- Apr 11, 2015
-
-
Mike Christie authored
This fixes a oops due to a double list add when adding a reject PDU for iscsit_allocate_iovecs allocation failures. The cmd has already been added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call iscsit_reject_cmd. Note that for ERL0 the reject PDU is not actually sent, so this patch is not completely tested. Just verified we do not oops. The problem is the add reject functions return -1 which is returned all the way up to iscsi_target_rx_thread which for ERL0 will drop the connection. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Apr 08, 2015
-
-
Andy Grover authored
"The domainname can be specified as either a DNS host name, a dotted-decimal IPv4 address, or a bracketed IPv6 address as specified in [RFC2732]." See https://bugzilla.redhat.com/show_bug.cgi?id=1206868 Reported-by:
Kyle Brantley <kyle@averageurl.com> Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Apr 02, 2015
-
-
Andy Grover authored
Before 4.0, reading attrib/emulate_fua_write has returned 1. Saved configs created on a pre-4.0 kernel will try to write that back when restoring LIO configuration. This should succeed with no effect, and issue a warning. See https://bugzilla.redhat.com/show_bug.cgi?id=1206184 Reported-by:
Yanko Kaneti <yaneti@declera.com> Reported-by:
Juan Quintela <quintela@redhat.com> Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Mar 20, 2015
-
-
Christophe Vu-Brugier authored
A check that rejects a CDB with FUA bit set if no write cache is emulated was added by the following commit: fde9f50f target: Add sanity checks for DPO/FUA bit usage The condition is as follows: if (!dev->dev_attrib.emulate_fua_write || !dev->dev_attrib.emulate_write_cache) However, this check is wrong if the backend device supports WCE but "emulate_write_cache" is disabled. This patch uses se_dev_check_wce() (previously named spc_check_dev_wce) to invoke transport->get_write_cache() if the device has a write cache or check the "emulate_write_cache" attribute otherwise. Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch fixes a NULL pointer dereference triggered by a late target_configure_device() -> alloc_workqueue() failure that results in target_free_device() being called with DF_CONFIGURED already set, which subsequently OOPses in destroy_workqueue() code. Currently this only happens at modprobe target_core_mod time when core_dev_setup_virtual_lun0() -> target_configure_device() fails, and the explicit target_free_device() gets called. To address this bug originally introduced by commit 0fd97ccf , go ahead and move DF_CONFIGURED to end of target_configure_device() code to handle this special failure case. Reported-by:
Claudio Fleiner <cmf@daterainc.com> Cc: Claudio Fleiner <cmf@daterainc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch fixes a NULL pointer dereference OOPs with pSCSI backends within target_core_stat.c code. The bug is caused by a configfs attr read if no pscsi_dev_virt->pdv_sd has been configured. Reported-by:
Olaf Hering <olaf@aepfle.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Dan Carpenter authored
This patch adds a missing set of conditional check braces in ft_invl_hw_context() originally introduced by commit dcd998cc when handling DDP failures in ft_recv_write_data() code. commit dcd998cc Author: Kiran Patil <kiran.patil@intel.com> Date: Wed Aug 3 09:20:01 2011 +0000 tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down is true within target_get_sess_cmd() submission path code. This se_cmd reference leak can occur during active session shutdown when ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
This patch changes loopback, usb-gadget, vhost-scsi and xen-scsiback fabric code to invoke transport_register_session() instead of the unprotected flavour, to ensure se_tpg->session_lock is taken when adding new session list nodes to se_tpg->tpg_sess_list. Note that since these four fabric drivers already hold their own internal TPG mutexes when accessing se_tpg->tpg_sess_list, and consist of a single se_session created through configfs attribute access, no list corruption can currently occur. So for correctness sake, go ahead and use the se_tpg->session_lock protected version for these four fabric drivers. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
This patch fixes the incorrect use of __transport_register_session() in tcm_qla2xxx_check_initiator_node_acl() code, that does not perform explicit se_tpg->session_lock when accessing se_tpg->tpg_sess_list to add new se_sess nodes. Given that tcm_qla2xxx_check_initiator_node_acl() is not called with qla_hw->hardware_lock held for all accesses of ->tpg_sess_list, the code should be using transport_register_session() instead. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: <stable@vger.kernel.org> # 3.5+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch fixes a iser specific logout bug where early complete() of conn->conn_logout_comp in iscsit_close_connection() was causing isert_wait4logout() to complete too soon, triggering a use after free NULL pointer dereference of iscsi_conn memory. The complete() was originally added for traditional iscsi-target when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given iser-target does not wait in logout failure, this special case needs to be avoided. Reported-by:
Sagi Grimberg <sagig@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Slava Shwartsman <valyushash@gmail.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This reverts commit 72859d91 . The original patch was wrong, iscsit_close_connection() still needs to release iscsi_conn during both normal + exception IN_LOGOUT status with ib_isert enabled. The original OOPs is due to completing conn_logout_comp early within iscsit_close_connection(), causing isert_wait4logout() to complete instead of waiting for iscsit_logout_post_handler_*() to be called. Reported-by:
Sagi Grimberg <sagig@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Slava Shwartsman <valyushash@gmail.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
Now that incoming FUA=1 bit check is enforced for backends with FUA or WCE disabled, go ahead and disallow the changing of related backend attributes when active fabric exports exist. This is required to avoid potential failures with existing initiator LUN registrations that have been previously created with FUA=1. Reported-by:
Christoph Hellwig <hch@lst.de> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
- Feb 23, 2015
-
-
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a...
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Introduce some function for getting the inode (and also the dentry) in an environment where layered/unioned filesystems are in operation. The problem is that we have places where we need *both* the union dentry and the lower source or workspace inode or dentry available, but we can only have a handle on one of them. Therefore we need to derive the handle to the other from that. The idea is to introduce an extra field in struct dentry that allows the union dentry to refer to and pin the lower dentry. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- Feb 22, 2015
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A few fixes that came in too late to make it into the first set of pull requests but would still be nice to have in -rc1. The majority of these are trivial build fixes for bugs that I found myself using randconfig testing, and a set of two patches from Uwe to mark DT strings as 'const' where appropriate, to resolve inconsistent section attributes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: make of_device_ids const ARM: make arrays containing machine compatible strings const ARM: mm: Remove Kconfig symbol CACHE_PL310 ARM: rockchip: force built-in regulator support for PM ARM: mvebu: build armada375-smp code conditionally ARM: sti: always enable RESET_CONTROLLER ARM: rockchip: make rockchip_suspend_init conditional ARM: ixp4xx: fix {in,out}s{bwl} data types ARM: prima2: do not select SMP_ON_UP ARM: at91: fix pm declarations ARM: davinci: multi-soc kernels require AUTO_ZRELADDR ARM: davinci: davinci_cfg_reg cannot be init ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile ARM: vexpress: use ARM_CPU_SUSPEND if needed ARM: dts: add I2C device nodes for Broadcom Cygnus ARM: dts: BCM63xx: fix L2 cache properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI patches from James Bottomley: "This is a short patch set representing a couple of left overs from the merge window (debug removal and MAINTAINER changes). Plus one merge window regression (the local workqueue for hpsa) and a set of bug fixes for several issues (two for scsi-mq and the rest an assortment of long standing stuff, all cc'd to stable)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sg: fix EWOULDBLOCK errors with scsi-mq sg: fix unkillable I/O wait deadlock with scsi-mq sg: fix read() error reporting wd719x: add missing .module to wd719x_template hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. fcoe: Transition maintainership to Vasu am53c974: remove left-over debugging code
-
Linus Torvalds authored
Merge tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs pnfs block layout support from Dave Chinner: "This contains the changes to XFS needed to support the PNFS block layout server that you pulled in through Bruce's NFS server tree merge. I originally thought that I'd need to merge changes into the NFS server side, but Bruce had already picked them up and so this is purely changes to the fs/xfs/ codebase. Summary: This update contains the implementation of the PNFS server export methods that enable use of XFS filesystems as a block layout target" * tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: recall pNFS layouts on conflicting access xfs: implement pNFS export operations
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull more NFS client updates from Trond Myklebust: "Highlights include: - Fix a use-after-free in decode_cb_sequence_args() - Fix a compile error when #undef CONFIG_PROC_FS - NFSv4.1 backchannel spinlocking issue - Cleanups in the NFS unstable write code requested by Linus - NFSv4.1 fix issues when the server denies our backchannel request - Cleanups in create_session and bind_conn_to_session" * tag 'nfs-for-3.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Clean up bind_conn_to_session NFSv4.1: Always set up a forward channel when binding the session NFSv4.1: Don't set up a backchannel if the server didn't agree to do so NFSv4.1: Clean up create_session pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit NFSv4: Kill unused nfs_inode->delegation_state field NFS: struct nfs_commit_info.lock must always point to inode->i_lock nfs: Can call nfs_clear_page_commit() instead nfs: Provide and use helper functions for marking a page as unstable SUNRPC: Always manipulate rpc_rqst::rq_bc_pa_list under xprt->bc_pa_lock SUNRPC: Fix a compile error when #undef CONFIG_PROC_FS NFSv4.1: Convert open-coded array allocation calls to kmalloc_array() NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull one more batch of power management and ACPI updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged recent PM and ACPI material. First, one commit that broke the ACPI LPSS (Low-Power Subsystem) driver on a Dell box is reverted and there are two stable-candidate fixes for that driver. Another fix cleans up two recently added ACPI EC messages that look odd and the printk level of a noisy debug message in the core ACPI resources handling code is reduced. In addition to that we have two stable-candidate fixes for the s3c cpufreq driver, two cpuidle powernv driver updates related to Device Trees and a PNP subsystem cleanup that will allow us to get rid of some old ugliness going forward. Also there is a new blacklist entry for the ACPI backlight code. Specifics: - Revert a recent ACPI LPSS driver commit that prevented the touchpad driver from loading on Dell XPS13 (Jarkko Nikula). - Make the ACPI LPSS driver disable the I2C controllers and deassert SPI host controllers resets at startup on Intel BayTrail and Braswell SoCs in case they have been left in wrong states by the platform firmware which then may casuse fatal controller driver failures during resume from hibernation (Mika Westerberg). - Make two recently added ACPI EC messages look better (Scot Doyle). - Reduce the printk level of a recently added debug message related to ACPI resources that may become noisy in some cases (Rafael J Wysocki). - Add a new ACPI backlight blacklist entry for Samsung Series 9 (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native backlight interface doesn't work while the ACPI based one does (Jens Reyer). - Make the PNP sybsystem's core code use __request_region() followed by __release_region() instead of __check_region() which then will allow us to get rid of the latter as it has no more users (Jakub Sitnicki). - Fix a build breakage and an issue with two __init functions that may be called after initialization in the s3c cpufreq driver (Arnd Bergmann). - Make the powernv cpuidle driver read target_residency values for idle states from a Device Tree (as we have the suitable DT bindings for that now) and improve the parsing of the powermgmt DT node in that driver (Preeti U Murthy)" * tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: powernv: Avoid endianness conversions while parsing DT cpufreq: s3c: remove last use of resume_clocks callback cpufreq: s3c: remove incorrect __init annotations ACPI / LPSS: Deassert resets for SPI host controllers on Braswell ACPI / LPSS: Always disable I2C host controllers ACPI / resources: Change pr_info() to pr_debug() for debug information ACPI / video: Disable native backlight on Samsung Series 9 laptops cpuidle: powernv: Read target_residency value of idle states from DT if available Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C" ACPI / EC: Remove non-standard log emphasis PNP: Switch from __check_region() to __request_region()
-