- Aug 14, 2015
-
-
Andy Gospodarek authored
Add support to track current link status of ipv6 nexthops to match recent changes that added support for ipv4 nexthops. This takes a simple approach to track linkdown status for next-hops and simply checks the dev for the dst entry and sets proper flags that to be used in the netlink message. v2: drop use of rt6i_nhflags since it is not needed right now Signed-off-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Handle TRACE_PKT, stack can sniff them on the first port Add debubfs enrty to configure tracing for offload traffic like iWARP & iSCSI for debugging purpose. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
yalin wang authored
HWM_REVERSE() macro is unused, remove it. Signed-off-by:
yalin wang <yalin.wang2010@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Rocker driver tracks arp_tbl neighs to resolve IPv4 route nexthops. The driver uses NETEVENT_NEIGH_UPDATE for neigh adds and updates, but there is no event when the neigh is removed from the device (such as when the device goes admin down). This patches hooks ndo_neigh_destroy so the driver can know when a neigh is removed from the device. In response, the driver will purge the neigh entry from its internal tbl. I didn't find an in-tree users of ndo_neigh_destroy, so I'm not sure if this ndo is vestigial or if there are out-of-tree users. In any case, it does what I need here. An alternative design would be to generate NETEVENT_NEIGH_UPDATE event when neigh is being destroyed, setting state to NUD_NONE so driver knows neigh entry is dead. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
On sucessful probe, driver prints the switch ID. This patch changes the format of the printed ID to match what's used in sysfs phys_switch_id node. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jeremy Linton says: ==================== Enable smsc911x for use with ACPI This set of patches enables the front Ethernet port on the ARM Juno development platform when used with an ACPI enabled kernel. These patches covert the of_property* calls in the driver to the DT/ACPI agnostic device_property* calls, and add the arm hardware id to the acpi_match_table. To support the above changes I copied a couple routines from of_net into the properties.c file, and modified them to be ACPI/DT agnostic. I'm not 100% sure this is the correct location for these functions. But I think they are required to avoid having a dozen different implementations scattered across assorted Ethernet adapters that are being enabled to use ACPI properties. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeremy Linton authored
Add ACPI bindings for the smsc911x driver. Convert the DT specific calls to nonspecific device* calls, This allows the driver to work with both ACPI and DT configurations. Ethernet should now work when using ACPI on ARM Juno. Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Reviewed-by:
Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jeremy Linton authored
OF has some helper functions for parsing MAC and PHY settings. In cases where the platform is providing this information rather than the device itself, there needs to be similar functions for ACPI. These functions are slightly modified versions of the ones in of_net which can use information provided via DT or ACPI. Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuchung Cheng says: ==================== minor tail loss probe improvements This patch series enhance the tail loss probe (TLP) on some error conditions. When TLP fails to send a probe, it will no longer extend the RTO. When it fails to send a new packet because of receiver window limit, it'll try to retransmit the last packet. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
When TLP fails to send new packet because of receive window limit, it should fall back to retransmit the last packet instead. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Nandita Dukkipati <nanditad@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
If TLP was unable to send a probe, it extended the RTO to now + icsk_rto. But extending the RTO makes little sense if no TLP probe went out. With this commit, instead of extending the RTO we re-arm it relative to the transmit time of the write queue head. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Nandita Dukkipati <nanditad@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mugunthan V N says: ==================== Add AM335x PG1.0 CPSW errata workaround With commit 870915fe ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself"), CPSW on AM335x beagle bone white is broken as there is a errata for AM335x PG1.0. This patch series implements the workaround by disabling the interrupts from ARM IRQ controller for AM335x SoC in addition to the masking of interrupts in CPSW. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
CPSW driver has been updated with compatibles for enabling errata workarounds. So updating cpsw compatibles. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
CPSW driver has been updated with compatibles for enabling errata workarounds. So updating cpsw compatibles. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
As per Am335x Errata [1] Advisory 1.0.9, The CPSW C0_TX_PEND and C0_RX_PEND interrupt outputs provide a single transmit interrupt that combines transmit channel interrupts TXPEND[7:0] and a single receive interrupt that combines receive channel interrupts RXPEND[7:0]. The TXPEND[0] and RXPEND[0] interrupt outputs are connected to the ARM Cortex-A8 interrupt controller (INTC) rather than the C0_TX_PEND and C0_RX_PEND interrupt outputs. So even though CPSW interrupt is cleared by writing appropriate values to EOI register the interrupt is not cleared in IRQ controller. So interrupt is still pending and CPU is struck in ISR, the workaround is to disable the interrupts in ARM irq controller. [1] http://www.ti.com/lit/er/sprz360f/sprz360f.pdf Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: - two stable fixes for corruption seen in a snapshot of thinp metadata; metadata snapshots aren't widely used but help provide a consistent view of the metadata associated with an active thin-pool. - a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq" * tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: move 'dm-cache-default' module alias to SMQ dm btree: add ref counting ops for the leaves of top level btrees dm thin metadata: delete btrees when releasing metadata snapshot
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull xen block driver fixes from Jens Axboe: "A few small bug fixes for xen-blk{front,back} that have been sitting over my vacation" * 'for-linus' of git://git.kernel.dk/linux-block: xen-blkback: replace work_pending with work_busy in purge_persistent_gnt() xen-blkfront: don't add indirect pages to list when !feature_persistent xen-blkfront: introduce blkfront_gather_backend_features()
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen bug fixes from David Vrabel: - revert a fix from 4.2-rc5 that was causing lots of WARNING spam. - fix a memory leak affecting backends in HVM guests. - fix PV domU hang with certain configurations. * tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Don't leak memory when unmapping the ring on HVM backend Revert "xen/events/fifo: Handle linked events when closing a port" x86/xen: build "Xen PV" APIC driver for domU as well
-
Linus Torvalds authored
This reverts commits 9a036b93 ("x86/signal/64: Remove 'fs' and 'gs' from sigcontext") and c6f20629 ("x86/signal/64: Fix SS handling for signals delivered to 64-bit programs"). They were cleanups, but they break dosemu by changing the signal return behavior (and removing 'fs' and 'gs' from the sigcontext struct - while not actually changing any behavior - causes build problems). Reported-and-tested-by:
Stas Sergeev <stsp@list.ru> Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi devices, from Emmanuel Grumbach. 2) Falling back to vmalloc in conntrack should not emit a warning, from Pablo Neira Ayuso. 3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis Felipe Dominguez Vega. 4) Rocker doesn't free netdev on device removal, from Ido Schimmel. 5) UDP multicast early sock demux has route handling races, from Eric Dumazet. 6) Fix L4 checksum handling in openvswitch, from Glenn Griffin. 7) Fix use-after-free in skb_set_peeked, from Herbert Xu. 8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead to fraglists longer than the driver can support. From Jason Wang. 9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto. 10) Fix interrupt storm in bna driver, from Ivan Vecera. 11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann. 12) Fix inet request sock leak, from Eric Dumazet. 13) Fix TX interrupt masking and marking in TX descriptors of fs_enet driver, from LEROY Christophe. 14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely to get fixed any time soon. From Jakub Kicinski * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) cosa: missing error code on failure in probe() gianfar: remove faulty filer optimizer gianfar: correct list membership accounting gianfar: correct filer table writing bonding: Gratuitous ARP gets dropped when first slave added net: dsa: Do not override PHY interface if already configured net: fs_enet: mask interrupts for TX partial frames. net: fs_enet: explicitly remove I flag on TX partial frames inet: fix possible request socket leak inet: fix races with reqsk timers mkiss: Fix error handling in mkiss_open() bnx2x: Free NVRAM lock at end of each page bnx2x: Prevent null pointer dereference on SKB release cxgb4: missing curly braces in t4_setup_debugfs() net-timestamp: Update skb_complete_tx_timestamp comment ipv6: don't reject link-local nexthop on other interface netlink: make sure -EBUSY won't escape from netlink_insert bna: fix interrupts storm caused by erroneous packets net: mvpp2: replace TX coalescing interrupts with hrtimer net: mvpp2: enable proper per-CPU TX buffers unmapping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC fix from Borislav Petkov: "A ppc4xx_edac fix for accessing ->csrows properly. This driver was missed during the conversion a couple of years ago" * tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, ppc4xx: Access mci->csrows array elements properly
-
- Aug 13, 2015
-
-
Michael Walle authored
The commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by:
Michael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc Signed-off-by:
Borislav Petkov <bp@suse.de>
-
Dan Carpenter authored
If register_hdlc_device() fails, the current code returns 0 but we should return an error code instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rick Jones authored
A few things have changed since the previous version of the vxlan documentation was written, so update it and correct some grammar and such while we are at it. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
There is no need to use the IS_ERR_VALUE() macro for checking the return value from pm_runtime_* functions. Just do a simple negative test instead. The semantic patch that makes this change is available in scripts/coccinelle/api/pm_runtime.cocci. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei-Chun Chao authored
Verifier rejects programs incorrectly. Fixes: 35578d79 ("bpf: Implement function bpf_perf_event_read()") Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
Wei-Chun Chao <weichunc@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== Add some more debug info This patch series adds the following. Add more info for sge_qinfo dump Differentiate tid and stids between different regions, and add a debugfs entry to dump all the tid info This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Add debugfs support to dump tid info like stid, sftid, tids, atid and hwtids Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
For T4 adapter, offloaded servers tid for IPv4 connections are allocated from filter region. So add a new field for server filter tid if server tid is allocated from filter region. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
For the tid info, differentiate from which region the TID is allocated from. It can be from TCAM region or HASH region. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Adding more details to sge qinfo for debugging purpose. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
When a system has multiple ethernet devices and during DHCP request (for using NFS), the system waits only for HZ/2 which is 500mS before switching to another interface for DHCP. There are some routers (Ex: Trendnet routers) which responds to DHCP request at about 560mS. When the system has only one ethernet interface there is no issue as the timeout is 2S and the dev xid doesn't changes and only retries. But when the system has multiple Ethernet like DRA74x with CPSW in dual EMAC mode, the DHCP response is dropped as the dev xid changes while shifting to the next device. So changing inter device timeout to HZ (which is 1S). Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kaixu Xia authored
There are two improvements in this patch: 1. Fix the build warnings; 2. Add function read_trace_pipe() to print the result on the screen; Before this patch, we can get the result through /sys/kernel/de bug/tracing/trace_pipe and get nothing on the screen. By applying this patch, the result can be printed on the screen. $ ./tracex6 ... tracex6-705 [003] d..1 131.428593: : CPU-3 19981414 sshd-683 [000] d..1 131.428727: : CPU-0 221682321 sshd-683 [000] d..1 131.428821: : CPU-0 221808766 sshd-683 [000] d..1 131.428950: : CPU-0 221982984 sshd-683 [000] d..1 131.429045: : CPU-0 222111851 tracex6-705 [003] d..1 131.429168: : CPU-3 20757551 sshd-683 [000] d..1 131.429170: : CPU-0 222281240 sshd-683 [000] d..1 131.429261: : CPU-0 222403340 sshd-683 [000] d..1 131.429378: : CPU-0 222561024 ... Signed-off-by:
Kaixu Xia <xiakaixu@huawei.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ron Angeles authored
This BQL implementation is mostly derived from its related driver, alx. Tested on AR8131 (rev c0) [1969:1063]. Saturated a 100mbps link with 5 concurrent runs of netperf. Ping latency dropped from 14ms to 3ms. Signed-off-by:
Ron Angeles <ronangeles@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== gianfar: filer changes respinning with examples as requested. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by:
Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Acked-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Schwartzmeyer authored
This enables the use of ethtool --set-channels devname combined N to change the number of vRSS queues. Separate rx, tx, and other parameters are not supported. The maximum is rsscap.num_recv_que. It passes the given value to rndis_filter_device_add through the device_info->num_chn field. If the procedure fails, it attempts to recover to the prior state. If the recovery fails, it logs an error and aborts. Current num_chn is saved and restored when changing the MTU. Signed-off-by:
Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-