- Mar 16, 2022
-
-
Jon Lin authored
[ Upstream commit 80808768 ] After slave abort, all DMA should be stopped, or it will affect the next transmission and maybe abort again. Signed-off-by:
Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jon Lin authored
[ Upstream commit 9382df0a ] Get num-cs u32 from dts of_node property rather than u16. Signed-off-by:
Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Anton Romanov authored
[ Upstream commit 3a55f729 ] If vcpu has tsc_always_catchup set each request updates pvclock data. KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on host's side and do hypercall inside pvclock_read_retry loop leading to infinite loop in such situation. v3: Removed warn Changed return code to KVM_EFAULT v2: Added warn Signed-off-by:
Anton Romanov <romanton@google.com> Message-Id: <20220216182653.506850-1-romanton@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wanpeng Li authored
[ Upstream commit 4cb9a998 ] I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: <TASK> syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 6f66db29 ] It appears that last minute change moved ACPI ID of Alder Lake-M to the INTC1055, which is already in the driver. This ID on the other hand will be used elsewhere. This reverts commit 258435a1 . Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heikki Krogerus authored
[ Upstream commit 038438a2 ] This patch adds the necessary PCI ID for Intel Raptor Lake-S devices. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220214141948.18637-1-heikki.krogerus@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Halil Pasic authored
[ Upstream commit ddbd89de ] The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599a ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kumar Kartikeya Dwivedi authored
[ Upstream commit a7e75016 ] Add a test that validates that timer value is not overwritten when doing a copy_map_value call in the kernel. Without the prior fix, this test triggers a crash. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heiner Kallweit authored
[ Upstream commit 2c87c6f9 ] Sometimes the link comes up but no data flows. This patch fixes this behavior. It's not clear what's the root cause of the issue. According to the tests one other link-up issue remains. In very rare cases the link isn't even reported as up. Fixes: 84c8f773 ("net: phy: meson-gxl: remove the use of .ack_callback()") Tested-by:
Erico Nunes <nunes.erico@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jeremy Linton authored
[ Upstream commit 00b022f8 ] Some of the bcmgenet platforms don't correctly support WOL, yet ethtool returns: "Supports Wake-on: gsf" which is false. Ideally if there isn't a wol_irq, or there is something else that keeps the device from being able to wakeup it should display: "Supports Wake-on: d" This patch checks whether the device can wakup, before using the hard-coded supported flags. This corrects the ethtool reporting, as well as the WOL configuration because ethtool verifies that the mode is supported before attempting it. Fixes: c51de7f3 ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Tested-by:
Peter Robinson <pbrobinson@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 633593a8 ] syzbot reported a kernel infoleak [1] of 4 bytes. After analysis, it turned out r->idiag_expires is not initialized if inet_sctp_diag_fill() calls inet_diag_msg_common_fill() Make sure to clear idiag_timer/idiag_retrans/idiag_expires and let inet_diag_msg_sctpasoc_fill() fill them again if needed. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 instrument_copy_to_user include/linux/instrumented.h:121 [inline] copyout lib/iov_iter.c:154 [inline] _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668 copy_to_iter include/linux/uio.h:162 [inline] simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519 __skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425 skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533 skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline] netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x795/0xa10 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3247 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248 __netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373 netlink_dump_start include/linux/netlink.h:254 [inline] inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341 sock_diag_rcv_msg+0x24a/0x620 netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] sock_write_iter+0x594/0x690 net/socket.c:1061 do_iter_readv_writev+0xa7f/0xc70 do_iter_write+0x52c/0x1500 fs/read_write.c:851 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Bytes 68-71 of 2508 are uninitialized Memory access of size 2508 starts at ffff888114f9b000 Data copied to user address 00007f7fe09ff2e0 CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Clément Léger authored
[ Upstream commit 37c9d66c ] MISR1 was cleared twice but the original author intention was probably to clear MISR1 & MISR2 to completely disable interrupts. Fix it to clear MISR2. Fixes: 87461f7a ("net: phy: DP83822 initial driver submission") Signed-off-by:
Clément Léger <clement.leger@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit 2ac5b58e ] The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 7349a74e ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mark Featherston authored
[ Upstream commit 03fe0035 ] This works around an issue with the hardware where both OE and DAT are exposed in the same register. If both are updated simultaneously, the harware makes no guarantees that OE or DAT will actually change in any given order and may result in a glitch of a few ns on a GPIO pin when changing direction and value in a single write. Setting direction to input now only affects OE bit. Setting direction to output updates DAT first, then OE. Fixes: 9c668632 ("gpio: add Technologic I2C-FPGA gpio support") Signed-off-by:
Mark Featherston <mark@embeddedTS.com> Signed-off-by:
Kris Bahnsen <kris@embeddedTS.com> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guillaume Nault authored
[ Upstream commit 94a4a4fe ] When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guillaume Nault authored
[ Upstream commit 18dfc667 ] The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit f80cfe2f ] Syzbot reported UAF in port100_send_complete(). The root case is in missing usb_kill_urb() calls on error handling path of ->probe function. port100_send_complete() accesses devm allocated memory which will be freed on probe failure. We should kill this urbs before returning an error from probe function to prevent reported use-after-free Fail log: BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935 __usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670 ... Allocated by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 alloc_dr drivers/base/devres.c:116 [inline] devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823 devm_kzalloc include/linux/device.h:209 [inline] port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502 Freed by task 1255: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] __cache_free mm/slab.c:3437 [inline] kfree+0xf8/0x2b0 mm/slab.c:3794 release_nodes+0x112/0x1a0 drivers/base/devres.c:501 devres_release_all+0x114/0x190 drivers/base/devres.c:530 really_probe+0x626/0xcc0 drivers/base/dd.c:670 Reported-and-tested-by:
<syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com> Fixes: 0347a6ab ("NFC: port100: Commands mechanism implementation") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roi Dayan authored
[ Upstream commit ad11c4f1 ] There could be multiple multipath entries but changing the port affinity for each one doesn't make much sense and there should be a default one. So only track the entry with lowest priority value. The commit doesn't affect existing users with a single entry. Fixes: 544fe7c2 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Moshe Shemesh authored
[ Upstream commit 063bd355 ] Fix a refcount use after free warning due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process released its refcount but didn't release the index yet. Fix it by adding the needed spin lock. It fixes the following warning trace: refcount_t: addition on 0; use-after-free. WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0 ... RIP: 0010:refcount_warn_saturate+0x80/0xe0 ... Call Trace: <TASK> mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core] mlx5_cmd_flush+0x3a/0xf0 [mlx5_core] enter_error_state+0x44/0x80 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core] process_one_work+0x1be/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x141/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> Fixes: 50b2412b ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mohammad Kabat authored
[ Upstream commit ac77998b ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682b ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by:
Mohammad Kabat <mohammadkab@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Duoming Zhou authored
[ Upstream commit 71171ac8 ] When two ax25 devices attempted to establish connection, the requester use ax25_create(), ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding fail log is shown below: =============================================================== BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290 Call Trace: ... ax25_device_event+0xfd/0x290 raw_notifier_call_chain+0x5e/0x70 dev_close_many+0x174/0x220 unregister_netdevice_many+0x1f7/0xa60 unregister_netdevice_queue+0x12f/0x170 unregister_netdev+0x13/0x20 mkiss_close+0xcd/0x140 tty_ldisc_release+0xc0/0x220 tty_release_struct+0x17/0xa0 tty_release+0x62d/0x670 ... This patch add condition check in ax25_kill_by_device(). If s->sk is NULL, it will goto if branch to kill device. Fixes: 4e0f718d ("ax25: improve the incomplete fix to avoid UAF and NPD bugs") Reported-by:
Thomas Osterried <thomas@osterried.de> Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit c9ffa3e2 ] This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: 501ef306 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit 2169b792 ] As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: b7370112 ("lpc32xx: Added ethernet driver") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit 6babfc6e ] As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 8a2c9a5a ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tung Nguyen authored
[ Upstream commit c79fcc27 ] When receiving a state message, function tipc_link_validate_msg() is called to validate its header portion. Then, its data portion is validated before it can be accessed correctly. However, current data sanity check is done after the message header is accessed to update some link variables. This commit fixes this issue by moving the data sanity check to the beginning of state message handling and right after the header sanity check. Fixes: 9aa422ad ("tipc: improve size validations for received domain records") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miaoqian Lin authored
[ Upstream commit b19ab4b3 ] This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do. Fixes: 5cdaaa12 ("net: emaclite: adding MDIO and phy lib support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jedrzej Jagielski authored
[ Upstream commit ad35ffa2 ] Change curr_link_speed advertised speed, due to link_info.link_speed is not equal phy.curr_user_speed_req. Without this patch it is impossible to set advertised speed to same as link_speed. Testing Hints: Try to set advertised speed to 25G only with 25G default link (use ethtool -s 0x80000000) Fixes: 48cb27f2 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by:
Grzegorz Siwik <grzegorz.siwik@intel.com> Signed-off-by:
Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 3d97f1af ] ice_misc_intr() is an irq handler. It should not sleep. Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory. Fixes: 348048e7 ("ice: Implement iidc operations") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by:
Leszek Kaliszczuk <leszek.kaliszczuk@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dave Ertman authored
[ Upstream commit 97b01291 ] When a bonded interface is destroyed, .ndo_change_mtu can be called during the tear-down process while the RTNL lock is held. This is a problem since the auxiliary driver linked to the LAN driver needs to be notified of the MTU change, and this requires grabbing a device_lock on the auxiliary_device's dev. Currently this is being attempted in the same execution context as the call to .ndo_change_mtu which is causing a dead-lock. Move the notification of the changed MTU to a separate execution context (watchdog service task) and eliminate the "before" notification. Fixes: 348048e7 ("ice: Implement iidc operations") Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jacob Keller authored
[ Upstream commit 79498d5a ] The ice_vc_send_msg_to_vf function has logic to detect "failure" responses being sent to a VF. If a VF is sent more than ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled. Almost identical logic also existed in the i40e driver. This logic was added to the ice driver in commit 1071a835 ("ice: Implement virtchnl commands for AVF support") which itself copied from the i40e implementation in commit 5c3c48ac ("i40e: implement virtual device interface"). Neither commit provides a proper explanation or justification of the check. In fact, later commits to i40e changed the logic to allow bypassing the check in some specific instances. The "logic" for this seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lack of resources, etc. Additionally, this causes the PF to log an info message for every failed VF response which may confuse users, and can spam the kernel log. This behavior is not documented as part of any requirement for our products and other operating system drivers such as the FreeBSD implementation of our drivers do not include this type of check. In fact, the change from dev_err to dev_info in i40e commit 18b7af57 ("i40e: Lower some message levels") explains that these messages typically don't actually indicate a real issue. It is quite likely that a user who hits this in practice will be very confused as the VF will be disabled without an obvious way to recover. We already have robust malicious driver detection logic using actual hardware detection mechanisms that detect and prevent invalid device usage. Remove the logic since its not a documented requirement and the behavior is not intuitive. Fixes: 1071a835 ("ice: Implement virtchnl commands for AVF support") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jacob Keller authored
[ Upstream commit 5710ab79 ] The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf508 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf508 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac ("i40e: implement virtual device interface") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Michal Maloszewski authored
[ Upstream commit 2cf29e55 ] Modify netdev->features for vlan stripping based on virtual channel messages received from the PF. Change is needed to synchronize vlan strip status between PF sysfs and iavf ethtool. Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR") Signed-off-by:
Norbert Ciosek <norbertx.ciosek@intel.com> Signed-off-by:
Michal Maloszewski <michal.maloszewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Joel Stanley authored
[ Upstream commit 2f6edb6b ] Requesting quad mode for the FMC resulted in an error: &fmc { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fwqspi_default>' [ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table  This is because the quad mode pins are a group of pins, not a function. After applying this patch we can request the pins and the QSPI data lines are muxed: # cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID Fixes: f510f04c ("ARM: dts: aspeed: Add AST2600 pinmux nodes") Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au ' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Russell King (Oracle) authored
[ Upstream commit e5417cbf ] Discussing one of the tests in mt753x_phylink_validate() with Landen Chao confirms that the "||" should be "&&". Fix this. Fixes: c288575f ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jernej Skrabec authored
[ Upstream commit 9470c29f ] It turns out that DE3 manual has inverted YUV and YVU format numbers for P010 and P210. Invert them. This was tested by playing video decoded to P010 and additionally confirmed by looking at BSP driver source. Fixes: 169ca4b3 ("drm/sun4i: Add separate DE3 VI layer formats") Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit 660c619b ] It appears that GPIO ACPI library uses ACPI debounce values directly. However, the GPIO library APIs expect the debounce timeout to be in microseconds. Convert ACPI value of debounce to microseconds. While at it, document this detail where it is appropriate. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664 Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Fixes: 8dcb7a15 ("gpiolib: acpi: Take into account debounce settings") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fabio Estevam authored
[ Upstream commit c70c453a ] According to Documentation/driver-api/usb/URB.rst when a device is unplugged usb_submit_urb() returns -ENODEV. This error code propagates all the way up to usbnet_read_cmd() and usbnet_write_cmd() calls inside the smsc95xx.c driver during Ethernet cable unplug, unbind or reboot. This causes the following errors to be shown on reboot, for example: ci_hdrc ci_hdrc.1: remove, state 1 usb usb2: USB disconnect, device number 1 usb 2-1: USB disconnect, device number 2 usb 2-1.1: USB disconnect, device number 3 smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup usb 2-1.4: USB disconnect, device number 4 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Restarting system Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and __smsc95xx_phy_wait_not_busy() and do not print error messages when -ENODEV is returned. Fixes: a049a30f ("net: usb: Correct PHY handling of smsc95xx") Signed-off-by:
Fabio Estevam <festevam@denx.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tom Rix authored
[ Upstream commit d9dc0c84 ] Clang static analysis reports this issue qed_sriov.c:4727:19: warning: Assigned value is garbage or undefined ivi->max_tx_rate = tx_rate ? tx_rate : link.speed; ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ link is only sometimes set by the call to qed_iov_get_link() qed_iov_get_link fails without setting link or returning status. So change the decl to return status. Fixes: 73390ac9 ("qed*: support ndo_get_vf_config") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Steffen Klassert authored
[ Upstream commit 053c8fdf ] The xfrm{4,6}_beet_gso_segment() functions did not correctly set the SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family tunneling case. Fix this by setting these gso types. Fixes: 384a46ea ("esp4: add gso_segment for esp4 beet mode") Fixes: 7f9e40eb ("esp6: add gso_segment for esp6 beet mode") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Steffen Klassert authored
[ Upstream commit ebe48d36 ] The maximum message size that can be send is bigger than the maximum site that skb_page_frag_refill can allocate. So it is possible to write beyond the allocated buffer. Fix this by doing a fallback to COW in that case. v2: Avoid get get_order() costs as suggested by Linus Torvalds. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Reported-by:
valis <sec@valis.email> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-