- Jun 09, 2023
-
-
Matthieu Baerts authored
commit 46565acd upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: df62f2ec ("selftests/mptcp: add diag interface tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthieu Baerts authored
commit d328fe87 upstream. BusyBox's 'cmp' command doesn't support the '--bytes' parameter. Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test failing [1] because their 'cmp' command doesn't support this '--bytes' option: cmp: unrecognized option '--bytes=1024' BusyBox v1.35.0 () multi-call binary. Usage: cmp [-ls] [-n NUM] FILE1 [FILE2] Instead, 'head --bytes' can be used as this option is supported by BusyBox. A temporary file is needed for this operation. Because it is apparently quite common to use BusyBox, it is certainly better to backport this fix to impacted kernels. Fixes: 6bf41020 ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1] Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthieu Baerts authored
commit 715c78a8 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: b08fbf24 ("selftests: add test-cases for MPTCP MP_JOIN") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthieu Baerts authored
commit 0f4955a4 upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685 ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthieu Baerts authored
commit d83013bd upstream. Selftests are supposed to run on any kernels, including the old ones not supporting MPTCP. A new check is then added to make sure MPTCP is supported. If not, the test stops and is marked as "skipped". Note that this check can also mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env var is set to 1: by doing that, we can make sure a test is not being skipped by mistake. A new shared file is added here to be able to re-used the same check in the different selftests we have. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pietro Borrello authored
commit 81d0fa4c upstream. All callers of trace_probe_primary_from_call() check the return value to be non NULL. However, the function returns list_first_entry(&tpe->probes, ...) which can never be NULL. Additionally, it does not check for the list being possibly empty, possibly causing a type confusion on empty lists. Use list_first_entry_or_null() which solves both problems. Link: https://lore.kernel.org/linux-trace-kernel/20230128-list-entry-null-check-v1-1-8bde6a3da2ef@diag.uniroma1.it/ Fixes: 60d53e2c ("tracing/probe: Split trace_event related data from trace_probe") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit e30fbc61 upstream. Modifiers are used to change the behavior of keys. For instance, they can grouped into buckets, converted to syscall names (from the syscall identifier), show task->comm of the current pid, be an array of longs that represent a stacktrace, and more. It was found that nothing stopped a value from taking a modifier. As values are simple counters. If this happened, it would call code that was not expecting a modifier and crash the kernel. This was fixed by having the ___create_val_field() function test if a modifier was present and fail if one was. This fixed the crash. Now there's a problem with variables. Variables are used to pass fields from one event to another. Variables are allowed to have some modifiers, as the processing may need to happen at the time of the event (like stacktraces and comm names of the current pid). The issue is that it too uses __create_val_field(). Now that fails on modifiers, variables can no longer use them (this is a regression). As not all modifiers are for variables, have them use a separate check. Link: https://lore.kernel.org/linux-trace-kernel/20230523221108.064a5d82@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Fixes: e0213434 ("tracing: Do not let histogram values have some modifiers") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Bristot de Oliveira authored
commit 632478a0 upstream. While testing rtla timerlat auto analysis, I reach a condition where the interface was not receiving tracing data. I was able to manually reproduce the problem with these steps: # echo 0 > tracing_on # disable trace # echo 1 > osnoise/stop_tracing_us # stop trace if timerlat irq > 1 us # echo timerlat > current_tracer # enable timerlat tracer # sleep 1 # wait... that is the time when rtla # apply configs like prio or cgroup # echo 1 > tracing_on # start tracing # cat trace # tracer: timerlat # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # ||||| ACTIVATION # TASK-PID CPU# ||||| TIMESTAMP ID CONTEXT LATENCY # | | | ||||| | | | | NOTHING! Then, trying to enable tracing again with echo 1 > tracing_on resulted in no change: the trace was still not tracing. This problem happens because the timerlat IRQ hits the stop tracing condition while tracing is off, and do not wake up the timerlat thread, so the timerlat threads are kept sleeping forever, resulting in no trace, even after re-enabling the tracer. Avoid this condition by always waking up the threads, even after stopping tracing, allowing the tracer to return to its normal operating after a new tracing on. Link: https://lore.kernel.org/linux-trace-kernel/1ed8f830638b20a39d535d27d908e319a9a3c4e2.1683822622.git.bristot@kernel.org Cc: Juri Lelli <juri.lelli@redhat.com> Cc: stable@vger.kernel.org Fixes: a955d7ea ("trace: Add timerlat tracer") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 0ea923f4 upstream. The addition of the mtdchar_read_ioctl() function caused the stack usage of mtdchar_ioctl() to grow beyond the warning limit on 32-bit architectures with gcc-13: drivers/mtd/mtdchar.c: In function 'mtdchar_ioctl': drivers/mtd/mtdchar.c:1229:1: error: the frame size of 1488 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Mark both the read and write portions as noinline_for_stack to ensure they don't get inlined and use separate stack slots to reduce the maximum usage, both in the mtdchar_ioctl() and combined with any of its callees. Fixes: 095bb6e4 ("mtdchar: add MEMREAD ioctl") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230417205654.1982368-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Moore authored
commit 42c4e97e upstream. The Linux Kernel currently only requires make v3.82 while the grouped target functionality requires make v4.3. Removed the grouped target introduced in 4ce1f694 ("selinux: ensure av_permissions.h is built when needed") as well as the multiple header file targets in the make rule. This effectively reverts the problem commit. We will revisit this change when make >= 4.3 is required by the rest of the kernel. Cc: stable@vger.kernel.org Fixes: 4ce1f694 ("selinux: ensure av_permissions.h is built when needed") Reported-by: Erwan Velu <e.velu@criteo.com> Reported-by: Luiz Capitulino <luizcap@amazon.com> Tested-by: Luiz Capitulino <luizcap@amazon.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ben Noordhuis authored
commit 4ea0bf4b upstream. Libuv recently started using it so there is at least one consumer now. Cc: stable@vger.kernel.org Fixes: 61a2732a ("io_uring: deprecate epoll_ctl support") Link: https://github.com/libuv/libuv/pull/3979 Signed-off-by: Ben Noordhuis <info@bnoordhuis.nl> Link: https://lore.kernel.org/r/20230506095502.13401-1-info@bnoordhuis.nl Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ism Hong authored
commit 9a7e8ec0 upstream. For RISC-V, when tracing with tracepoint events, the IP and status are set to 0, preventing the perf code parsing the callchain and resolving the symbols correctly. ./ply 'tracepoint:kmem/kmem_cache_alloc { @[stack]=count(); }' @: { <STACKID4294967282> }: 1 The fix is to implement perf_arch_fetch_caller_regs for riscv, which fills several necessary registers used for callchain unwinding, including epc, sp, s0 and status. It's similar to commit b3eac026 ("arm: perf: Fix callchain parse error with kernel tracepoint events") and commit 5b09a094 ("arm64: perf: Fix callchain parse error with kernel tracepoint events"). With this patch, callchain can be parsed correctly as: ./ply 'tracepoint:kmem/kmem_cache_alloc { @[stack]=count(); }' @: { __traceiter_kmem_cache_alloc+68 __traceiter_kmem_cache_alloc+68 kmem_cache_alloc+354 __sigqueue_alloc+94 __send_signal_locked+646 send_signal_locked+154 do_send_sig_info+84 __kill_pgrp_info+130 kill_pgrp+60 isig+150 n_tty_receive_signal_char+36 n_tty_receive_buf_standard+2214 n_tty_receive_buf_common+280 n_tty_receive_buf2+26 tty_ldisc_receive_buf+34 tty_port_default_receive_buf+62 flush_to_ldisc+158 process_one_work+458 worker_thread+138 kthread+178 riscv_cpufeature_patch_func+832 }: 1 Signed-off-by: Ism Hong <ism.hong@gmail.com> Link: https://lore.kernel.org/r/20230601095355.1168910-1-ism.hong@gmail.com Fixes: 178e9fc4 ("perf: riscv: preliminary RISC-V support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Rosin authored
commit e14fd2af upstream. Some chips have two bits (e.g SAMA5D3), and some have three (e.g. SAM9G45). A field width of three is compatible as long as valid values are used for the different chips. There is no current use of any value needing three bits, so the fixed bug is relatively benign. Fixes: d8840a7e ("dmaengine: at_hdmac: Use bitfield access macros") Cc: stable@vger.kernel.org Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/e2c898ba-c3a3-5dd3-384b-0585661c79f2@axentia.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Rosin authored
commit 2a6c7e8c upstream. The MSB part of the peripheral IDs need to go into the ATC_SRC_PER_MSB and ATC_DST_PER_MSB fields. Not the LSB part. This fixes a severe regression for TSE-850 devices (compatible axentia,tse850v3) where output to the audio I2S codec (the main purpose of the device) simply do not work. Fixes: d8840a7e ("dmaengine: at_hdmac: Use bitfield access macros") Cc: stable@vger.kernel.org Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/01e5dae1-d4b0-cf31-516b-423b11b077f1@axentia.se Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Tissoires authored
commit 7c28afd5 upstream. It seems we forgot the normal case to terminate the retry loop, making us asking 3 times each command, which is probably a little bit too much. And remove the ugly "goto exit" that can be replaced by a simpler "break" Fixes: 586e8fed ("HID: logitech-hidpp: Retry commands when device is busy") Suggested-by: Mark Lord <mlord@pobox.com> Tested-by: Mark Lord <mlord@pobox.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sasha Levin authored
[ Upstream commit 45c2f368 ] When I implemented the storage layer bio splitting, I was under the assumption that we'll never split metadata bios. But Qu reminded me that this can actually happen with very old file systems with unaligned metadata chunks and RAID0. I still haven't seen such a case in practice, but we better handled this case, especially as it is fairly easily to do not calling the ->end_іo method directly in btrfs_end_io_work, and using the proper btrfs_orig_bbio_end_io helper instead. In addition to the old file system with unaligned metadata chunks case documented in the commit log, the combination of the new scrub code with Johannes pending raid-stripe-tree also triggers this case. We spent some time debugging it and found that this patch solves the problem. Fixes: 103c1972 ("btrfs: split the bio submission path into a separate file") CC: stable@vger.kernel.org # 6.3+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ekansh Gupta authored
[ Upstream commit a6e766de ] If a map request is made with securemap attribute, the memory ownership needs to be reassigned to new VMID to allow access from protection domain. Currently only DSP VMID is passed to the reassign call which is incorrect as only a combination of HLOS and DSP VMID is allowed for memory ownership reassignment and passing only DSP VMID will cause assign call failure. Also pass proper restoring permissions to HLOS as the source permission will now carry both HLOS and DSP VMID permission. Change is also made to get valid physical address from scatter/gather for this allocation request. Fixes: e90d9119 ("misc: fastrpc: Add support to secure memory map") Cc: stable <stable@kernel.org> Tested-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Elliot Berman authored
[ Upstream commit 968a26a0 ] The maximum VMID for assign_mem is 63. Use a u64 to represent this bitmap instead of architecture-dependent "unsigned int" which varies in size on 32-bit and 64-bit platforms. Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k) Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com Stable-dep-of: a6e766de ("misc: fastrpc: Pass proper scm arguments for secure map request") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Lucas De Marchi authored
commit fadb74f9 upstream. While implementing support for in-kernel decompression in kmod, finit_module() was returning a very suspicious value: finit_module(3, "", MODULE_INIT_COMPRESSED_FILE) = 18446744072717407296 It turns out the check for module_get_next_page() failing is wrong, and hence the decompression was not really taking place. Invert the condition to fix it. Fixes: 169a58ad ("module/decompress: Support zstd in-kernel decompression") Cc: stable@kernel.org Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lino Sanfilippo authored
commit 4ecd704a upstream. With commit 858e8b79 ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts") bit accessor functions are used to access flags in tpm_tis_data->flags. However these functions expect bit numbers, while the flags are defined as bit masks in enum tpm_tis_flag. Fix this inconsistency by using numbers instead of masks also for the flags in the enum. Reported-by: Pavel Machek <pavel@denx.de> Fixes: 858e8b79 ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Cc: stable@vger.kernel.org Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jon Pan-Doh authored
commit 2212fc2a upstream. When running on an AMD vIOMMU, we observed multiple invalidations (of decreasing power of 2 aligned sizes) when unmapping a single page. Domain flush takes gather bounds (end-start) as size param. However, gather->end is defined as the last inclusive address (start + size - 1). This leads to an off by 1 error. With this patch, verified that 1 invalidation occurs when unmapping a single page. Fixes: a270be1b ("iommu/amd: Use only natural aligned flushes in a VM") Cc: stable@vger.kernel.org # >= 5.15 Signed-off-by: Jon Pan-Doh <pandoh@google.com> Tested-by: Sudheer Dantuluri <dantuluris@google.com> Suggested-by: Gary Zibrat <gzibrat@google.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Acked-by: Nadav Amit <namit@vmware.com> Link: https://lore.kernel.org/r/20230426203256.237116-1-pandoh@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gaurav Batra authored
commit 9d2ccf00 upstream. Currently in tce_freemulti_pSeriesLP() there is no limit on how many TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue until now, but newer firmware releases have started enforcing a limit of 512 TCEs per call. The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3). The code has been in it's current form since it was initially merged. Cc: stable@vger.kernel.org Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> [mpe: Tweak change log wording & add PAPR reference] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 47fe1c30 upstream. The scsi driver function sd_read_block_characteristics() always calls disk_set_zoned() to a disk zoned model correctly, in case the device model changed. This is done even for regular disks to set the zoned model to BLK_ZONED_NONE and free any zone related resources if the drive previously was zoned. This behavior significantly impact the time it takes to revalidate disks on a large system as the call to disk_clear_zone_settings() done from disk_set_zoned() for the BLK_ZONED_NONE case results in the device request queued to be frozen, even if there are no zone resources to free. Avoid this overhead for non-zoned devices by not calling disk_clear_zone_settings() in disk_set_zoned() if the device model was already set to BLK_ZONED_NONE, which is always the case for regular devices. Reported by: Brian Bunker <brian@purestorage.com> Fixes: 508aebb8 ("block: introduce blk_queue_clear_zone_settings()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230529073237.1339862-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit e42f1107 upstream. The init counter is not decremented on initialisation errors, which prevents retrying initialisation. Add the missing decrement on initialisation errors so that the counter reflects the state of the device. Fixes: e78f3d15 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230502103810.12061-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 9bf03a0c upstream. The init counter is not decremented on initialisation errors, which prevents retrying initialisation and can lead to the runtime suspend callback attempting to disable resources that have never been enabled. Add the missing decrement on initialisation errors so that the counter reflects the state of the device. Fixes: e78f3d15 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230502103810.12061-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
pengfuyuan authored
commit 5ad9b471 upstream. When compiling on a MIPS 64-bit machine we get these warnings: In file included from ./arch/mips/include/asm/cacheflush.h:13, from ./include/linux/cacheflush.h:5, from ./include/linux/highmem.h:8, from ./include/linux/bvec.h:10, from ./include/linux/blk_types.h:10, from ./include/linux/blkdev.h:9, from fs/btrfs/disk-io.c:7: fs/btrfs/disk-io.c: In function ‘csum_tree_block’: fs/btrfs/disk-io.c:100:34: error: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Werror=array-bounds] 100 | kaddr = page_address(buf->pages[i]); | ~~~~~~~~~~^~~ ./include/linux/mm.h:2135:48: note: in definition of macro ‘page_address’ 2135 | #define page_address(page) lowmem_page_address(page) | ^~~~ cc1: all warnings being treated as errors We can check if i overflows to solve the problem. However, this doesn't make much sense, since i == 1 and num_pages == 1 doesn't execute the body of the loop. In addition, i < num_pages can also ensure that buf->pages[i] will not cross the boundary. Unfortunately, this doesn't help with the problem observed here: gcc still complains. To fix this add a compile-time condition for the extent buffer page array size limit, which would eventually lead to eliminating the whole for loop. CC: stable@vger.kernel.org # 5.10+ Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sherry Sun authored
commit 2474e054 upstream. LPUART IP now has two known bugs, one is that CTS has higher priority than the break signal, which causes the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. It exists on all platforms we support in this driver. So we add a workaround patch for this issue: commit c4c81db5 ("tty: serial: fsl_lpuart: disable the CTS when send break signal"). Another IP bug is i.MX8QM LPUART may have an additional break character being sent after SBK was cleared. It may need to add some delay between clearing SBK and re-enabling CTS to ensure that the SBK latch are completely cleared. But we found that during the delay period before CTS is enabled, there is still a risk that Bluetooth data in TX FIFO may be sent out during this period because of break off and CTS disabled(even if BT sets CTS line deasserted, data is still sent to BT). Due to this risk, we have to drop the CTS-disabling workaround for SBK bugs, use TXINV seems to be a better way to replace SBK feature and avoid above risk. Also need to disable the transmitter to prevent any data from being sent out during break, then invert the TX line to send break. Then disable the TXINV when turn off break and re-enable transmitter. Fixes: c4c81db5 ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Vasut authored
commit 0b5d5c43 upstream. Chapter "5.3 Power-Up/Down Sequence" of WILC1000 [1] and WILC3000 [2] states that CHIP_EN must be pulled HIGH first, RESETN second. Fix the order of these signals in the driver. Use the mmc_pwrseq_ops as driver data as the delay between signals is specific to SDIO card type anyway. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/WSG/ProductDocuments/DataSheets/ATWILC1000-MR110XB-IEEE-802.11-b-g-n-Link-Controller-Module-DS70005326E.pdf [2] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/IEEE-802.11-b-g-n-Link-Controller-Module-with-Integrated-Bluetooth-5.0-DS70005327B.pdf Fixes: b2832b96 ("mmc: pwrseq: sd8787: add support for wilc1000") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230513192352.479627-1-marex@denx.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Deren Wu authored
commit a99d21ce upstream. We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7b ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Huang authored
commit 55e02c14 upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk and pp_dpm_fclk for renoir. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Huang authored
commit f1373a97 upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk and pp_dpm_fclk. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels that from the DFPstateTable are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Huang authored
commit c1d35412 upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels that from the DFPstateTable are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guchun Chen authored
commit e490d60a upstream. During reboot test on arm64 platform, it may failure on boot. The error message are as follows: [ 1.706570][ 3] [ T273] [drm:si_thermal_enable_alert [amdgpu]] *ERROR* Could not enable thermal interrupts. [ 1.716547][ 3] [ T273] [drm:amdgpu_device_ip_late_init [amdgpu]] *ERROR* late_init of IP block <si_dpm> failed -22 [ 1.727064][ 3] [ T273] amdgpu 0000:02:00.0: amdgpu_device_ip_late_init failed [ 1.734367][ 3] [ T273] amdgpu 0000:02:00.0: Fatal error during GPU init v2: squash in built warning fix (Alex) Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Huang authored
commit bfc03568 upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk and pp_dpm_fclk. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels that from the DFPstateTable are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tim Huang authored
commit 6a07826f upstream. This patch reverses the DPM clocks levels output of pp_dpm_mclk and pp_dpm_fclk. On dGPUs and older APUs we expose the levels from lowest clocks to highest clocks. But for some APUs, the clocks levels that from the DFPstateTable are given the reversed orders by PMFW. Like the memory DPM clocks that are exposed by pp_dpm_mclk. It's not intuitive that they are reversed on these APUs. All tools and software that talks to the driver then has to know different ways to interpret the data depending on the asic. So we need to reverse them to expose the clocks levels from the driver consistently. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ikshwaku Chauhan authored
commit 663b930e upstream. Add IP GC 11.0.1 in the list of target to have tmz enabled by default. Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 7f875850 upstream. For devices not attached to a port multiplier and managed directly by libata, the device number passed to ata_find_dev() must always be lower than the maximum number of devices returned by ata_link_max_devices(). That is 1 for SATA devices or 2 for an IDE link with master+slave devices. This device number is the SCSI device ID which matches these constraints as the IDs are generated per port and so never exceed the maximum number of devices for the link being used. However, for libsas managed devices, SCSI device IDs are assigned per struct scsi_host, leading to device IDs for SATA devices that can be well in excess of libata per-link maximum number of devices. This results in ata_find_dev() to always return NULL for libsas managed devices except for the first device of the target scsi_host with ID (device number) equal to 0. This issue is visible by executing the hdparm utility, which fails. E.g.: hdparm -i /dev/sdX /dev/sdX: HDIO_GET_IDENTITY failed: No message of desired type Fix this by rewriting ata_find_dev() to ignore the device number for non-PMP attached devices with a link with at most 1 device, that is SATA devices. For these, the device number 0 is always used to return the correct pointer to the struct ata_device of the port link. This change excludes IDE master/slave setups (maximum number of devices per link is 2) and port-multiplier attached devices. Also, to be consistant with the fact that SCSI device IDs and channel numbers used as device numbers are both unsigned int, change the devno argument of ata_find_dev() to unsigned int. Reported-by: Xingui Yang <yangxingui@huawei.com> Fixes: 41bda9c9 ("libata-link: update hotplug to handle PMP links") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bart Van Assche authored
commit 6d074ce2 upstream. gcc 13 may assign another type to enumeration constants than gcc 12. Split the large enum at the top of source file stex.c such that the type of the constants used in time expressions is changed back to the same type chosen by gcc 12. This patch suppresses compiler warnings like this one: In file included from ./include/linux/bitops.h:7, from ./include/linux/kernel.h:22, from drivers/scsi/stex.c:13: drivers/scsi/stex.c: In function ‘stex_common_handshake’: ./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror] 12 | (void)(&__dummy == &__dummy2); \ | ^~ ./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’ 106 | typecheck(unsigned long, b) && \ | ^~~~~~~~~ drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’ 1035 | if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) { | ^~~~~~~~~~ See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405 . Cc: stable@vger.kernel.org Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Acayan authored
commit 46248400 upstream. The channel's rpmsg object allows new invocations to be made. After old invocations are already interrupted, the driver shouldn't try to invoke anymore. Invalidating the rpmsg at the end of the driver removal function makes it easy to cause a race condition in userspace. Even closing a file descriptor before the driver finishes its cleanup can cause an invocation via fastrpc_release_current_dsp_process() and subsequent timeout. Invalidate the channel before the invocations are interrupted to make sure that no invocations can be created to hang after the device closes. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Acayan authored
commit b6a06285 upstream. The return value is initialized as -1, or -EPERM. The completion of an invocation implies that the return value is set appropriately, but "Permission denied" does not accurately describe the outcome of the invocation. Set the invocation's return value to a more appropriate "Broken pipe", as the cleanup breaks the driver's connection with rpmsg. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-