 331b7292 ("net: sched: RCU cls_tcindex") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicholas Piggin authored
[ Upstream commit bc4188a2 ] vcpu_put is not called if the user copy fails. This can result in preempt notifier corruption and crashes, among other issues. Fixes: b3cebfe8 ("KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210716024310.164448-2-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicholas Piggin authored
[ Upstream commit bd31ecf4 ] When running CPU_FTR_P9_TM_HV_ASSIST, HFSCR[TM] is set for the guest even if the host has CONFIG_TRANSACTIONAL_MEM=n, which causes it to be unprepared to handle guest exits while transactional. Normal guests don't have a problem because the HTM capability will not be advertised, but a rogue or buggy one could crash the host. Fixes: 4bb3c7a0 ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210716024310.164448-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Yajun Deng authored
[ Upstream commit 5f119ba1 ] The release_sock() is blocking function, it would change the state after sleeping. use wait_woken() instead. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michal Suchanek authored
[ Upstream commit 674a9f1f ] Missing TPM final event log table is not a firmware bug. Clearly if providing event log in the old format makes the final event log invalid it should not be provided at least in that case. Fixes: b4f1874c ("tpm: check event log version before reading final events") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Roman Skakun authored
[ Upstream commit 40ac971e ] xen-swiotlb can use vmalloc backed addresses for dma coherent allocations and uses the common helpers. Properly handle them to unbreak Xen on ARM platforms. Fixes: 1b65c4e5 ("swiotlb-xen: use xen_alloc/free_coherent_pages") Signed-off-by: Roman Skakun <roman_skakun@epam.com> Reviewed-by: Andrii Anisov <andrii_anisov@epam.com> [hch: split the patch, renamed the helpers] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dongliang Mu authored
[ Upstream commit a6ecfb39 ] The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: <syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com> Fixes: 5fcfb6d0 ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ziyang Xuan authored
[ Upstream commit 991e6343 ] When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline] Reported-by: <syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8 Fixes: bece7b23 ("caif: Rewritten socket implementation") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tobias Klauser authored
[ Upstream commit d444b06e ] Fix and add a missing NULL check for the prior malloc() call. Fixes: 49a086c2 ("bpftool: implement prog load command") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20210715110609.29364-1-tklauser@distanz.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jakub Sitnicki authored
[ Upstream commit 54ea2f49 ] The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the UDP proto handlers to late_initcall. This way it is initialized after UDP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: edc6741c ("bpf: Add sockmap hooks for UDP sockets") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20210714154750.528206-1-jakub@cloudflare.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Fastabend authored
[ Upstream commit 228a4a7b ] The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the TCP proto handlers to late_initcall. This way it is initialized after TCP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Fastabend authored
[ Upstream commit 7e6b27a6 ] If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review. Fixes: 4363023d ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
-