- Jan 12, 2023
-
-
Smitha T Murthy authored
[ Upstream commit d8a46bc4 ] On receiving last buffer driver puts MFC to MFCINST_FINISHING state which in turn skips transferring of frame from SRC to REF queue. This causes driver to stop MFC encoding and last frame is lost. This patch guarantees safe handling of frames during MFCINST_FINISHING and correct clearing of workbit to avoid early stopping of encoding. Fixes: af935746 ("[media] MFC: Add MFC 5.1 V4L2 driver") Cc: stable@vger.kernel.org Cc: linux-fsd@tesla.com Signed-off-by:
Smitha T Murthy <smitha.t@samsung.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yazen Ghannam authored
[ Upstream commit bc1b705b ] AMD's MCA Thresholding feature counts errors of all severity levels, not just correctable errors. If a deferred error causes the threshold limit to be reached (it was the error that caused the overflow), then both a deferred error interrupt and a thresholding interrupt will be triggered. The order of the interrupts is not guaranteed. If the threshold interrupt handler is executed first, then it will clear MCA_STATUS for the error. It will not check or clear MCA_DESTAT which also holds a copy of the deferred error. When the deferred error interrupt handler runs it will not find an error in MCA_STATUS, but it will find the error in MCA_DESTAT. This will cause two errors to be logged. Check for deferred errors when handling a threshold interrupt. If a bank contains a deferred error, then clear the bank's MCA_DESTAT register. Define a new helper function to do the deferred error check and clearing of MCA_DESTAT. [ bp: Simplify, convert comment to passive voice. ] Fixes: 37d43acf ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers") Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220621155943.33623-1-yazen.ghannam@amd.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Borislav Petkov authored
[ Upstream commit 8121b8f9 ] Avoid having indirect calls and use a normal function which returns the proper MSR address based on ->smca setting. No functional changes. Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20210922165101.18951-4-bp@alien8.de Stable-dep-of: bc1b705b ("x86/MCE/AMD: Clear DFR errors found in THR handler") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
void0red authored
[ Upstream commit 1742e1c9 ] Store the error code before freeing the extent_map. Though it's reference counted structure, in that function it's the first and last allocation so this would lead to a potential use-after-free. The error can happen eg. when chunk is stored on a missing device and the degraded mount option is missing. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721 Reported-by:
eriri <1527030098@qq.com> Fixes: adfb69af ("btrfs: add_missing_dev() should return the actual error") CC: stable@vger.kernel.org # 4.9+ Signed-off-by:
void0red <void0red@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nikolay Borisov authored
[ Upstream commit ff37c89f ] This simplifies the code flow in read_one_chunk and makes error handling when handling missing devices a bit simpler by reducing it to a single check if something went wrong. No functional changes. Reviewed-by:
Su Yue <l@damenly.su> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Stable-dep-of: 1742e1c9 ("btrfs: fix extent map use-after-free when handling missing device in read_one_chunk") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sasha Levin authored
[ Upstream commit 63d5429f ] Using strncpy() on NUL-terminated strings are deprecated. To avoid possible forming of non-terminated string strscpy() should be used. Found by Linux Verification Center (linuxtesting.org) with SVACE. CC: stable@vger.kernel.org # 4.9+ Signed-off-by:
Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sasha Levin authored
[ Upstream commit d8a5b59c ] The SM8250 only uses three clocks but the DP configuration erroneously described four clocks. In case the DP part of the PHY is initialised before the USB part, this would lead to uninitialised memory beyond the bulk-clocks array to be treated as a clock pointer as the clocks are requested based on the USB configuration. Fixes: aff188fe ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") Cc: stable@vger.kernel.org # 5.13 Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221114081346.5116-2-johan+linaro@kernel.org Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jens Axboe authored
commit 191f8453 upstream. We want to ensure that the mask related to calling do_work_pending() is within the first 16 bits. Move bits unrelated to that outside of that range, to avoid spuriously calling do_work_pending() when we don't need to. Cc: stable@vger.kernel.org Fixes: 32d59773 ("arm: add support for TIF_NOTIFY_SIGNAL") Reported-and-tested-by:
Hui Tang <tanghui20@huawei.com> Suggested-by:
Russell King (Oracle) <linux@armlinux.org.uk> Link: https://lore.kernel.org/lkml/7ecb8f3c-2aeb-a905-0d4a-aa768b9649b5@huawei.com/ Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Eric Biggers <ebiggers@google.com> commit 48a6a66d upstream. Due to several different off-by-one errors, or perhaps due to a late change in design that wasn't fully reflected in the code that was actually merged, there are several very strange constraints on how fast-commit blocks are filled with tlv entries: - tlvs must start at least 10 bytes before the end of the block, even though the minimum tlv length is 8. Otherwise, the replay code will ignore them. (BUG: ext4_fc_reserve_space() could violate this requirement if called with a len of blocksize - 9 or blocksize - 8. Fortunately, this doesn't seem to happen currently.) - tlvs must end at least 1 byte before the end of the block. Otherwise the replay code will consider them to be invalid. This quirk contributed to a bug (fixed by an earlier commit) where uninitialized memory was being leaked to disk in the last byte of blocks. Also, strangely these constraints don't apply to the replay code in e2fsprogs, which will accept any tlvs in the blocks (with no bounds checks at all, but that is a separate issue...). Given that this all seems to be a bug, let's fix it by just filling blocks with tlv entries in the natural way. Note that old kernels will be unable to replay fast-commit journals created by kernels that have this commit. Fixes: aa75f4d3 ("ext4: main fast-commit commit path") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221106224841.279231-7-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Eric Biggers <ebiggers@google.com> commit 8415ce07 upstream. As is done elsewhere in the file, build the struct ext4_fc_tl on the stack and memcpy() it into the buffer, rather than directly writing it to a potentially-unaligned location in the buffer. Fixes: aa75f4d3 ("ext4: main fast-commit commit path") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221106224841.279231-6-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Eric Biggers <ebiggers@google.com> commit 64b4a25c upstream. Validate the inode and filename lengths in fast-commit journal records so that a malicious fast-commit journal cannot cause a crash by having invalid values for these. Also validate EXT4_FC_TAG_DEL_RANGE. Fixes: aa75f4d3 ("ext4: main fast-commit commit path") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221106224841.279231-5-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Eric Biggers <ebiggers@google.com> commit 4c0d5778 upstream. Commit a80f7fcf ("ext4: fixup ext4_fc_track_* functions' signature") extended the scope of the transaction in ext4_unlink() too far, making it include the call to ext4_find_entry(). However, ext4_find_entry() can deadlock when called from within a transaction because it may need to set up the directory's encryption key. Fix this by restoring the transaction to its original scope. Reported-by:
<syzbot+1a748d0007eeac3ab079@syzkaller.appspotmail.com> Fixes: a80f7fcf ("ext4: fixup ext4_fc_track_* functions' signature") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221106224841.279231-3-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Eric Biggers <ebiggers@google.com> commit 0fbcb525 upstream. fast-commit of create, link, and unlink operations in encrypted directories is completely broken because the unencrypted filenames are being written to the fast-commit journal instead of the encrypted filenames. These operations can't be replayed, as encryption keys aren't present at journal replay time. It is also an information leak. Until if/when we can get this working properly, make encrypted directory operations ineligible for fast-commit. Note that fast-commit operations on encrypted regular files continue to be allowed, as they seem to work. Fixes: aa75f4d3 ("ext4: main fast-commit commit path") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221106224841.279231-2-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Ye Bin <yebin10@huawei.com> commit 1b45cc5c upstream. For scan loop must ensure that at least EXT4_FC_TAG_BASE_LEN space. If remain space less than EXT4_FC_TAG_BASE_LEN which will lead to out of bound read when mounting corrupt file system image. ADD_RANGE/HEAD/TAIL is needed to add extra check when do journal scan, as this three tags will read data during scan, tag length couldn't less than data length which will read. Cc: stable@kernel.org Signed-off-by:
Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220924075233.2315259-4-yebin10@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Ye Bin <yebin10@huawei.com> commit dcc58274 upstream. Factor out ext4_fc_get_tl() to fill 'tl' with host byte order. Signed-off-by:
Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220924075233.2315259-3-yebin10@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Ye Bin <yebin10@huawei.com> commit fdc2a3c7 upstream. Introduce EXT4_FC_TAG_BASE_LEN helper for calculate length of struct ext4_fc_tl. Signed-off-by:
Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220924075233.2315259-2-yebin10@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Jan Kara <jack@suse.cz> commit 4978c659 upstream. We use jbd_debug() in some places in ext4. It seems a bit strange to use jbd2 debugging output function for ext4 code. Also these days ext4_debug() uses dynamic printk so each debug message can be enabled / disabled on its own so the time when it made some sense to have these combined (to allow easier common selecting of messages to report) has passed. Just convert all jbd_debug() uses in ext4 to ext4_debug(). Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Link: https://lore.kernel.org/r/20220608112355.4397-1-jack@suse.cz Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
From: Ritesh Harjani <riteshh@linux.ibm.com> commit c864ccd1 upstream. Below commit removed all references of EXT4_FC_COMMIT_FAILED. commit 0915e464 ("ext4: simplify updating of fast commit stats") Just remove it since it is not used anymore. Signed-off-by:
Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/c941357e476be07a1138c7319ca5faab7fb80fc6.1647057583.git.riteshh@linux.ibm.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zheng Yejian authored
commit ff4837f7 upstream. The maximum number of synthetic fields supported is defined as SYNTH_FIELDS_MAX which value currently is 64, but it actually fails when try to generate a synthetic event with 64 fields by executing like: # echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\ int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\ int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\ int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\ int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\ int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\ int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\ int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\ int v63; int v64" >> /sys/kernel/tracing/synthetic_events Correct the field counting to fix it. Link: https://lore.kernel.org/linux-trace-kernel/20221207091557.3137904-1-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Cc: <zanussi@kernel.org> Cc: stable@vger.kernel.org Fixes: c9e759b1 ("tracing: Rework synthetic event command parsing") Signed-off-by:
Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> [Fix conflict due to lack of c24be24a ] Signed-off-by:
Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 2820e5d0 upstream. dd_finish_request() tests if the per prio fifo_list is not empty to determine if request dispatching must be restarted for handling blocked write requests to zoned devices with a call to blk_mq_sched_mark_restart_hctx(). While simple, this implementation has 2 problems: 1) Only the priority level of the completed request is considered. However, writes to a zone may be blocked due to other writes to the same zone using a different priority level. While this is unlikely to happen in practice, as writing a zone with different IO priorirites does not make sense, nothing in the code prevents this from happening. 2) The use of list_empty() is dangerous as dd_finish_request() does not take dd->lock and may run concurrently with the insert and dispatch code. Fix these 2 problems by testing the write fifo list of all priority levels using the new helper dd_has_write_work(), and by testing each fifo list using list_empty_careful(). Fixes: c807ab52 ("block/mq-deadline: Add I/O priority support") Cc: <stable@vger.kernel.org> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-2-damien.lemoal@opensource.wdc.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 81d0bcf9 upstream. Only apply the static threshold for Stoney and Carrizo. This hardware has certain requirements that don't allow mixing of GTT and VRAM. Newer asics do not have these requirements so we should be able to be more flexible with where buffers end up. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2270 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2291 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2255 Acked-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 1d4624cd upstream. Some special polaris 10 chips overlap with the polaris11 DID range. Handle this properly in the driver. v2: use local flags for other function calls. Acked-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit cc12a6f2 upstream. Now, extended attribute value maximum length is 64K. The memory requested here does not need continuous physical addresses, so it is appropriate to use kvmalloc to request memory. At the same time, it can also cope with the situation that the extended attribute will become longer in the future. Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221208023233.1231330-3-yebin@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 8994d113 upstream. When expanding inode space in ext4_expand_extra_isize_ea() we may need to allocate external xattr block. If quota is not initialized for the inode, the block allocation will not be accounted into quota usage. Make sure the quota is initialized before we try to expand inode space. Reported-by:
Pengfei Xu <pengfei.xu@intel.com> Link: https://lore.kernel.org/all/Y5BT+k6xWqthZc1P@xpf.sh.intel.com Signed-off-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20221207115937.26601-2-jack@suse.cz Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 1485f726 upstream. Make sure we initialize quotas before possibly expanding inode space (and thus maybe needing to allocate external xattr block) in ext4_ioctl_setproject(). This prevents not accounting the necessary block allocation. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20221207115937.26601-1-jack@suse.cz Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit e4db04f7 upstream. There is issue as follows when do setxattr with inject fault: [localhost]# fsck.ext4 -fn /dev/sda e2fsck 1.46.6-rc1 (12-Sep-2022) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Unattached zero-length inode 15. Clear? no Unattached inode 15 Connect to /lost+found? no Pass 5: Checking group summary information /dev/sda: ********** WARNING: Filesystem still has errors ********** /dev/sda: 15/655360 files (0.0% non-contiguous), 66755/2621440 blocks This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()' fails, dropping i_nlink of the inode is needed. Or will lead to inode leak. Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221208023233.1231330-5-yebin@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit 5c099c4f upstream. Syzbot report follow issue: ------------[ cut here ]------------ kernel BUG at fs/ext4/inline.c:227! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3629 Comm: syz-executor212 Not tainted 6.1.0-rc5-syzkaller-00018-g59d0d52c30d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:ext4_write_inline_data+0x344/0x3e0 fs/ext4/inline.c:227 RSP: 0018:ffffc90003b3f368 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8880704e16c0 RCX: 0000000000000000 RDX: ffff888021763a80 RSI: ffffffff821e31a4 RDI: 0000000000000006 RBP: 000000000006818e R08: 0000000000000006 R09: 0000000000068199 R10: 0000000000000079 R11: 0000000000000000 R12: 000000000000000b R13: 0000000000068199 R14: ffffc90003b3f408 R15: ffff8880704e1c82 FS: 000055555723e3c0(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffe8ac9080 CR3: 0000000079f81000 CR4: 0000000000350ee0 Call Trace: <TASK> ext4_write_inline_data_end+0x2a3/0x12f0 fs/ext4/inline.c:768 ext4_write_end+0x242/0xdd0 fs/ext4/inode.c:1313 ext4_da_write_end+0x3ed/0xa30 fs/ext4/inode.c:3063 generic_perform_write+0x316/0x570 mm/filemap.c:3764 ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:285 ext4_file_write_iter+0x8bc/0x16e0 fs/ext4/file.c:700 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_iter_write+0x74/0xa0 fs/read_write.c:902 iter_file_splice_write+0x745/0xc90 fs/splice.c:686 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x114/0x180 fs/splice.c:931 splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886 do_splice_direct+0x1ab/0x280 fs/splice.c:974 do_sendfile+0xb19/0x1270 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1d0/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ---[ end trace 0000000000000000 ]--- Above issue may happens as follows: ext4_da_write_begin ext4_da_write_inline_data_begin ext4_da_convert_inline_data_to_extent ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); ext4_da_write_end ext4_run_li_request ext4_mb_prefetch ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_mark_group_bitmap_corrupted(sb, block_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT) percpu_counter_sub(&sbi->s_freeclusters_counter,grp->bb_free); -> sbi->s_freeclusters_counter become zero ext4_da_write_begin if (ext4_nonda_switch(inode->i_sb)) -> As freeclusters_counter is zero will return true *fsdata = (void *)FALL_BACK_TO_NONDELALLOC; ext4_write_begin ext4_da_write_end if (write_mode == FALL_BACK_TO_NONDELALLOC) ext4_write_end if (inline_data) ext4_write_inline_data_end ext4_write_inline_data BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); -> As inode is already convert to extent, so 'pos + len' > inline_size -> then trigger BUG. To solve this issue, instead of checking ext4_has_inline_data() which is only cleared after data has been written back, check the EXT4_STATE_MAY_INLINE_DATA flag in ext4_write_end(). Fixes: f19d5870 ("ext4: add normal write support for inline data") Reported-by:
<syzbot+4faa160fa96bfba639f8@syzkaller.appspotmail.com> Reported-by:
Jun Nie <jun.nie@linaro.org> Signed-off-by:
Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20221206144134.1919987-1-yebin@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit b40ebaf6 upstream. Commit fb0a387d ("ext4: limit block allocations for indirect-block files to < 2^32") added code to try to allocate xattr block with 32-bit block number for indirect block based files on the grounds that these files cannot use larger block numbers. It also added BUG_ON when allocated block could not fit into 32 bits. This is however bogus reasoning because xattr block is stored in inode->i_file_acl and inode->i_file_acl_hi and as such even indirect block based files can happily use full 48 bits for xattr block number. The proper handling seems to be there basically since 64-bit block number support was added. So remove the bogus limitation and BUG_ON. Cc: Eric Sandeen <sandeen@redhat.com> Fixes: fb0a387d ("ext4: limit block allocations for indirect-block files to < 2^32") Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221121130929.32031-1-jack@suse.cz Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luís Henriques authored
commit 26d75a16 upstream. If a block is out of range in ext4_get_branch(), -ENOMEM will be returned to user-space. Obviously, this error code isn't really useful. This patch fixes it by making sure the right error code (-EFSCORRUPTED) is propagated to user-space. EUCLEAN is more informative than ENOMEM. Signed-off-by:
Luís Henriques <lhenriques@suse.de> Link: https://lore.kernel.org/r/20221109181445.17843-1-lhenriques@suse.de Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baokun Li authored
commit 0aeaa255 upstream. When a backup superblock is updated in update_backups(), the primary superblock's offset in the group (that is, sbi->s_sbh->b_blocknr) is used as the backup superblock's offset in its group. However, when the block size is 1K and bigalloc is enabled, the two offsets are not equal. This causes the backup group descriptors to be overwritten by the superblock in update_backups(). Moreover, if meta_bg is enabled, the file system will be corrupted because this feature uses backup group descriptors. To solve this issue, we use a more accurate ext4_group_first_block_no() as the offset of the backup superblock in its group. Fixes: d77147ff ("ext4: add support for online resizing with bigalloc") Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20221117040341.1380702-4-libaokun1@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Whitney authored
commit 131294c3 upstream. When converting files with inline data to extents, delayed allocations made on a file system created with both the bigalloc and inline options can result in invalid extent status cache content, incorrect reserved cluster counts, kernel memory leaks, and potential kernel panics. With bigalloc, the code that determines whether a block must be delayed allocated searches the extent tree to see if that block maps to a previously allocated cluster. If not, the block is delayed allocated, and otherwise, it isn't. However, if the inline option is also used, and if the file containing the block is marked as able to store data inline, there isn't a valid extent tree associated with the file. The current code in ext4_clu_mapped() calls ext4_find_extent() to search the non-existent tree for a previously allocated cluster anyway, which typically finds nothing, as desired. However, a side effect of the search can be to cache invalid content from the non-existent tree (garbage) in the extent status tree, including bogus entries in the pending reservation tree. To fix this, avoid searching the extent tree when allocating blocks for bigalloc + inline files that are being converted from inline to extent mapped. Signed-off-by:
Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20221117152207.2424-1-enwlinux@gmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit fae381a3 upstream. Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'. Reported-by:
<syzbot+98346927678ac3059c77@syzkaller.appspotmail.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221107015335.2524319-1-yebin@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit 7ea71af9 upstream. Syzbot found the following issue: ===================================================== BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 evict+0x365/0x9a0 fs/inode.c:664 iput_final fs/inode.c:1747 [inline] iput+0x985/0xdd0 fs/inode.c:1773 __ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361 ext4_mknod+0x376/0x840 fs/ext4/namei.c:2844 vfs_mknod+0x79d/0x830 fs/namei.c:3914 do_mknodat+0x47d/0xaa0 __do_sys_mknodat fs/namei.c:3992 [inline] __se_sys_mknodat fs/namei.c:3989 [inline] __ia32_sys_mknodat+0xeb/0x150 fs/namei.c:3989 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f1/0xe80 mm/page_alloc.c:5578 alloc_pages+0xaae/0xd80 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x1b5/0x1010 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0x10c3/0x2d60 mm/slub.c:3180 __slab_alloc mm/slub.c:3279 [inline] slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x6f3/0xb30 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3117 [inline] ext4_alloc_inode+0x5f/0x860 fs/ext4/super.c:1321 alloc_inode+0x83/0x440 fs/inode.c:259 new_inode_pseudo fs/inode.c:1018 [inline] new_inode+0x3b/0x430 fs/inode.c:1046 __ext4_new_inode+0x2a7/0x7ec0 fs/ext4/ialloc.c:959 ext4_mkdir+0x4d5/0x1560 fs/ext4/namei.c:2992 vfs_mkdir+0x62a/0x870 fs/namei.c:4035 do_mkdirat+0x466/0x7b0 fs/namei.c:4060 __do_sys_mkdirat fs/namei.c:4075 [inline] __se_sys_mkdirat fs/namei.c:4073 [inline] __ia32_sys_mkdirat+0xc4/0x120 fs/namei.c:4073 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 ===================================================== Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after 6bc0d63d commit will access 'ei->i_flags' in 'ext4_evict_inode()' which will lead to access uninit-value. To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'. Reported-by:
<syzbot+57b25da729eb0b88177d@syzkaller.appspotmail.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Fixes: 6bc0d63d ("ext4: remove EA inode entry from mbcache on inode eviction") Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221117073603.2598882-1-yebin@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 594bc43b upstream. When space at the end of fast-commit journal blocks is unused, make sure to zero it out so that uninitialized memory is not leaked to disk. Fixes: aa75f4d3 ("ext4: main fast-commit commit path") Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221106224841.279231-4-ebiggers@kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baokun Li authored
commit 991ed014 upstream. We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:203! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 945 Comm: cat Not tainted 6.0.0-next-20221007-dirty #349 RIP: 0010:ext4_es_end.isra.0+0x34/0x42 RSP: 0018:ffffc9000143b768 EFLAGS: 00010203 RAX: 0000000000000000 RBX: ffff8881769cd0b8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8fc27cf7 RDI: 00000000ffffffff RBP: ffff8881769cd0bc R08: 0000000000000000 R09: ffffc9000143b5f8 R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881769cd0a0 R13: ffff8881768e5668 R14: 00000000768e52f0 R15: 0000000000000000 FS: 00007f359f7f05c0(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f359f5a2000 CR3: 000000017130c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __es_tree_search.isra.0+0x6d/0xf5 ext4_es_cache_extent+0xfa/0x230 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_mpage_readpages+0x48e/0xe40 ext4_readahead+0x47/0x50 read_pages+0x82/0x530 page_cache_ra_unbounded+0x199/0x2a0 do_page_cache_ra+0x47/0x70 page_cache_ra_order+0x242/0x400 ondemand_readahead+0x1e8/0x4b0 page_cache_sync_ra+0xf4/0x110 filemap_get_pages+0x131/0xb20 filemap_read+0xda/0x4b0 generic_file_read_iter+0x13a/0x250 ext4_file_read_iter+0x59/0x1d0 vfs_read+0x28f/0x460 ksys_read+0x73/0x160 __x64_sys_read+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== In the above issue, ioctl invokes the swap_inode_boot_loader function to swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and disordered extents, and i_nlink is set to 1. The extents check for inode in the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO. While links_count is set to 1, the extents are not initialized in swap_inode_boot_loader. After the ioctl command is executed successfully, the extents are swapped to inode<12>, in this case, run the `cat` command to view inode<12>. And Bug_ON is triggered due to the incorrect extents. When the boot loader inode is not initialized, its imode can be one of the following: 1) the imode is a bad type, which is marked as bad_inode in ext4_iget and set to S_IFREG. 2) the imode is good type but not S_IFREG. 3) the imode is S_IFREG. The BUG_ON may be triggered by bypassing the check in cases 1 and 2. Therefore, when the boot loader inode is bad_inode or its imode is not S_IFREG, initialize the inode to avoid triggering the BUG. Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-5-libaokun1@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Yi authored
commit 318cdc82 upstream. In ext4_evict_inode(), if we evicting an inode in the 'no_delete' path, it cannot be raced by another mark_inode_dirty(). If it happens, someone else may accidentally dirty it without holding inode refcount and probably cause use-after-free issues in the writeback procedure. It's indiscoverable and hard to debug, so add an WARN_ON_ONCE() to check and detect this issue in advance. Suggested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220629112647.4141034-2-yi.zhang@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit 1da18e38 upstream. When bigalloc is enabled, reserved cluster accounting for delayed allocation is handled in extent_status.c. With a corrupted file system, it's possible for this accounting to be incorrect, dsicovered by Syzbot: EXT4-fs error (device loop0): ext4_validate_block_bitmap:398: comm rep: bg 0: block 5: invalid block bitmap EXT4-fs (loop0): Delayed block allocation failed for inode 18 at logical offset 0 with max blocks 32 with error 28 EXT4-fs (loop0): This should not happen!! Data will be lost EXT4-fs (loop0): Total free blocks count 0 EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=32 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=2 EXT4-fs (loop0): Inode 18 (00000000845cd634): i_reserved_data_blocks (1) not cleared! Above issue happens as follows: Assume: sbi->s_cluster_ratio = 16 Step1: Insert delay block [0, 31] -> ei->i_reserved_data_blocks=2 Step2: ext4_writepages mpage_map_and_submit_extent -> return failed mpage_release_unused_pages -> to release [0, 30] ext4_es_remove_extent -> remove lblk=0 end=30 __es_remove_extent -> len1=0 len2=31-30=1 __es_remove_extent: ... if (len2 > 0) { ... if (len1 > 0) { ... } else { es->es_lblk = end + 1; es->es_len = len2; ... } if (count_reserved) count_rsvd(inode, lblk, ...); goto out; -> will return but didn't calculate 'reserved' ... Step3: ext4_destroy_inode -> trigger "i_reserved_data_blocks (1) not cleared!" To solve above issue if 'len2>0' call 'get_rsvd()' before goto out. Reported-by:
<syzbot+05a0f0ccab4a25626e38@syzkaller.appspotmail.com> Fixes: 8fcc3a58 ("ext4: rework reserved cluster accounting when invalidating pages") Signed-off-by:
Ye Bin <yebin10@huawei.com> Reviewed-by:
Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20221208033426.1832460-2-yebin@huaweicloud.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baokun Li authored
commit d3238774 upstream. We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:202! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352 RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0 RSP: 0018:ffffc90001227900 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8 RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001 R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10 R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000 FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_cache_extent+0xe2/0x210 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_getblk+0x82/0x340 ext4_bread+0x14/0x110 ext4_quota_read+0xf0/0x180 v2_read_header+0x24/0x90 v2_check_quota_file+0x2f/0xa0 dquot_load_quota_sb+0x26c/0x760 dquot_load_quota_inode+0xa5/0x190 ext4_enable_quotas+0x14c/0x300 __ext4_fill_super+0x31cc/0x32c0 ext4_fill_super+0x115/0x2d0 get_tree_bdev+0x1d2/0x360 ext4_get_tree+0x19/0x30 vfs_get_tree+0x26/0xe0 path_mount+0x81d/0xfc0 do_mount+0x8d/0xc0 __x64_sys_mount+0xc0/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_orphan_cleanup ext4_enable_quotas ext4_quota_enable ext4_iget --> get error inode <5> ext4_ext_check_inode --> Wrong imode makes it escape inspection make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode dquot_load_quota_inode vfs_setup_quota_inode --> check pass dquot_load_quota_sb v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent __es_tree_search.isra.0 ext4_es_end --> Wrong extents trigger BUG_ON In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO, the ext4_ext_check_inode check in the ext4_iget function can be bypassed, finally, the extents that are not checked trigger the BUG_ON in the __es_tree_search function. To solve this issue, check whether the inode is bad_inode in vfs_setup_quota_inode(). Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-2-libaokun1@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baokun Li authored
commit 07342ec2 upstream. Before quota is enabled, a check on the preset quota inums in ext4_super_block is added to prevent wrong quota inodes from being loaded. In addition, when the quota fails to be enabled, the quota type and quota inum are printed to facilitate fault locating. Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-3-libaokun1@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baokun Li authored
commit 63b1e9bc upstream. There are many places that will get unhappy (and crash) when ext4_iget() returns a bad inode. However, if iget the boot loader inode, allows a bad inode to be returned, because the inode may not be initialized. This mechanism can be used to bypass some checks and cause panic. To solve this problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag we'd be returning bad inode from ext4_iget(), otherwise we always return the error code if the inode is bad inode.(suggested by Jan Kara) Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-